! Started logfile: J1924+3329_S_2017_05_01_pus_uvs.log on Wed May 1 18:42:51 2019 obs J1924+3329_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1924+3329_S_2017_05_01_pus_uva.fits ! AN table 1: 242 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.915427 visibilities/baseline/integration-bin. ! Found source: J1924+3329 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 39876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1924+3329_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1054 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915460Jy sigma=0.033519 ! Fit after self-cal, rms=0.885944Jy sigma=0.033374 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=5.931 mas, bpa=-9.553 degrees ! Estimated noise=534.033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0901604 Jy ! Component: 100 - total flux cleaned = 0.143502 Jy ! Total flux subtracted in 100 components = 0.143502 Jy ! Clean residual min=-0.029874 max=0.036413 Jy/beam ! Clean residual mean=0.000148 rms=0.009931 Jy/beam ! Combined flux in latest and established models = 0.143502 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.143502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354558Jy sigma=0.004802 ! Fit after self-cal, rms=0.354088Jy sigma=0.004798 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.926 mas, bmaj=6.693 mas, bpa=-5.794 degrees ! Estimated noise=326.877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073496 Jy ! Component: 100 - total flux cleaned = 0.118364 Jy ! Component: 150 - total flux cleaned = 0.146594 Jy ! Component: 200 - total flux cleaned = 0.164462 Jy ! Total flux subtracted in 200 components = 0.164462 Jy ! Clean residual min=-0.044808 max=0.059346 Jy/beam ! Clean residual mean=0.000474 rms=0.017889 Jy/beam ! Combined flux in latest and established models = 0.307964 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 71 components and 0.307964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318674Jy sigma=0.007672 ! Fit after self-cal, rms=0.317576Jy sigma=0.007668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.43 FD 0.66 HN 1.01 KP 1.38 ! LA 0.53 MK 2.23 NL 2.87 OV 1.17 ! PT 0.51 SC 1.29 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.48 FD 0.66 HN 0.97 KP 1.29 ! LA 0.52 MK 2.13 NL 2.71 OV 1.29 ! PT 0.51 SC 1.21 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 0.70 HN 0.93 KP 1.28 ! LA 0.55 MK 2.16 NL 2.59 OV 1.16 ! PT 0.51 SC 1.20 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.20 FD 0.80 HN 0.86 KP 1.00* ! LA 36.51 MK 2.58 NL 1.00* OV 1.00* ! PT 0.47 SC 1.00* ! ! ! Fit before self-cal, rms=0.317576Jy sigma=0.007668 ! Fit after self-cal, rms=2.637400Jy sigma=0.002394 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.457 mas, bmaj=7.248 mas, bpa=-2.661 degrees ! Estimated noise=409.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161991 Jy ! Component: 100 - total flux cleaned = 0.020021 Jy ! Component: 150 - total flux cleaned = 0.0207373 Jy ! Component: 200 - total flux cleaned = 0.0214144 Jy ! Total flux subtracted in 200 components = 0.0214144 Jy ! Clean residual min=-0.037094 max=0.062601 Jy/beam ! Clean residual mean=0.000457 rms=0.014151 Jy/beam ! Combined flux in latest and established models = 0.329378 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 82 components and 0.329378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.635378Jy sigma=0.002405 ! Fit after self-cal, rms=2.639009Jy sigma=0.002285 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.639009Jy sigma=0.002285 ! Fit after self-cal, rms=4.913851Jy sigma=0.001938 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.663 mas, bmaj=7.055 mas, bpa=-16.48 degrees ! Estimated noise=412.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132085 Jy ! Component: 100 - total flux cleaned = 0.00113623 Jy ! Component: 150 - total flux cleaned = 0.00113994 Jy ! Component: 200 - total flux cleaned = 0.00102607 Jy ! Total flux subtracted in 200 components = 0.00102607 Jy ! Clean residual min=-0.030041 max=0.044731 Jy/beam ! Clean residual mean=-0.000005 rms=0.010041 Jy/beam ! Combined flux in latest and established models = 0.330404 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 0.330404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.913977Jy sigma=0.001939 ! Fit after self-cal, rms=4.912269Jy sigma=0.001926 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-37, -29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307814 Jy ! Component: 100 - total flux cleaned = 0.0330488 