! Started logfile: J1924-1549_S_2017_05_27_pus_uvs.log on Fri May 3 11:13:37 2019 obs J1924-1549_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1924-1549_S_2017_05_27_pus_uva.fits ! AN table 1: 155 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.986237 visibilities/baseline/integration-bin. ! Found source: J1924-1549 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 27516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1924-1549_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 789 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.879564Jy sigma=0.037305 ! Fit after self-cal, rms=0.872910Jy sigma=0.037148 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=6.759 mas, bpa=-5.47 degrees ! Estimated noise=592.872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.056804 Jy ! Component: 100 - total flux cleaned = 0.066368 Jy ! Total flux subtracted in 100 components = 0.066368 Jy ! Clean residual min=-0.020874 max=0.029501 Jy/beam ! Clean residual mean=0.000013 rms=0.005389 Jy/beam ! Combined flux in latest and established models = 0.066368 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.066368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144389Jy sigma=0.002502 ! Fit after self-cal, rms=0.144376Jy sigma=0.002499 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=7.914 mas, bpa=-3.656 degrees ! Estimated noise=398.751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (55.5, -94). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268542 Jy ! Component: 100 - total flux cleaned = 0.0414834 Jy ! Component: 150 - total flux cleaned = 0.0513789 Jy ! Component: 200 - total flux cleaned = 0.0558018 Jy ! Total flux subtracted in 200 components = 0.0558018 Jy ! Clean residual min=-0.014886 max=0.022721 Jy/beam ! Clean residual mean=-0.000088 rms=0.004523 Jy/beam ! Combined flux in latest and established models = 0.12217 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 38 components and 0.12217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134545Jy sigma=0.002746 ! Fit after self-cal, rms=0.132676Jy sigma=0.002740 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.73 HN 0.99 KP 0.78 ! LA 0.70 MK 0.95 NL 0.94 OV 0.81 ! PT 0.66 SC 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 8.78 FD 0.78 HN 0.97 KP 0.74 ! LA 0.68 MK 0.97 NL 1.31 OV 0.90 ! PT 0.67 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 21.46 FD 0.85 HN 0.94 KP 0.78 ! LA 0.69 MK 1.05 NL 1.03 OV 0.88 ! PT 0.66 SC 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.75 HN 0.79 KP 1.00* ! LA 28.98 MK 1.12 NL 1.00* OV 1.00* ! PT 0.73 SC 1.00* ! ! ! Fit before self-cal, rms=0.132676Jy sigma=0.002740 ! Fit after self-cal, rms=1.601584Jy sigma=0.000809 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=8.512 mas, bpa=-2.407 degrees ! Estimated noise=493.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379804 Jy ! Component: 100 - total flux cleaned = 0.00499535 Jy ! Component: 150 - total flux cleaned = 0.0064924 Jy ! Component: 200 - total flux cleaned = 0.00800445 Jy ! Total flux subtracted in 200 components = 0.00800445 Jy ! Clean residual min=-0.007865 max=0.010655 Jy/beam ! Clean residual mean=-0.000060 rms=0.002610 Jy/beam ! Combined flux in latest and established models = 0.130174 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 65 components and 0.130174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.599624Jy sigma=0.000803 ! Fit after self-cal, rms=1.600060Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.600060Jy sigma=0.000779 ! Fit after self-cal, rms=2.402775Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=8.515 mas, bpa=-2.899 degrees ! Estimated noise=507.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590112 Jy ! Component: 100 - total flux cleaned = 0.00808824 Jy ! Component: 150 - total flux cleaned = 0.00936333 Jy ! Component: 200 - total flux cleaned = 0.00999984 Jy ! Total flux subtracted in 200 components = 0.00999984 Jy ! Clean residual min=-0.007565 max=0.010248 Jy/beam ! Clean residual mean=-0.000043 rms=0.002352 Jy/beam ! Combined flux in latest and established models = 0.140174 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 82 components and 0.140174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.401402Jy sigma=0.000760 ! Fit after self-cal, rms=2.401448Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-55.5, 36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00823597 Jy ! Component: 100 - total flux cleaned = 0.00979651 Jy ! Component: 150 - total flux cleaned = 0.0109522 Jy ! Component: 200 - total flux cleaned = 0.0118347 Jy ! Total flux subtracted in 200 components = 0.0118347 Jy ! Clean residual min=-0.007204 max=0.009505 Jy/beam ! Clean residual mean=-0.000044 rms=0.002119 Jy/beam ! Combined flux in latest and established models = 0.152009 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 105 components and 0.152009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.400553Jy sigma=0.000753 ! Fit after self-cal, rms=2.400535Jy sigma=0.000752 ! Inverting map ! Added new window around map position (5.5, -36). