! Started logfile: J1924-1549_S_2017_10_21_pus_uvs.log on Sat May 11 21:04:57 2019 obs J1924-1549_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1924-1549_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.764269 visibilities/baseline/integration-bin. ! Found source: J1924-1549 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 16068 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1924-1549_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 598 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.882804Jy sigma=0.007586 ! Fit after self-cal, rms=0.860775Jy sigma=0.007399 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=20.56 mas, bpa=-16.13 degrees ! Estimated noise=1238.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101442 Jy ! Component: 100 - total flux cleaned = 0.1308 Jy ! Total flux subtracted in 100 components = 0.1308 Jy ! Clean residual min=-0.011148 max=0.018728 Jy/beam ! Clean residual mean=-0.000028 rms=0.003896 Jy/beam ! Combined flux in latest and established models = 0.1308 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.1308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115263Jy sigma=0.000920 ! Fit after self-cal, rms=0.115216Jy sigma=0.000920 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=21.33 mas, bpa=-15.85 degrees ! Estimated noise=724.088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028605 Jy ! Component: 100 - total flux cleaned = 0.0467987 Jy ! Component: 150 - total flux cleaned = 0.0601637 Jy ! Component: 200 - total flux cleaned = 0.0706528 Jy ! Total flux subtracted in 200 components = 0.0706528 Jy ! Clean residual min=-0.011507 max=0.018479 Jy/beam ! Clean residual mean=-0.000067 rms=0.005193 Jy/beam ! Combined flux in latest and established models = 0.201453 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 84 components and 0.201453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106721Jy sigma=0.000836 ! Fit after self-cal, rms=0.106638Jy sigma=0.000834 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.06 KP 1.00 ! LA 0.89 MK 1.07 NL 1.07 OV 1.08 ! PT 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.06 KP 0.97 ! LA 0.90 MK 1.04 NL 1.16 OV 1.08 ! PT 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.03 KP 1.00 ! LA 0.69 MK 1.06 NL 1.43 OV 1.01 ! PT 0.78 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.28 HN 1.00 KP 1.00* ! LA 0.74 MK 1.13 NL 1.00* OV 1.00* ! PT 0.78 ! ! ! Fit before self-cal, rms=0.106638Jy sigma=0.000834 ! Fit after self-cal, rms=0.101874Jy sigma=0.000791 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=21.97 mas, bpa=-15.85 degrees ! Estimated noise=717.267 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00648854 Jy ! Component: 100 - total flux cleaned = -0.00787626 Jy ! Component: 150 - total flux cleaned = -0.0091009 Jy ! Component: 200 - total flux cleaned = -0.00985219 Jy ! Total flux subtracted in 200 components = -0.00985219 Jy ! Clean residual min=-0.009186 max=0.015523 Jy/beam ! Clean residual mean=-0.000027 rms=0.003479 Jy/beam ! Combined flux in latest and established models = 0.191601 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 101 components and 0.191601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101238Jy sigma=0.000787 ! Fit after self-cal, rms=0.101765Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101765Jy sigma=0.000786 ! Fit after self-cal, rms=0.105432Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=21.95 mas, bpa=-15.95 degrees ! Estimated noise=718.589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00332774 Jy ! Component: 100 - total flux cleaned = -0.00407685 Jy ! Component: 150 - total flux cleaned = -0.0043617 Jy ! Component: 200 - total flux cleaned = -0.00461764 Jy ! Total flux subtracted in 200 components = -0.00461764 Jy ! Clean residual min=-0.007497 max=0.012178 Jy/beam ! Clean residual mean=-0.000010 rms=0.002876 Jy/beam ! Combined flux in latest and established models = 0.186983 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 123 components and 0.186983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105128Jy sigma=0.000768 ! Fit after self-cal, rms=0.105281Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128972 Jy ! Component: 100 - total flux cleaned = 0.0201689 Jy ! Component: 150 - total flux cleaned = 0.024776 Jy ! Component: 200 - total flux cleaned = 0.0273939 Jy ! Total flux subtracted in 200 components = 0.0273939 Jy ! Clean residual