! Started logfile: J1911-2006_S_2017_07_09_pus_uvs.log on Wed May 8 14:56:04 2019 obs J1911-2006_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1911-2006_S_2017_07_09_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.42 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1911-2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 756 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1911-2006_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.594718Jy sigma=0.004930 ! Fit after self-cal, rms=0.559545Jy sigma=0.004623 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=23.78 mas, bpa=-8.596 degrees ! Estimated noise=4224.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.02494 Jy ! Component: 100 - total flux cleaned = 1.33852 Jy ! Total flux subtracted in 100 components = 1.33852 Jy ! Clean residual min=-0.059594 max=0.142783 Jy/beam ! Clean residual mean=0.001909 rms=0.029693 Jy/beam ! Combined flux in latest and established models = 1.33852 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.33852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300044Jy sigma=0.002454 ! Fit after self-cal, rms=0.299938Jy sigma=0.002453 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=23.97 mas, bpa=-8.095 degrees ! Estimated noise=3719.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202281 Jy ! Component: 100 - total flux cleaned = 0.282948 Jy ! Component: 150 - total flux cleaned = 0.32597 Jy ! Component: 200 - total flux cleaned = 0.35426 Jy ! Total flux subtracted in 200 components = 0.35426 Jy ! Clean residual min=-0.029751 max=0.051231 Jy/beam ! Clean residual mean=0.001430 rms=0.012270 Jy/beam ! Combined flux in latest and established models = 1.69278 Jy ! Performing phase self-cal ! Adding 88 model components to the UV plane model. ! The established model now contains 89 components and 1.69278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122106Jy sigma=0.001018 ! Fit after self-cal, rms=0.121877Jy sigma=0.001016 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.99 ! LA 0.97 MK 1.02 NL 1.07 OV 1.00 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.97 ! LA 0.94 MK 1.00 NL 1.00* OV 1.04 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 0.97 ! LA 0.95 MK 1.02 NL 1.00* OV 0.95 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.121877Jy sigma=0.001016 ! Fit after self-cal, rms=0.082034Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.757 mas, bmaj=23.72 mas, bpa=-8.315 degrees ! Estimated noise=3835.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200493 Jy ! Component: 100 - total flux cleaned = 0.0215437 Jy ! Component: 150 - total flux cleaned = 0.0228208 Jy ! Component: 200 - total flux cleaned = 0.0230155 Jy ! Total flux subtracted in 200 components = 0.0230155 Jy ! Clean residual min=-0.009450 max=0.009363 Jy/beam ! Clean residual mean=0.000044 rms=0.002643 Jy/beam ! Combined flux in latest and established models = 1.7158 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 125 components and 1.7158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076528Jy sigma=0.000648 ! Fit after self-cal, rms=0.076436Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076436Jy sigma=0.000647 ! Fit after self-cal, rms=0.076205Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=23.71 mas, bpa=-8.316 degrees ! Estimated noise=3828.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204512 Jy ! Component: 100 - total flux cleaned = 0.00119117 Jy ! Component: 150 - total flux cleaned = 0.000712925 Jy ! Component: 200 - total flux cleaned = 0.000411672 Jy ! Total flux subtracted in 200 components = 0.000411672 Jy ! Clean residual min=-0.007903 max=0.008505 Jy/beam ! Clean residual mean=0.000023 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 1.71621 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 142 components and 1.71621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075717Jy sigma=0.000642 ! Fit after self-cal, rms=0.075702Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.99951e-05 Jy ! Component: 100 - total flux cleaned = 2.83628e-05 Jy ! Component: 150 - total flux cleaned = 0.000230297 Jy ! Component: 200 - total flux cleaned = 0.000354176 Jy ! Total flux subtracted in 200 components = 0.000354176 Jy ! Clean residual min=-0.007402 max=0.008348 Jy/beam ! Clean residual mean=0.000022 rms=0.002227 Jy/beam ! Combined flux in latest and established models = 1.71656 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 173 components and 1.71656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075566Jy sigma=0.000641 ! Fit after self-cal, rms=0.075559Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075559Jy sigma=0.000641 ! Fit after self-cal, rms=0.075496Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=23.71 mas, bpa=-8.318 degrees ! Estimated noise=3826.