! Started logfile: J1922+1530_S_2017_06_10_pus_uvs.log on Mon May 6 15:00:45 2019 obs J1922+1530_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1922+1530_S_2017_06_10_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.985729 visibilities/baseline/integration-bin. ! Found source: J1922+1530 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 38680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1922+1530_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1301 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985128Jy sigma=0.009919 ! Fit after self-cal, rms=0.959596Jy sigma=0.009677 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=6.706 mas, bpa=-5.446 degrees ! Estimated noise=688.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291479 Jy ! Component: 100 - total flux cleaned = 0.0383114 Jy ! Total flux subtracted in 100 components = 0.0383114 Jy ! Clean residual min=-0.004630 max=0.006992 Jy/beam ! Clean residual mean=0.000004 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.0383114 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0383114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084295Jy sigma=0.000824 ! Fit after self-cal, rms=0.083481Jy sigma=0.000816 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.541 mas, bpa=-5.29 degrees ! Estimated noise=409.843 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146964 Jy ! Component: 100 - total flux cleaned = 0.024492 Jy ! Component: 150 - total flux cleaned = 0.0312293 Jy ! Component: 200 - total flux cleaned = 0.0358649 Jy ! Total flux subtracted in 200 components = 0.0358649 Jy ! Clean residual min=-0.007124 max=0.012086 Jy/beam ! Clean residual mean=-0.000033 rms=0.002862 Jy/beam ! Combined flux in latest and established models = 0.0741762 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 0.0741762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080470Jy sigma=0.000783 ! Fit after self-cal, rms=0.080165Jy sigma=0.000779 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.54 FD 1.04 HN 1.44 KP 1.20 ! LA 0.63 MK 1.32 NL 2.05 OV 2.95 ! PT 0.53 SC 1.35 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 1.08 HN 1.46 KP 1.12 ! LA 0.59 MK 1.36 NL 2.28 OV 3.12 ! PT 0.52 SC 1.56 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.36 FD 1.12 HN 1.48 KP 1.10 ! LA 0.59 MK 1.46 NL 2.23 OV 2.73 ! PT 0.50 SC 1.58 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.16 KP 1.00* ! LA 0.46 MK 0.99 NL 1.00* OV 1.00* ! PT 0.62 SC 1.00* ! ! ! Fit before self-cal, rms=0.080165Jy sigma=0.000779 ! Fit after self-cal, rms=0.156467Jy sigma=0.000698 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.654 mas, bmaj=8.687 mas, bpa=-6.237 degrees ! Estimated noise=494.895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294865 Jy ! Component: 100 - total flux cleaned = 0.0024261 Jy ! Component: 150 - total flux cleaned = 0.00198685 Jy ! Component: 200 - total flux cleaned = 0.0016076 Jy ! Total flux subtracted in 200 components = 0.0016076 Jy ! Clean residual min=-0.004967 max=0.006358 Jy/beam ! Clean residual mean=-0.000037 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 0.0757838 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0757839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155745Jy sigma=0.000700 ! Fit after self-cal, rms=0.160600Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160600Jy sigma=0.000684 ! Fit after self-cal, rms=0.220671Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=9.054 mas, bpa=-6.95 degrees ! Estimated noise=554.064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149998 Jy ! Component: 100 - total flux cleaned = 0.0012248 Jy ! Component: 150 - total flux cleaned = 0.00103854 Jy ! Component: 200 - total flux cleaned = 0.000874948 Jy ! Total flux subtracted in 200 components = 0.000874948 Jy ! Clean residual min=-0.003330 max=0.004553 Jy/beam ! Clean residual mean=-0.000005 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.0766588 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.0766588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220457Jy sigma=0.000675 ! Fit after self-cal, rms=0.221468Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346406 