! Started logfile: J1911-2006_S_2017_03_23_pus_uvs.log on Mon May 13 10:07:28 2019 obs J1911-2006_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1911-2006_S_2017_03_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J1911-2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1911-2006_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.581853Jy sigma=0.004086 ! Fit after self-cal, rms=0.526337Jy sigma=0.003676 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=7.392 mas, bpa=-5.977 degrees ! Estimated noise=3438.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.983923 Jy ! Component: 100 - total flux cleaned = 1.26995 Jy ! Total flux subtracted in 100 components = 1.26995 Jy ! Clean residual min=-0.062450 max=0.115817 Jy/beam ! Clean residual mean=-0.000038 rms=0.019904 Jy/beam ! Combined flux in latest and established models = 1.26995 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.26995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357093Jy sigma=0.002413 ! Fit after self-cal, rms=0.356940Jy sigma=0.002412 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=8.123 mas, bpa=-4.909 degrees ! Estimated noise=3018.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185346 Jy ! Component: 100 - total flux cleaned = 0.277085 Jy ! Component: 150 - total flux cleaned = 0.328079 Jy ! Component: 200 - total flux cleaned = 0.358109 Jy ! Total flux subtracted in 200 components = 0.358109 Jy ! Clean residual min=-0.056003 max=0.063227 Jy/beam ! Clean residual mean=-0.000079 rms=0.015128 Jy/beam ! Combined flux in latest and established models = 1.62806 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 61 components and 1.62806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243450Jy sigma=0.001628 ! Fit after self-cal, rms=0.243419Jy sigma=0.001628 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.02 KP 1.03 ! LA 0.99 MK 0.98 NL 0.94 OV 1.04 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.96 HN 1.06 KP 0.99 ! LA 0.94 MK 0.97 NL 1.09 OV 1.07 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 1.04 KP 0.87 ! LA 0.74 MK 0.99 NL 1.23 OV 0.97 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.03 HN 1.02 KP 1.00* ! LA 0.77 MK 1.13 NL 1.00* OV 1.38 ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.243419Jy sigma=0.001628 ! Fit after self-cal, rms=0.122922Jy sigma=0.000831 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=8.197 mas, bpa=-4.857 degrees ! Estimated noise=3022.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 62). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410295 Jy ! Component: 100 - total flux cleaned = 0.0509013 Jy ! Component: 150 - total flux cleaned = 0.0556299 Jy ! Component: 200 - total flux cleaned = 0.0577583 Jy ! Total flux subtracted in 200 components = 0.0577583 Jy ! Clean residual min=-0.015089 max=0.023475 Jy/beam ! Clean residual mean=0.000000 rms=0.004203 Jy/beam ! Combined flux in latest and established models = 1.68582 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 1.68582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109176Jy sigma=0.000732 ! Fit after self-cal, rms=0.109094Jy sigma=0.000729 ! Inverting map ! Added new window around map position (6, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184235 Jy ! Component: 100 - total flux cleaned = 0.021612 Jy ! Component: 150 - total flux cleaned = 0.023442 Jy ! Component: 200 - total flux cleaned = 0.0246488 Jy ! Total flux subtracted in 200 components = 0.0246488 Jy ! Clean residual min=-0.012320 max=0.015891 Jy/beam ! Clean residual mean=-0.000003 rms=0.003191 Jy/beam ! Combined flux in latest and established models = 1.71047 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 1.71047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104085Jy sigma=0.000697 ! Fit after self-cal, rms=0.103684Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103684Jy sigma=0.000695 ! Fit after self-cal, rms=0.101911Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.184 mas, bpa=-4.818 degrees ! Estimated noise=3015.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00836173 Jy ! Component: 100 - total flux cleaned = 0.00962296 Jy ! Component: 150 - total flux cleaned = 0.0102601 Jy ! Component: 200 - total flux cleaned = 0.010454 Jy ! Total flux subtracted in 200 components = 0.010454 Jy ! Clean residual min=-0.010605 max=0.011876 Jy/beam ! Clean residual mean=-0.000001 rms=0.002764 Jy/beam ! Combined flux in latest and established models = 1.72092 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 1.72092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100440Jy sigma=0.000680 ! Fit after self-cal, rms=0.100323Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173765 Jy ! Component: 100 - total flux cleaned = 0.00191203 Jy ! Component: 150 - total flux cleaned = 0.00175742 Jy ! Component: 200 - total flux cleaned = 0.00161289 Jy ! Total flux subtracted in 200 components = 0.00161289 Jy ! Clean residual min=-0.009864 max=0.010860 Jy/beam ! Clean residual mean=-0.000001 rms=0.002650 Jy/beam ! Combined flux in latest and established models = 1.72253 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 123 components and 1.72253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099806Jy sigma=0.000676 ! Fit after self-cal, rms=0.099761Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099761Jy sigma=0.000676 ! Fit after self-cal, rms=0.099241Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=8.181 mas, bpa=-4.798 degrees ! Estimated noise=3013.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351211 Jy ! Component: 100 - total flux cleaned = 0.00401503 Jy ! Component: 150 - total flux cleaned = 0.00416218 Jy ! Component: 200 - total flux cleaned = 0.00429709 Jy ! Total flux subtracted in 200 components = 0.00429709 Jy ! Clean residual min=-0.009004 max=0.010096 Jy/beam ! Clean residual mean=-0.000000 rms=0.002430 Jy/beam ! Combined flux in latest and established models = 1.72683 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 132 components and 1.72683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098663Jy sigma=0.000671 ! Fit after self-cal, rms=0.098582Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000921827 Jy ! Component: 100 - total flux cleaned = 0.000923186 Jy ! Component: 150 - total flux cleaned = 0.000796089 Jy ! Component: 200 - total flux cleaned = 0.000678191 Jy ! Total flux subtracted in 200 components = 0.000678191 Jy ! Clean residual min=-0.008436 max=0.009840 Jy/beam ! Clean residual mean=-0.000001 rms=0.002344 Jy/beam ! Combined flux in latest and established models = 1.72751 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 142 components and 1.72751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098261Jy sigma=0.000668 ! Fit after self-cal, rms=0.098232Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098232Jy sigma=0.000668 ! Fit after self-cal, rms=0.098029Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.724 mas, bmaj=17.7 mas, bpa=1.372 degrees ! Estimated noise=3809.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149207 Jy ! Component: 100 - total flux cleaned = 0.000174311 Jy ! Component: 150 - total flux cleaned = -0.00106342 Jy ! Component: 200 - total flux cleaned = -0.00213907 Jy ! Total flux subtracted in 200 components = -0.00213907 Jy ! Clean residual min=-0.010985 max=0.012211 Jy/beam ! Clean residual mean=-0.000007 rms=0.003039 Jy/beam ! Combined flux in latest and established models = 1.72537 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 157 components and 1.72537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097844Jy sigma=0.000666 ! Fit after self-cal, rms=0.097734Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404203 Jy ! Component: 100 - total flux cleaned = 0.000163348 Jy ! Component: 150 - total flux cleaned = 5.46026e-05 Jy ! Component: 200 - total flux cleaned = 5.2164e-05 Jy ! Total flux subtracted in 200 components = 5.2164e-05 Jy ! Clean residual min=-0.010443 max=0.012010 Jy/beam ! Clean residual mean=-0.000007 rms=0.002928 Jy/beam ! Combined flux in latest and established models = 1.72542 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 167 components and 1.72542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097650Jy sigma=0.000665 ! Fit after self-cal, rms=0.097607Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.179 mas, bpa=-4.791 degrees ! Estimated noise=3012.71 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 8.179 at -4.791 degrees (North through East) ! Clean map min=-0.017354 max=1.2812 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097607Jy sigma=0.000665 ! Fit after self-cal, rms=0.091326Jy sigma=0.000617 ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.182 mas, bpa=-4.753 degrees ! Estimated noise=3014.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305985 Jy ! Component: 100 - total flux cleaned = 0.00428295 Jy ! Component: 150 - total flux cleaned = 0.00475773 Jy ! Component: 200 - total flux cleaned = 0.00497279 Jy ! Total flux subtracted in 200 components = 0.00497279 Jy ! Clean residual min=-0.007541 max=0.008530 Jy/beam ! Clean residual mean=-0.000001 rms=0.002031 Jy/beam ! Combined flux in latest and established models = 1.73039 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 189 components and 1.73039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090937Jy sigma=0.000614 ! Fit after self-cal, rms=0.090920Jy sigma=0.000614 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000740211 Jy ! Component: 100 - total flux cleaned = 0.000835271 Jy ! Component: 150 - total flux cleaned = 0.000738521 Jy ! Component: 200 - total flux cleaned = 0.000553028 Jy ! Total flux subtracted in 200 components = 0.000553028 Jy ! Clean residual min=-0.007364 max=0.008331 Jy/beam ! Clean residual mean=-0.000001 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 1.73095 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 198 components and 1.73095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090719Jy sigma=0.000613 ! Fit after self-cal, rms=0.090707Jy sigma=0.000613 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090707Jy sigma=0.000613 ! Fit after self-cal, rms=0.090580Jy sigma=0.000612 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=7.399 mas, bpa=-5.704 degrees ! Estimated noise=3469.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.992534 Jy ! Component: 100 - total flux cleaned = 1.2789 Jy ! Component: 150 - total flux cleaned = 1.41023 Jy ! Component: 200 - total flux cleaned = 1.4913 Jy ! Total flux subtracted in 200 components = 1.4913 Jy ! Clean residual min=-0.027261 max=0.042781 Jy/beam ! Clean residual mean=-0.000010 rms=0.008118 Jy/beam ! Combined flux in latest and established models = 1.4913 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 1.4913 Jy ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.18 mas, bpa=-4.769 degrees ! Estimated noise=3013.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0749181 Jy ! Component: 100 - total flux cleaned = 0.117159 Jy ! Component: 150 - total flux cleaned = 0.144629 Jy ! Component: 200 - total flux cleaned = 0.164488 Jy ! Total flux subtracted in 200 components = 0.164488 Jy ! Clean residual min=-0.011020 max=0.013821 Jy/beam ! Clean residual mean=-0.000009 rms=0.003793 Jy/beam ! Combined flux in latest and established models = 1.65579 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 86 components and 1.65579 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.716 mas, bmaj=17.69 mas, bpa=1.363 degrees ! Estimated noise=3811.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238315 Jy ! Component: 100 - total flux cleaned = 0.0385547 Jy ! Component: 150 - total flux cleaned = 0.0486414 Jy ! Component: 200 - total flux cleaned = 0.0520919 Jy ! Total flux subtracted in 200 components = 0.0520919 Jy ! Clean residual min=-0.011424 max=0.013805 Jy/beam ! Clean residual mean=-0.000017 rms=0.003427 Jy/beam ! Combined flux in latest and established models = 1.70789 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273179 Jy ! Component: 100 - total flux cleaned = 0.00512138 Jy ! Component: 150 - total flux cleaned = 0.00741038 Jy ! Component: 200 - total flux cleaned = 0.00905623 Jy ! Total flux subtracted in 200 components = 0.00905623 Jy ! Clean residual min=-0.010052 max=0.012413 Jy/beam ! Clean residual mean=-0.000014 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 1.71694 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 138 components and 1.71694 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.18 mas, bpa=-4.769 degrees ! Estimated noise=3013.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501264 Jy ! Component: 100 - total flux cleaned = 0.00185941 Jy ! Component: 150 - total flux cleaned = 0.00332862 Jy ! Component: 200 - total flux cleaned = 0.00433736 Jy ! Total flux subtracted in 200 components = 0.00433736 Jy ! Clean residual min=-0.008244 max=0.010689 Jy/beam ! Clean residual mean=-0.000005 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 1.72128 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 156 components and 1.72128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091279Jy sigma=0.000618 ! Fit after self-cal, rms=0.091012Jy sigma=0.000616 wmodel J1911-2006_S_2017_03_23_pus_map.mod ! Writing 156 model components to file: J1911-2006_S_2017_03_23_pus_map.mod wobs J1911-2006_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1911-2006_S_2017_03_23_pus_uvs.fits wwins J1911-2006_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J1911-2006_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649962 Jy ! Component: 100 - total flux cleaned = -1.7022e-05 Jy ! Component: 150 - total flux cleaned = -0.000751073 Jy ! Component: 200 - total flux cleaned = -0.00133065 Jy ! Component: 250 - total flux cleaned = -0.00188089 Jy ! Component: 300 - total flux cleaned = -0.00230259 Jy ! Component: 350 - total flux cleaned = -0.00270647 Jy ! Component: 400 - total flux cleaned = -0.00319559 Jy ! Component: 450 - total flux cleaned = -0.0036681 Jy ! Component: 500 - total flux cleaned = -0.00412651 Jy ! Component: 550 - total flux cleaned = -0.00430321 Jy ! Component: 600 - total flux cleaned = -0.0046461 Jy ! Component: 650 - total flux cleaned = -0.00456241 Jy ! Component: 700 - total flux cleaned = -0.00472524 Jy ! Component: 750 - total flux