! Started logfile: J1902-0458_S_2017_10_09_pus_uvs.log on Sun May 12 13:18:42 2019 obs J1902-0458_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1902-0458_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.628502 visibilities/baseline/integration-bin. ! Found source: J1902-0458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 10408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1902-0458_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 592 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984853Jy sigma=0.008212 ! Fit after self-cal, rms=0.944805Jy sigma=0.007882 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=13.95 mas, bpa=-19.02 degrees ! Estimated noise=1357.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0404039 Jy ! Component: 100 - total flux cleaned = 0.0509918 Jy ! Total flux subtracted in 100 components = 0.0509918 Jy ! Clean residual min=-0.004587 max=0.005697 Jy/beam ! Clean residual mean=0.000016 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.0509918 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0509918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084527Jy sigma=0.000649 ! Fit after self-cal, rms=0.083895Jy sigma=0.000644 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=16.83 mas, bpa=-18.78 degrees ! Estimated noise=983.289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00972588 Jy ! Component: 100 - total flux cleaned = 0.0143359 Jy ! Component: 150 - total flux cleaned = 0.0170184 Jy ! Component: 200 - total flux cleaned = 0.0187776 Jy ! Total flux subtracted in 200 components = 0.0187776 Jy ! Clean residual min=-0.002841 max=0.003459 Jy/beam ! Clean residual mean=0.000019 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.0697694 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 42 components and 0.0697694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082715Jy sigma=0.000635 ! Fit after self-cal, rms=0.082637Jy sigma=0.000634 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.00 KP 1.04 ! LA 1.01 MK 1.26 NL 0.94 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.08 KP 0.96 ! LA 0.96 MK 1.15 NL 1.02 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.04 KP 0.88 ! LA 0.81 MK 1.13 NL 1.27 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.80 KP 1.00* ! LA 0.76 MK 0.67 NL 1.00* OV 1.00* ! PT 0.96 ! ! ! Fit before self-cal, rms=0.082637Jy sigma=0.000634 ! Fit after self-cal, rms=0.080028Jy sigma=0.000632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=16.86 mas, bpa=-18.56 degrees ! Estimated noise=983.333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581821 Jy ! Component: 100 - total flux cleaned = 0.000755762 Jy ! Component: 150 - total flux cleaned = 0.000869928 Jy ! Component: 200 - total flux cleaned = 0.000945077 Jy ! Total flux subtracted in 200 components = 0.000945077 Jy ! Clean residual min=-0.002583 max=0.002353 Jy/beam ! Clean residual mean=0.000009 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0707145 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.0707145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080005Jy sigma=0.000632 ! Fit after self-cal, rms=0.079921Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079921Jy sigma=0.000631 ! Fit after self-cal, rms=0.080729Jy sigma=0.000629 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.748 mas, bmaj=16.93 mas, bpa=-18.75 degrees ! Estimated noise=983.339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000592922 Jy ! Component: 100 - total flux cleaned = 0.000570276 Jy ! Component: 150 - total flux cleaned = 0.000549602 Jy ! Component: 200 - total flux cleaned = 0.000550408 Jy ! Total flux subtracted in 200 components = 0.000550408 Jy ! Clean residual min=-0.002077 max=0.002388 Jy/beam ! Clean residual mean=0.000004 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0712649 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.0712649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080717Jy sigma=0.000629 ! Fit after self-cal, rms=0.080806Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (73.5, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196905 Jy ! Component: 100 - total flux