! Started logfile: J1917-1921_S_2017_05_27_pus_uvs.log on Fri May 3 11:13:28 2019 obs J1917-1921_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1917-1921_S_2017_05_27_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.904365 visibilities/baseline/integration-bin. ! Found source: J1917-1921 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 9116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1917-1921_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.790316Jy sigma=0.051931 ! Fit after self-cal, rms=0.773394Jy sigma=0.051577 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.522 mas, bmaj=8.227 mas, bpa=-8.497 degrees ! Estimated noise=1186.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106011 Jy ! Component: 100 - total flux cleaned = 0.133423 Jy ! Total flux subtracted in 100 components = 0.133423 Jy ! Clean residual min=-0.047403 max=0.058109 Jy/beam ! Clean residual mean=0.000429 rms=0.018289 Jy/beam ! Combined flux in latest and established models = 0.133423 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.133423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172163Jy sigma=0.006546 ! Fit after self-cal, rms=0.172175Jy sigma=0.006544 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=10.35 mas, bpa=-8.09 degrees ! Estimated noise=648.739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0150213 Jy ! Component: 100 - total flux cleaned = -0.0171391 Jy ! Component: 150 - total flux cleaned = -0.0190331 Jy ! Component: 200 - total flux cleaned = -0.0197413 Jy ! Total flux subtracted in 200 components = -0.0197413 Jy ! Clean residual min=-0.050027 max=0.060092 Jy/beam ! Clean residual mean=0.000723 rms=0.018473 Jy/beam ! Combined flux in latest and established models = 0.113682 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.113682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175226Jy sigma=0.005857 ! Fit after self-cal, rms=0.175146Jy sigma=0.005857 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.62 HN 0.83 KP 0.62 ! LA 0.61 MK 0.80 NL 0.60 OV 0.71 ! PT 0.66 SC 1.20 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.65 HN 0.88 KP 0.61 ! LA 0.58 MK 0.79 NL 0.72 OV 0.74 ! PT 0.62 SC 1.31 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.67 HN 0.86 KP 0.62 ! LA 0.61 MK 0.83 NL 0.68 OV 0.68 ! PT 0.62 SC 1.27 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.73 HN 0.90 KP 1.00* ! LA 36.30 MK 0.91 NL 1.00* OV 1.00* ! PT 0.68 SC 1.00* ! ! ! Fit before self-cal, rms=0.175146Jy sigma=0.005857 ! Fit after self-cal, rms=1.560455Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=9.406 mas, bpa=-7.495 degrees ! Estimated noise=641.146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00640215 Jy ! Component: 100 - total flux cleaned = 0.00952158 Jy ! Component: 150 - total flux cleaned = 0.00989916 Jy ! Component: 200 - total flux cleaned = 0.00981834 Jy ! Total flux subtracted in 200 components = 0.00981834 Jy ! Clean residual min=-0.003728 max=0.004206 Jy/beam ! Clean residual mean=0.000008 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.1235 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 44 components and 0.1235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.560045Jy sigma=0.000701 ! Fit after self-cal, rms=1.560265Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.560265Jy sigma=0.000693 ! Fit after self-cal, rms=1.487690Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=9.43 mas, bpa=-7.726 degrees ! Estimated noise=646.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029387 Jy ! Component: 100 - total flux cleaned = 0.00466047 Jy ! Component: 150 - total flux cleaned = 0.00515667 Jy ! Component: 200 - total flux cleaned = 0.0053981 Jy ! Total flux subtracted in 200 components = 0.0053981 Jy ! Clean residual min=-0.002644 max=0.003162 Jy/beam ! Clean residual mean=0.000004 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.128898 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.128898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.487435Jy sigma=0.000674 ! Fit after self-cal, rms=1.487448Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321632 Jy ! Component: 