! Started logfile: J1920-2445_S_2017_01_21_pus_uvs.log on Sun May 5 16:00:39 2019 obs J1920-2445_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1920-2445_S_2017_01_21_pus_uva.fits ! AN table 1: 95 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.635673 visibilities/baseline/integration-bin. ! Found source: J1920-2445 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 8696 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1920-2445_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 370 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926885Jy sigma=0.005049 ! Fit after self-cal, rms=0.883657Jy sigma=0.004847 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=6.207 mas, bpa=-7.044 degrees ! Estimated noise=2373.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0989482 Jy ! Component: 100 - total flux cleaned = 0.12058 Jy ! Total flux subtracted in 100 components = 0.12058 Jy ! Clean residual min=-0.007061 max=0.009568 Jy/beam ! Clean residual mean=-0.000026 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.12058 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.12058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140153Jy sigma=0.000656 ! Fit after self-cal, rms=0.140098Jy sigma=0.000656 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=6.619 mas, bpa=-5.914 degrees ! Estimated noise=1523.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00677814 Jy ! Component: 100 - total flux cleaned = 0.00655164 Jy ! Component: 150 - total flux cleaned = 0.00661337 Jy ! Component: 200 - total flux cleaned = 0.00683214 Jy ! Total flux subtracted in 200 components = 0.00683214 Jy ! Clean residual min=-0.005010 max=0.006171 Jy/beam ! Clean residual mean=-0.000034 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.127413 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.127412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139871Jy sigma=0.000653 ! Fit after self-cal, rms=0.139871Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.10 LA 1.03 ! MK 1.04 NL 0.97 OV 1.43 PT 0.97 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.12 LA 1.01 ! MK 0.96 NL 0.95 OV 1.63 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.03 LA 0.96 ! MK 1.04 NL 1.00 OV 1.28 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.03 LA 0.89 ! MK 0.95 NL 1.00* OV 1.22 PT 0.93 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.139871Jy sigma=0.000653 ! Fit after self-cal, rms=0.153413Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=6.599 mas, bpa=-5.797 degrees ! Estimated noise=1516.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100451 Jy ! Component: 100 - total flux cleaned = -0.000980084 Jy ! Component: 150 - total flux cleaned = -0.000913304 Jy ! Component: 200 - total flux cleaned = -0.000855341 Jy ! Total flux subtracted in 200 components = -0.000855341 Jy ! Clean residual min=-0.004194 max=0.003874 Jy/beam ! Clean residual mean=0.000002 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.126557 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.126557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153396Jy sigma=0.000650 ! Fit after self-cal, rms=0.153748Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153748Jy sigma=0.000650 ! Fit after self-cal, rms=0.158352Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=6.607 mas, bpa=-5.847 degrees ! Estimated noise=1519.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000612456 Jy ! Component: 100 - total flux cleaned = -0.000653451 Jy ! Component: 150 - total flux cleaned = -0.000688719 Jy ! Component: 200 - total flux cleaned = -0.000689621 Jy ! Total flux subtracted in 200 components = -0.000689621 Jy ! Clean residual min=-0.004290 max=0.003559 Jy/beam ! Clean residual mean=0.000001 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.125868 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.125868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158343Jy sigma=0.000648 ! Fit after self-cal, rms=0.158412Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20331e-05 Jy ! Component: 100 - total flux cleaned = -2.15654e-05 Jy ! Component: 150 - total