! Started logfile: J1909-2139_S_2017_08_12_pus_uvs.log on Fri May 10 15:05:43 2019 obs J1909-2139_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1909-2139_S_2017_08_12_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781324 visibilities/baseline/integration-bin. ! Found source: J1909-2139 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1909-2139_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 198 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 676 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.907389Jy sigma=0.006529 ! Fit after self-cal, rms=0.887374Jy sigma=0.006390 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.406 mas, bmaj=6.5 mas, bpa=-2.881 degrees ! Estimated noise=1429.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0868401 Jy ! Component: 100 - total flux cleaned = 0.109054 Jy ! Total flux subtracted in 100 components = 0.109054 Jy ! Clean residual min=-0.007213 max=0.010715 Jy/beam ! Clean residual mean=-0.000073 rms=0.002260 Jy/beam ! Combined flux in latest and established models = 0.109054 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.109054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103046Jy sigma=0.000710 ! Fit after self-cal, rms=0.103029Jy sigma=0.000709 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=7.423 mas, bpa=-3.19 degrees ! Estimated noise=1049.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176126 Jy ! Component: 100 - total flux cleaned = 0.0267919 Jy ! Component: 150 - total flux cleaned = 0.0321255 Jy ! Component: 200 - total flux cleaned = 0.0352533 Jy ! Total flux subtracted in 200 components = 0.0352533 Jy ! Clean residual min=-0.006678 max=0.011052 Jy/beam ! Clean residual mean=-0.000091 rms=0.002338 Jy/beam ! Combined flux in latest and established models = 0.144307 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.144307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100419Jy sigma=0.000685 ! Fit after self-cal, rms=0.100399Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.00* HN 1.05 KP 1.01 ! LA 0.90 MK 1.03 NL 0.98 OV 1.06 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.12 KP 1.01 ! LA 0.86 MK 1.01 NL 1.12 OV 1.05 ! PT 0.89 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.00* HN 1.09 KP 0.96 ! LA 0.89 MK 1.07 NL 1.04 OV 1.01 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.100399Jy sigma=0.000685 ! Fit after self-cal, rms=0.104472Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.798 mas, bmaj=7.499 mas, bpa=-1.887 degrees ! Estimated noise=1058.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104688 Jy ! Component: 100 - total flux cleaned = 0.0158366 Jy ! Component: 150 - total flux cleaned = 0.0190912 Jy ! Component: 200 - total flux cleaned = 0.0204362 Jy ! Total flux subtracted in 200 components = 0.0204362 Jy ! Clean residual min=-0.003964 max=0.005567 Jy/beam ! Clean residual mean=-0.000016 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.164743 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 62 components and 0.164743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103520Jy sigma=0.000672 ! Fit after self-cal, rms=0.103625Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103625Jy sigma=0.000670 ! Fit after self-cal, rms=0.102959Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.8 mas, bmaj=7.487 mas, bpa=-1.711 degrees ! Estimated noise=1046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035057 Jy ! Component: 100 - total flux cleaned = 0.00571541 Jy ! Component: 150 - total flux cleaned = 0.00618423 Jy ! Component: 200 - total flux cleaned = 0.00647134 Jy ! Total flux subtracted in 200 components = 0.00647134 Jy ! Clean residual min=-0.003733 max=0.004537 Jy/beam ! Clean residual mean=-0.000007 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.171215 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.171215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102820Jy sigma=0.000669 ! Fit after self-cal, rms=0.102812Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (71, -100). