! Started logfile: J1913-4503_S_2017_08_05_pus_uvs.log on Thu May 9 19:36:37 2019 obs J1913-4503_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1913-4503_S_2017_08_05_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.385965 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1913-4503 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 6600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1913-4503_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 347 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 387 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 513 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 686 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.762273Jy sigma=0.004561 ! Fit after self-cal, rms=0.712608Jy sigma=0.004287 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.389 mas, bmaj=8.084 mas, bpa=0.6196 degrees ! Estimated noise=3490.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228201 Jy ! Component: 100 - total flux cleaned = 0.279471 Jy ! Total flux subtracted in 100 components = 0.279471 Jy ! Clean residual min=-0.012843 max=0.018580 Jy/beam ! Clean residual mean=-0.000056 rms=0.003567 Jy/beam ! Combined flux in latest and established models = 0.279471 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.279471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113817Jy sigma=0.000662 ! Fit after self-cal, rms=0.113802Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.8 mas, bmaj=9.453 mas, bpa=-0.6805 degrees ! Estimated noise=1818.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204322 Jy ! Component: 100 - total flux cleaned = 0.0295352 Jy ! Component: 150 - total flux cleaned = 0.0339916 Jy ! Component: 200 - total flux cleaned = 0.0362101 Jy ! Total flux subtracted in 200 components = 0.0362101 Jy ! Clean residual min=-0.007023 max=0.007196 Jy/beam ! Clean residual mean=-0.000061 rms=0.001984 Jy/beam ! Combined flux in latest and established models = 0.315682 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.315682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110290Jy sigma=0.000643 ! Fit after self-cal, rms=0.110250Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.07 ! LA 1.02 MK 0.98 NL 1.00* OV 0.99 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.02 ! LA 0.97 MK 1.00 NL 1.00* OV 1.03 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.88 ! LA 1.00* MK 1.03 NL 1.00* OV 0.95 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.110250Jy sigma=0.000643 ! Fit after self-cal, rms=0.110470Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=9.255 mas, bpa=0.5238 degrees ! Estimated noise=1919.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837488 Jy ! Component: 100 - total flux cleaned = 0.000934934 Jy ! Component: 150 - total flux cleaned = 0.00105181 Jy ! Component: 200 - total flux cleaned = 0.00105158 Jy ! Total flux subtracted in 200 components = 0.00105158 Jy ! Clean residual min=-0.006745 max=0.007476 Jy/beam ! Clean residual mean=-0.000025 rms=0.001878 Jy/beam ! Combined flux in latest and established models = 0.316733 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.316733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110447Jy sigma=0.000642 ! Fit after self-cal, rms=0.110450Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110450Jy sigma=0.000642 ! Fit after self-cal, rms=0.109965Jy sigma=0.000638 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=9.252 mas, bpa=0.5092 degrees ! Estimated noise=1923.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000639055 Jy ! Component: 100 - total flux cleaned = 0.000684537 Jy ! Component: 150 - total flux cleaned = 0.000684891 Jy ! Component: 200 - total flux cleaned = 0.000705187 Jy ! Total flux subtracted in 200 components = 0.000705187 Jy ! Clean residual min=-0.005166 max=0.005154 Jy/beam ! Clean residual mean=-0.000010 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.317438 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.317438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109955Jy sigma=0.000638 ! Fit after self-cal, rms=0.109948Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.09714e-05 Jy ! Component: 100 - total flux cleaned = -2.18022e-06 Jy ! Component: 150 - total flux cleaned = -1.57621e-06 Jy ! Component: 200 - total flux cleaned = -1.83626e-06 Jy ! Total flux subtracted in 200 components = -1.83626e-06 Jy ! Clean residual min=-0.005222 max=0.005158 Jy/beam ! Clean residual mean=-0.000010 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.317436 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.317436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109942Jy sigma=0.000638 ! Fit after self-cal, rms=0.109942Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109942Jy sigma=0.000638 ! Fit after self-cal, rms=0.109773Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=9.242 mas, bpa=0.5189 degrees ! Estimated noise=1924.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168593 Jy ! Component: 100 - total flux cleaned = 0.000131132 Jy ! Component: 150 - total flux cleaned = 0.000130631 Jy ! Component: 200 - total flux cleaned = 0.000112744 Jy ! Total flux subtracted in 200 components = 0.000112744 Jy ! Clean residual min=-0.004615 max=0.004849 Jy/beam ! Clean residual mean=0.000005 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.317549 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.317549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109766Jy sigma=0.000636 ! Fit after self-cal, rms=0.109768Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.87756e-07 Jy ! Component: 100 - total flux cleaned = -1.72054e-05 Jy ! Component: 150 - total flux cleaned = -1.68052e-05 Jy ! Component: 200 - total flux cleaned = -3.2409e-05 Jy ! Total flux subtracted in 200 components = -3.2409e-05 Jy ! Clean residual min=-0.004644 max=0.004791 Jy/beam ! Clean residual mean=0.000005 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.317517 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.317517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109763Jy sigma=0.000636 ! Fit after self-cal, rms=0.109763Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109763Jy sigma=0.000636 ! Fit after self-cal, rms=0.109709Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.479 mas, bmaj=31.52 mas, bpa=4.671 degrees ! Estimated noise=2610.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239018 Jy ! Component: 100 - total flux cleaned = -0.000236834 Jy ! Component: 150 - total flux cleaned = -0.000234367 Jy ! Component: 200 - total flux cleaned = -0.000233257 Jy ! Total flux subtracted in 200 components = -0.000233257 Jy ! Clean residual min=-0.005467 max=0.004465 Jy/beam ! Clean residual mean=0.000008 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.317283 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 0.317283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109708Jy sigma=0.000636 ! Fit after self-cal, rms=0.109706Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117455 Jy ! Component: 100 - total flux cleaned = -0.000116445 Jy ! Component: 150 - total flux cleaned = -0.000114183 Jy ! Component: 200 - total flux cleaned = -0.000113106 Jy ! Total flux subtracted in 200 components = -0.000113106 Jy ! Clean residual min=-0.005444 max=0.004419 Jy/beam ! Clean residual mean=0.000007 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.31717 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 0.31717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109705Jy sigma=0.000636 ! Fit after self-cal, rms=0.109704Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=9.238 mas, bpa=0.532 degrees ! Estimated noise=1923.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.858 x 9.238 at 0.532 degrees (North through East) ! Clean map min=-0.0045379 max=0.28923 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=8.152 mas, bpa=2.541 degrees ! Estimated noise=3545.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229476 Jy ! Component: 100 - total flux cleaned = 0.281038 Jy ! Component: 150 - total flux cleaned = 0.299009 Jy ! Component: 200 - total flux cleaned = 0.307259 Jy ! Total flux subtracted in 200 components = 0.307259 Jy ! Clean residual min=-0.007639 max=0.007350 Jy/beam ! Clean residual mean=0.000002 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.307259 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.307259 Jy ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=9.238 mas, bpa=0.532 degrees ! Estimated noise=1923.