cleaned = 0.00222303 Jy ! Component: 150 - total flux cleaned = 0.00234942 Jy ! Component: 200 - total flux cleaned = 0.00242564 Jy ! Total flux subtracted in 200 components = 0.00242564 Jy ! Clean residual min=-0.001820 max=0.001798 Jy/beam ! Clean residual mean=0.000005 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0736906 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.0736906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080733Jy sigma=0.000628 ! Fit after self-cal, rms=0.080698Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080698Jy sigma=0.000628 ! Fit after self-cal, rms=0.081053Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=16.92 mas, bpa=-18.82 degrees ! Estimated noise=980.789 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128027 Jy ! Component: 100 - total flux cleaned = 0.00145621 Jy ! Component: 150 - total flux cleaned = 0.00153122 Jy ! Component: 200 - total flux cleaned = 0.00163731 Jy ! Total flux subtracted in 200 components = 0.00163731 Jy ! Clean residual min=-0.001816 max=0.001744 Jy/beam ! Clean residual mean=0.000004 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0753279 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.0753279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081006Jy sigma=0.000628 ! Fit after self-cal, rms=0.081012Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460072 Jy ! Component: 100 - total flux cleaned = 0.000493856 Jy ! Component: 150 - total flux cleaned = 0.000493561 Jy ! Component: 200 - total flux cleaned = 0.000554859 Jy ! Total flux subtracted in 200 components = 0.000554859 Jy ! Clean residual min=-0.001783 max=0.001770 Jy/beam ! Clean residual mean=0.000004 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0758827 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.0758828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080980Jy sigma=0.000627 ! Fit after self-cal, rms=0.080968Jy sigma=0.000627 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080968Jy sigma=0.000627 ! Fit after self-cal, rms=0.081123Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.636 mas, bmaj=18.24 mas, bpa=-18.32 degrees ! Estimated noise=1145.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176829 Jy ! Component: 100 - total flux cleaned = 0.000283217 Jy ! Component: 150 - total flux cleaned = 0.000338956 Jy ! Component: 200 - total flux cleaned = 0.000356314 Jy ! Total flux subtracted in 200 components = 0.000356314 Jy ! Clean residual min=-0.002266 max=0.001751 Jy/beam ! Clean residual mean=0.000006 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0762391 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 121 components and 0.0762391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081111Jy sigma=0.000627 ! Fit after self-cal, rms=0.081120Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101804 Jy ! Component: 100 - total flux cleaned = 0.000101563 Jy ! Component: 150 - total flux cleaned = 6.90298e-05 Jy ! Component: 200 - total flux cleaned = 3.90696e-05 Jy ! Total flux subtracted in 200 components = 3.90696e-05 Jy ! Clean residual min=-0.002231 max=0.001777 Jy/beam ! Clean residual mean=0.000005 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0762781 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 0.0762781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081112Jy sigma=0.000627 ! Fit after self-cal, rms=0.081107Jy sigma=0.000627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=16.88 mas, bpa=-18.88 degrees ! Estimated noise=980.542 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.74 x 16.88 at -18.88 degrees (North through East) ! Clean map min=-0.0017363 max=0.055786 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.643 mas, bmaj=14.13 mas, bpa=-18.94 degrees ! Estimated noise=1356.