! Started logfile: J1911-2006_S_2017_07_16_pus_uvs.log on Thu May 9 11:16:32 2019 obs J1911-2006_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1911-2006_S_2017_07_16_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.300855 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1911-2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1911-2006_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.791061Jy sigma=0.005821 ! Fit after self-cal, rms=0.519066Jy sigma=0.003752 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=10.39 mas, bpa=7.926 degrees ! Estimated noise=4741.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11251 Jy ! Component: 100 - total flux cleaned = 1.36436 Jy ! Total flux subtracted in 100 components = 1.36436 Jy ! Clean residual min=-0.070470 max=0.102245 Jy/beam ! Clean residual mean=0.000050 rms=0.028938 Jy/beam ! Combined flux in latest and established models = 1.36436 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.36436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247286Jy sigma=0.001756 ! Fit after self-cal, rms=0.247211Jy sigma=0.001755 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=10.76 mas, bpa=7.613 degrees ! Estimated noise=4209.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146429 Jy ! Component: 100 - total flux cleaned = 0.225404 Jy ! Component: 150 - total flux cleaned = 0.272475 Jy ! Component: 200 - total flux cleaned = 0.303098 Jy ! Total flux subtracted in 200 components = 0.303098 Jy ! Clean residual min=-0.034192 max=0.038251 Jy/beam ! Clean residual mean=0.000034 rms=0.010944 Jy/beam ! Combined flux in latest and established models = 1.66746 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 1.66746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133330Jy sigma=0.000957 ! Fit after self-cal, rms=0.132466Jy sigma=0.000951 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.03 ! LA 1.00 MK 1.00* NL 0.92 OV 0.99 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 0.99 ! LA 0.96 MK 1.00* NL 1.08 OV 1.01 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 0.98 ! LA 0.98 MK 1.00* NL 1.00 OV 0.93 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.132466Jy sigma=0.000951 ! Fit after self-cal, rms=0.100106Jy sigma=0.000732 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=10.83 mas, bpa=7.547 degrees ! Estimated noise=4178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796109 Jy ! Component: 100 - total flux cleaned = 0.0089904 Jy ! Component: 150 - total flux cleaned = 0.010204 Jy ! Component: 200 - total flux cleaned = 0.0110013 Jy ! Total flux subtracted in 200 components = 0.0110013 Jy ! Clean residual min=-0.019277 max=0.030934 Jy/beam ! Clean residual mean=-0.000001 rms=0.007581 Jy/beam ! Combined flux in latest and established models = 1.67846 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 1.67846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097456Jy sigma=0.000713 ! Fit after self-cal, rms=0.097239Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097239Jy sigma=0.000711 ! Fit after self-cal, rms=0.097184Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=10.82 mas, bpa=7.549 degrees ! Estimated noise=4177.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391118 Jy ! Component: 100 - total flux cleaned = 0.00368017 Jy ! Component: 150 - total flux cleaned = 0.00385594 Jy ! Component: 200 - total flux cleaned = 0.00419663 Jy ! Total flux subtracted in 200 components = 0.00419663 Jy ! Clean residual min=-0.018325 max=0.026646 Jy/beam ! Clean residual mean=-0.000001 rms=0.007177 Jy/beam ! Combined flux in latest and established models = 1.68265 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 1.68265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096200Jy sigma=0.000704 ! Fit after self-cal, rms=0.096132Jy sigma=0.000703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118751 Jy ! Component: 100 - total flux cleaned = 0.000715192 Jy ! Component: 150 - total flux cleaned = 0.000453069 Jy ! Component: 200 - total flux cleaned = 0.000570737 Jy ! Total flux subtracted in 200 components = 0.000570737 Jy ! Clean residual min=-0.017914 max=0.025782 Jy/beam ! Clean residual mean=-0.000001 rms=0.006991 Jy/beam ! Combined flux in latest and established models = 1.68322 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 1.68322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095682Jy sigma=0.000700 ! Fit after self-cal, rms=0.095643Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095643Jy sigma=0.000700 ! Fit after self-cal, rms=0.095569Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=10.82 mas, bpa=7.546 degrees ! Estimated noise=4175.