cleaned = -0.00464432 Jy ! Component: 800 - total flux cleaned = -0.00448869 Jy ! Component: 850 - total flux cleaned = -0.00456392 Jy ! Component: 900 - total flux cleaned = -0.00456322 Jy ! Component: 950 - total flux cleaned = -0.00485029 Jy ! Component: 1000 - total flux cleaned = -0.00484883 Jy ! Component: 1050 - total flux cleaned = -0.00477835 Jy ! Component: 1100 - total flux cleaned = -0.00457593 Jy ! Component: 1150 - total flux cleaned = -0.00451161 Jy ! Component: 1200 - total flux cleaned = -0.00444641 Jy ! Component: 1250 - total flux cleaned = -0.00406325 Jy ! Component: 1300 - total flux cleaned = -0.00381437 Jy ! Component: 1350 - total flux cleaned = -0.00369258 Jy ! Component: 1400 - total flux cleaned = -0.00357181 Jy ! Component: 1450 - total flux cleaned = -0.00339323 Jy ! Component: 1500 - total flux cleaned = -0.00304292 Jy ! Component: 1550 - total flux cleaned = -0.00286947 Jy ! Component: 1600 - total flux cleaned = -0.00247305 Jy ! Component: 1650 - total flux cleaned = -0.00230563 Jy ! Component: 1700 - total flux cleaned = -0.0021403 Jy ! Component: 1750 - total flux cleaned = -0.00186853 Jy ! Component: 1800 - total flux cleaned = -0.00165555 Jy ! Component: 1850 - total flux cleaned = -0.0013928 Jy ! Component: 1900 - total flux cleaned = -0.00118496 Jy ! Component: 1950 - total flux cleaned = -0.000877268 Jy ! Component: 2000 - total flux cleaned = -0.000674001 Jy ! Component: 2050 - total flux cleaned = -0.000424243 Jy ! Component: 2100 - total flux cleaned = -0.000374839 Jy ! Component: 2150 - total flux cleaned = -0.000179096 Jy ! Component: 2200 - total flux cleaned = 0.00011032 Jy ! Component: 2250 - total flux cleaned = 0.000443151 Jy ! Component: 2300 - total flux cleaned = 0.000724068 Jy ! Component: 2350 - total flux cleaned = 0.000909697 Jy ! Component: 2400 - total flux cleaned = 0.00127742 Jy ! Component: 2450 - total flux cleaned = 0.00159428 Jy ! Component: 2500 - total flux cleaned = 0.00159415 Jy ! Component: 2550 - total flux cleaned = 0.00186154 Jy ! Component: 2600 - total flux cleaned = 0.00216851 Jy ! Component: 2650 - total flux cleaned = 0.00242846 Jy ! Component: 2700 - total flux cleaned = 0.00260006 Jy ! Component: 2750 - total flux cleaned = 0.00268461 Jy ! Component: 2800 - total flux cleaned = 0.00289589 Jy ! Component: 2850 - total flux cleaned = 0.00306277 Jy ! Component: 2900 - total flux cleaned = 0.00335212 Jy ! Component: 2950 - total flux cleaned = 0.00339311 Jy ! Component: 3000 - total flux cleaned = 0.00347452 Jy ! Component: 3050 - total flux cleaned = 0.00367573 Jy ! Component: 3100 - total flux cleaned = 0.00375565 Jy ! Component: 3150 - total flux cleaned = 0.00395291 Jy ! Component: 3200 - total flux cleaned = 0.00414802 Jy ! Component: 3250 - total flux cleaned = 0.00410911 Jy ! Component: 3300 - total flux cleaned = 0.00426262 Jy ! Component: 3350 - total flux cleaned = 0.00414798 Jy ! Component: 3400 - total flux cleaned = 0.00414839 Jy ! Component: 3450 - total flux cleaned = 0.00422353 Jy ! Component: 3500 - total flux cleaned = 0.00433533 Jy ! Component: 3550 - total flux cleaned = 0.00422332 Jy ! Component: 3600 - total flux cleaned = 0.00426018 Jy ! Component: 3650 - total flux cleaned = 0.00426027 Jy ! Component: 3700 - total flux cleaned = 0.00429622 Jy ! Component: 3750 - total flux cleaned = 0.00422405 Jy ! Component: 3800 - total flux cleaned = 0.00429568 Jy ! Component: 3850 - total flux cleaned = 0.00425991 Jy ! Component: 3900 - total flux cleaned = 0.0042248 Jy ! Component: 3950 - total flux cleaned = 0.00426017 Jy ! Component: 4000 - total flux cleaned = 0.00419081 Jy ! Component: 4050 - total flux cleaned = 0.00426022 Jy ! Total flux subtracted in 4096 components = 0.00419137 Jy ! Clean residual min=-0.002252 max=0.001953 Jy/beam ! Clean residual mean=-0.000006 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 1.72547 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 430 components and 1.72547 Jy ![Exited script file: muppet] wmap "J1911-2006_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 8.18 at -4.769 degrees (North through East) ! Clean map min=-0.011096 max=1.3013 Jy/beam ! Writing clean map to FITS file: J1911-2006_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.30128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000566165 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.130525 0.130525 0.26105 0.5221 1.0442 2.0884 4.1768 8.35361 16.7072 33.4144 66.8289 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.301 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 8.18 at -4.769 degrees (North through East) ! Clean map min=-0.011096 max=1.3013 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1911-2006_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:07:34 2019