100 - total flux cleaned = 0.00426323 Jy ! Component: 150 - total flux cleaned = 0.0046813 Jy ! Component: 200 - total flux cleaned = 0.00488612 Jy ! Total flux subtracted in 200 components = 0.00488612 Jy ! Clean residual min=-0.002274 max=0.002167 Jy/beam ! Clean residual mean=0.000012 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.133784 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.133784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.487310Jy sigma=0.000672 ! Fit after self-cal, rms=1.487296Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.487296Jy sigma=0.000672 ! Fit after self-cal, rms=1.506167Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=9.37 mas, bpa=-7.613 degrees ! Estimated noise=651.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210971 Jy ! Component: 100 - total flux cleaned = 0.00353387 Jy ! Component: 150 - total flux cleaned = 0.00436995 Jy ! Component: 200 - total flux cleaned = 0.00453606 Jy ! Total flux subtracted in 200 components = 0.00453606 Jy ! Clean residual min=-0.002226 max=0.002114 Jy/beam ! Clean residual mean=0.000010 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.13832 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 111 components and 0.13832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.505954Jy sigma=0.000670 ! Fit after self-cal, rms=1.505949Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00067117 Jy ! Component: 100 - total flux cleaned = 0.000784037 Jy ! Component: 150 - total flux cleaned = 0.000889438 Jy ! Component: 200 - total flux cleaned = 0.000988758 Jy ! Total flux subtracted in 200 components = 0.000988758 Jy ! Clean residual min=-0.002127 max=0.002080 Jy/beam ! Clean residual mean=0.000011 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.139309 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 122 components and 0.139309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.505865Jy sigma=0.000670 ! Fit after self-cal, rms=1.505862Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.505862Jy sigma=0.000670 ! Fit after self-cal, rms=1.541016Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.311 mas, bmaj=19.8 mas, bpa=-3.31 degrees ! Estimated noise=727.375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235088 Jy ! Component: 100 - total flux cleaned = 0.00343878 Jy ! Component: 150 - total flux cleaned = 0.00373725 Jy ! Component: 200 - total flux cleaned = 0.0039834 Jy ! Total flux subtracted in 200 components = 0.0039834 Jy ! Clean residual min=-0.002324 max=0.002396 Jy/beam ! Clean residual mean=0.000019 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.143292 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 157 components and 0.143292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.540789Jy sigma=0.000670 ! Fit after self-cal, rms=1.540787Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587804 Jy ! Component: 100 - total flux cleaned = 0.000734995 Jy ! Component: 150 - total flux cleaned = 0.000876161 Jy ! Component: 200 - total flux cleaned = 0.000953837 Jy ! Total flux subtracted in 200 components = 0.000953837 Jy ! Clean residual min=-0.002274 max=0.002360 Jy/beam ! Clean residual mean=0.000021 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.144246 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 171 components and 0.144246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.540732Jy sigma=0.000670 ! Fit after self-cal, rms=1.540730Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=9.312 mas, bpa=-7.528 degrees ! Estimated noise=658.495 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.409 x 9.312 at -7.528 degrees (North through East) ! Clean map min=-0.0033877 max=0.13317 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=7.797 mas, bpa=-7.25 degrees ! Estimated noise=1114.