! Started logfile: J1923-2104_X_2017_08_12_pus_uvs.log on Fri May 10 15:27:55 2019 obs J1923-2104_X_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1923-2104_X_2017_08_12_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.732479 visibilities/baseline/integration-bin. ! Found source: J1923-2104 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1049 lines of history. ! ! Reading 10284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1923-2104_X_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.414304Jy sigma=0.003093 ! Fit after self-cal, rms=0.206443Jy sigma=0.001467 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.6131 mas, bmaj=1.602 mas, bpa=-3.11 degrees ! Estimated noise=1445.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.661766 Jy ! Component: 100 - total flux cleaned = 0.81342 Jy ! Total flux subtracted in 100 components = 0.81342 Jy ! Clean residual min=-0.031222 max=0.058514 Jy/beam ! Clean residual mean=-0.000463 rms=0.009415 Jy/beam ! Combined flux in latest and established models = 0.81342 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.81342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.182421Jy sigma=0.001443 ! Fit after self-cal, rms=0.182382Jy sigma=0.001443 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0686934 Jy ! Component: 100 - total flux cleaned = 0.110786 Jy ! Total flux subtracted in 100 components = 0.110786 Jy ! Clean residual min=-0.023273 max=0.036624 Jy/beam ! Clean residual mean=-0.000233 rms=0.006029 Jy/beam ! Combined flux in latest and established models = 0.924207 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.924207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142626Jy sigma=0.001045 ! Fit after self-cal, rms=0.142261Jy sigma=0.001044 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-1, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360798 Jy ! Component: 100 - total flux cleaned = 0.0606318 Jy ! Total flux subtracted in 100 components = 0.0606318 Jy ! Clean residual min=-0.019298 max=0.025107 Jy/beam ! Clean residual mean=-0.000147 rms=0.004674 Jy/beam ! Combined flux in latest and established models = 0.984838 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.984838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126565Jy sigma=0.000896 ! Fit after self-cal, rms=0.125507Jy sigma=0.000891 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7632 mas, bmaj=1.9 mas, bpa=-2.271 degrees ! Estimated noise=931.633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356011 Jy ! Component: 100 - total flux cleaned = 0.0575455 Jy ! Component: 150 - total flux cleaned = 0.0720451 Jy ! Component: 200 - total flux cleaned = 0.0820238 Jy ! Total flux subtracted in 200 components = 0.0820238 Jy ! Clean residual min=-0.014022 max=0.027081 Jy/beam ! Clean residual mean=-0.000181 rms=0.004667 Jy/beam ! Combined flux in latest and established models = 1.06686 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 65 components and 1.06686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115221Jy sigma=0.000786 ! Fit after self-cal, rms=0.114291Jy sigma=0.000778 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (0.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0278532 Jy ! Component: 100 - total flux cleaned = 0.042742 Jy ! Component: 150 - total flux cleaned = 0.0529288 Jy ! Component: 200 - total flux cleaned = 0.0602582 Jy ! Total flux subtracted in 200 components = 0.0602582 Jy ! Clean residual min=-0.012183 max=0.012169 Jy/beam ! Clean residual mean=-0.000035 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 1.12712 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 97 components and 1.12712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107379Jy sigma=0.000715 ! Fit after self-cal, rms=0.106512Jy sigma=0.000708 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.10 KP 1.02 ! LA 0.95 MK 0.98 NL 0.98 OV 0.98 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.07 KP 1.05 ! LA 0.96 MK 0.99 NL 1.00 OV 0.98 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.07 KP 0.97 ! LA 0.99 MK 0.99 NL 0.98 OV 0.98 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.09 KP 1.02 ! LA 0.99 MK 1.00 NL 0.99 OV 0.98 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.05 