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302956 Jy ! Component: 100 - total flux cleaned = 0.00390281 Jy ! Component: 150 - total flux cleaned = 0.00440029 Jy ! Component: 200 - total flux cleaned = 0.00456028 Jy ! Total flux subtracted in 200 components = 0.00456028 Jy ! Clean residual min=-0.003486 max=0.003487 Jy/beam ! Clean residual mean=-0.000006 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.175775 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.175775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102650Jy sigma=0.000667 ! Fit after self-cal, rms=0.102605Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102605Jy sigma=0.000667 ! Fit after self-cal, rms=0.102919Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=7.509 mas, bpa=-1.897 degrees ! Estimated noise=1042.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179136 Jy ! Component: 100 - total flux cleaned = 0.00260493 Jy ! Component: 150 - total flux cleaned = 0.00281748 Jy ! Component: 200 - total flux cleaned = 0.00293362 Jy ! Total flux subtracted in 200 components = 0.00293362 Jy ! Clean residual min=-0.003504 max=0.003350 Jy/beam ! Clean residual mean=-0.000003 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.178709 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 119 components and 0.178709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102867Jy sigma=0.000665 ! Fit after self-cal, rms=0.102883Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000514972 Jy ! Component: 100 - total flux cleaned = 0.000695801 Jy ! Component: 150 - total flux cleaned = 0.000797516 Jy ! Component: 200 - total flux cleaned = 0.000894365 Jy ! Total flux subtracted in 200 components = 0.000894365 Jy ! Clean residual min=-0.003419 max=0.003183 Jy/beam ! Clean residual mean=-0.000002 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.179603 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 132 components and 0.179603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102859Jy sigma=0.000665 ! Fit after self-cal, rms=0.102855Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102855Jy sigma=0.000665 ! Fit after self-cal, rms=0.102834Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.144 mas, bmaj=17.67 mas, bpa=0.1107 degrees ! Estimated noise=1367.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022157 Jy ! Component: 100 - total flux cleaned = 0.00275944 Jy ! Component: 150 - total flux cleaned = 0.00293173 Jy ! Component: 200 - total flux cleaned = 0.00303129 Jy ! Total flux subtracted in 200 components = 0.00303129 Jy ! Clean residual min=-0.004224 max=0.004139 Jy/beam ! Clean residual mean=-0.000004 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.182634 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 138 components and 0.182634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102822Jy sigma=0.000665 ! Fit after self-cal, rms=0.102796Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.17145e-05 Jy ! Component: 100 - total flux cleaned = 0.000145433 Jy ! Component: 150 - total flux cleaned = 0.000192917 Jy ! Component: 200 - total flux cleaned = 0.000234438 Jy ! Total flux subtracted in 200 components = 0.000234438 Jy ! Clean residual min=-0.004075 max=0.004030 Jy/beam ! Clean residual mean=-0.000004 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.182869 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 141 components and 0.182869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102806Jy sigma=0.000665 ! Fit after self-cal, rms=0.102787Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=7.513 mas, bpa=-1.894 degrees ! Estimated noise=1043.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.808 x 7.513 at -1.894 degrees (North through East) ! Clean map min=-0.0033131 max=0.11508 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.445 mas, bmaj=6.514 mas, bpa=-1.79 degrees ! Estimated noise=1462.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0870778 Jy ! Component: 100 - total flux cleaned = 0.110534 Jy ! Component: 150 - total flux cleaned = 0.12342 Jy ! Component: 200 - total flux cleaned = 0.132533 Jy ! Total flux subtracted in 200 components = 0.132533 Jy ! Clean residual min=-0.005520 max=0.007371 Jy/beam ! Clean residual mean=-0.000033 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.132533 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.132533 Jy ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=7.513 mas, bpa=-1.894 degrees ! Estimated noise=1043.