Jy ! Component: 100 - total flux cleaned = 0.00314317 Jy ! Component: 150 - total flux cleaned = 0.0029476 Jy ! Component: 200 - total flux cleaned = 0.00289184 Jy ! Total flux subtracted in 200 components = 0.00289184 Jy ! Clean residual min=-0.002721 max=0.003765 Jy/beam ! Clean residual mean=-0.000000 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.0795506 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.0795506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221362Jy sigma=0.000673 ! Fit after self-cal, rms=0.221053Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221053Jy sigma=0.000672 ! Fit after self-cal, rms=0.216270Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.845 mas, bmaj=9.126 mas, bpa=-7.49 degrees ! Estimated noise=557.196 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300914 Jy ! Component: 100 - total flux cleaned = 0.00300856 Jy ! Component: 150 - total flux cleaned = 0.00301027 Jy ! Component: 200 - total flux cleaned = 0.00294979 Jy ! Total flux subtracted in 200 components = 0.00294979 Jy ! Clean residual min=-0.002590 max=0.003391 Jy/beam ! Clean residual mean=0.000004 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0825004 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.0825004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216131Jy sigma=0.000671 ! Fit after self-cal, rms=0.215779Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198028 Jy ! Component: 100 - total flux cleaned = 0.00197466 Jy ! Component: 150 - total flux cleaned = 0.00190922 Jy ! Component: 200 - total flux cleaned = 0.00173407 Jy ! Total flux subtracted in 200 components = 0.00173407 Jy ! Clean residual min=-0.002855 max=0.003193 Jy/beam ! Clean residual mean=0.000006 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.0842345 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.0842345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215652Jy sigma=0.000671 ! Fit after self-cal, rms=0.215398Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215398Jy sigma=0.000670 ! Fit after self-cal, rms=0.196330Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.024 mas, bmaj=12.99 mas, bpa=-10.75 degrees ! Estimated noise=544.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314654 Jy ! Component: 100 - total flux cleaned = 0.00289464 Jy ! Component: 150 - total flux cleaned = 0.00264445 Jy ! Component: 200 - total flux cleaned = 0.00234525 Jy ! Total flux subtracted in 200 components = 0.00234525 Jy ! Clean residual min=-0.003172 max=0.003470 Jy/beam ! Clean residual mean=0.000006 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.0865797 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 96 components and 0.0865797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196250Jy sigma=0.000669 ! Fit after self-cal, rms=0.195661Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166637 Jy ! Component: 100 - total flux cleaned = 0.00143676 Jy ! Component: 150 - total flux cleaned = 0.00110898 Jy ! Component: 200 - total flux cleaned = 0.000859099 Jy ! Total flux subtracted in 200 components = 0.000859099 Jy ! Clean residual min=-0.003169 max=0.003476 Jy/beam ! Clean residual mean=0.000009 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.0874388 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 0.0874388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195599Jy sigma=0.000668 ! Fit after self-cal, rms=0.195365Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.838 mas, bmaj=9.094 mas, bpa=-7.722 degrees ! Estimated noise=547.868 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.838 x 9.094 at -7.722 degrees (North through East) ! Clean map min=-0.0042933 max=0.050921 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=7.847 mas, bpa=-8.152 degrees ! Estimated noise=1012.