min=-0.006523 max=0.008829 Jy/beam ! Clean residual mean=0.000001 rms=0.002114 Jy/beam ! Combined flux in latest and established models = 0.214377 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 163 components and 0.214377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103500Jy sigma=0.000749 ! Fit after self-cal, rms=0.103105Jy sigma=0.000747 ! Inverting map ! Added new window around map position (-11, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00732818 Jy ! Component: 100 - total flux cleaned = 0.0087188 Jy ! Component: 150 - total flux cleaned = 0.00872932 Jy ! Component: 200 - total flux cleaned = 0.00844595 Jy ! Total flux subtracted in 200 components = 0.00844595 Jy ! Clean residual min=-0.005213 max=0.007351 Jy/beam ! Clean residual mean=0.000009 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.222823 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 217 components and 0.222823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101787Jy sigma=0.000740 ! Fit after self-cal, rms=0.101608Jy sigma=0.000738 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101608Jy sigma=0.000738 ! Fit after self-cal, rms=0.097988Jy sigma=0.000736 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=21.93 mas, bpa=-15.86 degrees ! Estimated noise=709.902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562338 Jy ! Component: 100 - total flux cleaned = 0.00888711 Jy ! Component: 150 - total flux cleaned = 0.0100539 Jy ! Component: 200 - total flux cleaned = 0.00994427 Jy ! Total flux subtracted in 200 components = 0.00994427 Jy ! Clean residual min=-0.004276 max=0.006274 Jy/beam ! Clean residual mean=0.000003 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.232767 Jy selfcal ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 280 components and 0.232767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097404Jy sigma=0.000733 ! Fit after self-cal, rms=0.097241Jy sigma=0.000732 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324833 Jy ! Component: 100 - total flux cleaned = 0.00348557 Jy ! Component: 150 - total flux cleaned = 0.00327769 Jy ! Component: 200 - total flux cleaned = 0.0029899 Jy ! Total flux subtracted in 200 components = 0.0029899 Jy ! Clean residual min=-0.003969 max=0.005649 Jy/beam ! Clean residual mean=0.000006 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.235757 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 320 components and 0.235757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096896Jy sigma=0.000730 ! Fit after self-cal, rms=0.096869Jy sigma=0.000730 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096869Jy sigma=0.000730 ! Fit after self-cal, rms=0.096316Jy sigma=0.000729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.269 mas, bmaj=28.5 mas, bpa=-7.377 degrees ! Estimated noise=829.307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489804 Jy ! Component: 100 - total flux cleaned = 0.00611453 Jy ! Component: 150 - total flux cleaned = 0.00623887 Jy ! Component: 200 - total flux cleaned = 0.00624244 Jy ! Total flux subtracted in 200 components = 0.00624244 Jy ! Clean residual min=-0.005008 max=0.007785 Jy/beam ! Clean residual mean=0.000004 rms=0.001974 Jy/beam ! Combined flux in latest and established models = 0.241999 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 357 components and 0.241999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096009Jy sigma=0.000727 ! Fit after self-cal, rms=0.095934Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222603 Jy ! Component: 100 - total flux cleaned = 0.0022374 Jy ! Component: 150 - total flux cleaned = 0.00196956 Jy ! Component: 200 - total flux cleaned = 0.00155905 Jy ! Total flux subtracted in 200 components = 0.00155905 Jy ! Clean residual min=-0.004810 max=0.007215 Jy/beam ! Clean residual mean=0.000008 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.243558 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 398 components and 0.243558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095758Jy sigma=0.000726 ! Fit after self-cal, rms=0.095767Jy sigma=0.000726 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=21.97 mas, bpa=-15.82 degrees ! Estimated noise=712.202 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.351 x 21.97 at -15.82 degrees (North through East) ! Clean map min=-0.0069858 max=0.13402 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=20.76 mas, bpa=-16.14 degrees ! Estimated noise=1272.