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403667 Jy ! Component: 100 - total flux cleaned = 0.0516283 Jy ! Component: 150 - total flux cleaned = 0.0580436 Jy ! Component: 200 - total flux cleaned = 0.0614896 Jy ! Total flux subtracted in 200 components = 0.0614896 Jy ! Clean residual min=-0.003886 max=0.003664 Jy/beam ! Clean residual mean=0.000014 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.0614896 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0614896 Jy ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=16.88 mas, bpa=-18.88 degrees ! Estimated noise=980.542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00548214 Jy ! Component: 100 - total flux cleaned = 0.0084357 Jy ! Component: 150 - total flux cleaned = 0.0101586 Jy ! Component: 200 - total flux cleaned = 0.011046 Jy ! Total flux subtracted in 200 components = 0.011046 Jy ! Clean residual min=-0.002185 max=0.002137 Jy/beam ! Clean residual mean=0.000011 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0725356 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 75 components and 0.0725356 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.636 mas, bmaj=18.24 mas, bpa=-18.32 degrees ! Estimated noise=1145.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140387 Jy ! Component: 100 - total flux cleaned = 0.00219796 Jy ! Component: 150 - total flux cleaned = 0.0026863 Jy ! Component: 200 - total flux cleaned = 0.0030325 Jy ! Total flux subtracted in 200 components = 0.0030325 Jy ! Clean residual min=-0.002233 max=0.001836 Jy/beam ! Clean residual mean=0.000009 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0755681 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021003 Jy ! Component: 100 - total flux cleaned = 0.000394674 Jy ! Component: 150 - total flux cleaned = 0.000467155 Jy ! Component: 200 - total flux cleaned = 0.000512771 Jy ! Total flux subtracted in 200 components = 0.000512771 Jy ! Clean residual min=-0.002189 max=0.001810 Jy/beam ! Clean residual mean=0.000007 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0760809 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 134 components and 0.0760808 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=16.88 mas, bpa=-18.88 degrees ! Estimated noise=980.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.43146e-05 Jy ! Component: 100 - total flux cleaned = -0.000158467 Jy ! Component: 150 - total flux cleaned = -0.000282853 Jy ! Component: 200 - total flux cleaned = -0.000245906 Jy ! Total flux subtracted in 200 components = -0.000245906 Jy ! Clean residual min=-0.001766 max=0.001841 Jy/beam ! Clean residual mean=0.000004 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0758349 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 152 components and 0.0758349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081123Jy sigma=0.000627 ! Fit after self-cal, rms=0.081116Jy sigma=0.000627 wmodel J1902-0458_S_2017_10_09_pus_map.mod ! Writing 152 model components to file: J1902-0458_S_2017_10_09_pus_map.mod wobs J1902-0458_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1902-0458_S_2017_10_09_pus_uvs.fits wwins J1902-0458_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1902-0458_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.79877e-05 Jy ! Component: 100 - total flux cleaned = 5.70508e-05 Jy ! Component: 150 - total flux cleaned = 0.000197249 Jy ! Component: 200 - total flux cleaned = 0.000276441 Jy ! Component: 250 - total flux cleaned = 0.000376527 Jy ! Component: 300 - total flux cleaned = 0.000471503 Jy ! Component: 350 - total flux cleaned = 0.000540208 Jy ! Component: 400 - total flux cleaned = 0.000584251 Jy ! Component: 450 - total flux cleaned = 0.000583787 Jy ! Component: 500 - total flux cleaned = 0.000604731 Jy ! Component: 550 - total flux cleaned = 0.000645226 Jy ! Component: 600 - total flux cleaned = 0.000664274 Jy ! Component: 650 - total flux cleaned = 0.000664037 Jy ! Component: 700 - total flux cleaned = 0.000682977 Jy ! Component: 750 - total flux cleaned = 0.000738132 Jy ! Component: 800 - total flux cleaned = 0.000702529 Jy ! Component: 850 - total flux cleaned = 0.000685627 Jy ! Component: 900 - total flux cleaned = 0.000616939 Jy ! Component: 950 - total flux cleaned = 0.000668137 Jy ! Component: 1000 - total flux cleaned = 0.000685054 Jy ! Component: 1050 - total flux cleaned = 0.000685323 Jy ! Component: 1100 - total flux cleaned = 0.00070151 Jy ! Component: 1150 - total flux cleaned = 0.000749481 Jy ! Component: 1200 - total flux cleaned = 0.000796434 