KP 1.01 ! LA 0.97 MK 1.01 NL 0.99 OV 0.98 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.06 KP 1.02 ! LA 0.98 MK 0.99 NL 1.00 OV 0.98 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.07 KP 1.02 ! LA 0.99 MK 1.00 NL 0.98 OV 0.99 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.06 KP 1.01 ! LA 0.97 MK 1.00 NL 0.99 OV 0.99 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.08 KP 1.02 ! LA 0.97 MK 0.96 NL 0.98 OV 0.98 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.06 KP 1.01 ! LA 0.99 MK 1.01 NL 0.98 OV 0.98 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.09 KP 1.01 ! LA 0.99 MK 0.99 NL 0.99 OV 0.99 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.07 KP 1.02 ! LA 0.97 MK 0.97 NL 0.99 OV 0.99 ! PT 1.04 SC 0.98 ! ! ! Fit before self-cal, rms=0.106512Jy sigma=0.000708 ! Fit after self-cal, rms=0.103597Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7631 mas, bmaj=1.896 mas, bpa=-2.304 degrees ! Estimated noise=932.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.4, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107424 Jy ! Component: 100 - total flux cleaned = 0.0170667 Jy ! Component: 150 - total flux cleaned = 0.0212975 Jy ! Component: 200 - total flux cleaned = 0.0226056 Jy ! Total flux subtracted in 200 components = 0.0226056 Jy ! Clean residual min=-0.004902 max=0.007083 Jy/beam ! Clean residual mean=0.000008 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 1.14973 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 118 components and 1.14973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102382Jy sigma=0.000663 ! Fit after self-cal, rms=0.102311Jy sigma=0.000662 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102311Jy sigma=0.000662 ! Fit after self-cal, rms=0.101705Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7627 mas, bmaj=1.895 mas, bpa=-2.284 degrees ! Estimated noise=933.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503552 Jy ! Component: 100 - total flux cleaned = 0.00764059 Jy ! Component: 150 - total flux cleaned = 0.00815748 Jy ! Component: 200 - total flux cleaned = 0.00815756 Jy ! Total flux subtracted in 200 components = 0.00815756 Jy ! Clean residual min=-0.003757 max=0.006243 Jy/beam ! Clean residual mean=-0.000001 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 1.15788 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 138 components and 1.15788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101354Jy sigma=0.000653 ! Fit after self-cal, rms=0.101307Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498421 Jy ! Component: 100 - total flux cleaned = 0.00534183 Jy ! Component: 150 - total flux cleaned = 0.00524606 Jy ! Component: 200 - total flux cleaned = 0.00515917 Jy ! Total flux subtracted in 200 components = 0.00515917 Jy ! Clean residual min=-0.003843 max=0.004693 Jy/beam ! Clean residual mean=0.000009 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 1.16304 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 152 components and 1.16304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100941Jy sigma=0.000650 ! Fit after self-cal, rms=0.100934Jy sigma=0.000650 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (3, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337604 Jy ! Component: 100 - total flux cleaned = 0.00397171 Jy ! Component: 150 - total flux cleaned = 0.00397503 Jy ! Component: 200 - total flux cleaned = 0.0040567 Jy ! Total flux subtracted in 200 components = 0.0040567 Jy ! Clean residual min=-0.003347 max=0.003638 Jy/beam ! Clean residual mean=0.000014 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 1.1671 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 171 components and 1.1671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100704Jy sigma=0.000648 ! Fit after self-cal, rms=0.100693Jy sigma=0.000648 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100693Jy sigma=0.000648 ! Fit after self-cal, rms=0.100577Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7625 mas, bmaj=1.895 mas, bpa=-2.281 degrees ! Estimated noise=933.638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270037 Jy ! Component: 100 - total flux cleaned = 0.00337519 Jy ! Component: 150 - total