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100712 Jy ! Component: 100 - total flux cleaned = -2.39804e-05 Jy ! Component: 150 - total flux cleaned = -0.000254902 Jy ! Component: 200 - total flux cleaned = -0.00047126 Jy ! Total flux subtracted in 200 components = -0.00047126 Jy ! Clean residual min=-0.007068 max=0.008038 Jy/beam ! Clean residual mean=0.000007 rms=0.002148 Jy/beam ! Combined flux in latest and established models = 1.71609 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 198 components and 1.71609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075405Jy sigma=0.000640 ! Fit after self-cal, rms=0.075401Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000522985 Jy ! Component: 100 - total flux cleaned = -0.000728331 Jy ! Component: 150 - total flux cleaned = -0.000877513 Jy ! Component: 200 - total flux cleaned = -0.00102109 Jy ! Total flux subtracted in 200 components = -0.00102109 Jy ! Clean residual min=-0.007087 max=0.007956 Jy/beam ! Clean residual mean=0.000017 rms=0.002106 Jy/beam ! Combined flux in latest and established models = 1.71507 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 216 components and 1.71507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075340Jy sigma=0.000640 ! Fit after self-cal, rms=0.075338Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075338Jy sigma=0.000640 ! Fit after self-cal, rms=0.075310Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.16 mas, bmaj=26.66 mas, bpa=5.979 degrees ! Estimated noise=4680.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000329714 Jy ! Component: 100 - total flux cleaned = -0.000600931 Jy ! Component: 150 - total flux cleaned = -0.000781476 Jy ! Component: 200 - total flux cleaned = -0.0010638 Jy ! Total flux subtracted in 200 components = -0.0010638 Jy ! Clean residual min=-0.009336 max=0.009669 Jy/beam ! Clean residual mean=0.000025 rms=0.002988 Jy/beam ! Combined flux in latest and established models = 1.71401 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 235 components and 1.71401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075254Jy sigma=0.000639 ! Fit after self-cal, rms=0.075251Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000494067 Jy ! Component: 100 - total flux cleaned = -0.000599767 Jy ! Component: 150 - total flux cleaned = -0.000747479 Jy ! Component: 200 - total flux cleaned = -0.000887588 Jy ! Total flux subtracted in 200 components = -0.000887588 Jy ! Clean residual min=-0.009233 max=0.009472 Jy/beam ! Clean residual mean=0.000039 rms=0.002930 Jy/beam ! Combined flux in latest and established models = 1.71312 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 248 components and 1.71312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075225Jy sigma=0.000639 ! Fit after self-cal, rms=0.075222Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=23.71 mas, bpa=-8.319 degrees ! Estimated noise=3825.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.76 x 23.71 at -8.319 degrees (North through East) ! Clean map min=-0.0069979 max=1.4101 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075222Jy sigma=0.000639 ! Fit after self-cal, rms=0.066886Jy sigma=0.000565 ! Inverting map and beam ! Estimated beam: bmin=3.758 mas, bmaj=23.71 mas, bpa=-8.321 degrees ! Estimated noise=3822.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214014 Jy ! Component: 100 - total flux cleaned = -0.000578929 Jy ! Component: 150 - total flux cleaned = -0.000938441 Jy ! Component: 200 - total flux cleaned = -0.00124359 Jy ! Total flux subtracted in 200 components = -0.00124359 Jy ! Clean residual min=-0.006583 max=0.007742 Jy/beam ! Clean residual mean=0.000012 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 1.71188 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 269 components and 1.71188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066790Jy sigma=0.000565 ! Fit after self-cal, rms=0.066784Jy sigma=0.000565 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000709482 Jy ! Component: 100 - total flux cleaned = -0.000925789 Jy ! Component: 150 - total flux cleaned = -0.000958046 Jy ! Component: 200 - total flux cleaned = -0.00105472 Jy ! Total flux subtracted in 200 components = -0.00105472 Jy ! Clean residual min=-0.006554 max=0.007642 Jy/beam ! Clean residual mean=0.000020 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 1.71082 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 294 components and 1.71082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066752Jy sigma=0.000564 ! Fit after self-cal, rms=0.066751Jy sigma=0.000564 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066751Jy sigma=0.000564 ! Fit after self-cal, rms=0.066735Jy sigma=0.000564 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=23.41 mas, bpa=-8.898 degrees ! Estimated noise=4351.