flux cleaned = -2.1807e-05 Jy ! Component: 200 - total flux cleaned = -3.37987e-05 Jy ! Total flux subtracted in 200 components = -3.37987e-05 Jy ! Clean residual min=-0.004221 max=0.003591 Jy/beam ! Clean residual mean=0.000001 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.125834 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.125834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158407Jy sigma=0.000648 ! Fit after self-cal, rms=0.158412Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158412Jy sigma=0.000648 ! Fit after self-cal, rms=0.159364Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=6.617 mas, bpa=-5.893 degrees ! Estimated noise=1519.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000577314 Jy ! Component: 100 - total flux cleaned = -0.00066389 Jy ! Component: 150 - total flux cleaned = -0.000724164 Jy ! Component: 200 - total flux cleaned = -0.000789436 Jy ! Total flux subtracted in 200 components = -0.000789436 Jy ! Clean residual min=-0.004267 max=0.003621 Jy/beam ! Clean residual mean=0.000000 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.125044 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.125044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159356Jy sigma=0.000648 ! Fit after self-cal, rms=0.159366Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.06865e-05 Jy ! Component: 100 - total flux cleaned = 8.55297e-06 Jy ! Component: 150 - total flux cleaned = -2.42276e-05 Jy ! Component: 200 - total flux cleaned = -4.43257e-05 Jy ! Total flux subtracted in 200 components = -4.43257e-05 Jy ! Clean residual min=-0.004228 max=0.003616 Jy/beam ! Clean residual mean=-0.000000 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.125 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159362Jy sigma=0.000648 ! Fit after self-cal, rms=0.159363Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159363Jy sigma=0.000648 ! Fit after self-cal, rms=0.159360Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.485 mas, bmaj=14.79 mas, bpa=5.259 degrees ! Estimated noise=2152.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000491314 Jy ! Component: 100 - total flux cleaned = -0.000492592 Jy ! Component: 150 - total flux cleaned = -0.000492248 Jy ! Component: 200 - total flux cleaned = -0.000483222 Jy ! Total flux subtracted in 200 components = -0.000483222 Jy ! Clean residual min=-0.004121 max=0.004051 Jy/beam ! Clean residual mean=0.000003 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.124517 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 0.124517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159360Jy sigma=0.000648 ! Fit after self-cal, rms=0.159363Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.10704e-05 Jy ! Component: 100 - total flux cleaned = 2.114e-05 Jy ! Component: 150 - total flux cleaned = 2.12746e-05 Jy ! Component: 200 - total flux cleaned = 2.20615e-05 Jy ! Total flux subtracted in 200 components = 2.20615e-05 Jy ! Clean residual min=-0.004127 max=0.004067 Jy/beam ! Clean residual mean=0.000003 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.124539 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 43 components and 0.124539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159365Jy sigma=0.000648 ! Fit after self-cal, rms=0.159369Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.627 mas, bpa=-5.917 degrees ! Estimated noise=1520.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.628 x 6.627 at -5.917 degrees (North through East) ! Clean map min=-0.0040281 max=0.12939 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.293 mas, bmaj=6.186 mas, bpa=-7.115 degrees ! Estimated noise=2450.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1019 Jy ! Component: 100 - total flux cleaned = 0.124323 Jy ! Component: 150 - total flux cleaned = 0.125393 Jy ! Component: 200 - total flux cleaned = 0.12502 Jy ! Total flux subtracted in 200 components = 0.12502 Jy ! Clean residual min=-0.005689 max=0.005988 Jy/beam ! Clean residual mean=0.000001 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.12502 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.12502 Jy ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.627 mas, bpa=-5.917 degrees ! Estimated noise=1520.