! Started logfile: J1911-2006_S_2017_10_09_pus_uvs.log on Sun May 12 13:18:53 2019 obs J1911-2006_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1911-2006_S_2017_10_09_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.633547 visibilities/baseline/integration-bin. ! Found source: J1911-2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1911-2006_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.567669Jy sigma=0.004124 ! Fit after self-cal, rms=0.529392Jy sigma=0.003851 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=15.37 mas, bpa=-14.28 degrees ! Estimated noise=2655.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.927916 Jy ! Component: 100 - total flux cleaned = 1.22785 Jy ! Total flux subtracted in 100 components = 1.22785 Jy ! Clean residual min=-0.074499 max=0.142885 Jy/beam ! Clean residual mean=-0.001242 rms=0.026607 Jy/beam ! Combined flux in latest and established models = 1.22785 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 1.22785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396257Jy sigma=0.002830 ! Fit after self-cal, rms=0.396090Jy sigma=0.002830 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.543 mas, bmaj=17.87 mas, bpa=-14.12 degrees ! Estimated noise=2324.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.21497 Jy ! Component: 100 - total flux cleaned = 0.338583 Jy ! Component: 150 - total flux cleaned = 0.418085 Jy ! Component: 200 - total flux cleaned = 0.472033 Jy ! Total flux subtracted in 200 components = 0.472033 Jy ! Clean residual min=-0.047151 max=0.068434 Jy/beam ! Clean residual mean=-0.000455 rms=0.014440 Jy/beam ! Combined flux in latest and established models = 1.69989 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 93 components and 1.69989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238670Jy sigma=0.001623 ! Fit after self-cal, rms=0.237774Jy sigma=0.001618 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.90 HN 0.99 KP 1.08 ! LA 1.00 MK 1.04 NL 0.95 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.06 KP 1.04 ! LA 0.96 MK 1.03 NL 1.09 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 1.03 KP 0.90 ! LA 0.75 MK 1.03 NL 1.27 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.05 KP 1.00* ! LA 1.00* MK 0.98 NL 1.00* OV 1.00* ! PT 0.92 ! ! ! Fit before self-cal, rms=0.237774Jy sigma=0.001618 ! Fit after self-cal, rms=0.137128Jy sigma=0.000935 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=18.46 mas, bpa=-14.15 degrees ! Estimated noise=2338.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0141084 Jy ! Component: 100 - total flux cleaned = -0.0158377 Jy ! Component: 150 - total flux cleaned = -0.017213 Jy ! Component: 200 - total flux cleaned = -0.0183524 Jy ! Total flux subtracted in 200 components = -0.0183524 Jy ! Clean residual min=-0.028338 max=0.029369 Jy/beam ! Clean residual mean=0.000026 rms=0.006624 Jy/beam ! Combined flux in latest and established models = 1.68153 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 113 components and 1.68153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134397Jy sigma=0.000919 ! Fit after self-cal, rms=0.133974Jy sigma=0.000916 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133974Jy sigma=0.000916 ! Fit after self-cal, rms=0.129135Jy sigma=0.000864 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=18.64 mas, bpa=-14.34 degrees ! Estimated noise=2346.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00744277 Jy ! Component: 100 - total flux cleaned = -0.00889644 Jy ! Component: 150 - total flux cleaned = -0.0104493 Jy ! Component: 200 - total flux cleaned = -0.0112885 Jy ! Total flux subtracted in 200 components = -0.0112885 Jy ! Clean residual min=-0.026204 max=0.025689 Jy/beam ! Clean residual mean=0.000038 rms=0.005648 Jy/beam ! Combined flux in latest and established models = 1.67025 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 133 components and 1.67025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127118Jy sigma=0.000852 ! Fit after self-cal, rms=0.126891Jy sigma=0.000851 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000890766 Jy ! Component: 100 - total flux cleaned = -0.00164393 Jy ! Component: 150 - total flux cleaned = -0.00232602 Jy ! Component: 200 - total flux cleaned = -0.00253233 Jy ! Total flux subtracted in 200 components = -0.00253233 Jy ! Clean residual min=-0.025464 max=0.025132 Jy/beam ! Clean residual mean=0.000032 rms=0.005531 Jy/beam ! Combined flux in latest and established models = 1.66771 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 150 components and 1.66771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125873Jy sigma=0.000845 ! Fit after self-cal, rms=0.125632Jy sigma=0.000845 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125632Jy sigma=0.000845 ! Fit after self-cal, rms=0.126755Jy sigma=0.000841 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=18.77 mas, bpa=-14.39 degrees ! Estimated noise=2349.