! Started logfile: J1914-2947_S_2017_09_26_pus_uvs.log on Sat May 11 13:05:40 2019 obs J1914-2947_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1914-2947_S_2017_09_26_pus_uva.fits ! AN table 1: 176 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.855429 visibilities/baseline/integration-bin. ! Found source: J1914-2947 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 21680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1914-2947_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 328 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 283 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 933 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.867540Jy sigma=0.005625 ! Fit after self-cal, rms=0.827476Jy sigma=0.005374 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=12.84 mas, bpa=-18.99 degrees ! Estimated noise=1672.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123648 Jy ! Component: 100 - total flux cleaned = 0.16715 Jy ! Total flux subtracted in 100 components = 0.16715 Jy ! Clean residual min=-0.010007 max=0.020555 Jy/beam ! Clean residual mean=-0.000021 rms=0.003778 Jy/beam ! Combined flux in latest and established models = 0.16715 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.16715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127086Jy sigma=0.000790 ! Fit after self-cal, rms=0.127023Jy sigma=0.000790 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=15.5 mas, bpa=-17.91 degrees ! Estimated noise=925.401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398315 Jy ! Component: 100 - total flux cleaned = 0.0600059 Jy ! Component: 150 - total flux cleaned = 0.0716902 Jy ! Component: 200 - total flux cleaned = 0.078678 Jy ! Total flux subtracted in 200 components = 0.078678 Jy ! Clean residual min=-0.006706 max=0.008598 Jy/beam ! Clean residual mean=0.000006 rms=0.002198 Jy/beam ! Combined flux in latest and established models = 0.245828 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 78 components and 0.245828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115573Jy sigma=0.000696 ! Fit after self-cal, rms=0.115566Jy sigma=0.000696 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 0.90 HN 1.22 KP 1.05 ! LA 1.03 MK 1.05 NL 0.95 OV 1.01 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.17 KP 0.98 ! LA 0.97 MK 0.96 NL 1.12 OV 1.03 ! PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.10 KP 0.99 ! LA 0.95 MK 0.97 NL 1.06 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 267 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.99 KP 1.00* ! LA 1.00* MK 1.00 NL 1.00* OV 1.59 ! PT 0.94 ! ! ! Fit before self-cal, rms=0.115566Jy sigma=0.000696 ! Fit after self-cal, rms=0.126025Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=15.86 mas, bpa=-18.46 degrees ! Estimated noise=940.385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000172047 Jy ! Component: 100 - total flux cleaned = -0.000171703 Jy ! Component: 150 - total flux cleaned = -0.000122555 Jy ! Component: 200 - total flux cleaned = -0.000121118 Jy ! Total flux subtracted in 200 components = -0.000121118 Jy ! Clean residual min=-0.004916 max=0.006445 Jy/beam ! Clean residual mean=-0.000004 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.245707 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 88 components and 0.245707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125959Jy sigma=0.000680 ! Fit after self-cal, rms=0.126316Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126316Jy sigma=0.000679 ! Fit after self-cal, rms=0.132056Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=15.94 mas, bpa=-18.49 degrees ! Estimated noise=943.