! Started logfile: J1922-1632_S_2017_10_21_pus_uvs.log on Sat May 11 21:04:47 2019 obs J1922-1632_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1922-1632_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.762731 visibilities/baseline/integration-bin. ! Found source: J1922-1632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15816 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1922-1632_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 650 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.967419Jy sigma=0.008304 ! Fit after self-cal, rms=0.931598Jy sigma=0.008021 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.522 mas, bmaj=20.06 mas, bpa=-16.65 degrees ! Estimated noise=1612.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461626 Jy ! Component: 100 - total flux cleaned = 0.0666935 Jy ! Total flux subtracted in 100 components = 0.0666935 Jy ! Clean residual min=-0.008417 max=0.012157 Jy/beam ! Clean residual mean=-0.000003 rms=0.003152 Jy/beam ! Combined flux in latest and established models = 0.0666935 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.0666935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108247Jy sigma=0.000866 ! Fit after self-cal, rms=0.107760Jy sigma=0.000862 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=21.19 mas, bpa=-15.83 degrees ! Estimated noise=741.842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279977 Jy ! Component: 100 - total flux cleaned = 0.045542 Jy ! Component: 150 - total flux cleaned = 0.0579 Jy ! Component: 200 - total flux cleaned = 0.067205 Jy ! Total flux subtracted in 200 components = 0.067205 Jy ! Clean residual min=-0.008870 max=0.013204 Jy/beam ! Clean residual mean=-0.000022 rms=0.003820 Jy/beam ! Combined flux in latest and established models = 0.133898 Jy ! Performing phase self-cal ! Adding 102 model components to the UV plane model. ! The established model now contains 138 components and 0.133898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099377Jy sigma=0.000779 ! Fit after self-cal, rms=0.098767Jy sigma=0.000775 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.03 KP 1.10 ! LA 0.92 MK 1.13 NL 1.13 OV 1.34 ! PT 0.70 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 1.13 ! LA 0.85 MK 1.16 NL 1.29 OV 1.55 ! PT 0.70 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.97 KP 1.08 ! LA 0.73 MK 1.14 NL 1.48 OV 1.34 ! PT 0.68 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.55 KP 1.00* ! LA 0.69 MK 0.94 NL 1.00* OV 1.00* ! PT 0.72 ! ! ! Fit before self-cal, rms=0.098767Jy sigma=0.000775 ! Fit after self-cal, rms=0.098049Jy sigma=0.000740 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=22.42 mas, bpa=-15.58 degrees ! Estimated noise=732.364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922346 Jy ! Component: 100 - total flux cleaned = 0.000666264 Jy ! Component: 150 - total flux cleaned = 0.000526127 Jy ! Component: 200 - total flux cleaned = 0.000397935 Jy ! Total flux subtracted in 200 components = 0.000397935 Jy ! Clean residual min=-0.005159 max=0.010436 Jy/beam ! Clean residual mean=0.000012 rms=0.002179 Jy/beam ! Combined flux in latest and established models = 0.134296 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 154 components and 0.134296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097871Jy sigma=0.000739 ! Fit after self-cal, rms=0.099029Jy sigma=0.000735 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099029Jy sigma=0.000735 ! Fit after self-cal, rms=0.102649Jy sigma=0.000731 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=22.56 mas, bpa=-15.45 degrees ! Estimated noise=725.153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011854 Jy ! Component: 100 - total flux cleaned = 0.000689713 Jy ! Component: 150 - total flux cleaned = 0.000337757 Jy ! Component: 200 - total flux cleaned = 0.00017917 Jy ! Total flux subtracted in 200 components = 0.00017917 Jy ! Clean residual min=-0.005181 max=0.009285 Jy/beam ! Clean residual mean=0.000021 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.134476 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 170 components and 0.134476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102483Jy sigma=0.000731 ! Fit after self-cal, rms=0.102757Jy sigma=0.000730 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-37, 118.