flux cleaned = 0.0034509 Jy ! Component: 200 - total flux cleaned = 0.00358521 Jy ! Total flux subtracted in 200 components = 0.00358521 Jy ! Clean residual min=-0.002696 max=0.003388 Jy/beam ! Clean residual mean=0.000002 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 1.17068 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 184 components and 1.17069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100444Jy sigma=0.000646 ! Fit after self-cal, rms=0.100440Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239394 Jy ! Component: 100 - total flux cleaned = 0.00297641 Jy ! Component: 150 - total flux cleaned = 0.00310078 Jy ! Component: 200 - total flux cleaned = 0.00315939 Jy ! Total flux subtracted in 200 components = 0.00315939 Jy ! Clean residual min=-0.002518 max=0.003360 Jy/beam ! Clean residual mean=0.000002 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 1.17384 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 195 components and 1.17384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100304Jy sigma=0.000645 ! Fit after self-cal, rms=0.100302Jy sigma=0.000645 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-18, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299726 Jy ! Component: 100 - total flux cleaned = 0.00365527 Jy ! Component: 150 - total flux cleaned = 0.00412491 Jy ! Component: 200 - total flux cleaned = 0.00434468 Jy ! Total flux subtracted in 200 components = 0.00434468 Jy ! Clean residual min=-0.002310 max=0.002964 Jy/beam ! Clean residual mean=-0.000000 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 1.17819 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 212 components and 1.17819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100171Jy sigma=0.000644 ! Fit after self-cal, rms=0.100169Jy sigma=0.000644 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-3.2, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206596 Jy ! Component: 100 - total flux cleaned = 0.00254998 Jy ! Component: 150 - total flux cleaned = 0.00292807 Jy ! Component: 200 - total flux cleaned = 0.00302874 Jy ! Total flux subtracted in 200 components = 0.00302874 Jy ! Clean residual min=-0.002233 max=0.002173 Jy/beam ! Clean residual mean=-0.000000 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.18122 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 233 components and 1.18122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100070Jy sigma=0.000643 ! Fit after self-cal, rms=0.100068Jy sigma=0.000643 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100068Jy sigma=0.000643 ! Fit after self-cal, rms=0.100053Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.111 mas, bmaj=4.719 mas, bpa=-0.7181 degrees ! Estimated noise=1253.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120256 Jy ! Component: 100 - total flux cleaned = 0.00176213 Jy ! Component: 150 - total flux cleaned = 0.00171122 Jy ! Component: 200 - total flux cleaned = 0.00175888 Jy ! Total flux subtracted in 200 components = 0.00175888 Jy ! Clean residual min=-0.002248 max=0.002157 Jy/beam ! Clean residual mean=-0.000013 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 1.18298 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 247 components and 1.18298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100017Jy sigma=0.000643 ! Fit after self-cal, rms=0.100013Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120359 Jy ! Component: 100 - total flux cleaned = 3.28855e-05 Jy ! Component: 150 - total flux cleaned = -4.7966e-05 Jy ! Component: 200 - total flux cleaned = -0.000124235 Jy ! Total flux subtracted in 200 components = -0.000124235 Jy ! Clean residual min=-0.002135 max=0.002029 Jy/beam ! Clean residual mean=-0.000014 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 1.18285 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 253 components and 1.18285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099995Jy sigma=0.000643 ! Fit after self-cal, rms=0.099991Jy sigma=0.000643 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7624 mas, bmaj=1.895 mas, bpa=-2.276 degrees ! Estimated noise=933.725 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7624 x 1.895 at -2.276 degrees (North through East) ! Clean