! Started logfile: J1922-1632_S_2017_05_27_pus_uvs.log on Fri May 3 11:13:32 2019 obs J1922-1632_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1922-1632_S_2017_05_27_pus_uva.fits ! AN table 1: 156 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.964672 visibilities/baseline/integration-bin. ! Found source: J1922-1632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 27088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1922-1632_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 796 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984553Jy sigma=0.044399 ! Fit after self-cal, rms=0.943899Jy sigma=0.044251 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=7.034 mas, bpa=-11.79 degrees ! Estimated noise=583.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210515 Jy ! Component: 100 - total flux cleaned = 0.0299261 Jy ! Total flux subtracted in 100 components = 0.0299261 Jy ! Clean residual min=-0.008018 max=0.008955 Jy/beam ! Clean residual mean=-0.000019 rms=0.002335 Jy/beam ! Combined flux in latest and established models = 0.0299261 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0299261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127838Jy sigma=0.001341 ! Fit after self-cal, rms=0.127529Jy sigma=0.001332 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=8.509 mas, bpa=-7.24 degrees ! Estimated noise=341.899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00989533 Jy ! Component: 100 - total flux cleaned = 0.0151822 Jy ! Component: 150 - total flux cleaned = 0.018152 Jy ! Component: 200 - total flux cleaned = 0.0197773 Jy ! Total flux subtracted in 200 components = 0.0197773 Jy ! Clean residual min=-0.012930 max=0.013941 Jy/beam ! Clean residual mean=-0.000057 rms=0.004076 Jy/beam ! Combined flux in latest and established models = 0.0497034 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.0497034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123353Jy sigma=0.001836 ! Fit after self-cal, rms=0.123193Jy sigma=0.001836 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.48 FD 0.63 HN 1.15 KP 0.64 ! LA 0.52 MK 0.79 NL 0.96 OV 0.88 ! PT 0.52 SC 1.18 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 14.96 FD 0.70 HN 1.13 KP 0.63 ! LA 0.52 MK 0.89 NL 1.16 OV 0.95 ! PT 0.52 SC 1.32 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.66 HN 0.94 KP 0.60 ! LA 0.54 MK 0.80 NL 1.03 OV 0.76 ! PT 0.52 SC 1.15 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.87 KP 1.00* ! LA 17.13 MK 0.55 NL 1.00* OV 1.00* ! PT 0.70 SC 1.00* ! ! ! Fit before self-cal, rms=0.123193Jy sigma=0.001836 ! Fit after self-cal, rms=0.699790Jy sigma=0.000751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=9.257 mas, bpa=-7.62 degrees ! Estimated noise=379.957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-37.5, 117.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774394 Jy ! Component: 100 - total flux cleaned = 0.0120267 Jy ! Component: 150 - total flux cleaned = 0.0150585 Jy ! Component: 200 - total flux cleaned = 0.0172804 Jy ! Total flux subtracted in 200 components = 0.0172804 Jy ! Clean residual min=-0.003942 max=0.004396 Jy/beam ! Clean residual mean=-0.000034 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.0669838 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 58 components and 0.0669838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.699138Jy sigma=0.000732 ! Fit after self-cal, rms=0.699507Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.699507Jy sigma=0.000706 ! Fit after self-cal, rms=0.862490Jy sigma=0.000696 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=9.363 mas, bpa=-9.44 degrees ! Estimated noise=370.777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338139 Jy ! Component: 100 - total flux cleaned = 0.00503932 Jy ! Component: 150 - total flux cleaned = 0.00589024 Jy ! Component: 200 - total flux cleaned = 0.00651661 Jy ! Total flux subtracted in 200 components = 0.00651661 Jy ! Clean residual min=-0.002629 max=0.002989 Jy/beam ! Clean residual mean=-0.000017 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.0735004 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 80 components and 0.0735004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.862221Jy sigma=0.000693 ! Fit after self-cal, rms=0.862269Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123907 Jy ! Component: 100 - total flux cleaned = 0.00190367 Jy ! Component: 150 - total flux cleaned = 0.00225939 Jy ! Component: 200 - total flux cleaned = 0.00240992 Jy ! Total flux subtracted in 200 components = 0.00240992 Jy ! Clean residual min=-0.002364 max=0.002967 Jy/beam ! Clean residual mean=-0.000013 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0759103 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 95 components and 0.0759103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.862149Jy sigma=0.000691 ! Fit after self-cal, rms=0.862119Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.862119Jy sigma=0.000690 ! Fit after self-cal, rms=0.780500Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=9.332 mas, bpa=-9.982 degrees ! Estimated noise=366.666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133283 Jy ! Component: 100 - total flux cleaned = 0.00174572 Jy ! Component: 150 - total flux cleaned = 0.00174533 Jy ! Component: 200 - total flux cleaned = 0.00178233 Jy ! Total flux subtracted in 200 components = 0.00178233 Jy ! Clean residual min=-0.002159 max=0.002844 Jy/beam ! Clean residual mean=-0.000007 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0776926 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.0776926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780470Jy sigma=0.000677 ! Fit after self-cal, rms=0.780418Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-104, -32.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298456 Jy ! Component: 100 - total flux cleaned = 0.00447909 Jy ! Component: 150 - total flux cleaned = 0.00550187 Jy ! Component: 200 - total flux cleaned = 0.00591506 Jy ! Total flux subtracted in 200 components = 0.00591506 Jy ! Clean residual min=-0.001812 max=0.002226 Jy/beam ! Clean residual mean=-0.000006 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0836077 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 137 components and 0.0836077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780371Jy sigma=0.000674 ! Fit after self-cal, rms=0.780376Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780376Jy sigma=0.000673 ! Fit after self-cal, rms=0.792554Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.82 mas, bmaj=19.33 mas, bpa=-5.101 degrees ! Estimated noise=408.213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189441 Jy ! Component: 100 - total flux cleaned = 0.00297216 Jy ! Component: 150 - total flux cleaned = 0.00337229 Jy ! Component: 200 - total flux cleaned = 0.00362143 Jy ! Total flux subtracted in 200 components = 0.00362143 Jy ! Clean residual min=-0.002307 max=0.002561 Jy/beam ! Clean residual mean=-0.000012 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0872291 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 153 components and 0.0872291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.792510Jy sigma=0.000672 ! Fit after self-cal, rms=0.792504Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000654917 Jy ! Component: 100 - total flux cleaned = 0.000807537 Jy ! Component: 150 - total flux cleaned = 0.000862027 Jy ! Component: 200 - total flux cleaned = 0.000912957 Jy ! Total flux subtracted in 200 components = 0.000912957 Jy ! Clean residual min=-0.002291 max=0.002565 Jy/beam ! Clean residual mean=-0.000012 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.0881421 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 161 components and 0.0881421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.792485Jy sigma=0.000672 ! Fit after self-cal, rms=0.792480Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=9.35 mas, bpa=-10.11 degrees ! Estimated noise=366.633 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.305 x 9.35 at -10.11 degrees (North through East) ! Clean map min=-0.0031637 max=0.028437 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=7.65 mas, bpa=-11.34 degrees ! Estimated noise=676.138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246211 Jy ! Component: 100 - total flux cleaned = 0.036825 Jy ! Component: 150 - total flux cleaned = 0.0452404 Jy ! Component: 200 - total flux cleaned = 0.0517215 Jy ! Total flux subtracted