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00924215 Jy ! Component: 100 - total flux cleaned = 0.0127368 Jy ! Component: 150 - total flux cleaned = 0.014057 Jy ! Component: 200 - total flux cleaned = 0.0144896 Jy ! Total flux subtracted in 200 components = 0.0144896 Jy ! Clean residual min=-0.005894 max=0.007708 Jy/beam ! Clean residual mean=-0.000035 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.166498 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 0.166498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.399849Jy sigma=0.000744 ! Fit after self-cal, rms=2.399813Jy sigma=0.000743 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.399813Jy sigma=0.000743 ! Fit after self-cal, rms=2.428865Jy sigma=0.000721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=8.544 mas, bpa=-3.314 degrees ! Estimated noise=530.853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408046 Jy ! Component: 100 - total flux cleaned = 0.00492475 Jy ! Component: 150 - total flux cleaned = 0.00536342 Jy ! Component: 200 - total flux cleaned = 0.00550016 Jy ! Total flux subtracted in 200 components = 0.00550016 Jy ! Clean residual min=-0.005886 max=0.007454 Jy/beam ! Clean residual mean=-0.000021 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 0.171999 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 0.171999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.427967Jy sigma=0.000722 ! Fit after self-cal, rms=2.427975Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578048 Jy ! Component: 100 - total flux cleaned = 0.00701865 Jy ! Component: 150 - total flux cleaned = 0.00799581 Jy ! Component: 200 - total flux cleaned = 0.00877812 Jy ! Total flux subtracted in 200 components = 0.00877812 Jy ! Clean residual min=-0.005209 max=0.006903 Jy/beam ! Clean residual mean=-0.000011 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.180777 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 166 components and 0.180777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.427334Jy sigma=0.000719 ! Fit after self-cal, rms=2.427375Jy sigma=0.000718 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.427375Jy sigma=0.000718 ! Fit after self-cal, rms=2.589370Jy sigma=0.000716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.06 mas, bmaj=18.01 mas, bpa=-1.049 degrees ! Estimated noise=643.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648188 Jy ! Component: 100 - total flux cleaned = 0.0100042 Jy ! Component: 150 - total flux cleaned = 0.0111924 Jy ! Component: 200 - total flux cleaned = 0.012292 Jy ! Total flux subtracted in 200 components = 0.012292 Jy ! Clean residual min=-0.007245 max=0.010242 Jy/beam ! Clean residual mean=-0.000005 rms=0.002519 Jy/beam ! Combined flux in latest and established models = 0.193069 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 192 components and 0.193069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.588413Jy sigma=0.000718 ! Fit after self-cal, rms=2.588524Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000996097 Jy ! Component: 100 - total flux cleaned = 0.00164814 Jy ! Component: 150 - total flux cleaned = 0.00226424 Jy ! Component: 200 - total flux cleaned = 0.00240688 Jy ! Total flux subtracted in 200 components = 0.00240688 Jy ! Clean residual min=-0.006919 max=0.009807 Jy/beam ! Clean residual mean=0.000000 rms=0.002422 Jy/beam ! Combined flux in latest and established models = 0.195476 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 202 components and 0.195476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.588160Jy sigma=0.000719 ! Fit after self-cal, rms=2.588238Jy sigma=0.000719 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=8.57 mas, bpa=-3.526 degrees ! Estimated noise=553.