! Started logfile: J1924-2914_X_2017_04_28_pus_uvs.log on Mon Apr 29 14:32:35 2019 obs J1924-2914_X_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1924-2914_X_2017_04_28_pus_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.813333 visibilities/baseline/integration-bin. ! Found source: J1924-2914 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 907 lines of history. ! ! Reading 17568 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1924-2914_X_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.370616Jy sigma=0.025349 ! Fit after self-cal, rms=3.365163Jy sigma=0.025312 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.6404 mas, bmaj=1.741 mas, bpa=-4.739 degrees ! Estimated noise=1287.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.25047 Jy ! Component: 100 - total flux cleaned = 4.0044 Jy ! Total flux subtracted in 100 components = 4.0044 Jy ! Clean residual min=-0.088290 max=0.281028 Jy/beam ! Clean residual mean=-0.001409 rms=0.029342 Jy/beam ! Combined flux in latest and established models = 4.0044 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 4.0044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.747373Jy sigma=0.005578 ! Fit after self-cal, rms=0.747275Jy sigma=0.005577 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.288467 Jy ! Component: 100 - total flux cleaned = 0.439994 Jy ! Total flux subtracted in 100 components = 0.439994 Jy ! Clean residual min=-0.077863 max=0.143832 Jy/beam ! Clean residual mean=-0.001084 rms=0.019690 Jy/beam ! Combined flux in latest and established models = 4.44439 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 4.44439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.602738Jy sigma=0.003830 ! Fit after self-cal, rms=0.602656Jy sigma=0.003830 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (1, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143352 Jy ! Component: 100 - total flux cleaned = 0.226379 Jy ! Total flux subtracted in 100 components = 0.226379 Jy ! Clean residual min=-0.066684 max=0.114604 Jy/beam ! Clean residual mean=-0.000923 rms=0.016654 Jy/beam ! Combined flux in latest and established models = 4.67077 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 4.67077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.563783Jy sigma=0.003230 ! Fit after self-cal, rms=0.559741Jy sigma=0.003188 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8544 mas, bmaj=2.231 mas, bpa=-3.604 degrees ! Estimated noise=770.453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127731 Jy ! Component: 100 - total flux cleaned = 0.195185 Jy ! Component: 150 - total flux cleaned = 0.232608 Jy ! Component: 200 - total flux cleaned = 0.2536 Jy ! Total flux subtracted in 200 components = 0.2536 Jy ! Clean residual min=-0.063056 max=0.072374 Jy/beam ! Clean residual mean=-0.002757 rms=0.019663 Jy/beam ! Combined flux in latest and established models = 4.92437 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 46 components and 4.92437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.555817Jy sigma=0.002789 ! Fit after self-cal, rms=0.553492Jy sigma=0.002763 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.10 KP 1.02 ! LA 0.95 MK 0.99 NL 1.04 OV 1.01 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.13 KP 1.03 ! LA 0.95 MK 0.98 NL 1.05 OV 0.97 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.14 KP 0.97 ! LA 0.97 MK 1.00 NL 1.05 OV 1.01 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.09 KP 1.00 ! LA 0.97 MK 1.00 NL 1.04 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.10 KP 0.99 ! LA 0.96 MK 1.02 NL 1.06 OV 0.97 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.07 KP 1.00 ! LA 0.98 MK 1.00 NL 1.07 OV 0.97 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.15 KP 0.99 ! LA 0.98 MK 1.01 NL 1.05 OV 0.97 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.16 KP 0.99 ! LA 0.94 MK 0.99 NL 1.05 OV 0.97 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.16 KP 0.99 ! LA 0.98 MK 0.98 NL 1.05 OV 0.97 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.11 KP 1.01 ! LA 0.99 MK 1.01 NL 1.06 OV 0.96 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.09 