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00600378 Jy ! Component: 100 - total flux cleaned = -0.00780936 Jy ! Component: 150 - total flux cleaned = -0.00913919 Jy ! Component: 200 - total flux cleaned = -0.00963094 Jy ! Total flux subtracted in 200 components = -0.00963094 Jy ! Clean residual min=-0.024266 max=0.024591 Jy/beam ! Clean residual mean=0.000039 rms=0.005286 Jy/beam ! Combined flux in latest and established models = 1.65808 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 158 components and 1.65808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125242Jy sigma=0.000833 ! Fit after self-cal, rms=0.125131Jy sigma=0.000833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (75.5, -80). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149365 Jy ! Component: 100 - total flux cleaned = 0.0149217 Jy ! Component: 150 - total flux cleaned = 0.0149463 Jy ! Component: 200 - total flux cleaned = 0.0161161 Jy ! Total flux subtracted in 200 components = 0.0161161 Jy ! Clean residual min=-0.019763 max=0.015481 Jy/beam ! Clean residual mean=0.000029 rms=0.004237 Jy/beam ! Combined flux in latest and established models = 1.6742 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 187 components and 1.6742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118668Jy sigma=0.000791 ! Fit after self-cal, rms=0.118169Jy sigma=0.000788 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118169Jy sigma=0.000788 ! Fit after self-cal, rms=0.117997Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.505 mas, bmaj=21.88 mas, bpa=-8.597 degrees ! Estimated noise=2698.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720321 Jy ! Component: 100 - total flux cleaned = 0.00635333 Jy ! Component: 150 - total flux cleaned = 0.00465611 Jy ! Component: 200 - total flux cleaned = 0.00360411 Jy ! Total flux subtracted in 200 components = 0.00360411 Jy ! Clean residual min=-0.016212 max=0.011867 Jy/beam ! Clean residual mean=0.000056 rms=0.004018 Jy/beam ! Combined flux in latest and established models = 1.6778 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 216 components and 1.6778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116646Jy sigma=0.000778 ! Fit after self-cal, rms=0.116526Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000611257 Jy ! Component: 100 - total flux cleaned = -0.00034182 Jy ! Component: 150 - total flux cleaned = -0.000880403 Jy ! Component: 200 - total flux cleaned = -0.00172666 Jy ! Total flux subtracted in 200 components = -0.00172666 Jy ! Clean residual min=-0.015670 max=0.011821 Jy/beam ! Clean residual mean=0.000043 rms=0.003917 Jy/beam ! Combined flux in latest and established models = 1.67608 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 230 components and 1.67608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116012Jy sigma=0.000773 ! Fit after self-cal, rms=0.115940Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=18.83 mas, bpa=-14.41 degrees ! Estimated noise=2346.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.601 x 18.83 at -14.41 degrees (North through East) ! Clean map min=-0.019509 max=1.2196 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115940Jy sigma=0.000773 ! Fit after self-cal, rms=0.103881Jy sigma=0.000675 ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=18.84 mas, bpa=-14.4 degrees ! Estimated noise=2342.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00334163 Jy ! Component: 100 - total flux cleaned = -0.00435044 Jy ! Component: 150 - total flux cleaned = -0.00527129 Jy ! Component: 200 - total flux cleaned = -0.00570457 Jy ! Total flux subtracted in 200 components = -0.00570457 Jy ! Clean residual min=-0.016151 max=0.013328 Jy/beam ! Clean residual mean=0.000003 rms=0.003564 Jy/beam ! Combined flux in latest and established models = 1.67037 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 239 components and 1.67037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102576Jy sigma=0.000668 ! Fit after self-cal, rms=0.102530Jy sigma=0.000668 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108477 Jy ! Component: 100 - total flux cleaned = -0.00108961 Jy ! Component: 150 - total flux cleaned = -0.00126037 Jy ! Component: 200 - total flux cleaned = -0.00125875 Jy ! Total flux subtracted in 200 components = -0.00125875 Jy ! Clean residual min=-0.015573 max=0.012609 Jy/beam ! Clean residual mean=-0.000001 rms=0.003493 Jy/beam ! Combined flux in latest and established models = 1.66911 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 259 components and 1.66911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101780Jy sigma=0.000664 ! Fit after self-cal, rms=0.101745Jy sigma=0.000663 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101745Jy sigma=0.000663 ! Fit after self-cal, rms=0.102128Jy sigma=0.000662 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=16.09 mas, bpa=-14.68 degrees ! Estimated noise=2709.