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055277 Jy ! Component: 100 - total flux cleaned = 0.00797699 Jy ! Component: 150 - total flux cleaned = 0.00886711 Jy ! Component: 200 - total flux cleaned = 0.0090328 Jy ! Total flux subtracted in 200 components = 0.0090328 Jy ! Clean residual min=-0.004909 max=0.004698 Jy/beam ! Clean residual mean=0.000000 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.316291 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.316291 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.479 mas, bmaj=31.52 mas, bpa=4.671 degrees ! Estimated noise=2610.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174741 Jy ! Component: 100 - total flux cleaned = 0.000175808 Jy ! Component: 150 - total flux cleaned = 0.0001762 Jy ! Component: 200 - total flux cleaned = 0.000175993 Jy ! Total flux subtracted in 200 components = 0.000175993 Jy ! Clean residual min=-0.005297 max=0.004237 Jy/beam ! Clean residual mean=0.000001 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.316467 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.53958e-07 Jy ! Component: 100 - total flux cleaned = -2.07127e-06 Jy ! Component: 150 - total flux cleaned = -3.3372e-06 Jy ! Component: 200 - total flux cleaned = -4.60679e-06 Jy ! Total flux subtracted in 200 components = -4.60679e-06 Jy ! Clean residual min=-0.005299 max=0.004243 Jy/beam ! Clean residual mean=0.000001 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.316463 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.316463 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=9.238 mas, bpa=0.532 degrees ! Estimated noise=1923.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.95262e-05 Jy ! Component: 100 - total flux cleaned = 0.000101378 Jy ! Component: 150 - total flux cleaned = 0.000162328 Jy ! Component: 200 - total flux cleaned = 0.00019821 Jy ! Total flux subtracted in 200 components = 0.00019821 Jy ! Clean residual min=-0.004842 max=0.004733 Jy/beam ! Clean residual mean=0.000002 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.316661 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.316661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109701Jy sigma=0.000636 ! Fit after self-cal, rms=0.109701Jy sigma=0.000636 wmodel J1913-4503_S_2017_08_05_pus_map.mod ! Writing 51 model components to file: J1913-4503_S_2017_08_05_pus_map.mod wobs J1913-4503_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1913-4503_S_2017_08_05_pus_uvs.fits wwins J1913-4503_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J1913-4503_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248909 Jy ! Component: 100 - total flux cleaned = 0.000709918 Jy ! Component: 150 - total flux cleaned = 0.00105793 Jy ! Component: 200 - total flux cleaned = 0.00143067 Jy ! Component: 250 - total flux cleaned = 0.00142777 Jy ! Component: 300 - total flux cleaned = 0.00153507 Jy ! Component: 350 - total flux cleaned = 0.00168626 Jy ! Component: 400 - total flux cleaned = 0.00182877 Jy ! Component: 450 - total flux cleaned = 0.00187467 Jy ! Component: 500 - total flux cleaned = 0.00187585 Jy ! Component: 550 - total flux cleaned = 0.00191794 Jy ! Component: 600 - total flux cleaned = 0.00195648 Jy ! Component: 650 - total flux cleaned = 0.00199353 Jy ! Component: 700 - total flux cleaned = 0.00213745 Jy ! Component: 750 - total flux cleaned = 0.0021728 Jy ! Component: 800 - total flux cleaned = 0.0024088 Jy ! Component: 850 - total flux cleaned = 0.00250592 Jy ! Component: 900 - total flux cleaned = 0.00269496 Jy ! Component: 950 - total flux cleaned = 0.00275644 Jy ! Component: 1000 - total flux cleaned = 0.00284653 Jy ! Component: 1050 - total flux cleaned = 0.0028753 Jy ! Component: 1100 - total flux cleaned = 0.00287498 Jy ! Component: 1150 - total flux cleaned = 0.00287408 Jy ! Component: 1200 - total flux cleaned = 0.00281985 Jy ! Component: 1250 - total flux cleaned = 0.00284625 Jy ! Component: 1300 - total flux cleaned = 0.00279433 Jy ! Component: 1350 - total flux cleaned = 0.00276932 Jy ! Component: 1400 - total flux cleaned = 0.00281929 Jy ! Component: 1450 - total flux cleaned = 0.00284407 Jy ! Component: 1500 - total flux cleaned = 0.00289249 Jy ! Component: 1550 - total flux cleaned = 0.00289263 Jy ! Component: 1600 - total flux cleaned = 0.00291623 Jy ! Component: 1650 - total flux cleaned = 0.00289331 Jy ! Component: 1700 - total flux cleaned = 0.00287068 Jy ! Component: 1750 - total flux cleaned = 0.00284841 Jy ! Component: 1800 - total flux cleaned = 0.00278244 Jy ! Component: 1850 - total flux cleaned = 0.00273913 Jy ! Component: 1900 - total flux cleaned = 0.00271746 Jy ! Component: 1950 - total flux cleaned = 0.00269612 Jy ! Component: 2000 - total flux cleaned = 0.00267498 Jy ! Component: 2050 - total flux cleaned = 0.00267509 Jy ! Component: 2100 - total flux cleaned = 0.00271656 Jy ! Component: 2150 - total flux cleaned = 0.00275749 Jy ! Component: 2200 - total flux cleaned = 0.00277773 Jy ! Component: 2250 - total flux cleaned = 0.00281803 Jy ! Component: 2300 - total flux cleaned = 0.00283798 Jy ! Component: 2350 - total flux cleaned = 0.00283789 Jy ! Component: 2400 - total flux cleaned = 0.00287716 Jy ! Component: 2450 - total flux cleaned = 0.0028576 Jy ! Component: 2500 - total flux cleaned = 0.00291578 Jy ! Component: 2550 - total flux cleaned = 0.00295435 Jy ! Component: 2600 - total flux cleaned = 0.0029736 Jy ! Component: 2650 - total flux cleaned = 0.00299279 Jy ! Component: 2700 - total flux cleaned = 0.00303111 Jy ! Component: 2750 - total flux cleaned = 0.00305026 Jy ! Component: 2800 - total flux cleaned = 0.00305027 Jy ! Component: 2850 - total flux cleaned = 0.00305013 Jy ! Component: 2900 - total flux cleaned = 0.00305011 Jy ! Component: 2950 - total flux cleaned = 0.00306916 Jy ! Component: 3000 - total flux cleaned = 0.00305014 Jy ! Component: 3050 - total flux cleaned = 0.00305 Jy ! Component: 3100 - total flux cleaned = 0.00306912 Jy ! Component: 3150 - total flux cleaned = 0.00310753 Jy ! Component: 3200 - total flux cleaned = 0.00312665 Jy ! Component: 3250 - total flux cleaned = 0.00314583 Jy ! Component: 3300 - total flux cleaned = 0.00316503 Jy ! Component: 3350 - total flux cleaned = 0.00316497 Jy ! Component: 3400 - total flux cleaned = 0.00314545 Jy ! Component: 3450 - total flux cleaned = 0.00314551 Jy ! Component: 3500 - total flux cleaned = 0.00312607 Jy ! Component: 3550 - total flux cleaned = 0.0030868 Jy ! Component: 3600 - total flux cleaned = 0.00310602 Jy ! Component: 3650 - total flux cleaned = 0.00308632 Jy ! Component: 3700 - total flux cleaned = 0.00310592 Jy ! Component: 3750 - total flux cleaned = 0.0031058 Jy ! Component: 3800 - total flux cleaned = 0.00304598 Jy ! Component: 3850 - total flux cleaned = 0.00306595 Jy ! Component: 3900 - total flux cleaned = 0.00304564 Jy ! Component: 3950 - total flux cleaned = 0.00302533 Jy ! Component: 4000 - total flux cleaned = 0.00302548 Jy ! Component: 4050 - total flux cleaned = 0.00298437 Jy ! Total flux subtracted in 4096 components = 0.00296367 Jy ! Clean residual min=-0.001211 max=0.001319 Jy/beam ! Clean residual mean=0.000007 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.319625 Jy keep ! Adding 226 model components to the UV plane model. ! The established model now contains 277 components and 0.319625 Jy ![Exited script file: muppet] wmap "J1913-4503_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.858 x 9.238 at 0.532 degrees (North through East) ! Clean map min=-0.002509 max=0.29142 Jy/beam ! Writing clean map to FITS file: J1913-4503_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.291425 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000362541 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.373209 0.373209 0.746417 1.49283 2.98567 5.97134 11.9427 23.8854 47.7707 95.5414 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.291 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.858 x 9.238 at 0.532 degrees (North through East) ! Clean map min=-0.002509 max=0.29142 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1913-4503_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:36:42 2019