KP 1.01 ! LA 0.98 MK 1.00 NL 1.07 OV 0.97 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.10 KP 0.94 ! LA 0.97 MK 1.01 NL 1.07 OV 0.98 ! PT 1.04 SC 0.98 ! ! ! Fit before self-cal, rms=0.553492Jy sigma=0.002763 ! Fit after self-cal, rms=0.503547Jy sigma=0.002273 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8582 mas, bmaj=2.231 mas, bpa=-3.396 degrees ! Estimated noise=766.046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.056624 Jy ! Component: 100 - total flux cleaned = -0.0804465 Jy ! Component: 150 - total flux cleaned = -0.0840796 Jy ! Component: 200 - total flux cleaned = -0.0863832 Jy ! Total flux subtracted in 200 components = -0.0863832 Jy ! Clean residual min=-0.062350 max=0.062989 Jy/beam ! Clean residual mean=-0.002840 rms=0.016516 Jy/beam ! Combined flux in latest and established models = 4.83799 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 4.83799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.489317Jy sigma=0.002252 ! Fit after self-cal, rms=0.488283Jy sigma=0.002243 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.488283Jy sigma=0.002243 ! Fit after self-cal, rms=0.272346Jy sigma=0.001477 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8599 mas, bmaj=2.232 mas, bpa=-3.348 degrees ! Estimated noise=763.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0163745 Jy ! Component: 100 - total flux cleaned = -0.0187021 Jy ! Component: 150 - total flux cleaned = -0.019668 Jy ! Component: 200 - total flux cleaned = -0.0196893 Jy ! Total flux subtracted in 200 components = -0.0196893 Jy ! Clean residual min=-0.033984 max=0.057703 Jy/beam ! Clean residual mean=-0.000846 rms=0.010939 Jy/beam ! Combined flux in latest and established models = 4.8183 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 4.8183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.268647Jy sigma=0.001462 ! Fit after self-cal, rms=0.268271Jy sigma=0.001460 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584601 Jy ! Component: 100 - total flux cleaned = 0.0829925 Jy ! Component: 150 - total flux cleaned = 0.087489 Jy ! Component: 200 - total flux cleaned = 0.0904972 Jy ! Total flux subtracted in 200 components = 0.0904972 Jy ! Clean residual min=-0.027474 max=0.034819 Jy/beam ! Clean residual mean=-0.000672 rms=0.008871 Jy/beam ! Combined flux in latest and established models = 4.9088 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 4.9088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.258454Jy sigma=0.001308 ! Fit after self-cal, rms=0.256415Jy sigma=0.001288 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.256415Jy sigma=0.001288 ! Fit after self-cal, rms=0.172126Jy sigma=0.001019 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8586 mas, bmaj=2.231 mas, bpa=-3.321 degrees ! Estimated noise=763.172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311587 Jy ! Component: 100 - total flux cleaned = 0.0448089 Jy ! Component: 150 - total flux cleaned = 0.0473755 Jy ! Component: 200 - total flux cleaned = 0.0473766 Jy ! Total flux subtracted in 200 components = 0.0473766 Jy ! Clean residual min=-0.018771 max=0.027994 Jy/beam ! Clean residual mean=0.000109 rms=0.006372 Jy/beam ! Combined flux in latest and established models = 4.95617 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 97 components and 4.95617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.166187Jy sigma=0.000961 ! Fit after self-cal, rms=0.165321Jy sigma=0.000953 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.8, -14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026704 Jy ! Component: 100 - total flux cleaned = 0.0426218 Jy ! Component: 150 - total flux cleaned = 0.052174 Jy ! Component: 200 - total flux cleaned = 0.0564741 Jy ! Total flux subtracted in 200 components = 0.0564741 Jy ! Clean residual min=-0.016833 max=0.024912 Jy/beam ! Clean residual mean=0.000080 rms=0.005198 Jy/beam ! Combined flux in latest and established models = 5.01265 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 138 components and 5.01265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.160983Jy sigma=0.000900 ! Fit after self-cal, rms=0.160752Jy