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04758 Jy ! Component: 100 - total flux cleaned = 1.36172 Jy ! Component: 150 - total flux cleaned = 1.50896 Jy ! Component: 200 - total flux cleaned = 1.57851 Jy ! Total flux subtracted in 200 components = 1.57851 Jy ! Clean residual min=-0.021070 max=0.031390 Jy/beam ! Clean residual mean=0.000535 rms=0.008235 Jy/beam ! Combined flux in latest and established models = 1.57851 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.57851 Jy ! Inverting map and beam ! Estimated beam: bmin=3.758 mas, bmaj=23.71 mas, bpa=-8.322 degrees ! Estimated noise=3822.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423129 Jy ! Component: 100 - total flux cleaned = 0.0675591 Jy ! Component: 150 - total flux cleaned = 0.0822134 Jy ! Component: 200 - total flux cleaned = 0.0926326 Jy ! Total flux subtracted in 200 components = 0.0926326 Jy ! Clean residual min=-0.013269 max=0.011115 Jy/beam ! Clean residual mean=0.000322 rms=0.003717 Jy/beam ! Combined flux in latest and established models = 1.67114 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 104 components and 1.67114 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.15 mas, bmaj=26.66 mas, bpa=5.966 degrees ! Estimated noise=4677.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143318 Jy ! Component: 100 - total flux cleaned = 0.0230643 Jy ! Component: 150 - total flux cleaned = 0.0279374 Jy ! Component: 200 - total flux cleaned = 0.0310084 Jy ! Total flux subtracted in 200 components = 0.0310084 Jy ! Clean residual min=-0.011788 max=0.009359 Jy/beam ! Clean residual mean=0.000091 rms=0.003337 Jy/beam ! Combined flux in latest and established models = 1.70215 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244901 Jy ! Component: 100 - total flux cleaned = 0.00417323 Jy ! Component: 150 - total flux cleaned = 0.00539759 Jy ! Component: 200 - total flux cleaned = 0.00608573 Jy ! Total flux subtracted in 200 components = 0.00608573 Jy ! Clean residual min=-0.009964 max=0.009656 Jy/beam ! Clean residual mean=0.000013 rms=0.003067 Jy/beam ! Combined flux in latest and established models = 1.70823 Jy ! Adding 104 model components to the UV plane model. ! The established model now contains 206 components and 1.70823 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.758 mas, bmaj=23.71 mas, bpa=-8.322 degrees ! Estimated noise=3822.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185627 Jy ! Component: 100 - total flux cleaned = 0.00210778 Jy ! Component: 150 - total flux cleaned = 0.00203732 Jy ! Component: 200 - total flux cleaned = 0.00221508 Jy ! Total flux subtracted in 200 components = 0.00221508 Jy ! Clean residual min=-0.007032 max=0.008000 Jy/beam ! Clean residual mean=-0.000007 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 1.71045 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 238 components and 1.71045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067071Jy sigma=0.000567 ! Fit after self-cal, rms=0.067063Jy sigma=0.000567 wmodel J1911-2006_S_2017_07_09_pus_map.mod ! Writing 238 model components to file: J1911-2006_S_2017_07_09_pus_map.mod wobs J1911-2006_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1911-2006_S_2017_07_09_pus_uvs.fits wwins J1911-2006_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J1911-2006_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910874 Jy ! Component: 100 - total flux cleaned = 0.000713536 Jy ! Component: 150 - total flux cleaned = 3.99172e-05 Jy ! Component: 200 - total flux cleaned = -0.000227283 Jy ! Component: 250 - total flux cleaned = -0.000391214 Jy ! Component: 300 - total flux cleaned = -0.000547379 Jy ! Component: 350 - total flux cleaned = -0.000762738 Jy ! Component: 400 - total flux cleaned = -0.000825912 Jy ! Component: 450 - total flux cleaned = -0.000824122 Jy ! Component: 500 - total flux cleaned = -0.000884924 Jy ! Component: 550 - total flux cleaned = -0.000887195 Jy ! Component: 600 - total flux cleaned = -0.000999313 Jy ! Component: 650 - total flux cleaned = -0.00105243 Jy ! Component: 700 - total flux cleaned = -0.00110303 Jy ! Component: 750 - total flux cleaned = -0.00100519 Jy ! Component: 800 - total flux cleaned = -0.000957754 Jy ! Component: 850 - total flux cleaned = -0.000912214 Jy ! Component: 900 - total flux cleaned = -0.000869005 Jy ! Component: 950 - total