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121364 Jy ! Component: 100 - total flux cleaned = 3.88757e-05 Jy ! Component: 150 - total flux cleaned = -3.49947e-05 Jy ! Component: 200 - total flux cleaned = -0.00010123 Jy ! Total flux subtracted in 200 components = -0.00010123 Jy ! Clean residual min=-0.003216 max=0.006287 Jy/beam ! Clean residual mean=-0.000008 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.245606 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.245606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132021Jy sigma=0.000669 ! Fit after self-cal, rms=0.132155Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00594415 Jy ! Component: 100 - total flux cleaned = 0.0088541 Jy ! Component: 150 - total flux cleaned = 0.0103847 Jy ! Component: 200 - total flux cleaned = 0.0110982 Jy ! Total flux subtracted in 200 components = 0.0110982 Jy ! Clean residual min=-0.002528 max=0.003129 Jy/beam ! Clean residual mean=-0.000001 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.256704 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 149 components and 0.256704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131913Jy sigma=0.000667 ! Fit after self-cal, rms=0.131855Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131855Jy sigma=0.000666 ! Fit after self-cal, rms=0.132582Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=15.93 mas, bpa=-18.54 degrees ! Estimated noise=941.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232772 Jy ! Component: 100 - total flux cleaned = 0.00344271 Jy ! Component: 150 - total flux cleaned = 0.00392591 Jy ! Component: 200 - total flux cleaned = 0.00411882 Jy ! Total flux subtracted in 200 components = 0.00411882 Jy ! Clean residual min=-0.002275 max=0.002228 Jy/beam ! Clean residual mean=-0.000004 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.260823 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 163 components and 0.260823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132524Jy sigma=0.000666 ! Fit after self-cal, rms=0.132519Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000875848 Jy ! Component: 100 - total flux cleaned = 0.00105252 Jy ! Component: 150 - total flux cleaned = 0.00111774 Jy ! Component: 200 - total flux cleaned = 0.00120996 Jy ! Total flux subtracted in 200 components = 0.00120996 Jy ! Clean residual min=-0.002199 max=0.001980 Jy/beam ! Clean residual mean=-0.000003 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.262033 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 175 components and 0.262033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132495Jy sigma=0.000666 ! Fit after self-cal, rms=0.132493Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132493Jy sigma=0.000666 ! Fit after self-cal, rms=0.132854Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.755 mas, bmaj=27.87 mas, bpa=-5.678 degrees ! Estimated noise=1105.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135392 Jy ! Component: 100 - total flux cleaned = 0.00162212 Jy ! Component: 150 - total flux cleaned = 0.00167653 Jy ! Component: 200 - total flux cleaned = 0.00172486 Jy ! Total flux subtracted in 200 components = 0.00172486 Jy ! Clean residual min=-0.002301 max=0.001973 Jy/beam ! Clean residual mean=-0.000006 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.263758 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 206 components and 0.263758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132841Jy sigma=0.000665 ! Fit after self-cal, rms=0.132838Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378347 Jy ! Component: 100 - total flux cleaned = 0.000402317 Jy ! Component: 150 - total flux cleaned = 0.000380806 Jy ! Component: 200 - total flux cleaned = 0.000381191 Jy ! Total flux subtracted in 200 components = 0.000381191 Jy ! Clean residual min=-0.002270 max=0.001929 Jy/beam ! Clean residual mean=-0.000006 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.264139 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 214 components and 0.264139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132829Jy sigma=0.000665 ! Fit after self-cal, rms=0.132827Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=15.93 mas, bpa=-18.52 degrees ! Estimated noise=942.093 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 15.93 at -18.52 degrees (North through East) ! Clean map min=-0.0020352 max=0.17143 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=13.42 mas, bpa=-19.94 degrees ! Estimated noise=1763.