! Started logfile: J1912-1504_S_2017_05_27_pus_uvs.log on Fri May 3 11:13:23 2019 obs J1912-1504_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1912-1504_S_2017_05_27_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95798 visibilities/baseline/integration-bin. ! Found source: J1912-1504 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 9484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1912-1504_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 289 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.762835Jy sigma=0.050352 ! Fit after self-cal, rms=0.739340Jy sigma=0.050304 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=6.563 mas, bpa=6.174 degrees ! Estimated noise=593.138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0772327 Jy ! Component: 100 - total flux cleaned = 0.110875 Jy ! Total flux subtracted in 100 components = 0.110875 Jy ! Clean residual min=-0.023666 max=0.051216 Jy/beam ! Clean residual mean=0.000013 rms=0.008715 Jy/beam ! Combined flux in latest and established models = 0.110875 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.110875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340241Jy sigma=0.004121 ! Fit after self-cal, rms=0.339860Jy sigma=0.004120 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.621 mas, bmaj=7.337 mas, bpa=5.323 degrees ! Estimated noise=423.956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503837 Jy ! Component: 100 - total flux cleaned = 0.0809248 Jy ! Component: 150 - total flux cleaned = 0.105342 Jy ! Component: 200 - total flux cleaned = 0.12518 Jy ! Total flux subtracted in 200 components = 0.12518 Jy ! Clean residual min=-0.028878 max=0.051312 Jy/beam ! Clean residual mean=0.000024 rms=0.008288 Jy/beam ! Combined flux in latest and established models = 0.236055 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 0.236055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312933Jy sigma=0.003933 ! Fit after self-cal, rms=0.311733Jy sigma=0.003904 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.40 FD 0.64 HN 0.76 KP 0.82 ! LA 0.79 MK 0.92 NL 0.72 OV 0.72 ! PT 0.85 SC 0.54 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 18.54 FD 0.67 HN 0.86 KP 0.81 ! LA 0.77 MK 0.99 NL 0.84 OV 0.75 ! PT 0.82 SC 0.59 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 11.56 FD 0.71 HN 0.81 KP 0.83 ! LA 0.79 MK 1.03 NL 0.83 OV 0.75 ! PT 0.82 SC 0.55 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.71 HN 0.95 KP 1.00* ! LA 0.23 MK 1.14 NL 1.00* OV 1.00* ! PT 0.82 SC 1.00* ! ! ! Fit before self-cal, rms=0.311733Jy sigma=0.003904 ! Fit after self-cal, rms=1.034483Jy sigma=0.001040 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=7.827 mas, bpa=2.713 degrees ! Estimated noise=657.726 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00605463 Jy ! Component: 100 - total flux cleaned = -0.00732867 Jy ! Component: 150 - total flux cleaned = -0.00735936 Jy ! Component: 200 - total flux cleaned = -0.00804721 Jy ! Total flux subtracted in 200 components = -0.00804721 Jy ! Clean residual min=-0.008709 max=0.008798 Jy/beam ! Clean residual mean=-0.000028 rms=0.002200 Jy/beam ! Combined flux in latest and established models = 0.228008 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 54 components and 0.228008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.028586Jy sigma=0.000970 ! Fit after self-cal, rms=1.027574Jy sigma=0.000863 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.027574Jy sigma=0.000863 ! Fit after self-cal, rms=0.909452Jy sigma=0.000834 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=7.753 mas, bpa=1.78 degrees ! Estimated noise=661.672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000530269 Jy ! Component: 100 - total flux cleaned = 0.000137293 Jy ! Component: 150 - total flux cleaned = 0.000139231 Jy ! Component: 200 - total flux cleaned = -0.000764705 Jy ! Total flux subtracted in 200 components = -0.000764705 Jy ! Clean residual min=-0.007921 max=0.006944 Jy/beam ! Clean residual mean=-0.000025 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.227243 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 0.227243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.906326Jy sigma=0.000808 ! Fit after self-cal, rms=0.906277Jy sigma=0.000806 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137849 Jy ! Component: 100 - total flux cleaned = -0.00215717 Jy ! Component: 150 - total flux cleaned = -0.00261449 Jy ! Component: 200 - total flux cleaned = -0.0032297 Jy ! Total flux subtracted in 200 components = -0.0032297 Jy ! Clean residual min=-0.006856 max=0.006257 Jy/beam ! Clean residual mean=-0.000023 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 0.224013 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.224014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.904449Jy sigma=0.000798 ! Fit after self-cal, rms=0.904424Jy sigma=0.000796 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.904424Jy sigma=0.000796 ! Fit after self-cal, rms=1.043269Jy sigma=0.000788 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=7.761 mas, bpa=1.212 degrees ! Estimated noise=680.146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179306 Jy ! Component: 100 - total flux cleaned = 0.00155741 Jy ! Component: 150 - total flux cleaned = 0.00110018 Jy ! Component: 200 - total flux cleaned = 0.000693887 Jy ! Total flux subtracted in 200 components = 0.000693887 Jy ! Clean residual min=-0.007107 max=0.005743 Jy/beam ! Clean residual mean=-0.000022 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 0.224707 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 0.224707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.041050Jy sigma=0.000783 ! Fit after self-cal, rms=1.041028Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146721 Jy ! Component: 100 - total flux cleaned = -0.00163782 Jy ! Component: 150 - total flux cleaned = -0.00180232 Jy ! Component: 200 - total flux cleaned = -0.00210948 Jy ! Total flux subtracted in 200 components = -0.00210948 Jy ! Clean residual min=-0.006384 max=0.005647 Jy/beam ! Clean residual mean=-0.000020 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.222598 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 0.222598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.039764Jy sigma=0.000781 ! Fit after self-cal, rms=1.039754Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.039754Jy sigma=0.000781 ! Fit after self-cal, rms=1.186872Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.568 mas, bmaj=15.45 mas, bpa=2.505 degrees ! Estimated noise=904.792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326618 Jy ! Component: 100 - total flux cleaned = 0.00353746 Jy ! Component: 150 - total flux cleaned = 0.00307688 Jy ! Component: 200 - total flux cleaned = 0.00244641 Jy ! Total flux subtracted in 200 components = 0.00244641 Jy ! Clean residual min=-0.009449 max=0.008018 Jy/beam ! Clean residual mean=-0.000030 rms=0.002560 Jy/beam ! Combined flux in latest and established models = 0.225044 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 97 components and 0.225044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.184672Jy sigma=0.000781 ! Fit after self-cal, rms=1.184666Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107697 Jy ! Component: 100 - total flux cleaned = -0.00161418 Jy ! Component: 150 - total flux cleaned = -0.00209826 Jy ! Component: 200 - total flux cleaned = -0.00254054 Jy ! Total flux subtracted in 200 components = -0.00254054 Jy ! Clean residual min=-0.008170 max=0.007985 Jy/beam ! Clean residual mean=-0.000029 rms=0.002416 Jy/beam ! Combined flux in latest and established models = 0.222504 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 0.222504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.183611Jy sigma=0.000785 ! Fit after self-cal, rms=1.183610Jy sigma=0.000785 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.758 mas, bpa=0.7266 degrees ! Estimated noise=698.392 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 7.758 at 0.7266 degrees (North through East) ! Clean map min=-0.010323 max=0.15356 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.662 mas, bmaj=6.661 mas, bpa=-1.01 degrees ! Estimated noise=971.