Jy ! Component: 150 - total flux cleaned = 0.0347476 Jy ! Component: 200 - total flux cleaned = 0.0333564 Jy ! Total flux subtracted in 200 components = 0.0333564 Jy ! Clean residual min=-0.032891 max=0.051040 Jy/beam ! Clean residual mean=-0.000020 rms=0.010550 Jy/beam ! Combined flux in latest and established models = 0.363761 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 124 components and 0.363761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.905735Jy sigma=0.001931 ! Fit after self-cal, rms=4.901978Jy sigma=0.001874 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.901978Jy sigma=0.001874 ! Fit after self-cal, rms=3.425925Jy sigma=0.001834 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.716 mas, bmaj=7.288 mas, bpa=-15.26 degrees ! Estimated noise=415.467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316264 Jy ! Component: 100 - total flux cleaned = 0.0326481 Jy ! Component: 150 - total flux cleaned = 0.0295459 Jy ! Component: 200 - total flux cleaned = 0.0261618 Jy ! Total flux subtracted in 200 components = 0.0261618 Jy ! Clean residual min=-0.032179 max=0.042678 Jy/beam ! Clean residual mean=0.000055 rms=0.010239 Jy/beam ! Combined flux in latest and established models = 0.389923 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 149 components and 0.389923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.423691Jy sigma=0.001827 ! Fit after self-cal, rms=3.422848Jy sigma=0.001787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204671 Jy ! Component: 100 - total flux cleaned = 0.0184211 Jy ! Component: 150 - total flux cleaned = 0.0159652 Jy ! Component: 200 - total flux cleaned = 0.0133033 Jy ! Total flux subtracted in 200 components = 0.0133033 Jy ! Clean residual min=-0.032488 max=0.042583 Jy/beam ! Clean residual mean=0.000041 rms=0.010252 Jy/beam ! Combined flux in latest and established models = 0.403226 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 177 components and 0.403226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.421631Jy sigma=0.001808 ! Fit after self-cal, rms=3.421340Jy sigma=0.001790 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.421340Jy sigma=0.001790 ! Fit after self-cal, rms=3.509620Jy sigma=0.001682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.43 mas, bmaj=11.56 mas, bpa=-27.11 degrees ! Estimated noise=401.233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286156 Jy ! Component: 100 - total flux cleaned = 0.0230439 Jy ! Component: 150 - total flux cleaned = 0.0184097 Jy ! Component: 200 - total flux cleaned = 0.0137782 Jy ! Total flux subtracted in 200 components = 0.0137782 Jy ! Clean residual min=-0.041075 max=0.051470 Jy/beam ! Clean residual mean=0.000128 rms=0.012559 Jy/beam ! Combined flux in latest and established models = 0.417004 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 196 components and 0.417004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.508860Jy sigma=0.001663 ! Fit after self-cal, rms=3.508686Jy sigma=0.001634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118701 Jy ! Component: 100 - total flux cleaned = 0.00916947 Jy ! Component: 150 - total flux cleaned = 0.00595879 Jy ! Component: 200 - total flux cleaned = 0.00317525 Jy ! Total flux subtracted in 200 components = 0.00317525 Jy ! Clean residual min=-0.042161 max=0.049268 Jy/beam ! Clean residual mean=0.000070 rms=0.012142 Jy/beam ! Combined flux in latest and established models = 0.420179 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 213 components and 0.420179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.508189Jy sigma=0.001639 ! Fit after self-cal, rms=3.508127Jy sigma=0.001628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.98 mas, bmaj=7.631 mas, bpa=-12.52 degrees ! Estimated noise=441.346 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.98 x 7.631 at -12.52 degrees (North through East) ! Clean map min=-0.062529 max=0.13227 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=6.416 mas, bpa=-14 degrees ! Estimated noise=933.832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132366 Jy ! Component: 100 - total flux cleaned = 0.220642 Jy ! Component: 150 - total flux cleaned = 0.280169 Jy ! Component: 200 - total flux cleaned = 0.30646 Jy ! Total flux subtracted in 200 components = 0.30646 Jy ! Clean residual min=-0.036150 max=0.052313 Jy/beam ! Clean residual mean=0.000091 rms=0.011073 Jy/beam ! Combined flux in latest and established models = 0.30646 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.30646 