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129527 Jy ! Component: 100 - total flux cleaned = 0.176648 Jy ! Component: 150 - total flux cleaned = 0.200563 Jy ! Component: 200 - total flux cleaned = 0.213836 Jy ! Total flux subtracted in 200 components = 0.213836 Jy ! Clean residual min=-0.004881 max=0.007095 Jy/beam ! Clean residual mean=-0.000014 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.213836 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.213836 Jy ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=15.93 mas, bpa=-18.52 degrees ! Estimated noise=942.093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134145 Jy ! Component: 100 - total flux cleaned = 0.02203 Jy ! Component: 150 - total flux cleaned = 0.028248 Jy ! Component: 200 - total flux cleaned = 0.0329628 Jy ! Total flux subtracted in 200 components = 0.0329628 Jy ! Clean residual min=-0.002728 max=0.003281 Jy/beam ! Clean residual mean=-0.000006 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.246799 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 110 components and 0.246799 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.755 mas, bmaj=27.87 mas, bpa=-5.678 degrees ! Estimated noise=1105.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534458 Jy ! Component: 100 - total flux cleaned = 0.00880537 Jy ! Component: 150 - total flux cleaned = 0.0111379 Jy ! Component: 200 - total flux cleaned = 0.0127398 Jy ! Total flux subtracted in 200 components = 0.0127398 Jy ! Clean residual min=-0.002532 max=0.001997 Jy/beam ! Clean residual mean=-0.000005 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.259538 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115547 Jy ! Component: 100 - total flux cleaned = 0.00200873 Jy ! Component: 150 - total flux cleaned = 0.00264795 Jy ! Component: 200 - total flux cleaned = 0.0030065 Jy ! Total flux subtracted in 200 components = 0.0030065 Jy ! Clean residual min=-0.002246 max=0.002024 Jy/beam ! Clean residual mean=-0.000004 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.262545 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 193 components and 0.262545 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=15.93 mas, bpa=-18.52 degrees ! Estimated noise=942.093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310379 Jy ! Component: 100 - total flux cleaned = 0.000410311 Jy ! Component: 150 - total flux cleaned = 0.000370688 Jy ! Component: 200 - total flux cleaned = 0.000403589 Jy ! Total flux subtracted in 200 components = 0.000403589 Jy ! Clean residual min=-0.001958 max=0.001936 Jy/beam ! Clean residual mean=-0.000003 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.262948 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 222 components and 0.262948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132848Jy sigma=0.000666 ! Fit after self-cal, rms=0.132810Jy sigma=0.000665 wmodel J1914-2947_S_2017_09_26_pus_map.mod ! Writing 222 model components to file: J1914-2947_S_2017_09_26_pus_map.mod wobs J1914-2947_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1914-2947_S_2017_09_26_pus_uvs.fits wwins J1914-2947_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J1914-2947_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761043 Jy ! Component: 100 - total flux cleaned = 0.00102356 Jy ! Component: 150 - total flux cleaned = 0.00117789 Jy ! Component: 200 - total flux cleaned = 0.0013548 Jy ! Component: 250 - total flux cleaned = 0.00146799 Jy ! Component: 300 - total flux cleaned = 0.00165947 Jy ! Component: 350 - total flux cleaned = 0.00179204 Jy ! Component: 400 - total flux cleaned = 0.00202422 Jy ! Component: 450 - total flux cleaned = 0.00217463 Jy ! Component: 500 - total flux cleaned = 0.00229724 Jy ! Component: 550 - total flux cleaned = 0.00236957 Jy ! Component: 600 - total flux cleaned = 0.00251095 Jy ! Component: 650 - total flux cleaned = 0.00260318 Jy ! Component: 700 - total flux cleaned = 0.00269412 Jy ! Component: 750 - total flux cleaned = 0.00285013 Jy ! Component: 800 - total flux cleaned = 0.0029594 Jy ! Component: 850 - total flux cleaned = 0.00304544 Jy ! Component: 900 - total flux cleaned = 0.00315116 Jy ! Component: 950 - total flux cleaned = 0.00323392 Jy ! Component: 1000 - total flux cleaned = 0.00327494 Jy ! Component: 1050 - total flux cleaned = 0.00333515 Jy ! Component: 1100 - total flux cleaned = 0.00339464 Jy ! Component: 1150 - total flux cleaned = 0.00343373 Jy ! Component: 1200 - total flux cleaned = 0.00356807 Jy ! Component: 1250 - total flux cleaned = 0.00358707 Jy ! Component: 1300 - total flux cleaned = 0.00369918 Jy ! Component: 1350 - total flux cleaned = 0.00368068 Jy ! Component: 1400 - total flux cleaned = 0.00375334 Jy ! Component: 1450 - total flux cleaned = 0.00377123 Jy ! Component: 1500 - total flux cleaned = 0.00378877 Jy ! Component: 1550 - total flux cleaned = 0.00380612 Jy ! Component: 1600 - total flux cleaned = 0.00384035 Jy ! Component: 1650 - total flux cleaned = 0.00384003 Jy ! Component: 1700 - total flux cleaned = 0.0038233 Jy ! Component: 1750 - total flux cleaned = 0.00380693 Jy ! Component: 1800 - total flux cleaned = 0.00382346 Jy ! Component: 1850 - total flux cleaned = 0.00385603 Jy ! Component: 1900 - total flux cleaned = 0.00383975 Jy ! Component: 1950 - total flux cleaned = 0.00385576 Jy ! Component: 2000 - total flux cleaned = 0.00388723 Jy ! Component: 2050 - total flux cleaned = 0.00382469 Jy ! Component: 2100 - total flux cleaned = 0.00385574 Jy ! Component: 2150 - total flux cleaned = 0.00387116 Jy ! Component: 2200 - total flux cleaned = 0.00385601 Jy ! Component: 2250 - total flux cleaned = 0.00394631 Jy ! Component: 2300 - total flux cleaned = 0.00391636 Jy ! Component: 2350 - total flux cleaned = 0.00396078 Jy ! Component: 2400 - total flux cleaned = 0.00397531 Jy ! Component: 2450 - total flux cleaned = 0.00396107 Jy ! Component: 2500 - total flux cleaned = 0.00400441 Jy ! Component: 2550 - total flux cleaned = 0.00401877 Jy ! Component: 2600 - total flux cleaned = 0.00407534 Jy ! Component: 2650 - total flux cleaned = 0.00406112 Jy ! Component: 2700 - total flux cleaned = 0.0040748 Jy ! Component: 2750 - total flux cleaned = 0.00403338 Jy ! Component: 2800 - total flux cleaned = 0.00401972 Jy ! Component: 2850 - total flux cleaned = 0.0040468 Jy ! Component: 2900 - total flux cleaned = 0.00404688 Jy ! Component: 2950 - total flux cleaned = 0.00404696 Jy ! Component: 3000 - total flux cleaned = 0.00406026 Jy ! Component: 3050 - total flux cleaned = 0.00404707 Jy ! Component: 3100 - total flux cleaned = 0.00403392 Jy ! Component: 3150 - total flux cleaned = 0.00400788 Jy ! Component: 3200 - total flux cleaned = 0.00396907 Jy ! Component: 3250 - total flux cleaned = 0.00393062 Jy ! Component: 3300 - total flux cleaned = 0.00387976 Jy ! Component: 3350 - total flux cleaned = 0.00386726 Jy ! Component: 3400 - total flux cleaned = 0.00381695 Jy ! Component: 3450 - total flux cleaned = 0.00379209 Jy ! Component: 3500 - total flux cleaned = 0.00375488 Jy ! Component: 3550 - total flux cleaned = 0.00375503 Jy ! Component: 3600 - total flux cleaned = 0.00374282 Jy ! Component: 3650 - total flux cleaned = 0.00373073 Jy ! Component: 3700 - total flux cleaned = 0.00367038 Jy ! Component: 3750 - total flux cleaned = 0.00364633 Jy ! Component: 3800 - total flux cleaned = 0.00364643 Jy ! Component: 3850 - total flux cleaned = 0.00362272 Jy ! Component: 3900 - total flux cleaned = 0.0035993 Jy ! Component: 3950 - total flux cleaned = 0.00358757 Jy ! Component: 4000 - total flux cleaned = 0.00359912 Jy ! Component: 4050 - total flux cleaned = 0.00355278 Jy ! Total flux subtracted in 4096 components = 0.00352982 Jy ! Clean residual min=-0.000664 max=0.000626 Jy/beam ! Clean residual mean=-0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.266478 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 508 components and 0.266478 Jy ![Exited script file: muppet] wmap "J1914-2947_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 15.93 at -18.52 degrees (North through East) ! Clean map min=-0.0015272 max=0.17734 Jy/beam ! Writing clean map to FITS file: J1914-2947_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.177338 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214388 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.362678 0.362678 0.725356 1.45071 2.90142 5.80285 11.6057 23.2114 46.4228 92.8455 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.177 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 15.93 at -18.52 degrees (North through East) ! Clean map min=-0.0015272 max=0.17734 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1914-2947_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:05:45 2019