sigma=0.000898 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (6, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236556 Jy ! Component: 100 - total flux cleaned = 0.0365337 Jy ! Component: 150 - total flux cleaned = 0.0425712 Jy ! Component: 200 - total flux cleaned = 0.0467408 Jy ! Total flux subtracted in 200 components = 0.0467408 Jy ! Clean residual min=-0.015625 max=0.020288 Jy/beam ! Clean residual mean=0.000154 rms=0.004312 Jy/beam ! Combined flux in latest and established models = 5.05939 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 172 components and 5.05939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156886Jy sigma=0.000859 ! Fit after self-cal, rms=0.156672Jy sigma=0.000858 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (10, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187177 Jy ! Component: 100 - total flux cleaned = 0.029186 Jy ! Component: 150 - total flux cleaned = 0.0357295 Jy ! Component: 200 - total flux cleaned = 0.0405283 Jy ! Total flux subtracted in 200 components = 0.0405283 Jy ! Clean residual min=-0.013479 max=0.015119 Jy/beam ! Clean residual mean=0.000139 rms=0.003704 Jy/beam ! Combined flux in latest and established models = 5.09992 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 204 components and 5.09992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154103Jy sigma=0.000831 ! Fit after self-cal, rms=0.153995Jy sigma=0.000830 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.153995Jy sigma=0.000830 ! Fit after self-cal, rms=0.153045Jy sigma=0.000819 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.328 mas, bmaj=5.868 mas, bpa=3.411 degrees ! Estimated noise=949.212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196677 Jy ! Component: 100 - total flux cleaned = 0.0338798 Jy ! Component: 150 - total flux cleaned = 0.0427561 Jy ! Component: 200 - total flux cleaned = 0.0453722 Jy ! Total flux subtracted in 200 components = 0.0453722 Jy ! Clean residual min=-0.013423 max=0.013241 Jy/beam ! Clean residual mean=0.000300 rms=0.004543 Jy/beam ! Combined flux in latest and established models = 5.14529 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 225 components and 5.14529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.152219Jy sigma=0.000806 ! Fit after self-cal, rms=0.151876Jy sigma=0.000803 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794934 Jy ! Component: 100 - total flux cleaned = 0.0103981 Jy ! Component: 150 - total flux cleaned = 0.0113437 Jy ! Component: 200 - total flux cleaned = 0.0125112 Jy ! Total flux subtracted in 200 components = 0.0125112 Jy ! Clean residual min=-0.012953 max=0.012264 Jy/beam ! Clean residual mean=0.000330 rms=0.004283 Jy/beam ! Combined flux in latest and established models = 5.1578 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 239 components and 5.1578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.152075Jy sigma=0.000802 ! Fit after self-cal, rms=0.151905Jy sigma=0.000802 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8581 mas, bmaj=2.231 mas, bpa=-3.339 degrees ! Estimated noise=763.005 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8581 x 2.231 at -3.339 degrees (North through East) ! Clean map min=-0.010465 max=4.2339 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.151905Jy sigma=0.000802 ! Fit after self-cal, rms=0.141187Jy sigma=0.000728 ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.858 mas, bmaj=2.232 mas, bpa=-3.397 degrees ! Estimated noise=763.596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388367 Jy ! Component: 100 - total flux cleaned = 0.00610349 Jy ! Component: 150 - total flux cleaned = 0.00707491 Jy ! Component: 200 - total flux cleaned = 0.00794833 Jy ! Total flux subtracted in 200 components = 0.00794833 Jy ! Clean residual min=-0.010143 max=0.014659 Jy/beam ! Clean residual mean=0.000138 rms=0.002795 Jy/beam ! Combined flux in latest and established models = 5.16575 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 254 components and 5.16575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.140064Jy sigma=0.000720 ! Fit after self-cal, rms=0.140016Jy