Jy ! Inverting map and beam ! Estimated beam: bmin=4.98 mas, bmaj=7.631 mas, bpa=-12.52 degrees ! Estimated noise=441.346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0664835 Jy ! Component: 100 - total flux cleaned = 0.0920634 Jy ! Component: 150 - total flux cleaned = 0.105278 Jy ! Component: 200 - total flux cleaned = 0.106604 Jy ! Total flux subtracted in 200 components = 0.106604 Jy ! Clean residual min=-0.035736 max=0.045849 Jy/beam ! Clean residual mean=0.000129 rms=0.010161 Jy/beam ! Combined flux in latest and established models = 0.413064 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 85 components and 0.413064 Jy ! Inverting map ! Added new window around map position (63.5, 126). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436486 Jy ! Component: 100 - total flux cleaned = 0.050475 Jy ! Component: 150 - total flux cleaned = 0.0514077 Jy ! Component: 200 - total flux cleaned = 0.0505513 Jy ! Total flux subtracted in 200 components = 0.0505513 Jy ! Clean residual min=-0.032453 max=0.036626 Jy/beam ! Clean residual mean=0.000007 rms=0.008863 Jy/beam ! Combined flux in latest and established models = 0.463616 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 119 components and 0.463616 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.43 mas, bmaj=11.56 mas, bpa=-27.11 degrees ! Estimated noise=401.233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571558 Jy ! Component: 100 - total flux cleaned = 0.00314048 Jy ! Component: 150 - total flux cleaned = 0.000753845 Jy ! Component: 200 - total flux cleaned = -0.00213152 Jy ! Total flux subtracted in 200 components = -0.00213152 Jy ! Clean residual min=-0.040091 max=0.046848 Jy/beam ! Clean residual mean=-0.000002 rms=0.010953 Jy/beam ! Combined flux in latest and established models = 0.461484 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (38, -71.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393012 Jy ! Component: 100 - total flux cleaned = 0.0569042 Jy ! Component: 150 - total flux cleaned = 0.0630351 Jy ! Component: 200 - total flux cleaned = 0.0651577 Jy ! Total flux subtracted in 200 components = 0.0651577 Jy ! Clean residual min=-0.037646 max=0.033221 Jy/beam ! Clean residual mean=-0.000021 rms=0.009847 Jy/beam ! Combined flux in latest and established models = 0.526642 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 168 components and 0.526642 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.98 mas, bmaj=7.631 mas, bpa=-12.52 degrees ! Estimated noise=441.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406991 Jy ! Component: 100 - total flux cleaned = 0.00548268 Jy ! Component: 150 - total flux cleaned = 0.00747143 Jy ! Component: 200 - total flux cleaned = 0.00869631 Jy ! Total flux subtracted in 200 components = 0.00869631 Jy ! Clean residual min=-0.029851 max=0.030306 Jy/beam ! Clean residual mean=-0.000013 rms=0.007769 Jy/beam ! Combined flux in latest and established models = 0.535338 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 209 components and 0.535338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.503905Jy sigma=0.001492 ! Fit after self-cal, rms=3.503985Jy sigma=0.001433 wmodel J1924+3329_S_2017_05_01_pus_map.mod ! Writing 209 model components to file: J1924+3329_S_2017_05_01_pus_map.mod wobs J1924+3329_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1924+3329_S_2017_05_01_pus_uvs.fits wwins J1924+3329_S_2017_05_01_pus_map.win ! wwins: Wrote 5 windows to J1924+3329_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669235 Jy ! Component: 100 - total flux cleaned = 0.0113351 Jy ! Component: 150 - total flux cleaned = 0.0157011 Jy ! Component: 200 - total flux cleaned = 0.0190569 Jy ! Component: 250 - total flux cleaned = 0.0222848 Jy ! Component: 300 - total flux cleaned = 0.0257819 Jy ! Component: 350 - total flux cleaned = 0.0287876 Jy ! Component: 400 - total flux cleaned = 0.0335275 Jy ! Component: 450 - total flux cleaned = 0.0367186 Jy ! Component: 500 - total flux cleaned = 0.0388019 Jy ! Component: 550 - total flux cleaned = 0.0411843 Jy ! Component: 600 - total flux cleaned = 0.0431863 Jy ! Component: 650 - total flux cleaned = 0.045476 Jy ! Component: 700 - total flux cleaned = 0.0483715 Jy ! Component: 750 - total flux cleaned = 0.0502734 Jy ! Component: 800 - total flux cleaned = 0.0518393 Jy ! Component: 850 - total flux cleaned = 0.053379 Jy ! Component: 900 - total flux cleaned = 0.054898 Jy ! Component: 950 - total flux cleaned = 0.0560948 Jy ! Component: 