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103214 Jy ! Component: 100 - total flux cleaned = 0.133869 Jy ! Component: 150 - total flux cleaned = 0.152056 Jy ! Component: 200 - total flux cleaned = 0.165861 Jy ! Total flux subtracted in 200 components = 0.165861 Jy ! Clean residual min=-0.008847 max=0.010675 Jy/beam ! Clean residual mean=-0.000018 rms=0.002579 Jy/beam ! Combined flux in latest and established models = 0.165861 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.165861 Jy ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=21.97 mas, bpa=-15.82 degrees ! Estimated noise=712.202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179049 Jy ! Component: 100 - total flux cleaned = 0.0305968 Jy ! Component: 150 - total flux cleaned = 0.0403024 Jy ! Component: 200 - total flux cleaned = 0.0479954 Jy ! Total flux subtracted in 200 components = 0.0479954 Jy ! Clean residual min=-0.005845 max=0.007662 Jy/beam ! Clean residual mean=-0.000017 rms=0.002038 Jy/beam ! Combined flux in latest and established models = 0.213856 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 120 components and 0.213856 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.269 mas, bmaj=28.5 mas, bpa=-7.377 degrees ! Estimated noise=829.307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935232 Jy ! Component: 100 - total flux cleaned = 0.0151807 Jy ! Component: 150 - total flux cleaned = 0.0188087 Jy ! Component: 200 - total flux cleaned = 0.021081 Jy ! Total flux subtracted in 200 components = 0.021081 Jy ! Clean residual min=-0.006199 max=0.007258 Jy/beam ! Clean residual mean=-0.000002 rms=0.002083 Jy/beam ! Combined flux in latest and established models = 0.234937 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160736 Jy ! Component: 100 - total flux cleaned = 0.00276583 Jy ! Component: 150 - total flux cleaned = 0.00350223 Jy ! Component: 200 - total flux cleaned = 0.00418019 Jy ! Total flux subtracted in 200 components = 0.00418019 Jy ! Clean residual min=-0.005604 max=0.007261 Jy/beam ! Clean residual mean=0.000003 rms=0.001913 Jy/beam ! Combined flux in latest and established models = 0.239117 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 221 components and 0.239118 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=21.97 mas, bpa=-15.82 degrees ! Estimated noise=712.202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00215321 Jy ! Component: 100 - total flux cleaned = -0.00248959 Jy ! Component: 150 - total flux cleaned = -0.00248865 Jy ! Component: 200 - total flux cleaned = -0.00230258 Jy ! Total flux subtracted in 200 components = -0.00230258 Jy ! Clean residual min=-0.004111 max=0.004783 Jy/beam ! Clean residual mean=0.000001 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.236815 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 253 components and 0.236815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095799Jy sigma=0.000726 ! Fit after self-cal, rms=0.095762Jy sigma=0.000725 wmodel J1924-1549_S_2017_10_21_pus_map.mod ! Writing 253 model components to file: J1924-1549_S_2017_10_21_pus_map.mod wobs J1924-1549_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1924-1549_S_2017_10_21_pus_uvs.fits wwins J1924-1549_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J1924-1549_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160077 Jy ! Component: 100 - total flux cleaned = 0.00283684 Jy ! Component: 150 - total flux cleaned = 0.00371213 Jy ! Component: 200 - total flux cleaned = 0.00415476 Jy ! Component: 250 - total flux cleaned = 0.00456895 Jy ! Component: 300 - total flux cleaned = 0.00484999 Jy ! Component: 350 - total flux cleaned = 0.00512002 Jy ! Component: 400 - total flux cleaned = 0.00527769 Jy ! Component: 450 - total flux cleaned = 0.00543058 Jy ! Component: 500 - total flux cleaned = 0.00572006 Jy ! Component: 550 - total flux cleaned = 0.00576684 Jy ! Component: 600 - total flux cleaned = 0.00599003 Jy ! Component: 650 - total flux cleaned = 0.00598946 Jy ! Component: 700 - total flux cleaned = 0.00611462 Jy ! Component: 750 - total flux cleaned = 0.00619607 Jy ! Component: 800 - total flux cleaned = 0.00631431 Jy ! Component: 850 - total flux cleaned = 0.00635204 Jy ! Component: 900 - total flux cleaned = 0.00635161 Jy ! Component: 950 - total flux cleaned = 0.00631416 Jy ! Component: 1000 - total flux cleaned = 0.0061722 Jy ! Component: 1050 - total flux cleaned = 0.00610356 