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224251 Jy ! Component: 100 - total flux cleaned = -9.0367e-06 Jy ! Component: 150 - total flux cleaned = -0.000218344 Jy ! Component: 200 - total flux cleaned = -0.00031548 Jy ! Total flux subtracted in 200 components = -0.00031548 Jy ! Clean residual min=-0.017753 max=0.025285 Jy/beam ! Clean residual mean=-0.000000 rms=0.006862 Jy/beam ! Combined flux in latest and established models = 1.68291 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 1.68291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095288Jy sigma=0.000698 ! Fit after self-cal, rms=0.095271Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.16294e-05 Jy ! Component: 100 - total flux cleaned = 7.63256e-05 Jy ! Component: 150 - total flux cleaned = -0.000104988 Jy ! Component: 200 - total flux cleaned = -1.81397e-05 Jy ! Total flux subtracted in 200 components = -1.81397e-05 Jy ! Clean residual min=-0.017509 max=0.024926 Jy/beam ! Clean residual mean=-0.000000 rms=0.006776 Jy/beam ! Combined flux in latest and established models = 1.68289 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 1.68289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095069Jy sigma=0.000696 ! Fit after self-cal, rms=0.095062Jy sigma=0.000696 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095062Jy sigma=0.000696 ! Fit after self-cal, rms=0.095021Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.168 mas, bmaj=13.58 mas, bpa=-2.731 degrees ! Estimated noise=5395.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209227 Jy ! Component: 100 - total flux cleaned = 0.00214285 Jy ! Component: 150 - total flux cleaned = 0.00181951 Jy ! Component: 200 - total flux cleaned = 0.00168962 Jy ! Total flux subtracted in 200 components = 0.00168962 Jy ! Clean residual min=-0.022053 max=0.032765 Jy/beam ! Clean residual mean=-0.000003 rms=0.009930 Jy/beam ! Combined flux in latest and established models = 1.68458 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 1.68458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095484Jy sigma=0.000700 ! Fit after self-cal, rms=0.095161Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308257 Jy ! Component: 100 - total flux cleaned = -0.000282178 Jy ! Component: 150 - total flux cleaned = -0.00037175 Jy ! Component: 200 - total flux cleaned = -0.000375254 Jy ! Total flux subtracted in 200 components = -0.000375254 Jy ! Clean residual min=-0.021113 max=0.033496 Jy/beam ! Clean residual mean=-0.000004 rms=0.009792 Jy/beam ! Combined flux in latest and established models = 1.68421 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 1.68421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095589Jy sigma=0.000700 ! Fit after self-cal, rms=0.095349Jy sigma=0.000698 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=10.82 mas, bpa=7.549 degrees ! Estimated noise=4173.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 10.82 at 7.549 degrees (North through East) ! Clean map min=-0.018896 max=1.4675 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095349Jy sigma=0.000698 ! Fit after self-cal, rms=0.085969Jy sigma=0.000626 ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=10.82 mas, bpa=7.511 degrees ! Estimated noise=4174.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127711 Jy ! Component: 100 - total flux cleaned = -0.00145649 Jy ! Component: 150 - total flux cleaned = -0.00159654 Jy ! Component: 200 - total flux cleaned = -0.00184787 Jy ! Total flux subtracted in 200 components = -0.00184787 Jy ! Clean residual min=-0.018165 max=0.024318 Jy/beam ! Clean residual mean=-0.000001 rms=0.006534 Jy/beam ! Combined flux in latest and established models = 1.68236 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 1.68236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085375Jy sigma=0.000622 ! Fit after self-cal, rms=0.085353Jy sigma=0.000622 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000648856 Jy ! Component: 100 - total flux cleaned = -0.000745498 Jy ! Component: 150 - total flux cleaned = -0.000844647 Jy ! Component: 200 - total flux cleaned = -0.00102108 Jy ! Total flux subtracted in 200 components = -0.00102108 Jy ! Clean residual min=-0.017690 max=0.023595 Jy/beam ! Clean residual mean=-0.000001 rms=0.006490 Jy/beam ! Combined flux in latest and established models = 1.68134 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 1.68134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085143Jy sigma=0.000620 ! Fit after self-cal, rms=0.085135Jy sigma=0.000620 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085135Jy sigma=0.000620 ! Fit after self-cal, rms=0.085112Jy sigma=0.000620 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.022 mas, bmaj=10.43 mas, bpa=7.811 degrees ! Estimated noise=4685.