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.936083 Jy ! Component: 100 - total flux cleaned = 1.22055 Jy ! Component: 150 - total flux cleaned = 1.3692 Jy ! Component: 200 - total flux cleaned = 1.45821 Jy ! Total flux subtracted in 200 components = 1.45821 Jy ! Clean residual min=-0.029686 max=0.058770 Jy/beam ! Clean residual mean=-0.000356 rms=0.010314 Jy/beam ! Combined flux in latest and established models = 1.45822 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 1.45822 Jy ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=18.88 mas, bpa=-14.43 degrees ! Estimated noise=2342.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0783734 Jy ! Component: 100 - total flux cleaned = 0.12364 Jy ! Component: 150 - total flux cleaned = 0.15373 Jy ! Component: 200 - total flux cleaned = 0.175607 Jy ! Total flux subtracted in 200 components = 0.175607 Jy ! Clean residual min=-0.019645 max=0.018022 Jy/beam ! Clean residual mean=-0.000068 rms=0.004893 Jy/beam ! Combined flux in latest and established models = 1.63382 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 109 components and 1.63382 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.51 mas, bmaj=21.94 mas, bpa=-8.686 degrees ! Estimated noise=2693.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213496 Jy ! Component: 100 - total flux cleaned = 0.0269563 Jy ! Component: 150 - total flux cleaned = 0.0305289 Jy ! Component: 200 - total flux cleaned = 0.0339998 Jy ! Total flux subtracted in 200 components = 0.0339998 Jy ! Clean residual min=-0.014645 max=0.014531 Jy/beam ! Clean residual mean=0.000003 rms=0.003921 Jy/beam ! Combined flux in latest and established models = 1.66782 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260252 Jy ! Component: 100 - total flux cleaned = 0.00260024 Jy ! Component: 150 - total flux cleaned = 0.00259372 Jy ! Component: 200 - total flux cleaned = 0.00231377 Jy ! Total flux subtracted in 200 components = 0.00231377 Jy ! Clean residual min=-0.012999 max=0.012816 Jy/beam ! Clean residual mean=0.000017 rms=0.003519 Jy/beam ! Combined flux in latest and established models = 1.67014 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 193 components and 1.67014 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=18.88 mas, bpa=-14.43 degrees ! Estimated noise=2342.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00310285 Jy ! Component: 100 - total flux cleaned = -0.00234106 Jy ! Component: 150 - total flux cleaned = -0.00166738 Jy ! Component: 200 - total flux cleaned = -0.000482215 Jy ! Total flux subtracted in 200 components = -0.000482215 Jy ! Clean residual min=-0.013106 max=0.013087 Jy/beam ! Clean residual mean=0.000006 rms=0.003088 Jy/beam ! Combined flux in latest and established models = 1.66965 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 216 components and 1.66965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097341Jy sigma=0.000642 ! Fit after self-cal, rms=0.096750Jy sigma=0.000638 wmodel J1911-2006_S_2017_10_09_pus_map.mod ! Writing 216 model components to file: J1911-2006_S_2017_10_09_pus_map.mod wobs J1911-2006_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1911-2006_S_2017_10_09_pus_uvs.fits wwins J1911-2006_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J1911-2006_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00407558 Jy ! Component: 100 - total flux cleaned = -0.00544219 Jy ! Component: 150 - total flux cleaned = -0.00653521 Jy ! Component: 200 - total flux cleaned = -0.00653053 Jy ! Component: 250 - total flux cleaned = -0.00668408 Jy ! Component: 300 - total flux cleaned = -0.00744062 Jy ! Component: 350 - total flux cleaned = -0.00787568 Jy ! Component: 400 - total flux cleaned = -0.00829776 Jy ! Component: 450 - total flux cleaned = -0.0087013 Jy ! Component: 500 - total flux cleaned = -0.00895809 Jy ! Component: 550 - total flux cleaned = -0.00920804 Jy ! Component: 600 - total flux cleaned = -0.00956583 Jy ! Component: 650 - total flux cleaned = -0.00979168 Jy ! Component: 700 - total flux cleaned = -0.00956813 Jy ! Component: 750 - total flux cleaned = -0.00946001 Jy ! Component: 800 - total flux cleaned = -0.00904683 Jy ! Component: 850 - total flux cleaned = -0.00915043 