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00909819 Jy ! Component: 100 - total flux cleaned = 0.0137337 Jy ! Component: 150 - total flux cleaned = 0.0165996 Jy ! Component: 200 - total flux cleaned = 0.0180232 Jy ! Total flux subtracted in 200 components = 0.0180232 Jy ! Clean residual min=-0.004222 max=0.005108 Jy/beam ! Clean residual mean=0.000010 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.152499 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 218 components and 0.152499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101847Jy sigma=0.000722 ! Fit after self-cal, rms=0.101544Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101544Jy sigma=0.000719 ! Fit after self-cal, rms=0.098033Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=22.43 mas, bpa=-15.33 degrees ! Estimated noise=706.848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562224 Jy ! Component: 100 - total flux cleaned = 0.00818252 Jy ! Component: 150 - total flux cleaned = 0.00945736 Jy ! Component: 200 - total flux cleaned = 0.0102984 Jy ! Total flux subtracted in 200 components = 0.0102984 Jy ! Clean residual min=-0.003511 max=0.004070 Jy/beam ! Clean residual mean=0.000005 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.162797 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 255 components and 0.162797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097678Jy sigma=0.000713 ! Fit after self-cal, rms=0.097623Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259363 Jy ! Component: 100 - total flux cleaned = 0.00349397 Jy ! Component: 150 - total flux cleaned = 0.00412249 Jy ! Component: 200 - total flux cleaned = 0.00450836 Jy ! Total flux subtracted in 200 components = 0.00450836 Jy ! Clean residual min=-0.003599 max=0.003537 Jy/beam ! Clean residual mean=0.000010 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.167306 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 292 components and 0.167306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097497Jy sigma=0.000711 ! Fit after self-cal, rms=0.097487Jy sigma=0.000710 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097487Jy sigma=0.000710 ! Fit after self-cal, rms=0.097726Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.951 mas, bmaj=30.24 mas, bpa=-7.405 degrees ! Estimated noise=830.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347538 Jy ! Component: 100 - total flux cleaned = 0.00414218 Jy ! Component: 150 - total flux cleaned = 0.00440057 Jy ! Component: 200 - total flux cleaned = 0.00450656 Jy ! Total flux subtracted in 200 components = 0.00450656 Jy ! Clean residual min=-0.004183 max=0.004213 Jy/beam ! Clean residual mean=0.000003 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.171812 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 313 components and 0.171812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097628Jy sigma=0.000708 ! Fit after self-cal, rms=0.097578Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144306 Jy ! Component: 100 - total flux cleaned = 0.00192729 Jy ! Component: 150 - total flux cleaned = 0.00197152 Jy ! Component: 200 - total flux cleaned = 0.00197355 Jy ! Total flux subtracted in 200 components = 0.00197355 Jy ! Clean residual min=-0.004195 max=0.003571 Jy/beam ! Clean residual mean=0.000008 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.173786 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 334 components and 0.173786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097543Jy sigma=0.000707 ! Fit after self-cal, rms=0.097457Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=22.43 mas, bpa=-15.24 degrees ! Estimated noise=692.831 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 22.43 at -15.24 degrees (North through East) ! Clean map min=-0.0031188 max=0.0522 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.562 mas, bmaj=20.69 mas, bpa=-15.97 degrees ! Estimated noise=1556.