1000 - total flux cleaned = 0.0569789 Jy ! Component: 1050 - total flux cleaned = 0.0569776 Jy ! Component: 1100 - total flux cleaned = 0.05814 Jy ! Component: 1150 - total flux cleaned = 0.0587139 Jy ! Component: 1200 - total flux cleaned = 0.0598461 Jy ! Component: 1250 - total flux cleaned = 0.059567 Jy ! Component: 1300 - total flux cleaned = 0.059845 Jy ! Component: 1350 - total flux cleaned = 0.0606706 Jy ! Component: 1400 - total flux cleaned = 0.0609409 Jy ! Component: 1450 - total flux cleaned = 0.0612031 Jy ! Component: 1500 - total flux cleaned = 0.0612017 Jy ! Component: 1550 - total flux cleaned = 0.0606731 Jy ! Component: 1600 - total flux cleaned = 0.0611955 Jy ! Component: 1650 - total flux cleaned = 0.0609382 Jy ! Component: 1700 - total flux cleaned = 0.0619619 Jy ! Component: 1750 - total flux cleaned = 0.0629733 Jy ! Component: 1800 - total flux cleaned = 0.0644735 Jy ! Component: 1850 - total flux cleaned = 0.0637249 Jy ! Component: 1900 - total flux cleaned = 0.064467 Jy ! Component: 1950 - total flux cleaned = 0.0651994 Jy ! Component: 2000 - total flux cleaned = 0.0659234 Jy ! Component: 2050 - total flux cleaned = 0.0666418 Jy ! Component: 2100 - total flux cleaned = 0.0675927 Jy ! Component: 2150 - total flux cleaned = 0.0680663 Jy ! Component: 2200 - total flux cleaned = 0.0694673 Jy ! Component: 2250 - total flux cleaned = 0.0692346 Jy ! Component: 2300 - total flux cleaned = 0.0699291 Jy ! Component: 2350 - total flux cleaned = 0.0699299 Jy ! Component: 2400 - total flux cleaned = 0.0708404 Jy ! Component: 2450 - total flux cleaned = 0.0721866 Jy ! Component: 2500 - total flux cleaned = 0.0719608 Jy ! Component: 2550 - total flux cleaned = 0.072182 Jy ! Component: 2600 - total flux cleaned = 0.0730628 Jy ! Component: 2650 - total flux cleaned = 0.0741567 Jy ! Component: 2700 - total flux cleaned = 0.074806 Jy ! Component: 2750 - total flux cleaned = 0.0748037 Jy ! Component: 2800 - total flux cleaned = 0.0754464 Jy ! Component: 2850 - total flux cleaned = 0.0752323 Jy ! Component: 2900 - total flux cleaned = 0.0760772 Jy ! Component: 2950 - total flux cleaned = 0.0762873 Jy ! Component: 3000 - total flux cleaned = 0.0760779 Jy ! Component: 3050 - total flux cleaned = 0.0771169 Jy ! Component: 3100 - total flux cleaned = 0.0769111 Jy ! Component: 3150 - total flux cleaned = 0.0773217 Jy ! Component: 3200 - total flux cleaned = 0.0779338 Jy ! Component: 3250 - total flux cleaned = 0.0781344 Jy ! Component: 3300 - total flux cleaned = 0.0787398 Jy ! Component: 3350 - total flux cleaned = 0.07914 Jy ! Component: 3400 - total flux cleaned = 0.0795404 Jy ! Component: 3450 - total flux cleaned = 0.0801353 Jy ! Component: 3500 - total flux cleaned = 0.0795425 Jy ! Component: 3550 - total flux cleaned = 0.0799366 Jy ! Component: 3600 - total flux cleaned = 0.0812993 Jy ! Component: 3650 - total flux cleaned = 0.0818791 Jy ! Component: 3700 - total flux cleaned = 0.0816863 Jy ! Component: 3750 - total flux cleaned = 0.0822617 Jy ! Component: 3800 - total flux cleaned = 0.0828318 Jy ! Component: 3850 - total flux cleaned = 0.0828305 Jy ! Component: 3900 - total flux cleaned = 0.0828329 Jy ! Component: 3950 - total flux cleaned = 0.0835842 Jy ! Component: 4000 - total flux cleaned = 0.0845176 Jy ! Component: 4050 - total flux cleaned = 0.084889 Jy ! Total flux subtracted in 4096 components = 0.08489 Jy ! Clean residual min=-0.009615 max=0.010752 Jy/beam ! Clean residual mean=-0.000069 rms=0.003884 Jy/beam ! Combined flux in latest and established models = 0.620228 Jy keep ! Adding 408 model components to the UV plane model. ! The established model now contains 616 components and 0.620228 Jy ![Exited script file: muppet] wmap "J1924+3329_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.98 x 7.631 at -12.52 degrees (North through East) ! Clean map min=-0.054474 max=0.13119 Jy/beam ! Writing clean map to FITS file: J1924+3329_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.131186 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00386444 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -8.83734 8.83734 17.6747 35.3494 70.6987 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0115 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.131 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.98 x 7.631 at -12.52 degrees (North through East) ! Clean map min=-0.054474 max=0.13119 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1924+3329_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:42:57 2019