sigma=0.000720 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (0, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117515 Jy ! Component: 100 - total flux cleaned = 0.0111238 Jy ! Component: 150 - total flux cleaned = 0.0113887 Jy ! Component: 200 - total flux cleaned = 0.0111522 Jy ! Total flux subtracted in 200 components = 0.0111522 Jy ! Clean residual min=-0.009662 max=0.009732 Jy/beam ! Clean residual mean=0.000164 rms=0.002603 Jy/beam ! Combined flux in latest and established models = 5.1769 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 273 components and 5.1769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138125Jy sigma=0.000706 ! Fit after self-cal, rms=0.138003Jy sigma=0.000704 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138003Jy sigma=0.000704 ! Fit after self-cal, rms=0.137827Jy sigma=0.000702 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.6426 mas, bmaj=1.738 mas, bpa=-4.352 degrees ! Estimated noise=1283.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.24008 Jy ! Component: 100 - total flux cleaned = 4.00216 Jy ! Component: 150 - total flux cleaned = 4.28731 Jy ! Component: 200 - total flux cleaned = 4.4431 Jy ! Total flux subtracted in 200 components = 4.4431 Jy ! Clean residual min=-0.032891 max=0.083852 Jy/beam ! Clean residual mean=-0.000506 rms=0.011634 Jy/beam ! Combined flux in latest and established models = 4.4431 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 4.4431 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8576 mas, bmaj=2.231 mas, bpa=-3.387 degrees ! Estimated noise=763.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197198 Jy ! Component: 100 - total flux cleaned = 0.312748 Jy ! Component: 150 - total flux cleaned = 0.388362 Jy ! Component: 200 - total flux cleaned = 0.43996 Jy ! Total flux subtracted in 200 components = 0.43996 Jy ! Clean residual min=-0.019140 max=0.034140 Jy/beam ! Clean residual mean=-0.000116 rms=0.007838 Jy/beam ! Combined flux in latest and established models = 4.88306 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 99 components and 4.88306 Jy ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (4.2, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.039654 Jy ! Component: 100 - total flux cleaned = 0.0713051 Jy ! Component: 150 - total flux cleaned = 0.0984481 Jy ! Component: 200 - total flux cleaned = 0.122061 Jy ! Total flux subtracted in 200 components = 0.122061 Jy ! Clean residual min=-0.013052 max=0.018130 Jy/beam ! Clean residual mean=0.000017 rms=0.005033 Jy/beam ! Combined flux in latest and established models = 5.00512 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 150 components and 5.00513 Jy ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.327 mas, bmaj=5.864 mas, bpa=3.396 degrees ! Estimated noise=951.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364808 Jy ! Component: 100 - total flux cleaned = 0.0649386 Jy ! Component: 150 - total flux cleaned = 0.0879259 Jy ! Component: 200 - total flux cleaned = 0.106666 Jy ! Total flux subtracted in 200 components = 0.106666 Jy ! Clean residual min=-0.012196 max=0.015179 Jy/beam ! Clean residual mean=0.000203 rms=0.004995 Jy/beam ! Combined flux in latest and established models = 5.11179 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153778 Jy ! Component: 100 - total flux cleaned = 0.0281091 Jy ! Component: 150 - total flux cleaned = 0.038707 Jy ! Component: 200 - total flux cleaned = 0.0475726 Jy ! Total flux subtracted in 200 components = 0.0475726 Jy ! Clean residual min=-0.010030 max=0.012826 Jy/beam ! Clean residual mean=0.000270 rms=0.003622 Jy/beam ! Combined flux in latest and established models = 5.15936 Jy ! Adding 127 model components to the UV plane model. ! The established model now contains 257 components and 5.15936 Jy ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8576 mas, bmaj=2.231 mas, bpa=-3.387 degrees ! Estimated noise=763.886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00750317 Jy ! Component: 100 - total flux cleaned = 0.011386 Jy ! Component: 150 - total flux cleaned = 0.014361 Jy ! Component: 200 - total flux cleaned = 0.0163913 