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414781 Jy ! Component: 100 - total flux cleaned = 0.0640776 Jy ! Component: 150 - total flux cleaned = 0.0805534 Jy ! Component: 200 - total flux cleaned = 0.0936673 Jy ! Total flux subtracted in 200 components = 0.0936673 Jy ! Clean residual min=-0.007976 max=0.010482 Jy/beam ! Clean residual mean=0.000001 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 0.0936673 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 65 model components to the UV plane model. ! The established model now contains 65 components and 0.0936673 Jy ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=22.43 mas, bpa=-15.24 degrees ! Estimated noise=692.831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183636 Jy ! Component: 100 - total flux cleaned = 0.0317307 Jy ! Component: 150 - total flux cleaned = 0.0419059 Jy ! Component: 200 - total flux cleaned = 0.0497355 Jy ! Total flux subtracted in 200 components = 0.0497355 Jy ! Clean residual min=-0.005998 max=0.006637 Jy/beam ! Clean residual mean=-0.000010 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.143403 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 130 components and 0.143403 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.951 mas, bmaj=30.24 mas, bpa=-7.405 degrees ! Estimated noise=830.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00971671 Jy ! Component: 100 - total flux cleaned = 0.0160011 Jy ! Component: 150 - total flux cleaned = 0.0201936 Jy ! Component: 200 - total flux cleaned = 0.0231135 Jy ! Total flux subtracted in 200 components = 0.0231135 Jy ! Clean residual min=-0.005221 max=0.004156 Jy/beam ! Clean residual mean=0.000002 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.166516 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136204 Jy ! Component: 100 - total flux cleaned = 0.00220409 Jy ! Component: 150 - total flux cleaned = 0.00293937 Jy ! Component: 200 - total flux cleaned = 0.00358426 Jy ! Total flux subtracted in 200 components = 0.00358426 Jy ! Clean residual min=-0.004262 max=0.004192 Jy/beam ! Clean residual mean=0.000001 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.170101 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 209 components and 0.170101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=22.43 mas, bpa=-15.24 degrees ! Estimated noise=692.831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691422 Jy ! Component: 100 - total flux cleaned = 0.000916541 Jy ! Component: 150 - total flux cleaned = 0.0012032 Jy ! Component: 200 - total flux cleaned = 0.00112318 Jy ! Total flux subtracted in 200 components = 0.00112318 Jy ! Clean residual min=-0.003103 max=0.003492 Jy/beam ! Clean residual mean=0.000007 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.171224 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 229 components and 0.171224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097538Jy sigma=0.000708 ! Fit after self-cal, rms=0.097553Jy sigma=0.000707 wmodel J1922-1632_S_2017_10_21_pus_map.mod ! Writing 229 model components to file: J1922-1632_S_2017_10_21_pus_map.mod wobs J1922-1632_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1922-1632_S_2017_10_21_pus_uvs.fits wwins J1922-1632_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1922-1632_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364351 Jy ! Component: 100 - total flux cleaned = -0.000162444 Jy ! Component: 150 - total flux cleaned = 0.000221489 Jy ! Component: 200 - total flux cleaned = 0.000665468 Jy ! Component: 250 - total flux cleaned = 0.000914784 Jy ! Component: 300 - total flux cleaned = 0.0010748 Jy ! Component: 350 - total flux cleaned = 0.00126388 Jy ! Component: 400 - total flux cleaned = 0.00133539 Jy ! Component: 450 - total flux cleaned = 0.00147534 Jy ! Component: 500 - total flux cleaned = 0.00157691 Jy ! Component: 550 - total flux cleaned = 0.00174049 Jy ! Component: 600 - total flux cleaned = 0.00189851 Jy ! Component: 650 - total flux cleaned = 0.00196026 Jy ! Component: 700 - total flux cleaned = 0.00204981 Jy ! Component: 750 - total flux cleaned = 0.00210778 Jy ! Component: 800 - total flux cleaned = 0.00207894 Jy ! Component: 850 - total flux cleaned = 0.0020514 Jy ! Component: 900 - total flux cleaned = 0.00215915 Jy ! Component: 950 - total flux cleaned = 0.00229063 Jy ! Component: 1000 - total flux cleaned = 0.00244482 Jy ! Component: 1050 - total flux cleaned = 0.00254533 Jy ! Component: 1100 - total flux cleaned = 0.00264436 Jy ! Component: 