Jy ! Component: 900 - total flux cleaned = -0.00905163 Jy ! Component: 950 - total flux cleaned = -0.00876764 Jy ! Component: 1000 - total flux cleaned = -0.00840044 Jy ! Component: 1050 - total flux cleaned = -0.00849307 Jy ! Component: 1100 - total flux cleaned = -0.00858057 Jy ! Component: 1150 - total flux cleaned = -0.00849259 Jy ! Component: 1200 - total flux cleaned = -0.00832294 Jy ! Component: 1250 - total flux cleaned = -0.00832295 Jy ! Component: 1300 - total flux cleaned = -0.00824107 Jy ! Component: 1350 - total flux cleaned = -0.00792906 Jy ! Component: 1400 - total flux cleaned = -0.00792798 Jy ! Component: 1450 - total flux cleaned = -0.00785219 Jy ! Component: 1500 - total flux cleaned = -0.00777946 Jy ! Component: 1550 - total flux cleaned = -0.00770726 Jy ! Component: 1600 - total flux cleaned = -0.00784758 Jy ! Component: 1650 - total flux cleaned = -0.00763884 Jy ! Component: 1700 - total flux cleaned = -0.0076391 Jy ! Component: 1750 - total flux cleaned = -0.00736925 Jy ! Component: 1800 - total flux cleaned = -0.00730478 Jy ! Component: 1850 - total flux cleaned = -0.0073056 Jy ! Component: 1900 - total flux cleaned = -0.00724286 Jy ! Component: 1950 - total flux cleaned = -0.00718058 Jy ! Component: 2000 - total flux cleaned = -0.00742724 Jy ! Component: 2050 - total flux cleaned = -0.0073647 Jy ! Component: 2100 - total flux cleaned = -0.00730551 Jy ! Component: 2150 - total flux cleaned = -0.00754139 Jy ! Component: 2200 - total flux cleaned = -0.00754002 Jy ! Component: 2250 - total flux cleaned = -0.00748301 Jy ! Component: 2300 - total flux cleaned = -0.00748288 Jy ! Component: 2350 - total flux cleaned = -0.00770427 Jy ! Component: 2400 - total flux cleaned = -0.00770355 Jy ! Component: 2450 - total flux cleaned = -0.00775677 Jy ! Component: 2500 - total flux cleaned = -0.00765026 Jy ! Component: 2550 - total flux cleaned = -0.00754573 Jy ! Component: 2600 - total flux cleaned = -0.00744288 Jy ! Component: 2650 - total flux cleaned = -0.00749486 Jy ! Component: 2700 - total flux cleaned = -0.00739303 Jy ! Component: 2750 - total flux cleaned = -0.00724261 Jy ! Component: 2800 - total flux cleaned = -0.00699555 Jy ! Component: 2850 - total flux cleaned = -0.00694692 Jy ! Component: 2900 - total flux cleaned = -0.00675354 Jy ! Component: 2950 - total flux cleaned = -0.00670636 Jy ! Component: 3000 - total flux cleaned = -0.00661158 Jy ! Component: 3050 - total flux cleaned = -0.00651798 Jy ! Component: 3100 - total flux cleaned = -0.00647106 Jy ! Component: 3150 - total flux cleaned = -0.00633355 Jy ! Component: 3200 - total flux cleaned = -0.00637925 Jy ! Component: 3250 - total flux cleaned = -0.00633448 Jy ! Component: 3300 - total flux cleaned = -0.00655708 Jy ! Component: 3350 - total flux cleaned = -0.00660131 Jy ! Component: 3400 - total flux cleaned = -0.00673279 Jy ! Component: 3450 - total flux cleaned = -0.00703729 Jy ! Component: 3500 - total flux cleaned = -0.00716662 Jy ! Component: 3550 - total flux cleaned = -0.00733795 Jy ! Component: 3600 - total flux cleaned = -0.00742343 Jy ! Component: 3650 - total flux cleaned = -0.00763491 Jy ! Component: 3700 - total flux cleaned = -0.00771924 Jy ! Component: 3750 - total flux cleaned = -0.0079279 Jy ! Component: 3800 - total flux cleaned = -0.00801094 Jy ! Component: 3850 - total flux cleaned = -0.00813446 Jy ! Component: 3900 - total flux cleaned = -0.00825699 Jy ! Component: 3950 - total flux cleaned = -0.00841964 Jy ! Component: 4000 - total flux cleaned = -0.008541 Jy ! Component: 4050 - total flux cleaned = -0.00870173 Jy ! Total flux subtracted in 4096 components = -0.00886177 Jy ! Clean residual min=-0.002870 max=0.002247 Jy/beam ! Clean residual mean=-0.000015 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 1.66079 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 551 components and 1.66079 Jy ![Exited script file: muppet] wmap "J1911-2006_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.601 x 18.88 at -14.43 degrees (North through East) ! Clean map min=-0.013692 max=1.2212 Jy/beam ! Writing clean map to FITS file: J1911-2006_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.22119 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000744052 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.182785 0.182785 0.36557 0.731139 1.46228 2.92456 5.84911 11.6982 23.3965 46.7929 93.5858 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.221 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.601 x 18.88 at -14.43 degrees (North through East) ! Clean map min=-0.013692 max=1.2212 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1911-2006_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:57 2019