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401735 Jy ! Component: 100 - total flux cleaned = 0.0555248 Jy ! Component: 150 - total flux cleaned = 0.0658488 Jy ! Component: 200 - total flux cleaned = 0.0732855 Jy ! Total flux subtracted in 200 components = 0.0732855 Jy ! Clean residual min=-0.004270 max=0.005741 Jy/beam ! Clean residual mean=0.000004 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.0732855 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0732855 Jy ! Inverting map and beam ! Estimated beam: bmin=3.838 mas, bmaj=9.094 mas, bpa=-7.722 degrees ! Estimated noise=547.868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679979 Jy ! Component: 100 - total flux cleaned = 0.00957176 Jy ! Component: 150 - total flux cleaned = 0.0111975 Jy ! Component: 200 - total flux cleaned = 0.0120721 Jy ! Total flux subtracted in 200 components = 0.0120721 Jy ! Clean residual min=-0.003073 max=0.003345 Jy/beam ! Clean residual mean=0.000002 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.0853576 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 31 components and 0.0853576 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.024 mas, bmaj=12.99 mas, bpa=-10.75 degrees ! Estimated noise=544.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558684 Jy ! Component: 100 - total flux cleaned = 0.000952532 Jy ! Component: 150 - total flux cleaned = 0.000831859 Jy ! Component: 200 - total flux cleaned = 0.000550715 Jy ! Total flux subtracted in 200 components = 0.000550715 Jy ! Clean residual min=-0.003285 max=0.003198 Jy/beam ! Clean residual mean=0.000010 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.0859083 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000251941 Jy ! Component: 100 - total flux cleaned = -0.000479618 Jy ! Component: 150 - total flux cleaned = -0.000647973 Jy ! Component: 200 - total flux cleaned = -0.000841016 Jy ! Total flux subtracted in 200 components = -0.000841016 Jy ! Clean residual min=-0.003287 max=0.003140 Jy/beam ! Clean residual mean=0.000011 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.0850673 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 83 components and 0.0850673 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.838 mas, bmaj=9.094 mas, bpa=-7.722 degrees ! Estimated noise=547.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000315889 Jy ! Component: 100 - total flux cleaned = -0.000508559 Jy ! Component: 150 - total flux cleaned = -0.000567368 Jy ! Component: 200 - total flux cleaned = -0.000622547 Jy ! Total flux subtracted in 200 components = -0.000622547 Jy ! Clean residual min=-0.002909 max=0.003003 Jy/beam ! Clean residual mean=0.000007 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.0844447 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 97 components and 0.0844447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195152Jy sigma=0.000667 ! Fit after self-cal, rms=0.194729Jy sigma=0.000667 wmodel J1922+1530_S_2017_06_10_pus_map.mod ! Writing 97 model components to file: J1922+1530_S_2017_06_10_pus_map.mod wobs J1922+1530_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1922+1530_S_2017_06_10_pus_uvs.fits wwins J1922+1530_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J1922+1530_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137436 Jy ! Component: 100 - total flux cleaned = 0.00195229 Jy ! Component: 150 - total flux cleaned = 0.00259488 Jy ! Component: 200 - total flux cleaned = 0.00330178 Jy ! Component: 250 - total flux cleaned = 0.00402689 Jy ! Component: 300 - total flux cleaned = 0.00450911 Jy ! Component: 350 - total flux cleaned = 0.00497798 Jy ! Component: 400 - total flux cleaned = 0.00522781 Jy ! Component: 450 - total flux cleaned = 0.00563394 Jy ! Component: 500 - total flux cleaned = 0.0060706 Jy ! Component: 550 - total flux cleaned = 0.00634327 Jy ! Component: 600 - total flux cleaned = 0.00668801 Jy ! Component: 650 - total flux cleaned = 0.00687563 Jy ! Component: 700 - total flux cleaned = 0.00709716 Jy ! Component: 750 - total flux cleaned = 0.00713371 Jy ! Component: 800 - total flux cleaned = 0.00727646 Jy ! Component: 850 - total flux cleaned = 0.0074174 Jy ! Component: 900 - total flux cleaned = 0.00755599 Jy ! Component: 950 - total flux cleaned = 0.00765824 Jy ! Component: 1000 - total flux cleaned = 0.00782682 Jy ! Component: 1050 - total flux cleaned = 0.00802669 Jy ! Component: 1100 - total flux cleaned = 0.00822406 Jy ! Component: 1150 - total flux cleaned = 0.0083217 