Jy ! Total flux subtracted in 200 components = 0.0163913 Jy ! Clean residual min=-0.009635 max=0.009803 Jy/beam ! Clean residual mean=0.000141 rms=0.002350 Jy/beam ! Combined flux in latest and established models = 5.17576 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 282 components and 5.17576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136392Jy sigma=0.000695 ! Fit after self-cal, rms=0.135500Jy sigma=0.000687 wmodel J1924-2914_X_2017_04_28_pus_map.mod ! Writing 282 model components to file: J1924-2914_X_2017_04_28_pus_map.mod wobs J1924-2914_X_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1924-2914_X_2017_04_28_pus_uvs.fits wwins J1924-2914_X_2017_04_28_pus_map.win ! wwins: Wrote 8 windows to J1924-2914_X_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155685 Jy ! Component: 100 - total flux cleaned = 0.00408161 Jy ! Component: 150 - total flux cleaned = 0.00482979 Jy ! Component: 200 - total flux cleaned = 0.00511237 Jy ! Component: 250 - total flux cleaned = 0.00511355 Jy ! Component: 300 - total flux cleaned = 0.00537625 Jy ! Component: 350 - total flux cleaned = 0.00537201 Jy ! Component: 400 - total flux cleaned = 0.0051258 Jy ! Component: 450 - total flux cleaned = 0.00512663 Jy ! Component: 500 - total flux cleaned = 0.00535774 Jy ! Component: 550 - total flux cleaned = 0.00568962 Jy ! Component: 600 - total flux cleaned = 0.00612352 Jy ! Component: 650 - total flux cleaned = 0.00654885 Jy ! Component: 700 - total flux cleaned = 0.00696523 Jy ! Component: 750 - total flux cleaned = 0.00737179 Jy ! Component: 800 - total flux cleaned = 0.0079645 Jy ! Component: 850 - total flux cleaned = 0.00806038 Jy ! Component: 900 - total flux cleaned = 0.00853626 Jy ! Component: 950 - total flux cleaned = 0.00881848 Jy ! Component: 1000 - total flux cleaned = 0.00918496 Jy ! Component: 1050 - total flux cleaned = 0.00936438 Jy ! Component: 1100 - total flux cleaned = 0.00963006 Jy ! Component: 1150 - total flux cleaned = 0.00963066 Jy ! Component: 1200 - total flux cleaned = 0.00989023 Jy ! Component: 1250 - total flux cleaned = 0.00997449 Jy ! Component: 1300 - total flux cleaned = 0.0103935 Jy ! Component: 1350 - total flux cleaned = 0.0103923 Jy ! Component: 1400 - total flux cleaned = 0.0104736 Jy ! Component: 1450 - total flux cleaned = 0.0108767 Jy ! Component: 1500 - total flux cleaned = 0.0110343 Jy ! Component: 1550 - total flux cleaned = 0.0111919 Jy ! Component: 1600 - total flux cleaned = 0.0112693 Jy ! Component: 1650 - total flux cleaned = 0.0114232 Jy ! Component: 1700 - total flux cleaned = 0.0116506 Jy ! Component: 1750 - total flux cleaned = 0.0120263 Jy ! Component: 1800 - total flux cleaned = 0.0120266 Jy ! Component: 1850 - total flux cleaned = 0.012321 Jy ! Component: 1900 - total flux cleaned = 0.012612 Jy ! Component: 1950 - total flux cleaned = 0.0128985 Jy ! Component: 2000 - total flux cleaned = 0.0131119 Jy ! Total flux subtracted in 2048 components = 0.0132531 Jy ! Clean residual min=-0.004084 max=0.004002 Jy/beam ! Clean residual mean=0.000057 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 5.18901 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 412 components and 5.18901 Jy ![Exited script file: muppet] wmap "J1924-2914_X_2017_04_28_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8576 x 2.231 at -3.387 degrees (North through East) ! Clean map min=-0.0062424 max=4.2063 Jy/beam ! Writing clean map to FITS file: J1924-2914_X_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.2063 invert ! Inverting map ! Your choice of large map pixels excluded 0.154% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0013341 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.09515 0.09515 0.1903 0.3806 0.7612 1.5224 3.0448 6.0896 12.1792 24.3584 48.7168 97.4336 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(1000*peak_flux)/1000 ! peak= 4.206 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8576 x 2.231 at -3.387 degrees (North through East) ! Clean map min=-0.0062424 max=4.2063 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1924-2914_X_2017_04_28_pus_uvs.log closed on Mon Apr 29 14:32:37 2019