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.3 x 8.57 at -3.526 degrees (North through East) ! Clean map min=-0.0090824 max=0.11264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=7.136 mas, bpa=-3.079 degrees ! Estimated noise=918.247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882794 Jy ! Component: 100 - total flux cleaned = 0.110706 Jy ! Component: 150 - total flux cleaned = 0.123686 Jy ! Component: 200 - total flux cleaned = 0.134415 Jy ! Total flux subtracted in 200 components = 0.134415 Jy ! Clean residual min=-0.009001 max=0.010618 Jy/beam ! Clean residual mean=-0.000041 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 0.134415 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.134415 Jy ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=8.57 mas, bpa=-3.526 degrees ! Estimated noise=553.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.5, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139199 Jy ! Component: 100 - total flux cleaned = 0.0234817 Jy ! Component: 150 - total flux cleaned = 0.0304338 Jy ! Component: 200 - total flux cleaned = 0.0334664 Jy ! Total flux subtracted in 200 components = 0.0334664 Jy ! Clean residual min=-0.007273 max=0.007416 Jy/beam ! Clean residual mean=-0.000030 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.167881 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 78 components and 0.167881 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.06 mas, bmaj=18.01 mas, bpa=-1.049 degrees ! Estimated noise=643.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767757 Jy ! Component: 100 - total flux cleaned = 0.0117688 Jy ! Component: 150 - total flux cleaned = 0.0135428 Jy ! Component: 200 - total flux cleaned = 0.0156139 Jy ! Total flux subtracted in 200 components = 0.0156139 Jy ! Clean residual min=-0.008777 max=0.009126 Jy/beam ! Clean residual mean=-0.000017 rms=0.002669 Jy/beam ! Combined flux in latest and established models = 0.183495 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149415 Jy ! Component: 100 - total flux cleaned = 0.00324524 Jy ! Component: 150 - total flux cleaned = 0.004671 Jy ! Component: 200 - total flux cleaned = 0.00600029 Jy ! Total flux subtracted in 200 components = 0.00600029 Jy ! Clean residual min=-0.008206 max=0.008754 Jy/beam ! Clean residual mean=-0.000006 rms=0.002500 Jy/beam ! Combined flux in latest and established models = 0.189495 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 129 components and 0.189495 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=8.57 mas, bpa=-3.526 degrees ! Estimated noise=553.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310402 Jy ! Component: 100 - total flux cleaned = 0.00367633 Jy ! Component: 150 - total flux cleaned = 0.00420152 Jy ! Component: 200 - total flux cleaned = 0.00457176 Jy ! Total flux subtracted in 200 components = 0.00457176 Jy ! Clean residual min=-0.005452 max=0.006804 Jy/beam ! Clean residual mean=-0.000002 rms=0.001569 Jy/beam ! Combined flux in latest and established models = 0.194067 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 155 components and 0.194067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.587549Jy sigma=0.000719 ! Fit after self-cal, rms=2.587511Jy sigma=0.000718 wmodel J1924-1549_S_2017_05_27_pus_map.mod ! Writing 155 model components to file: J1924-1549_S_2017_05_27_pus_map.mod wobs J1924-1549_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1924-1549_S_2017_05_27_pus_uvs.fits wwins J1924-1549_S_2017_05_27_pus_map.win ! wwins: Wrote 6 windows to J1924-1549_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296789 Jy ! Component: 100 - total flux cleaned = 0.00497771 Jy ! Component: 150 - total flux cleaned = 0.00590448 Jy ! Component: 200 - total flux cleaned = 0.00660762 Jy ! Component: 250 - total flux cleaned = 0.00711091 Jy ! Component: 300 - total flux cleaned = 0.00751338 Jy ! Component: 350 - total flux cleaned = 0.00774947 Jy ! Component: 400 - total flux cleaned = 0.00774922 Jy ! Component: 450 - total flux cleaned = 0.00774801 Jy ! Component: 500 - total flux cleaned = 0.00789337 Jy ! Component: 550 - total flux cleaned = 0.0080366 Jy ! Component: 600 - total flux cleaned = 0.00824743 Jy ! Component: 650 - total flux cleaned = 0.00852156 Jy ! Component: 700 - total flux cleaned = 0.00852206 Jy ! Component: 750 - total flux cleaned = 0.00878699 Jy ! Component: 800 - total flux cleaned = 0.0091107 Jy ! Component: 850 - total flux cleaned = 0.00936566 Jy ! Component: 900 - total flux cleaned = 0.00974242 Jy ! Component: 950 - total flux cleaned = 0.00992727 Jy ! Component: 1000 - total flux cleaned = 0.0102944 Jy ! Component: 1050 - total flux cleaned = 0.010595 Jy ! Component: 1100 - total flux cleaned = 0.011011 Jy ! Component: 1150 - total flux cleaned = 0.0112451 Jy ! Component: 1200 - total flux cleaned = 0.011651 Jy ! Component: 1250 - total flux cleaned = 0.0120514 Jy ! Component: 1300 - total flux cleaned = 0.0122771 Jy ! Component: 1350 - total flux cleaned = 0.0126126 Jy ! Component: 1400 - total flux cleaned = 0.0127786 Jy ! Component: 1450 - total flux cleaned = 0.013107 Jy ! Component: 1500 - total flux cleaned = 0.01327 Jy ! Component: 1550 - total flux cleaned = 0.0135384 Jy ! Component: 1600 - total flux cleaned = 0.0139097 Jy ! Component: 1650 - total flux cleaned = 0.0138574 Jy ! Component: 1700 - total flux cleaned = 0.0139618 Jy ! Component: 1750 - total flux cleaned = 0.0141163 Jy ! Component: 1800 - total flux cleaned = 0.0142694 Jy ! Component: 1850 - total flux cleaned = 0.01432 Jy ! Component: 1900 - total flux cleaned = 0.0144699 Jy ! Component: 1950 - total flux cleaned = 0.0144202 Jy ! Component: 2000 - total flux cleaned = 0.0144204 Jy ! Component: 2050 - total flux cleaned = 0.0145174 Jy ! Component: 2100 - total flux cleaned = 0.0145655 Jy ! Component: 2150 - total flux cleaned = 0.0144215 Jy ! Component: 2200 - total flux cleaned = 0.0144217 Jy ! Component: 2250 - total flux cleaned = 0.014564 Jy ! Component: 2300 - total flux cleaned = 0.0144228 Jy ! Component: 2350 - total flux cleaned = 0.0145623 Jy ! Component: 2400 - total flux cleaned = 0.0145156 Jy ! Component: 2450 - total flux cleaned = 0.0144233 Jy ! Component: 2500 - total flux cleaned = 0.0144692 Jy ! Component: 2550 - total flux cleaned = 0.0144234 Jy ! Component: 2600 - total flux cleaned = 0.0143784 Jy ! Component: 2650 - total flux cleaned = 0.014245 Jy ! Component: 2700 - total flux cleaned = 0.0142011 Jy ! Component: 2750 - total flux cleaned = 0.0140696 Jy ! Component: 2800 - total flux cleaned = 0.0142445 Jy ! Component: 2850 - total flux cleaned = 0.0139406 Jy ! Component: 2900 - total flux cleaned = 0.0139836 Jy ! Component: 2950 - total flux cleaned = 0.0138549 Jy ! Component: 3000 - total flux cleaned = 0.0137696 Jy ! Component: 3050 - total flux cleaned = 0.013558 Jy ! Component: 3100 - total flux cleaned = 0.0134737 Jy ! Component: 3150 - total flux cleaned = 0.0133901 Jy ! Component: 3200 - total flux cleaned = 0.0131824 Jy ! Component: 3250 - total flux cleaned = 0.0130998 Jy ! Component: 3300 - total flux cleaned = 0.0130182 Jy ! Component: 3350 - total flux cleaned = 0.0128141 Jy ! Component: 3400 - total flux cleaned = 0.0126924 Jy ! Component: 3450 - total flux cleaned = 0.0126522 Jy ! Component: 3500 - total flux cleaned = 0.0124123 Jy ! Component: 3550 - total flux cleaned = 0.0124522 Jy ! Component: 3600 - total flux cleaned = 0.012215 Jy ! Component: 3650 - total flux cleaned = 0.012058 Jy ! Component: 3700 - total flux cleaned = 0.0120583 Jy ! Component: 3750 - total flux cleaned = 0.0119809 Jy ! Component: 3800 - total flux cleaned = 0.0117877 Jy ! Component: 3850 - total flux cleaned = 0.0116344 Jy ! Component: 3900 - total flux cleaned = 0.0115199 Jy ! Component: 3950 - total flux cleaned = 0.0115577 Jy ! Component: 4000 - total flux cleaned = 0.0114821 Jy ! Component: 4050 - total flux cleaned = 0.0112944 Jy ! Total flux subtracted in 4096 components = 0.0112568 Jy ! Clean residual min=-0.002030 max=0.002247 Jy/beam ! Clean residual mean=0.000002 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.205324 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 466 components and 0.205324 Jy ![Exited script file: muppet] wmap "J1924-1549_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.3 x 8.57 at -3.526 degrees (North through East) ! Clean map min=-0.0079083 max=0.11855 Jy/beam ! Writing clean map to FITS file: J1924-1549_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118555 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00072597 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.83705 1.83705 3.67409 7.34819 14.6964 29.3928 58.7855 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.3 x 8.57 at -3.526 degrees (North through East) ! Clean map min=-0.0079083 max=0.11855 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1924-1549_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:13:42 2019