flux cleaned = -0.000911349 Jy ! Component: 1000 - total flux cleaned = -0.000952094 Jy ! Component: 1050 - total flux cleaned = -0.000991863 Jy ! Component: 1100 - total flux cleaned = -0.00103069 Jy ! Component: 1150 - total flux cleaned = -0.000992356 Jy ! Component: 1200 - total flux cleaned = -0.00114066 Jy ! Component: 1250 - total flux cleaned = -0.00139536 Jy ! Component: 1300 - total flux cleaned = -0.00157387 Jy ! Component: 1350 - total flux cleaned = -0.00185657 Jy ! Component: 1400 - total flux cleaned = -0.00213537 Jy ! Component: 1450 - total flux cleaned = -0.00244482 Jy ! Component: 1500 - total flux cleaned = -0.00271655 Jy ! Component: 1550 - total flux cleaned = -0.00295215 Jy ! Component: 1600 - total flux cleaned = -0.00308607 Jy ! Component: 1650 - total flux cleaned = -0.00341723 Jy ! Component: 1700 - total flux cleaned = -0.00368088 Jy ! Component: 1750 - total flux cleaned = -0.00400818 Jy ! Component: 1800 - total flux cleaned = -0.00436655 Jy ! Component: 1850 - total flux cleaned = -0.00465856 Jy ! Component: 1900 - total flux cleaned = -0.00478797 Jy ! Component: 1950 - total flux cleaned = -0.00498234 Jy ! Component: 2000 - total flux cleaned = -0.00504756 Jy ! Component: 2050 - total flux cleaned = -0.00514566 Jy ! Component: 2100 - total flux cleaned = -0.00517818 Jy ! Component: 2150 - total flux cleaned = -0.00521137 Jy ! Component: 2200 - total flux cleaned = -0.00524464 Jy ! Component: 2250 - total flux cleaned = -0.005312 Jy ! Component: 2300 - total flux cleaned = -0.00534577 Jy ! Component: 2350 - total flux cleaned = -0.00544852 Jy ! Component: 2400 - total flux cleaned = -0.00555204 Jy ! Component: 2450 - total flux cleaned = -0.00569195 Jy ! Component: 2500 - total flux cleaned = -0.0057622 Jy ! Component: 2550 - total flux cleaned = -0.00590507 Jy ! Component: 2600 - total flux cleaned = -0.00597749 Jy ! Component: 2650 - total flux cleaned = -0.00608695 Jy ! Component: 2700 - total flux cleaned = -0.0061979 Jy ! Component: 2750 - total flux cleaned = -0.00634779 Jy ! Component: 2800 - total flux cleaned = -0.00642364 Jy ! Component: 2850 - total flux cleaned = -0.00649993 Jy ! Component: 2900 - total flux cleaned = -0.00653877 Jy ! Component: 2950 - total flux cleaned = -0.00657791 Jy ! Component: 3000 - total flux cleaned = -0.00653765 Jy ! Component: 3050 - total flux cleaned = -0.00653752 Jy ! Component: 3100 - total flux cleaned = -0.00657911 Jy ! Component: 3150 - total flux cleaned = -0.00649623 Jy ! Component: 3200 - total flux cleaned = -0.00645373 Jy ! Component: 3250 - total flux cleaned = -0.0063671 Jy ! Component: 3300 - total flux cleaned = -0.00641136 Jy ! Component: 3350 - total flux cleaned = -0.00632264 Jy ! Component: 3400 - total flux cleaned = -0.00632267 Jy ! Component: 3450 - total flux cleaned = -0.00623067 Jy ! Component: 3500 - total flux cleaned = -0.00623023 Jy ! Component: 3550 - total flux cleaned = -0.00623105 Jy ! Component: 3600 - total flux cleaned = -0.00618362 Jy ! Component: 3650 - total flux cleaned = -0.00613512 Jy ! Component: 3700 - total flux cleaned = -0.00608545 Jy ! Component: 3750 - total flux cleaned = -0.00598435 Jy ! Component: 3800 - total flux cleaned = -0.00588092 Jy ! Component: 3850 - total flux cleaned = -0.00588053 Jy ! Component: 3900 - total flux cleaned = -0.00571988 Jy ! Component: 3950 - total flux cleaned = -0.00566464 Jy ! Component: 4000 - total flux cleaned = -0.00572017 Jy ! Component: 4050 - total flux cleaned = -0.00566396 Jy ! Total flux subtracted in 4096 components = -0.00560636 Jy ! Clean residual min=-0.003082 max=0.003209 Jy/beam ! Clean residual mean=-0.000125 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 1.70484 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 471 components and 1.70484 Jy ![Exited script file: muppet] wmap "J1911-2006_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.758 x 23.71 at -8.322 degrees (North through East) ! Clean map min=-0.0054155 max=1.4074 Jy/beam ! Writing clean map to FITS file: J1911-2006_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.40737 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.001285 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.273914 0.273914 0.547828 1.09566 2.19131 4.38263 8.76525 17.5305 35.061 70.122 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0038 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.407 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.758 x 23.71 at -8.322 degrees (North through East) ! Clean map min=-0.0054155 max=1.4074 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1911-2006_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:56:08 2019