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.09863 Jy ! Component: 100 - total flux cleaned = 1.34977 Jy ! Component: 150 - total flux cleaned = 1.46551 Jy ! Component: 200 - total flux cleaned = 1.53751 Jy ! Total flux subtracted in 200 components = 1.53751 Jy ! Clean residual min=-0.037889 max=0.047236 Jy/beam ! Clean residual mean=0.000011 rms=0.013541 Jy/beam ! Combined flux in latest and established models = 1.53751 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.53751 Jy ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=10.82 mas, bpa=7.522 degrees ! Estimated noise=4173.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0598774 Jy ! Component: 100 - total flux cleaned = 0.0954719 Jy ! Component: 150 - total flux cleaned = 0.118303 Jy ! Component: 200 - total flux cleaned = 0.126014 Jy ! Total flux subtracted in 200 components = 0.126014 Jy ! Clean residual min=-0.022867 max=0.032233 Jy/beam ! Clean residual mean=0.000000 rms=0.008544 Jy/beam ! Combined flux in latest and established models = 1.66353 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 1.66353 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.169 mas, bmaj=13.59 mas, bpa=-2.755 degrees ! Estimated noise=5393.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138753 Jy ! Component: 100 - total flux cleaned = 0.0155319 Jy ! Component: 150 - total flux cleaned = 0.0168601 Jy ! Component: 200 - total flux cleaned = 0.0168519 Jy ! Total flux subtracted in 200 components = 0.0168519 Jy ! Clean residual min=-0.022028 max=0.035163 Jy/beam ! Clean residual mean=-0.000004 rms=0.010159 Jy/beam ! Combined flux in latest and established models = 1.68038 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.47545e-06 Jy ! Component: 100 - total flux cleaned = -8.62857e-06 Jy ! Component: 150 - total flux cleaned = -1.21883e-05 Jy ! Component: 200 - total flux cleaned = 0.000165518 Jy ! Total flux subtracted in 200 components = 0.000165518 Jy ! Clean residual min=-0.021067 max=0.034081 Jy/beam ! Clean residual mean=-0.000004 rms=0.009907 Jy/beam ! Combined flux in latest and established models = 1.68055 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 1.68055 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=10.82 mas, bpa=7.522 degrees ! Estimated noise=4173.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00486893 Jy ! Component: 100 - total flux cleaned = -0.00229273 Jy ! Component: 150 - total flux cleaned = -0.00154601 Jy ! Component: 200 - total flux cleaned = -0.00135156 Jy ! Total flux subtracted in 200 components = -0.00135156 Jy ! Clean residual min=-0.019413 max=0.025999 Jy/beam ! Clean residual mean=-0.000001 rms=0.006894 Jy/beam ! Combined flux in latest and established models = 1.6792 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 1.6792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086287Jy sigma=0.000630 ! Fit after self-cal, rms=0.086229Jy sigma=0.000629 wmodel J1911-2006_S_2017_07_16_pus_map.mod ! Writing 42 model components to file: J1911-2006_S_2017_07_16_pus_map.mod wobs J1911-2006_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1911-2006_S_2017_07_16_pus_uvs.fits wwins J1911-2006_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1911-2006_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107942 Jy ! Component: 100 - total flux cleaned = 0.0138773 Jy ! Component: 150 - total flux cleaned = 0.0130565 Jy ! Component: 200 - total flux cleaned = 0.0115636 Jy ! Component: 250 - total flux cleaned = 0.0100151 Jy ! Component: 300 - total flux cleaned = 0.00844799 Jy ! Component: 350 - total flux cleaned = 0.00650754 Jy ! Component: 400 - total flux cleaned = 0.00457872 Jy ! Component: 450 - total flux cleaned = 0.00268379 Jy ! Component: 500 - total flux cleaned = 0.00135152 Jy ! Component: 550 - total flux cleaned = 0.000492775 Jy ! Component: 600 - total flux cleaned = -0.000296517 Jy ! Component: 650 - total flux cleaned = -0.000914031 Jy ! Component: 700 - total flux cleaned = -0.0012952 Jy ! Component: 750 - total flux cleaned = -0.0015637 Jy ! Component: 800 - total flux cleaned = -0.00181253 Jy ! Component: 850 - total flux cleaned = -0.00204334 Jy ! Component: 900 - total flux cleaned = -0.00234704 Jy ! Component: 950 - total flux cleaned = -0.00242288 Jy ! Component: 1000 - total flux cleaned = -0.00249829 Jy ! Component: 1050 - total flux cleaned = -0.00272378 Jy ! Component: 1100 - total flux cleaned = -0.00294919 Jy ! Component: 1150 - total flux cleaned = -0.0031737 Jy ! Component: 1200 - total flux cleaned = -0.00347452 Jy ! Component: 1250 - total flux cleaned = -0.00385113 Jy ! Component: 1300 - total flux cleaned = -0.00407868 Jy ! Component: 1350 - total flux cleaned = -0.00438368 Jy ! Component: 1400 - total flux cleaned = -0.00461417 Jy ! Component: 1450 - total flux cleaned = -0.00476988 Jy ! Component: 1500 - total flux cleaned = -0.00484855 Jy ! Component: 1550 - total flux cleaned = -0.00476906 Jy ! Component: 1600 - total flux cleaned = -0.00476977 Jy ! Component: 1650 - total flux cleaned = -0.00468454 Jy ! Component: 1700 - total flux cleaned = -0.00459759 Jy ! Component: 1750 - total flux cleaned = -0.00459762 Jy ! Component: 1800 - total flux cleaned = -0.00441532 Jy ! Component: 1850 - total flux cleaned = -0.00432068 Jy ! Component: 1900 - total flux cleaned = -0.00432002 Jy ! Component: 1950 - total flux cleaned = -0.00431901 Jy ! Component: 2000 - total flux cleaned = -0.0043174 Jy ! Component: 2050 - total flux cleaned = -0.00442118 Jy ! Component: 2100 - total flux cleaned = -0.0043134 Jy ! Component: 2150 - total flux cleaned = -0.00431165 Jy ! Component: 2200 - total flux cleaned = -0.00442818 Jy ! Component: 2250 - total flux cleaned = -0.00442987 Jy ! Component: 2300 - total flux cleaned = -0.00442946 Jy ! Component: 2350 - total flux cleaned = -0.00442988 Jy ! Component: 2400 - total flux cleaned = -0.0044298 Jy ! Component: 2450 - total flux cleaned = -0.00456557 Jy ! Component: 2500 - total flux cleaned = -0.00456452 Jy ! Component: 2550 - total flux cleaned = -0.00455977 Jy ! Component: 2600 - total flux cleaned = -0.00455564 Jy ! Component: 2650 - total flux cleaned = -0.00471261 Jy ! Component: 2700 - total flux cleaned = -0.00471474 Jy ! Component: 2750 - total flux cleaned = -0.00471462 Jy ! Component: 2800 - total flux cleaned = -0.00488867 Jy ! Component: 2850 - total flux cleaned = -0.0048895 Jy ! Component: 2900 - total flux cleaned = -0.00488887 Jy ! Component: 2950 - total flux cleaned = -0.00508065 Jy ! Component: 3000 - total flux cleaned = -0.00508338 Jy ! Component: 3050 - total flux cleaned = -0.00488097 Jy ! Component: 3100 - total flux cleaned = -0.00487909 Jy ! Component: 3150 - total flux cleaned = -0.00488206 Jy ! Component: 3200 - total flux cleaned = -0.00488651 Jy ! Component: 3250 - total flux cleaned = -0.00488586 Jy ! Component: 3300 - total flux cleaned = -0.00512692 Jy ! Component: 3350 - total flux cleaned = -0.0048748 Jy ! Component: 3400 - total flux cleaned = -0.00513651 Jy ! Component: 3450 - total flux cleaned = -0.00513497 Jy ! Component: 3500 - total flux cleaned = -0.00513608 Jy ! Component: 3550 - total flux cleaned = -0.00484712 Jy ! Component: 3600 - total flux cleaned = -0.00484681 Jy ! Component: 3650 - total flux cleaned = -0.00485059 Jy ! Component: 3700 - total flux cleaned = -0.00485309 Jy ! Component: 3750 - total flux cleaned = -0.00485478 Jy ! Component: 3800 - total flux cleaned = -0.00451134 Jy ! Component: 3850 - total flux cleaned = -0.00451774 Jy ! Component: 3900 - total flux cleaned = -0.00414022 Jy ! Component: 3950 - total flux cleaned = -0.00413 Jy ! Component: 4000 - total flux cleaned = -0.00412765 Jy ! Component: 4050 - total flux cleaned = -0.0037182 Jy ! Total flux subtracted in 4096 components = -0.00372127 Jy ! Clean residual min=-0.023975 max=0.023871 Jy/beam ! Clean residual mean=-0.000005 rms=0.005872 Jy/beam ! Combined flux in latest and established models = 1.67547 Jy keep ! Adding 164 model components to the UV plane model. ! The established model now contains 206 components and 1.67547 Jy ![Exited script file: muppet] wmap "J1911-2006_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.387 x 10.82 at 7.522 degrees (North through East) ! Clean map min=-0.061048 max=1.4661 Jy/beam ! Writing clean map to FITS file: J1911-2006_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.46608 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00665655 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.36211 1.36211 2.72423 5.44846 10.8969 21.7938 43.5876 87.1753 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0199 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.466 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.387 x 10.82 at 7.522 degrees (North through East) ! Clean map min=-0.061048 max=1.4661 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1911-2006_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:16:37 2019