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105543 Jy ! Component: 100 - total flux cleaned = 0.0181448 Jy ! Component: 150 - total flux cleaned = 0.0241201 Jy ! Component: 200 - total flux cleaned = 0.0289341 Jy ! Total flux subtracted in 200 components = 0.0289341 Jy ! Clean residual min=-0.003813 max=0.004115 Jy/beam ! Clean residual mean=-0.000029 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.161467 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 73 components and 0.161467 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.144 mas, bmaj=17.67 mas, bpa=0.1107 degrees ! Estimated noise=1367.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00782888 Jy ! Component: 100 - total flux cleaned = 0.0125056 Jy ! Component: 150 - total flux cleaned = 0.0156666 Jy ! Component: 200 - total flux cleaned = 0.0178855 Jy ! Total flux subtracted in 200 components = 0.0178855 Jy ! Clean residual min=-0.004194 max=0.004610 Jy/beam ! Clean residual mean=-0.000016 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.179353 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000951854 Jy ! Component: 100 - total flux cleaned = 0.00158142 Jy ! Component: 150 - total flux cleaned = 0.00198251 Jy ! Component: 200 - total flux cleaned = 0.00234219 Jy ! Total flux subtracted in 200 components = 0.00234219 Jy ! Clean residual min=-0.003994 max=0.004199 Jy/beam ! Clean residual mean=-0.000009 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.181695 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 149 components and 0.181695 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=7.513 mas, bpa=-1.894 degrees ! Estimated noise=1043.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465496 Jy ! Component: 100 - total flux cleaned = 0.000699881 Jy ! Component: 150 - total flux cleaned = 0.000758659 Jy ! Component: 200 - total flux cleaned = 0.000754149 Jy ! Total flux subtracted in 200 components = 0.000754149 Jy ! Clean residual min=-0.003602 max=0.002999 Jy/beam ! Clean residual mean=-0.000002 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.182449 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 165 components and 0.182449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102752Jy sigma=0.000665 ! Fit after self-cal, rms=0.102712Jy sigma=0.000665 wmodel J1909-2139_S_2017_08_12_pus_map.mod ! Writing 165 model components to file: J1909-2139_S_2017_08_12_pus_map.mod wobs J1909-2139_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1909-2139_S_2017_08_12_pus_uvs.fits wwins J1909-2139_S_2017_08_12_pus_map.win ! wwins: Wrote 4 windows to J1909-2139_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00147522 Jy ! Component: 100 - total flux cleaned = -0.00189379 Jy ! Component: 150 - total flux cleaned = -0.00180202 Jy ! Component: 200 - total flux cleaned = -0.00175653 Jy ! Component: 250 - total flux cleaned = -0.00158816 Jy ! Component: 300 - total flux cleaned = -0.00122548 Jy ! Component: 350 - total flux cleaned = -0.000991217 Jy ! Component: 400 - total flux cleaned = -0.000801763 Jy ! Component: 450 - total flux cleaned = -0.000801255 Jy ! Component: 500 - total flux cleaned = -0.000693511 Jy ! Component: 550 - total flux cleaned = -0.000658225 Jy ! Component: 600 - total flux cleaned = -0.000556385 Jy ! Component: 650 - total flux cleaned = -0.000489777 Jy ! Component: 700 - total flux cleaned = -0.000297227 Jy ! Component: 750 - total flux cleaned = -0.000265737 Jy ! Component: 800 - total flux cleaned = -0.000141371 Jy ! Component: 850 - total flux cleaned = -2.06058e-05 Jy ! Component: 900 - total flux cleaned = -4.94147e-05 Jy ! Component: 950 - total flux cleaned = 6.72064e-05 Jy ! Component: 1000 - total flux cleaned = 0.000152102 Jy ! Component: 1050 - total flux cleaned = 0.000179583 Jy ! Component: 1100 - total flux cleaned = 0.000206974 Jy ! Component: 1150 - total flux cleaned = 0.000233969 Jy ! Component: 1200 - total flux cleaned = 0.00026059 Jy ! Component: 1250 - total flux cleaned = 0.000312272 Jy ! Component: 1300 - total flux cleaned = 0.00010898 Jy ! Component: 1350 - total flux cleaned = 0.000184744 Jy ! Component: 1400 - total flux cleaned = 0.000159975 Jy ! Component: 1450 - total flux cleaned = 8.77902e-05 Jy ! Component: 1500 - total flux cleaned = 0.000112017 Jy ! Component: 1550 - total flux cleaned = 8.79772e-05 Jy ! Component: 1600 - total flux cleaned = -4.78829e-06 Jy ! Component: 1650 - total flux cleaned = -4.38713e-06 Jy ! Component: 1700 - total flux cleaned = -9.40811e-05 Jy ! Component: 1750 - total flux cleaned = -4.99996e-05 Jy ! Component: 1800 - total flux cleaned = -0.000180984 Jy ! Component: 1850 - total flux cleaned = -0.000116051 Jy ! Component: 1900 - total flux cleaned = -9.48314e-05 Jy ! Component: 1950 - total flux cleaned = -0.000158319 Jy ! Component: 2000 - total flux cleaned = -0.000158215 Jy ! Component: 2050 - total flux cleaned = -0.000158115 Jy ! Component: 2100 - total flux cleaned = -0.00011752 Jy ! Component: 2150 - total flux cleaned = -0.00011778 Jy ! Component: 2200 - total flux cleaned = -0.000118126 Jy ! Component: 2250 - total flux cleaned = -9.85482e-05 Jy ! Component: 2300 - total flux cleaned = -0.000194669 Jy ! Component: 2350 - total flux cleaned = -0.000232464 Jy ! Component: 2400 - total flux cleaned = -0.000176027 Jy ! Component: 2450 - total flux cleaned = -0.000269056 Jy ! Component: 2500 - total flux cleaned = -0.000250636 Jy ! Component: 2550 - total flux cleaned = -0.000323682 Jy ! Component: 2600 - total flux cleaned = -0.000377556 Jy ! Component: 2650 - total flux cleaned = -0.000448593 Jy ! Component: 2700 - total flux cleaned = -0.000483602 Jy ! Component: 2750 - total flux cleaned = -0.000587536 Jy ! Component: 2800 - total flux cleaned = -0.000655948 Jy ! Component: 2850 - total flux cleaned = -0.000689629 Jy ! Component: 2900 - total flux cleaned = -0.000739936 Jy ! Component: 2950 - total flux cleaned = -0.000756646 Jy ! Component: 3000 - total flux cleaned = -0.000855505 Jy ! Component: 3050 - total flux cleaned = -0.000888069 Jy ! Component: 3100 - total flux cleaned = -0.000936516 Jy ! Component: 3150 - total flux cleaned = -0.00100058 Jy ! Component: 3200 - total flux cleaned = -0.00104811 Jy ! Component: 3250 - total flux cleaned = -0.00111079 Jy ! Component: 3300 - total flux cleaned = -0.00118832 Jy ! Component: 3350 - total flux cleaned = -0.00115785 Jy ! Component: 3400 - total flux cleaned = -0.00126484 Jy ! Component: 3450 - total flux cleaned = -0.0013707 Jy ! Component: 3500 - total flux cleaned = -0.00140076 Jy ! Component: 3550 - total flux cleaned = -0.00149022 Jy ! Component: 3600 - total flux cleaned = -0.00153421 Jy ! Component: 3650 - total flux cleaned = -0.00156356 Jy ! Component: 3700 - total flux cleaned = -0.00163623 Jy ! Component: 3750 - total flux cleaned = -0.00173691 Jy ! Component: 3800 - total flux cleaned = -0.00177973 Jy ! Component: 3850 - total flux cleaned = -0.00179383 Jy ! Component: 3900 - total flux cleaned = -0.0018361 Jy ! Component: 3950 - total flux cleaned = -0.00190592 Jy ! Component: 4000 - total flux cleaned = -0.00193371 Jy ! Component: 4050 - total flux cleaned = -0.00196114 Jy ! Total flux subtracted in 4096 components = -0.00197459 Jy ! Clean residual min=-0.000757 max=0.000763 Jy/beam ! Clean residual mean=-0.000001 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.180475 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 434 components and 0.180475 Jy ![Exited script file: muppet] wmap "J1909-2139_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.808 x 7.513 at -1.894 degrees (North through East) ! Clean map min=-0.0023429 max=0.11764 Jy/beam ! Writing clean map to FITS file: J1909-2139_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117642 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237868 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.60659 0.60659 1.21318 2.42636 4.85272 9.70544 19.4109 38.8218 77.6435 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.808 x 7.513 at -1.894 degrees (North through East) ! Clean map min=-0.0023429 max=0.11764 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1909-2139_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:05:48 2019