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12629 Jy ! Component: 100 - total flux cleaned = 0.162046 Jy ! Component: 150 - total flux cleaned = 0.180956 Jy ! Component: 200 - total flux cleaned = 0.193035 Jy ! Total flux subtracted in 200 components = 0.193035 Jy ! Clean residual min=-0.006328 max=0.008074 Jy/beam ! Clean residual mean=-0.000015 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.193034 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.193034 Jy ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.758 mas, bpa=0.7266 degrees ! Estimated noise=698.392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134059 Jy ! Component: 100 - total flux cleaned = 0.019018 Jy ! Component: 150 - total flux cleaned = 0.0203532 Jy ! Component: 200 - total flux cleaned = 0.0214731 Jy ! Total flux subtracted in 200 components = 0.0214731 Jy ! Clean residual min=-0.006777 max=0.006822 Jy/beam ! Clean residual mean=-0.000020 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.214508 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 84 components and 0.214508 Jy ! Inverting map ! Added new window around map position (36, -58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437709 Jy ! Component: 100 - total flux cleaned = 0.00375541 Jy ! Component: 150 - total flux cleaned = 0.00357716 Jy ! Component: 200 - total flux cleaned = 0.00341512 Jy ! Total flux subtracted in 200 components = 0.00341512 Jy ! Clean residual min=-0.005639 max=0.005085 Jy/beam ! Clean residual mean=-0.000016 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.217923 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 124 components and 0.217923 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.568 mas, bmaj=15.45 mas, bpa=2.505 degrees ! Estimated noise=904.792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664185 Jy ! Component: 100 - total flux cleaned = 0.000201283 Jy ! Component: 150 - total flux cleaned = -0.000407287 Jy ! Component: 200 - total flux cleaned = -0.000955647 Jy ! Total flux subtracted in 200 components = -0.000955647 Jy ! Clean residual min=-0.006889 max=0.007782 Jy/beam ! Clean residual mean=-0.000026 rms=0.002004 Jy/beam ! Combined flux in latest and established models = 0.216967 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000508103 Jy ! Component: 100 - total flux cleaned = -0.00097697 Jy ! Component: 150 - total flux cleaned = -0.00141528 Jy ! Component: 200 - total flux cleaned = -0.00195139 Jy ! Total flux subtracted in 200 components = -0.00195139 Jy ! Clean residual min=-0.006470 max=0.007676 Jy/beam ! Clean residual mean=-0.000025 rms=0.001932 Jy/beam ! Combined flux in latest and established models = 0.215016 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 173 components and 0.215016 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.758 mas, bpa=0.7266 degrees ! Estimated noise=698.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.60998e-05 Jy ! Component: 100 - total flux cleaned = -0.000779892 Jy ! Component: 150 - total flux cleaned = -0.00102081 Jy ! Component: 200 - total flux cleaned = -0.0010228 Jy ! Total flux subtracted in 200 components = -0.0010228 Jy ! Clean residual min=-0.005260 max=0.004892 Jy/beam ! Clean residual mean=-0.000014 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.213993 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 191 components and 0.213993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.178090Jy sigma=0.000789 ! Fit after self-cal, rms=1.178056Jy sigma=0.000786 wmodel J1912-1504_S_2017_05_27_pus_map.mod ! Writing 191 model components to file: J1912-1504_S_2017_05_27_pus_map.mod wobs J1912-1504_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1912-1504_S_2017_05_27_pus_uvs.fits wwins J1912-1504_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J1912-1504_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102955 Jy ! Component: 100 - total flux cleaned = -0.00149572 Jy ! Component: 150 - total flux cleaned = -0.00164057 Jy ! Component: 200 - total flux cleaned = -0.00192025 Jy ! Component: 250 - total flux cleaned = -0.00225986 Jy ! Component: 300 - total flux cleaned = -0.0026574 Jy ! Component: 350 - total flux cleaned = -0.00311005 Jy ! Component: 400 - total flux cleaned = -0.00349011 Jy ! Component: 450 - total flux cleaned = -0.00386282 Jy ! Component: 500 - total flux cleaned = -0.00416751 Jy ! Component: 550 - total flux cleaned = -0.00446628 Jy ! Component: 600 - total flux cleaned = -0.00470009 Jy ! Component: 650 - total flux cleaned = -0.00487267 Jy ! Component: 700 - total flux cleaned = -0.00498678 Jy ! Component: 750 - total flux cleaned = -0.00521145 Jy ! Component: 800 - total flux cleaned = -0.00532187 Jy ! Component: 850 - total flux cleaned = -0.0054309 Jy ! Component: 900 - total flux cleaned = -0.00553813 Jy ! Component: 950 - total flux cleaned = -0.00543188 Jy ! Component: 1000 - total flux cleaned = -0.00553628 Jy ! Component: 1050 - total flux cleaned = -0.00558821 Jy ! Component: 1100 - total flux cleaned = -0.0057921 Jy ! Component: 1150 - total flux cleaned = -0.00574198 Jy ! Component: 1200 - total flux cleaned = -0.00589159 Jy ! Component: 1250 - total flux cleaned = -0.00599018 Jy ! Component: 1300 - total flux cleaned = -0.00623376 Jy ! Component: 1350 - total flux cleaned = -0.00633051 Jy ! Component: 1400 - total flux cleaned = -0.00647429 Jy ! Component: 1450 - total flux cleaned = -0.0066165 Jy ! Component: 1500 - total flux cleaned = -0.00680436 Jy ! Component: 1550 - total flux cleaned = -0.00703675 Jy ! Component: 1600 - total flux cleaned = -0.00712899 Jy ! Component: 1650 - total flux cleaned = -0.00731197 Jy ! Component: 1700 - total flux cleaned = -0.00753866 Jy ! Component: 1750 - total flux cleaned = -0.00762853 Jy ! Component: 1800 - total flux cleaned = -0.00771776 Jy ! Component: 1850 - total flux cleaned = -0.00793938 Jy ! Component: 1900 - total flux cleaned = -0.00811539 Jy ! Component: 1950 - total flux cleaned = -0.00829022 Jy ! Component: 2000 - total flux cleaned = -0.00842046 Jy ! Component: 2050 - total flux cleaned = -0.00872215 Jy ! Component: 2100 - total flux cleaned = -0.00885044 Jy ! Component: 2150 - total flux cleaned = -0.00906305 Jy ! Component: 2200 - total flux cleaned = -0.00918953 Jy ! Component: 2250 - total flux cleaned = -0.0093991 Jy ! Component: 2300 - total flux cleaned = -0.0095239 Jy ! Component: 2350 - total flux cleaned = -0.00964805 Jy ! Component: 2400 - total flux cleaned = -0.00985374 Jy ! Component: 2450 - total flux cleaned = -0.00997638 Jy ! Component: 2500 - total flux cleaned = -0.0101798 Jy ! Component: 2550 - total flux cleaned = -0.0103414 Jy ! Component: 2600 - total flux cleaned = -0.010542 Jy ! Component: 2650 - total flux cleaned = -0.0107018 Jy ! Component: 2700 - total flux cleaned = -0.0107813 Jy ! Component: 2750 - total flux cleaned = -0.0109394 Jy ! Component: 2800 - total flux cleaned = -0.0111749 Jy ! Component: 2850 - total flux cleaned = -0.0112921 Jy ! Component: 2900 - total flux cleaned = -0.0114476 Jy ! Component: 2950 - total flux cleaned = -0.0115634 Jy ! Component: 3000 - total flux cleaned = -0.0117173 Jy ! Component: 3050 - total flux cleaned = -0.0118321 Jy ! Component: 3100 - total flux cleaned = -0.0120226 Jy ! Component: 3150 - total flux cleaned = -0.0120984 Jy ! Component: 3200 - total flux cleaned = -0.0122491 Jy ! Component: 3250 - total flux cleaned = -0.0124746 Jy ! Component: 3300 - total flux cleaned = -0.0125121 Jy ! Component: 3350 - total flux cleaned = -0.0126982 Jy ! Component: 3400 - total flux cleaned = -0.0127723 Jy ! Component: 3450 - total flux cleaned = -0.0129201 Jy ! Component: 3500 - total flux cleaned = -0.0130671 Jy ! Component: 3550 - total flux cleaned = -0.0131403 Jy ! Component: 3600 - total flux cleaned = -0.0132861 Jy ! Component: 3650 - total flux cleaned = -0.0133951 Jy ! Component: 3700 - total flux cleaned = -0.0136122 Jy ! Component: 3750 - total flux cleaned = -0.0136843 Jy ! Component: 3800 - total flux cleaned = -0.0138279 Jy ! Component: 3850 - total flux cleaned = -0.0139712 Jy ! Component: 3900 - total flux cleaned = -0.0141135 Jy ! Component: 3950 - total flux cleaned = -0.0141844 Jy ! Component: 4000 - total flux cleaned = -0.0142905 Jy ! Component: 4050 - total flux cleaned = -0.0145019 Jy ! Total flux subtracted in 4096 components = -0.014572 Jy ! Clean residual min=-0.001930 max=0.002077 Jy/beam ! Clean residual mean=-0.000012 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.199421 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 470 components and 0.199421 Jy ![Exited script file: muppet] wmap "J1912-1504_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 7.758 at 0.7266 degrees (North through East) ! Clean map min=-0.0080696 max=0.16399 Jy/beam ! Writing clean map to FITS file: J1912-1504_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.163986 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000658631 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.20491 1.20491 2.40983 4.81966 9.63931 19.2786 38.5572 77.1145 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.163 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 7.758 at 0.7266 degrees (North through East) ! Clean map min=-0.0080696 max=0.16399 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1912-1504_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:13:27 2019