map min=-0.0018964 max=0.85682 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099991Jy sigma=0.000643 ! Fit after self-cal, rms=0.094728Jy sigma=0.000596 ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7624 mas, bmaj=1.896 mas, bpa=-2.253 degrees ! Estimated noise=933.814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135252 Jy ! Component: 100 - total flux cleaned = 2.03103e-05 Jy ! Component: 150 - total flux cleaned = 0.000206535 Jy ! Component: 200 - total flux cleaned = 0.00025063 Jy ! Total flux subtracted in 200 components = 0.00025063 Jy ! Clean residual min=-0.001969 max=0.001918 Jy/beam ! Clean residual mean=-0.000004 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 1.1831 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 270 components and 1.1831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094673Jy sigma=0.000595 ! Fit after self-cal, rms=0.094674Jy sigma=0.000595 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212481 Jy ! Component: 100 - total flux cleaned = 0.000252192 Jy ! Component: 150 - total flux cleaned = 0.000250717 Jy ! Component: 200 - total flux cleaned = 0.000250436 Jy ! Total flux subtracted in 200 components = 0.000250436 Jy ! Clean residual min=-0.001988 max=0.001871 Jy/beam ! Clean residual mean=-0.000003 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 1.18335 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 276 components and 1.18335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094639Jy sigma=0.000595 ! Fit after self-cal, rms=0.094639Jy sigma=0.000595 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094639Jy sigma=0.000595 ! Fit after self-cal, rms=0.094644Jy sigma=0.000595 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.6127 mas, bmaj=1.597 mas, bpa=-3.008 degrees ! Estimated noise=1448.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.662846 Jy ! Component: 100 - total flux cleaned = 0.817085 Jy ! Component: 150 - total flux cleaned = 0.890266 Jy ! Component: 200 - total flux cleaned = 0.93864 Jy ! Total flux subtracted in 200 components = 0.93864 Jy ! Clean residual min=-0.016504 max=0.027344 Jy/beam ! Clean residual mean=-0.000269 rms=0.005092 Jy/beam ! Combined flux in latest and established models = 0.93864 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.93864 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7623 mas, bmaj=1.895 mas, bpa=-2.259 degrees ! Estimated noise=933.894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0570793 Jy ! Component: 100 - total flux cleaned = 0.0944238 Jy ! Component: 150 - total flux cleaned = 0.12151 Jy ! Component: 200 - total flux cleaned = 0.141907 Jy ! Total flux subtracted in 200 components = 0.141907 Jy ! Clean residual min=-0.007873 max=0.013873 Jy/beam ! Clean residual mean=-0.000236 rms=0.003358 Jy/beam ! Combined flux in latest and established models = 1.08055 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 100 components and 1.08055 Jy ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.11 mas, bmaj=4.718 mas, bpa=-0.7079 degrees ! Estimated noise=1254.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300533 Jy ! Component: 100 - total flux cleaned = 0.0481002 Jy ! Component: 150 - total flux cleaned = 0.0603024 Jy ! Component: 200 - total flux cleaned = 0.0690303 Jy ! Total flux subtracted in 200 components = 0.0690303 Jy ! Clean residual min=-0.005201 max=0.007016 Jy/beam ! Clean residual mean=-0.000143 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 1.14958 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645977 Jy ! Component: 100 - total flux cleaned = 0.0114608 Jy ! Component: 150 - total flux cleaned = 0.0154961 Jy ! Component: 200 - total flux cleaned = 0.0188969 Jy ! Total flux subtracted in 200 components = 0.0188969 Jy ! Clean residual min=-0.003333 max=0.003717 Jy/beam ! Clean residual mean=-0.000061 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 1.16847 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 174 components and 1.16847 Jy ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7623 mas, bmaj=1.895 mas, bpa=-2.259 degrees ! Estimated noise=933.894 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0008005 Jy ! Component: 100 - total flux