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0997493 Jy ! Component: 100 - total flux cleaned = 0.122114 Jy ! Component: 150 - total flux cleaned = 0.129891 Jy ! Component: 200 - total flux cleaned = 0.132775 Jy ! Total flux subtracted in 200 components = 0.132775 Jy ! Clean residual min=-0.004415 max=0.004542 Jy/beam ! Clean residual mean=-0.000005 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.132775 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.132775 Jy ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=9.312 mas, bpa=-7.528 degrees ! Estimated noise=658.495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474195 Jy ! Component: 100 - total flux cleaned = 0.00649366 Jy ! Component: 150 - total flux cleaned = 0.00809955 Jy ! Component: 200 - total flux cleaned = 0.00937084 Jy ! Total flux subtracted in 200 components = 0.00937084 Jy ! Clean residual min=-0.002893 max=0.002847 Jy/beam ! Clean residual mean=0.000007 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.142145 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 43 components and 0.142145 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.311 mas, bmaj=19.8 mas, bpa=-3.31 degrees ! Estimated noise=727.375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234834 Jy ! Component: 100 - total flux cleaned = 0.00263693 Jy ! Component: 150 - total flux cleaned = 0.00280954 Jy ! Component: 200 - total flux cleaned = 0.00291652 Jy ! Total flux subtracted in 200 components = 0.00291652 Jy ! Clean residual min=-0.002739 max=0.002687 Jy/beam ! Clean residual mean=0.000022 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.145062 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142761 Jy ! Component: 100 - total flux cleaned = 0.000228266 Jy ! Component: 150 - total flux cleaned = 0.000189999 Jy ! Component: 200 - total flux cleaned = 0.000191633 Jy ! Total flux subtracted in 200 components = 0.000191633 Jy ! Clean residual min=-0.002699 max=0.002643 Jy/beam ! Clean residual mean=0.000023 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.145254 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 81 components and 0.145254 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=9.312 mas, bpa=-7.528 degrees ! Estimated noise=658.495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.8019e-05 Jy ! Component: 100 - total flux cleaned = 0.000101354 Jy ! Component: 150 - total flux cleaned = 0.000166792 Jy ! Component: 200 - total flux cleaned = 0.000292344 Jy ! Total flux subtracted in 200 components = 0.000292344 Jy ! Clean residual min=-0.002476 max=0.002543 Jy/beam ! Clean residual mean=0.000013 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.145546 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.145546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.540854Jy sigma=0.000673 ! Fit after self-cal, rms=1.540861Jy sigma=0.000672 wmodel J1917-1921_S_2017_05_27_pus_map.mod ! Writing 98 model components to file: J1917-1921_S_2017_05_27_pus_map.mod wobs J1917-1921_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1917-1921_S_2017_05_27_pus_uvs.fits wwins J1917-1921_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J1917-1921_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172312 Jy ! Component: 100 - total flux cleaned = 0.000462448 Jy ! Component: 150 - total flux cleaned = 0.000660687 Jy ! Component: 200 - total flux cleaned = 0.00108215 Jy ! Component: 250 - total flux cleaned = 0.00156486 Jy ! Component: 300 - total flux cleaned = 0.00181646 Jy ! Component: 350 - total flux cleaned = 0.00181592 Jy ! Component: 400 - total flux cleaned = 0.00185021 Jy ! Component: 450 - total flux cleaned = 0.00191723 Jy ! Component: 500 - total flux cleaned = 0.00195002 Jy ! Component: 550 - total flux cleaned = 0.00207984 Jy ! Component: 600 - total flux cleaned = 0.00211101 Jy ! Component: 650 - total flux cleaned = 0.00226801 Jy ! Component: 700 - total flux cleaned = 0.00239118 Jy ! Component: 750 - total flux cleaned = 0.00248283 Jy ! Component: 800 - total flux cleaned = 0.00266233 Jy ! Component: 850 - total flux cleaned = 0.00280954 Jy ! Component: 900 - total flux cleaned = 0.00292531 Jy ! Component: 950 - total flux cleaned = 0.00309733 Jy ! Component: 1000 - total flux cleaned = 0.00332331 Jy ! Component: 1050 - total flux cleaned = 0.00349106 Jy ! Component: 1100 - total flux cleaned = 0.00368393 Jy ! Component: 1150 - total flux cleaned = 0.00376529 Jy ! Component: 