Jy ! Component: 1100 - total flux cleaned = 0.00610421 Jy ! Component: 1150 - total flux cleaned = 0.00613734 Jy ! Component: 1200 - total flux cleaned = 0.00616953 Jy ! Component: 1250 - total flux cleaned = 0.00623302 Jy ! Component: 1300 - total flux cleaned = 0.00620255 Jy ! Component: 1350 - total flux cleaned = 0.00626407 Jy ! Component: 1400 - total flux cleaned = 0.00638428 Jy ! Component: 1450 - total flux cleaned = 0.00638355 Jy ! Component: 1500 - total flux cleaned = 0.00635462 Jy ! Component: 1550 - total flux cleaned = 0.00638375 Jy ! Component: 1600 - total flux cleaned = 0.00641227 Jy ! Component: 1650 - total flux cleaned = 0.00641228 Jy ! Component: 1700 - total flux cleaned = 0.00641219 Jy ! Component: 1750 - total flux cleaned = 0.00641185 Jy ! Component: 1800 - total flux cleaned = 0.00635848 Jy ! Component: 1850 - total flux cleaned = 0.00635832 Jy ! Component: 1900 - total flux cleaned = 0.00638428 Jy ! Component: 1950 - total flux cleaned = 0.0063584 Jy ! Component: 2000 - total flux cleaned = 0.00633314 Jy ! Component: 2050 - total flux cleaned = 0.00635831 Jy ! Component: 2100 - total flux cleaned = 0.00635877 Jy ! Component: 2150 - total flux cleaned = 0.00633467 Jy ! Component: 2200 - total flux cleaned = 0.00633489 Jy ! Component: 2250 - total flux cleaned = 0.00628712 Jy ! Component: 2300 - total flux cleaned = 0.0062869 Jy ! Component: 2350 - total flux cleaned = 0.0061699 Jy ! Component: 2400 - total flux cleaned = 0.00621629 Jy ! Component: 2450 - total flux cleaned = 0.0061932 Jy ! Component: 2500 - total flux cleaned = 0.00617053 Jy ! Component: 2550 - total flux cleaned = 0.0061705 Jy ! Component: 2600 - total flux cleaned = 0.0061703 Jy ! Component: 2650 - total flux cleaned = 0.00614818 Jy ! Component: 2700 - total flux cleaned = 0.00617028 Jy ! Component: 2750 - total flux cleaned = 0.00619201 Jy ! Component: 2800 - total flux cleaned = 0.00617048 Jy ! Component: 2850 - total flux cleaned = 0.00619192 Jy ! Component: 2900 - total flux cleaned = 0.00625518 Jy ! Component: 2950 - total flux cleaned = 0.00625511 Jy ! Component: 3000 - total flux cleaned = 0.00625533 Jy ! Component: 3050 - total flux cleaned = 0.00633792 Jy ! Component: 3100 - total flux cleaned = 0.00635839 Jy ! Component: 3150 - total flux cleaned = 0.00637861 Jy ! Component: 3200 - total flux cleaned = 0.00643909 Jy ! Component: 3250 - total flux cleaned = 0.00641905 Jy ! Component: 3300 - total flux cleaned = 0.00649866 Jy ! Component: 3350 - total flux cleaned = 0.00651844 Jy ! Component: 3400 - total flux cleaned = 0.00655753 Jy ! Component: 3450 - total flux cleaned = 0.00651852 Jy ! Component: 3500 - total flux cleaned = 0.00651855 Jy ! Component: 3550 - total flux cleaned = 0.00651865 Jy ! Component: 3600 - total flux cleaned = 0.00655703 Jy ! Component: 3650 - total flux cleaned = 0.00661434 Jy ! Component: 3700 - total flux cleaned = 0.00672792 Jy ! Component: 3750 - total flux cleaned = 0.00676559 Jy ! Component: 3800 - total flux cleaned = 0.00676555 Jy ! Component: 3850 - total flux cleaned = 0.00684013 Jy ! Component: 3900 - total flux cleaned = 0.00685868 Jy ! Component: 3950 - total flux cleaned = 0.00693267 Jy ! Component: 4000 - total flux cleaned = 0.00698796 Jy ! Component: 4050 - total flux cleaned = 0.00704299 Jy ! Total flux subtracted in 4096 components = 0.0070978 Jy ! Clean residual min=-0.001097 max=0.001051 Jy/beam ! Clean residual mean=0.000007 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.243913 Jy keep ! Adding 405 model components to the UV plane model. ! The established model now contains 656 components and 0.243913 Jy ![Exited script file: muppet] wmap "J1924-1549_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.351 x 21.97 at -15.82 degrees (North through East) ! Clean map min=-0.0036018 max=0.13517 Jy/beam ! Writing clean map to FITS file: J1924-1549_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13517 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000353239 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.783986 0.783986 1.56797 3.13594 6.27189 12.5438 25.0876 50.1751 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.135 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.351 x 21.97 at -15.82 degrees (North through East) ! Clean map min=-0.0036018 max=0.13517 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1924-1549_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:05:03 2019