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000823749 Jy ! Component: 100 - total flux cleaned = -0.000870726 Jy ! Component: 150 - total flux cleaned = -0.00090795 Jy ! Component: 200 - total flux cleaned = -0.000937398 Jy ! Total flux subtracted in 200 components = -0.000937398 Jy ! Clean residual min=-0.004300 max=0.003632 Jy/beam ! Clean residual mean=-0.000001 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.124083 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.124083 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.485 mas, bmaj=14.79 mas, bpa=5.259 degrees ! Estimated noise=2152.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286211 Jy ! Component: 100 - total flux cleaned = 0.000306922 Jy ! Component: 150 - total flux cleaned = 0.000343448 Jy ! Component: 200 - total flux cleaned = 0.000358309 Jy ! Total flux subtracted in 200 components = 0.000358309 Jy ! Clean residual min=-0.004117 max=0.004121 Jy/beam ! Clean residual mean=0.000002 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.124441 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.34619e-05 Jy ! Component: 100 - total flux cleaned = 1.36666e-05 Jy ! Component: 150 - total flux cleaned = 2.50329e-05 Jy ! Component: 200 - total flux cleaned = 3.50009e-05 Jy ! Total flux subtracted in 200 components = 3.50009e-05 Jy ! Clean residual min=-0.004109 max=0.004119 Jy/beam ! Clean residual mean=0.000002 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.124476 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.124476 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.627 mas, bpa=-5.917 degrees ! Estimated noise=1520.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111712 Jy ! Component: 100 - total flux cleaned = -0.000146458 Jy ! Component: 150 - total flux cleaned = -0.000162001 Jy ! Component: 200 - total flux cleaned = -0.000191267 Jy ! Total flux subtracted in 200 components = -0.000191267 Jy ! Clean residual min=-0.004346 max=0.003669 Jy/beam ! Clean residual mean=-0.000000 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.124285 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.124285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159361Jy sigma=0.000648 ! Fit after self-cal, rms=0.159365Jy sigma=0.000648 wmodel J1920-2445_S_2017_01_21_pus_map.mod ! Writing 32 model components to file: J1920-2445_S_2017_01_21_pus_map.mod wobs J1920-2445_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1920-2445_S_2017_01_21_pus_uvs.fits wwins J1920-2445_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1920-2445_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000842007 Jy ! Component: 100 - total flux cleaned = -0.00108621 Jy ! Component: 150 - total flux cleaned = -0.001252 Jy ! Component: 200 - total flux cleaned = -0.00141463 Jy ! Component: 250 - total flux cleaned = -0.00162141 Jy ! Component: 300 - total flux cleaned = -0.00177091 Jy ! Component: 350 - total flux cleaned = -0.00191718 Jy ! Component: 400 - total flux cleaned = -0.00215487 Jy ! Component: 450 - total flux cleaned = -0.00247889 Jy ! Component: 500 - total flux cleaned = -0.00261365 Jy ! Component: 550 - total flux cleaned = -0.00279105 Jy ! Component: 600 - total flux cleaned = -0.00300817 Jy ! Component: 650 - total flux cleaned = -0.00321976 Jy ! Component: 700 - total flux cleaned = -0.00334428 Jy ! Component: 750 - total flux cleaned = -0.00354844 Jy ! Component: 800 - total flux cleaned = -0.00374965 Jy ! Component: 850 - total flux cleaned = -0.00374999 Jy ! Component: 900 - total flux cleaned = -0.00398436 Jy ! Component: 950 - total flux cleaned = -0.00409839 Jy ! Component: 1000 - total flux cleaned = -0.00421134 Jy ! Component: 1050 - total flux cleaned = -0.00435955 Jy ! Component: 1100 - total flux cleaned = -0.00461463 Jy ! Component: 1150 - total flux cleaned = -0.00464948 Jy ! Component: 1200 - total flux cleaned = -0.00468502 Jy ! Component: 1250 - total flux cleaned = -0.00486002 Jy ! Component: 1300 - total flux cleaned = -0.00499794 Jy ! Component: 1350 - total flux cleaned = -0.00503151 Jy ! Component: 1400 - total flux cleaned = -0.00516566 Jy ! Component: 1450 - total flux cleaned = -0.00523237 Jy ! Component: 1500 - total flux cleaned = -0.00536317 Jy ! Component: 1550 - total flux cleaned = -0.00533086 Jy ! Component: 1600 - total flux cleaned = -0.00536308 Jy ! Component: 1650 - total flux cleaned = -0.00552054 Jy ! Component: 1700 - total flux cleaned = -0.00558255 Jy ! Component: 1750 - total flux cleaned = -0.00564383 Jy ! Component: 1800 - total flux cleaned = -0.00570446 Jy ! Component: 1850 - total flux cleaned = -0.00570409 Jy ! Component: 1900 - total flux cleaned = -0.00588262 Jy ! Component: 1950 - total flux cleaned = -0.00600009 Jy ! Component: 2000 - total flux cleaned = -0.00605802 Jy ! Component: 2050 - total flux cleaned = -0.00614369 Jy ! Component: 2100 - total flux cleaned = -0.00617193 Jy ! Component: 2150 - total flux cleaned = -0.00620046 Jy ! Component: 2200 - total flux cleaned = -0.00620041 Jy ! Component: 2250 - total flux cleaned = -0.00620053 Jy ! Component: 2300 - total flux cleaned = -0.006338 Jy ! Component: 2350 - total flux cleaned = -0.00636506 Jy ! Component: 2400 - total flux cleaned = -0.00639226 Jy ! Component: 2450 - total flux cleaned = -0.00652621 Jy ! Component: 2500 - total flux cleaned = -0.00665871 Jy ! Component: 2550 - total flux cleaned = -0.00663237 Jy ! Component: 2600 - total flux cleaned = -0.00671096 Jy ! Component: 2650 - total flux cleaned = -0.00676267 Jy ! Component: 2700 - total flux cleaned = -0.00678815 Jy ! Component: 2750 - total flux cleaned = -0.00681375 Jy ! Component: 2800 - total flux cleaned = -0.00688983 Jy ! Component: 2850 - total flux cleaned = -0.00691519 Jy ! Component: 2900 - total flux cleaned = -0.00699027 Jy ! Component: 2950 - total flux cleaned = -0.00701483 Jy ! Component: 3000 - total flux cleaned = -0.00694099 Jy ! Component: 3050 - total flux cleaned = -0.00708826 Jy ! Component: 3100 - total flux cleaned = -0.00716128 Jy ! Component: 3150 - total flux cleaned = -0.00728226 Jy ! Component: 3200 - total flux cleaned = -0.00737872 Jy ! Component: 3250 - total flux cleaned = -0.00749816 Jy ! Component: 3300 - total flux cleaned = -0.0074981 Jy ! Component: 3350 - total flux cleaned = -0.0076161 Jy ! Component: 3400 - total flux cleaned = -0.00768663 Jy ! Component: 3450 - total flux cleaned = -0.0077102 Jy ! Component: 3500 - total flux cleaned = -0.00784959 Jy ! Component: 3550 - total flux cleaned = -0.00791895 Jy ! Component: 3600 - total flux cleaned = -0.00798803 Jy ! Component: 3650 - total flux cleaned = -0.00807956 Jy ! Component: 3700 - total flux cleaned = -0.00819325 Jy ! Component: 3750 - total flux cleaned = -0.00828395 Jy ! Component: 3800 - total flux cleaned = -0.00832889 Jy ! Component: 3850 - total flux cleaned = -0.0083515 Jy ! Component: 3900 - total flux cleaned = -0.00853029 Jy ! Component: 3950 - total flux cleaned = -0.00857479 Jy ! Component: 4000 - total flux cleaned = -0.00864117 Jy ! Component: 4050 - total flux cleaned = -0.00872943 Jy ! Total flux subtracted in 4096 components = -0.00870766 Jy ! Clean residual min=-0.001509 max=0.001331 Jy/beam ! Clean residual mean=-0.000009 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.115577 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 292 components and 0.115577 Jy ![Exited script file: muppet] wmap "J1920-2445_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.628 x 6.627 at -5.917 degrees (North through East) ! Clean map min=-0.00265 max=0.12956 Jy/beam ! Writing clean map to FITS file: J1920-2445_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129562 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000361664 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.837429 0.837429 1.67486 3.34971 6.69943 13.3989 26.7977 53.5954 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.628 x 6.627 at -5.917 degrees (North through East) ! Clean map min=-0.00265 max=0.12956 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1920-2445_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:00:43 2019