1200 - total flux cleaned = 0.00392728 Jy ! Component: 1250 - total flux cleaned = 0.00411338 Jy ! Component: 1300 - total flux cleaned = 0.00424488 Jy ! Component: 1350 - total flux cleaned = 0.00437504 Jy ! Component: 1400 - total flux cleaned = 0.00450385 Jy ! Component: 1450 - total flux cleaned = 0.00460596 Jy ! Component: 1500 - total flux cleaned = 0.00473196 Jy ! Component: 1550 - total flux cleaned = 0.00485677 Jy ! Component: 1600 - total flux cleaned = 0.00505401 Jy ! Component: 1650 - total flux cleaned = 0.0052004 Jy ! Component: 1700 - total flux cleaned = 0.00524867 Jy ! Component: 1750 - total flux cleaned = 0.00529665 Jy ! Component: 1800 - total flux cleaned = 0.00543916 Jy ! Component: 1850 - total flux cleaned = 0.00546294 Jy ! Component: 1900 - total flux cleaned = 0.00567314 Jy ! Component: 1950 - total flux cleaned = 0.00569628 Jy ! Component: 2000 - total flux cleaned = 0.00569657 Jy ! Component: 2050 - total flux cleaned = 0.0059016 Jy ! Component: 2100 - total flux cleaned = 0.00587915 Jy ! Component: 2150 - total flux cleaned = 0.00596916 Jy ! Component: 2200 - total flux cleaned = 0.00601398 Jy ! Component: 2250 - total flux cleaned = 0.00603622 Jy ! Component: 2300 - total flux cleaned = 0.00605833 Jy ! Component: 2350 - total flux cleaned = 0.0060585 Jy ! Component: 2400 - total flux cleaned = 0.00605862 Jy ! Component: 2450 - total flux cleaned = 0.006037 Jy ! Component: 2500 - total flux cleaned = 0.0060157 Jy ! Component: 2550 - total flux cleaned = 0.0061223 Jy ! Component: 2600 - total flux cleaned = 0.00610118 Jy ! Component: 2650 - total flux cleaned = 0.00614325 Jy ! Component: 2700 - total flux cleaned = 0.00618479 Jy ! Component: 2750 - total flux cleaned = 0.00612232 Jy ! Component: 2800 - total flux cleaned = 0.00612227 Jy ! Component: 2850 - total flux cleaned = 0.00616344 Jy ! Component: 2900 - total flux cleaned = 0.00624531 Jy ! Component: 2950 - total flux cleaned = 0.0062249 Jy ! Component: 3000 - total flux cleaned = 0.00620454 Jy ! Component: 3050 - total flux cleaned = 0.00618463 Jy ! Component: 3100 - total flux cleaned = 0.00624493 Jy ! Component: 3150 - total flux cleaned = 0.00622481 Jy ! Component: 3200 - total flux cleaned = 0.00624486 Jy ! Component: 3250 - total flux cleaned = 0.00620515 Jy ! Component: 3300 - total flux cleaned = 0.00632364 Jy ! Component: 3350 - total flux cleaned = 0.00624492 Jy ! Component: 3400 - total flux cleaned = 0.00624481 Jy ! Component: 3450 - total flux cleaned = 0.00628386 Jy ! Component: 3500 - total flux cleaned = 0.00632278 Jy ! Component: 3550 - total flux cleaned = 0.00624515 Jy ! Component: 3600 - total flux cleaned = 0.00622586 Jy ! Component: 3650 - total flux cleaned = 0.00612945 Jy ! Component: 3700 - total flux cleaned = 0.00612951 Jy ! Component: 3750 - total flux cleaned = 0.0061104 Jy ! Component: 3800 - total flux cleaned = 0.00607208 Jy ! Component: 3850 - total flux cleaned = 0.0059578 Jy ! Component: 3900 - total flux cleaned = 0.00590083 Jy ! Component: 3950 - total flux cleaned = 0.00582506 Jy ! Component: 4000 - total flux cleaned = 0.00578728 Jy ! Component: 4050 - total flux cleaned = 0.00567423 Jy ! Total flux subtracted in 4096 components = 0.00569298 Jy ! Clean residual min=-0.001119 max=0.001082 Jy/beam ! Clean residual mean=0.000006 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.151239 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 399 components and 0.151239 Jy ![Exited script file: muppet] wmap "J1917-1921_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.409 x 9.312 at -7.528 degrees (North through East) ! Clean map min=-0.0019447 max=0.12762 Jy/beam ! Writing clean map to FITS file: J1917-1921_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000336259 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.790462 0.790462 1.58092 3.16185 6.3237 12.6474 25.2948 50.5896 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.409 x 9.312 at -7.528 degrees (North through East) ! Clean map min=-0.0019447 max=0.12762 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1917-1921_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:13:32 2019