1150 - total flux cleaned = 0.00283693 Jy ! Component: 1200 - total flux cleaned = 0.00293137 Jy ! Component: 1250 - total flux cleaned = 0.00311654 Jy ! Component: 1300 - total flux cleaned = 0.00323006 Jy ! Component: 1350 - total flux cleaned = 0.00338656 Jy ! Component: 1400 - total flux cleaned = 0.00349683 Jy ! Component: 1450 - total flux cleaned = 0.00356202 Jy ! Component: 1500 - total flux cleaned = 0.00366889 Jy ! Component: 1550 - total flux cleaned = 0.00375333 Jy ! Component: 1600 - total flux cleaned = 0.00385755 Jy ! Component: 1650 - total flux cleaned = 0.0040014 Jy ! Component: 1700 - total flux cleaned = 0.00412305 Jy ! Component: 1750 - total flux cleaned = 0.00418319 Jy ! Component: 1800 - total flux cleaned = 0.00428198 Jy ! Component: 1850 - total flux cleaned = 0.00432089 Jy ! Component: 1900 - total flux cleaned = 0.00437896 Jy ! Component: 1950 - total flux cleaned = 0.00447443 Jy ! Component: 2000 - total flux cleaned = 0.00453108 Jy ! Component: 2050 - total flux cleaned = 0.00464265 Jy ! Component: 2100 - total flux cleaned = 0.00475287 Jy ! Component: 2150 - total flux cleaned = 0.00480745 Jy ! Component: 2200 - total flux cleaned = 0.00489732 Jy ! Component: 2250 - total flux cleaned = 0.00498627 Jy ! Component: 2300 - total flux cleaned = 0.00502138 Jy ! Component: 2350 - total flux cleaned = 0.00507366 Jy ! Component: 2400 - total flux cleaned = 0.0051253 Jy ! Component: 2450 - total flux cleaned = 0.00519352 Jy ! Component: 2500 - total flux cleaned = 0.00524409 Jy ! Component: 2550 - total flux cleaned = 0.00532763 Jy ! Component: 2600 - total flux cleaned = 0.00537739 Jy ! Component: 2650 - total flux cleaned = 0.00542667 Jy ! Component: 2700 - total flux cleaned = 0.00547554 Jy ! Component: 2750 - total flux cleaned = 0.00558874 Jy ! Component: 2800 - total flux cleaned = 0.00562075 Jy ! Component: 2850 - total flux cleaned = 0.00570034 Jy ! Component: 2900 - total flux cleaned = 0.00581064 Jy ! Component: 2950 - total flux cleaned = 0.00584177 Jy ! Component: 3000 - total flux cleaned = 0.00588841 Jy ! Component: 3050 - total flux cleaned = 0.00596549 Jy ! Component: 3100 - total flux cleaned = 0.00605727 Jy ! Component: 3150 - total flux cleaned = 0.00613318 Jy ! Component: 3200 - total flux cleaned = 0.00619341 Jy ! Component: 3250 - total flux cleaned = 0.00625324 Jy ! Component: 3300 - total flux cleaned = 0.00635715 Jy ! Component: 3350 - total flux cleaned = 0.00637184 Jy ! Component: 3400 - total flux cleaned = 0.00638653 Jy ! Component: 3450 - total flux cleaned = 0.00645933 Jy ! Component: 3500 - total flux cleaned = 0.00648824 Jy ! Component: 3550 - total flux cleaned = 0.00653128 Jy ! Component: 3600 - total flux cleaned = 0.00655978 Jy ! Component: 3650 - total flux cleaned = 0.00661635 Jy ! Component: 3700 - total flux cleaned = 0.00661633 Jy ! Component: 3750 - total flux cleaned = 0.00661623 Jy ! Component: 3800 - total flux cleaned = 0.00664415 Jy ! Component: 3850 - total flux cleaned = 0.00669951 Jy ! Component: 3900 - total flux cleaned = 0.00676842 Jy ! Component: 3950 - total flux cleaned = 0.00683701 Jy ! Component: 4000 - total flux cleaned = 0.0068918 Jy ! Component: 4050 - total flux cleaned = 0.00696003 Jy ! Total flux subtracted in 4096 components = 0.00702803 Jy ! Clean residual min=-0.000788 max=0.000777 Jy/beam ! Clean residual mean=-0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.178252 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 522 components and 0.178252 Jy ![Exited script file: muppet] wmap "J1922-1632_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 22.43 at -15.24 degrees (North through East) ! Clean map min=-0.0024967 max=0.051277 Jy/beam ! Writing clean map to FITS file: J1922-1632_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0512766 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0002536 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.48372 1.48372 2.96744 5.93487 11.8697 23.7395 47.479 94.958 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.251 x 22.43 at -15.24 degrees (North through East) ! Clean map min=-0.0024967 max=0.051277 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1922-1632_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:04:52 2019