in 200 components = 0.0517215 Jy ! Clean residual min=-0.003176 max=0.004630 Jy/beam ! Clean residual mean=-0.000010 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.0517215 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0517215 Jy ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=9.35 mas, bpa=-10.11 degrees ! Estimated noise=366.633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081191 Jy ! Component: 100 - total flux cleaned = 0.013872 Jy ! Component: 150 - total flux cleaned = 0.0183956 Jy ! Component: 200 - total flux cleaned = 0.0220689 Jy ! Total flux subtracted in 200 components = 0.0220689 Jy ! Clean residual min=-0.002733 max=0.003187 Jy/beam ! Clean residual mean=-0.000015 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.0737905 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 76 components and 0.0737905 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.82 mas, bmaj=19.33 mas, bpa=-5.101 degrees ! Estimated noise=408.213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471583 Jy ! Component: 100 - total flux cleaned = 0.00803392 Jy ! Component: 150 - total flux cleaned = 0.00983277 Jy ! Component: 200 - total flux cleaned = 0.0108502 Jy ! Total flux subtracted in 200 components = 0.0108502 Jy ! Clean residual min=-0.002523 max=0.002757 Jy/beam ! Clean residual mean=-0.000014 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0846407 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000769779 Jy ! Component: 100 - total flux cleaned = 0.00140877 Jy ! Component: 150 - total flux cleaned = 0.00176944 Jy ! Component: 200 - total flux cleaned = 0.00197069 Jy ! Total flux subtracted in 200 components = 0.00197069 Jy ! Clean residual min=-0.002323 max=0.002789 Jy/beam ! Clean residual mean=-0.000011 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0866114 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 136 components and 0.0866114 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=9.35 mas, bpa=-10.11 degrees ! Estimated noise=366.633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810149 Jy ! Component: 100 - total flux cleaned = 0.000867545 Jy ! Component: 150 - total flux cleaned = 0.000913668 Jy ! Component: 200 - total flux cleaned = 0.000911881 Jy ! Total flux subtracted in 200 components = 0.000911881 Jy ! Clean residual min=-0.001999 max=0.001927 Jy/beam ! Clean residual mean=-0.000007 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0875233 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 156 components and 0.0875233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.792369Jy sigma=0.000672 ! Fit after self-cal, rms=0.792372Jy sigma=0.000671 wmodel J1922-1632_S_2017_05_27_pus_map.mod ! Writing 156 model components to file: J1922-1632_S_2017_05_27_pus_map.mod wobs J1922-1632_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1922-1632_S_2017_05_27_pus_uvs.fits wwins J1922-1632_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J1922-1632_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266786 Jy ! Component: 100 - total flux cleaned = 0.000528649 Jy ! Component: 150 - total flux cleaned = 0.0006542 Jy ! Component: 200 - total flux cleaned = 0.000774723 Jy ! Component: 250 - total flux cleaned = 0.000891159 Jy ! Component: 300 - total flux cleaned = 0.00105903 Jy ! Component: 350 - total flux cleaned = 0.00111282 Jy ! Component: 400 - total flux cleaned = 0.00116542 Jy ! Component: 450 - total flux cleaned = 0.0011903 Jy ! Component: 500 - total flux cleaned = 0.00126413 Jy ! Component: 550 - total flux cleaned = 0.00126378 Jy ! Component: 600 - total flux cleaned = 0.00131138 Jy ! Component: 650 - total flux cleaned = 0.0013116 Jy ! Component: 700 - total flux cleaned = 0.00131207 Jy ! Component: 750 - total flux cleaned = 0.00133456 Jy ! Component: 800 - total flux cleaned = 0.00133528 Jy ! Component: 850 - total flux cleaned = 0.00135696 Jy ! Component: 900 - total flux cleaned = 0.0013151 Jy ! Component: 950 - total flux cleaned = 0.00127427 Jy ! Component: 1000 - total flux cleaned = 0.00123369 Jy ! Component: 1050 - total flux cleaned = 0.00123362 Jy ! Component: 1100 - total flux cleaned = 0.00121421 Jy ! Component: 1150 - total flux cleaned = 0.00125249 Jy ! Component: 1200 - total flux cleaned = 0.00123339 Jy ! Component: 1250 - total flux cleaned = 0.00121487 Jy ! Component: 1300 - total flux cleaned = 0.00123323 Jy ! Component: 1350 - total flux cleaned = 0.00126919 Jy ! Component: 1400 - total flux cleaned = 0.00126969 Jy ! Component: 1450 - total flux cleaned = 0.0013046 Jy ! Component: 1500 - total flux cleaned = 0.00137349 Jy ! Component: 1550 - total flux cleaned = 0.00144136 Jy ! Component: 1600 - total flux cleaned = 0.00144124 Jy ! Component: 1650 - total flux cleaned = 0.00149097 Jy ! Component: 1700 - total flux cleaned = 0.00152356 Jy ! Component: 1750 - total flux cleaned = 0.001604 Jy ! Component: 1800 - total flux cleaned = 0.00155643 Jy ! Component: 1850 - total flux cleaned = 0.0016195 Jy ! Component: 1900 - total flux cleaned = 0.00165056 Jy ! Component: 1950 - total flux cleaned = 0.00169644 Jy ! Component: 2000 - total flux cleaned = 0.00169609 Jy ! Component: 2050 - total flux cleaned = 0.00171093 Jy ! Component: 2100 - total flux cleaned = 0.00174027 Jy ! Component: 2150 - total flux cleaned = 0.00168184 Jy ! Component: 2200 - total flux cleaned = 0.00172505 Jy ! Component: 2250 - total flux cleaned = 0.00168247 Jy ! Component: 2300 - total flux cleaned = 0.00168271 Jy ! Component: 2350 - total flux cleaned = 0.00168282 Jy ! Component: 2400 - total flux cleaned = 0.00168264 Jy ! Component: 2450 - total flux cleaned = 0.00170997 Jy ! Component: 2500 - total flux cleaned = 0.00169634 Jy ! Component: 2550 - total flux cleaned = 0.00164283 Jy ! Component: 2600 - total flux cleaned = 0.00169587 Jy ! Component: 2650 - total flux cleaned = 0.00170896 Jy ! Component: 2700 - total flux cleaned = 0.0016961 Jy ! Component: 2750 - total flux cleaned = 0.00170899 Jy ! Component: 2800 - total flux cleaned = 0.00168345 Jy ! Component: 2850 - total flux cleaned = 0.00168344 Jy ! Component: 2900 - total flux cleaned = 0.00165854 Jy ! Component: 2950 - total flux cleaned = 0.00168347 Jy ! Component: 3000 - total flux cleaned = 0.00170785 Jy ! Component: 3050 - total flux cleaned = 0.00165891 Jy ! Component: 3100 - total flux cleaned = 0.00163468 Jy ! Component: 3150 - total flux cleaned = 0.00162281 Jy ! Component: 3200 - total flux cleaned = 0.00161098 Jy ! Component: 3250 - total flux cleaned = 0.0015992 Jy ! Component: 3300 - total flux cleaned = 0.00157594 Jy ! Component: 3350 - total flux cleaned = 0.00156448 Jy ! Component: 3400 - total flux cleaned = 0.00159885 Jy ! Component: 3450 - total flux cleaned = 0.00159885 Jy ! Component: 3500 - total flux cleaned = 0.00162115 Jy ! Component: 3550 - total flux cleaned = 0.00156527 Jy ! Component: 3600 - total flux cleaned = 0.00154313 Jy ! Component: 3650 - total flux cleaned = 0.00154321 Jy ! Component: 3700 - total flux cleaned = 0.0015432 Jy ! Component: 3750 - total flux cleaned = 0.0015541 Jy ! Component: 3800 - total flux cleaned = 0.00152168 Jy ! Component: 3850 - total flux cleaned = 0.00153238 Jy ! Component: 3900 - total flux cleaned = 0.00153239 Jy ! Component: 3950 - total flux cleaned = 0.00155329 Jy ! Component: 4000 - total flux cleaned = 0.00158465 Jy ! Component: 4050 - total flux cleaned = 0.0015845 Jy ! Total flux subtracted in 4096 components = 0.00157428 Jy ! Clean residual min=-0.000605 max=0.000515 Jy/beam ! Clean residual mean=-0.000002 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.0890976 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 445 components and 0.0890976 Jy ![Exited script file: muppet] wmap "J1922-1632_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.305 x 9.35 at -10.11 degrees (North through East) ! Clean map min=-0.0026766 max=0.030666 Jy/beam ! Writing clean map to FITS file: J1922-1632_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0306656 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019077 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.8663 1.8663 3.7326 7.46519 14.9304 29.8608 59.7215 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.03 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.305 x 9.35 at -10.11 degrees (North through East) ! Clean map min=-0.0026766 max=0.030666 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1922-1632_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:13:37 2019