cleaned = 0.0024783 Jy ! Component: 150 - total flux cleaned = 0.00390787 Jy ! Component: 200 - total flux cleaned = 0.00503064 Jy ! Total flux subtracted in 200 components = 0.00503064 Jy ! Clean residual min=-0.003681 max=0.005555 Jy/beam ! Clean residual mean=-0.000017 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 1.1735 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 195 components and 1.1735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095573Jy sigma=0.000602 ! Fit after self-cal, rms=0.095314Jy sigma=0.000601 wmodel J1923-2104_X_2017_08_12_pus_map.mod ! Writing 195 model components to file: J1923-2104_X_2017_08_12_pus_map.mod wobs J1923-2104_X_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1923-2104_X_2017_08_12_pus_uvs.fits wwins J1923-2104_X_2017_08_12_pus_map.win ! wwins: Wrote 10 windows to J1923-2104_X_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474501 Jy ! Component: 100 - total flux cleaned = 0.00107568 Jy ! Component: 150 - total flux cleaned = 0.00141018 Jy ! Component: 200 - total flux cleaned = 0.0016739 Jy ! Component: 250 - total flux cleaned = 0.00172202 Jy ! Component: 300 - total flux cleaned = 0.00177002 Jy ! Component: 350 - total flux cleaned = 0.00190776 Jy ! Component: 400 - total flux cleaned = 0.00199662 Jy ! Component: 450 - total flux cleaned = 0.0021673 Jy ! Component: 500 - total flux cleaned = 0.00233099 Jy ! Component: 550 - total flux cleaned = 0.0023303 Jy ! Component: 600 - total flux cleaned = 0.00229109 Jy ! Component: 650 - total flux cleaned = 0.0022169 Jy ! Component: 700 - total flux cleaned = 0.00221684 Jy ! Component: 750 - total flux cleaned = 0.00221647 Jy ! Component: 800 - total flux cleaned = 0.00221619 Jy ! Component: 850 - total flux cleaned = 0.00221595 Jy ! Component: 900 - total flux cleaned = 0.00218232 Jy ! Component: 950 - total flux cleaned = 0.00228051 Jy ! Component: 1000 - total flux cleaned = 0.00231228 Jy ! Component: 1050 - total flux cleaned = 0.0021881 Jy ! Component: 1100 - total flux cleaned = 0.00224972 Jy ! Component: 1150 - total flux cleaned = 0.00218956 Jy ! Component: 1200 - total flux cleaned = 0.00216036 Jy ! Component: 1250 - total flux cleaned = 0.0020737 Jy ! Component: 1300 - total flux cleaned = 0.00207403 Jy ! Component: 1350 - total flux cleaned = 0.00204628 Jy ! Component: 1400 - total flux cleaned = 0.00210152 Jy ! Component: 1450 - total flux cleaned = 0.00210113 Jy ! Component: 1500 - total flux cleaned = 0.00204698 Jy ! Component: 1550 - total flux cleaned = 0.00199448 Jy ! Component: 1600 - total flux cleaned = 0.00191665 Jy ! Component: 1650 - total flux cleaned = 0.00194193 Jy ! Component: 1700 - total flux cleaned = 0.00189144 Jy ! Component: 1750 - total flux cleaned = 0.00179198 Jy ! Component: 1800 - total flux cleaned = 0.0016942 Jy ! Component: 1850 - total flux cleaned = 0.00162198 Jy ! Component: 1900 - total flux cleaned = 0.00157413 Jy ! Component: 1950 - total flux cleaned = 0.00155012 Jy ! Component: 2000 - total flux cleaned = 0.00138738 Jy ! Total flux subtracted in 2048 components = 0.00131876 Jy ! Clean residual min=-0.001340 max=0.001285 Jy/beam ! Clean residual mean=-0.000003 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 1.17482 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 329 components and 1.17482 Jy ![Exited script file: muppet] wmap "J1923-2104_X_2017_08_12_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7623 x 1.895 at -2.259 degrees (North through East) ! Clean map min=-0.0026849 max=0.85189 Jy/beam ! Writing clean map to FITS file: J1923-2104_X_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.851891 invert ! Inverting map ! Your choice of large map pixels excluded 0.233% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000423106 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.149 0.149 0.298 0.596001 1.192 2.384 4.76801 9.53601 19.072 38.1441 76.2881 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.851 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7623 x 1.895 at -2.259 degrees (North through East) ! Clean map min=-0.0026849 max=0.85189 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1923-2104_X_2017_08_12_pus_uvs.log closed on Fri May 10 15:27:56 2019