Jy ! Component: 1250 - total flux cleaned = 0.00082728 Jy ! Component: 1300 - total flux cleaned = 0.000903296 Jy ! Component: 1350 - total flux cleaned = 0.000963371 Jy ! Component: 1400 - total flux cleaned = 0.00103731 Jy ! Component: 1450 - total flux cleaned = 0.00112469 Jy ! Component: 1500 - total flux cleaned = 0.00121097 Jy ! Component: 1550 - total flux cleaned = 0.00125332 Jy ! Component: 1600 - total flux cleaned = 0.00129534 Jy ! Component: 1650 - total flux cleaned = 0.00137852 Jy ! Component: 1700 - total flux cleaned = 0.00141955 Jy ! Component: 1750 - total flux cleaned = 0.00146013 Jy ! Component: 1800 - total flux cleaned = 0.00150034 Jy ! Component: 1850 - total flux cleaned = 0.00154008 Jy ! Component: 1900 - total flux cleaned = 0.00157923 Jy ! Component: 1950 - total flux cleaned = 0.00163106 Jy ! Component: 2000 - total flux cleaned = 0.0016952 Jy ! Component: 2050 - total flux cleaned = 0.00172057 Jy ! Component: 2100 - total flux cleaned = 0.00177088 Jy ! Component: 2150 - total flux cleaned = 0.00187021 Jy ! Component: 2200 - total flux cleaned = 0.00189499 Jy ! Component: 2250 - total flux cleaned = 0.00195583 Jy ! Component: 2300 - total flux cleaned = 0.00200407 Jy ! Component: 2350 - total flux cleaned = 0.00207595 Jy ! Component: 2400 - total flux cleaned = 0.00212331 Jy ! Component: 2450 - total flux cleaned = 0.00219379 Jy ! Component: 2500 - total flux cleaned = 0.00221716 Jy ! Component: 2550 - total flux cleaned = 0.00229797 Jy ! Component: 2600 - total flux cleaned = 0.00234363 Jy ! Component: 2650 - total flux cleaned = 0.00238902 Jy ! Component: 2700 - total flux cleaned = 0.00247919 Jy ! Component: 2750 - total flux cleaned = 0.00255724 Jy ! Component: 2800 - total flux cleaned = 0.00261268 Jy ! Component: 2850 - total flux cleaned = 0.00267875 Jy ! Component: 2900 - total flux cleaned = 0.00278764 Jy ! Component: 2950 - total flux cleaned = 0.00282005 Jy ! Component: 3000 - total flux cleaned = 0.00289504 Jy ! Component: 3050 - total flux cleaned = 0.00296955 Jy ! Component: 3100 - total flux cleaned = 0.00299069 Jy ! Component: 3150 - total flux cleaned = 0.00311666 Jy ! Component: 3200 - total flux cleaned = 0.00315816 Jy ! Component: 3250 - total flux cleaned = 0.00324072 Jy ! Component: 3300 - total flux cleaned = 0.00329199 Jy ! Component: 3350 - total flux cleaned = 0.00330221 Jy ! Component: 3400 - total flux cleaned = 0.00333266 Jy ! Component: 3450 - total flux cleaned = 0.00339292 Jy ! Component: 3500 - total flux cleaned = 0.00342278 Jy ! Component: 3550 - total flux cleaned = 0.00345265 Jy ! Component: 3600 - total flux cleaned = 0.00349218 Jy ! Component: 3650 - total flux cleaned = 0.00354108 Jy ! Component: 3700 - total flux cleaned = 0.00357027 Jy ! Component: 3750 - total flux cleaned = 0.00362821 Jy ! Component: 3800 - total flux cleaned = 0.00366659 Jy ! Component: 3850 - total flux cleaned = 0.00372371 Jy ! Component: 3900 - total flux cleaned = 0.00373322 Jy ! Component: 3950 - total flux cleaned = 0.00378973 Jy ! Component: 4000 - total flux cleaned = 0.00381779 Jy ! Component: 4050 - total flux cleaned = 0.0038736 Jy ! Total flux subtracted in 4096 components = 0.00392902 Jy ! Clean residual min=-0.000523 max=0.000527 Jy/beam ! Clean residual mean=-0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0797639 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 408 components and 0.0797639 Jy ![Exited script file: muppet] wmap "J1902-0458_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.74 x 16.88 at -18.88 degrees (North through East) ! Clean map min=-0.0015743 max=0.05557 Jy/beam ! Writing clean map to FITS file: J1902-0458_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.05557 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000171504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.925878 0.925878 1.85176 3.70351 7.40703 14.8141 29.6281 59.2562 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.74 x 16.88 at -18.88 degrees (North through East) ! Clean map min=-0.0015743 max=0.05557 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1902-0458_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:47 2019