Jy ! Component: 1200 - total flux cleaned = 0.00844985 Jy ! Component: 1250 - total flux cleaned = 0.00844958 Jy ! Component: 1300 - total flux cleaned = 0.00854398 Jy ! Component: 1350 - total flux cleaned = 0.00866789 Jy ! Component: 1400 - total flux cleaned = 0.00882153 Jy ! Component: 1450 - total flux cleaned = 0.00894316 Jy ! Component: 1500 - total flux cleaned = 0.0090938 Jy ! Component: 1550 - total flux cleaned = 0.00924285 Jy ! Component: 1600 - total flux cleaned = 0.0094198 Jy ! Component: 1650 - total flux cleaned = 0.00953641 Jy ! Component: 1700 - total flux cleaned = 0.00965222 Jy ! Component: 1750 - total flux cleaned = 0.00976689 Jy ! Component: 1800 - total flux cleaned = 0.00985228 Jy ! Component: 1850 - total flux cleaned = 0.00999301 Jy ! Component: 1900 - total flux cleaned = 0.0100768 Jy ! Component: 1950 - total flux cleaned = 0.0102698 Jy ! Component: 2000 - total flux cleaned = 0.0103513 Jy ! Component: 2050 - total flux cleaned = 0.0104594 Jy ! Component: 2100 - total flux cleaned = 0.0105935 Jy ! Component: 2150 - total flux cleaned = 0.0107 Jy ! Component: 2200 - total flux cleaned = 0.0108316 Jy ! Component: 2250 - total flux cleaned = 0.0109362 Jy ! Component: 2300 - total flux cleaned = 0.01104 Jy ! Component: 2350 - total flux cleaned = 0.0111946 Jy ! Component: 2400 - total flux cleaned = 0.0112459 Jy ! Component: 2450 - total flux cleaned = 0.0114234 Jy ! Component: 2500 - total flux cleaned = 0.0115243 Jy ! Component: 2550 - total flux cleaned = 0.0117241 Jy ! Component: 2600 - total flux cleaned = 0.0118477 Jy ! Component: 2650 - total flux cleaned = 0.011946 Jy ! Component: 2700 - total flux cleaned = 0.0121657 Jy ! Component: 2750 - total flux cleaned = 0.0122139 Jy ! Component: 2800 - total flux cleaned = 0.012382 Jy ! Component: 2850 - total flux cleaned = 0.0125252 Jy ! Component: 2900 - total flux cleaned = 0.0126673 Jy ! Component: 2950 - total flux cleaned = 0.0127144 Jy ! Component: 3000 - total flux cleaned = 0.012948 Jy ! Component: 3050 - total flux cleaned = 0.0129711 Jy ! Component: 3100 - total flux cleaned = 0.0130633 Jy ! Component: 3150 - total flux cleaned = 0.0130862 Jy ! Component: 3200 - total flux cleaned = 0.0132456 Jy ! Component: 3250 - total flux cleaned = 0.0133358 Jy ! Component: 3300 - total flux cleaned = 0.013448 Jy ! Component: 3350 - total flux cleaned = 0.013582 Jy ! Component: 3400 - total flux cleaned = 0.0136261 Jy ! Component: 3450 - total flux cleaned = 0.0136704 Jy ! Component: 3500 - total flux cleaned = 0.01378 Jy ! Component: 3550 - total flux cleaned = 0.0138236 Jy ! Component: 3600 - total flux cleaned = 0.0139101 Jy ! Component: 3650 - total flux cleaned = 0.013996 Jy ! Component: 3700 - total flux cleaned = 0.0140174 Jy ! Component: 3750 - total flux cleaned = 0.0141447 Jy ! Component: 3800 - total flux cleaned = 0.0142291 Jy ! Component: 3850 - total flux cleaned = 0.0142082 Jy ! Component: 3900 - total flux cleaned = 0.0142918 Jy ! Component: 3950 - total flux cleaned = 0.0144786 Jy ! Component: 4000 - total flux cleaned = 0.0145404 Jy ! Component: 4050 - total flux cleaned = 0.0145404 Jy ! Total flux subtracted in 4096 components = 0.0145607 Jy ! Clean residual min=-0.001112 max=0.001107 Jy/beam ! Clean residual mean=0.000000 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0990053 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 336 components and 0.0990053 Jy ![Exited script file: muppet] wmap "J1922+1530_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.838 x 9.094 at -7.722 degrees (North through East) ! Clean map min=-0.0043253 max=0.054212 Jy/beam ! Writing clean map to FITS file: J1922+1530_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0542117 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000377359 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.08825 2.08825 4.1765 8.353 16.706 33.412 66.824 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.838 x 9.094 at -7.722 degrees (North through East) ! Clean map min=-0.0043253 max=0.054212 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1922+1530_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:00:50 2019