! Started logfile: J1901-1738_S_2017_10_09_pus_uvs.log on Sun May 12 13:18:29 2019 obs J1901-1738_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1901-1738_S_2017_10_09_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.717687 visibilities/baseline/integration-bin. ! Found source: J1901-1738 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 30384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1901-1738_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 388 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 608 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 388 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1650 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974800Jy sigma=0.007428 ! Fit after self-cal, rms=0.938483Jy sigma=0.007177 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=12.79 mas, bpa=-17.32 degrees ! Estimated noise=1050.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463762 Jy ! Component: 100 - total flux cleaned = 0.058794 Jy ! Total flux subtracted in 100 components = 0.058794 Jy ! Clean residual min=-0.004363 max=0.006056 Jy/beam ! Clean residual mean=-0.000013 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.058794 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.058794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094983Jy sigma=0.000665 ! Fit after self-cal, rms=0.094582Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=15.89 mas, bpa=-17.35 degrees ! Estimated noise=628.388 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01181 Jy ! Component: 100 - total flux cleaned = 0.0182257 Jy ! Component: 150 - total flux cleaned = 0.0221711 Jy ! Component: 200 - total flux cleaned = 0.0248389 Jy ! Total flux subtracted in 200 components = 0.0248389 Jy ! Clean residual min=-0.002758 max=0.003671 Jy/beam ! Clean residual mean=-0.000015 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.0836329 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 88 components and 0.083633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093031Jy sigma=0.000651 ! Fit after self-cal, rms=0.092935Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.90 HN 1.03 KP 1.04 ! LA 0.99 MK 1.06 NL 0.95 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.07 KP 0.99 ! LA 0.92 MK 1.16 NL 1.09 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.05 KP 0.89 ! LA 0.75 MK 1.04 NL 1.24 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 432 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.79 KP 1.00* ! LA 1.00* MK 0.79 NL 1.00* OV 1.00* ! PT 0.89 ! ! ! Fit before self-cal, rms=0.092935Jy sigma=0.000650 ! Fit after self-cal, rms=0.092343Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=16.2 mas, bpa=-17.16 degrees ! Estimated noise=634.834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693755 Jy ! Component: 100 - total flux cleaned = 0.000655 Jy ! Component: 150 - total flux cleaned = 0.00062212 Jy ! Component: 200 - total flux cleaned = 0.000620919 Jy ! Total flux subtracted in 200 components = 0.000620919 Jy ! Clean residual min=-0.001786 max=0.002047 Jy/beam ! Clean residual mean=-0.000006 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0842539 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.0842539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092307Jy sigma=0.000648 ! Fit after self-cal, rms=0.092314Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092314Jy sigma=0.000647 ! Fit after self-cal, rms=0.091791Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=16.26 mas, bpa=-17.33 degrees ! Estimated noise=632.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429197 Jy ! Component: 100 - total flux cleaned = 0.000249758 Jy ! Component: 150 - total flux cleaned = 0.000227584 Jy ! Component: 200 - total flux cleaned = 0.000188142 Jy ! Total flux subtracted in 200 components = 0.000188142 Jy ! Clean residual min=-0.001720 max=0.001990 Jy/beam ! Clean residual mean=-0.000004 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.084442 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 108 components and 0.084442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091776Jy sigma=0.000646 ! Fit after self-cal, rms=0.091764Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010063 Jy ! Component: 100 - total flux cleaned = 3.69243e-05 Jy ! Component: 150 - total flux cleaned = 3.76638e-05 Jy ! Component: 200 - total flux cleaned = 3.71375e-05 Jy ! Total flux subtracted in 200 components = 3.71375e-05 Jy ! Clean residual min=-0.001722 max=0.001948 Jy/beam ! Clean residual mean=-0.000004 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0844792 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 110 components and 0.0844792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091753Jy sigma=0.000646 ! Fit after self-cal, rms=0.091744Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091744Jy sigma=0.000646 ! Fit after self-cal, rms=0.091144Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=16.24 mas, bpa=-17.37 degrees ! Estimated noise=629.663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198981 Jy ! Component: 100 - total flux cleaned = 0.000118318 Jy ! Component: 150 - total flux cleaned = 8.19876e-05 Jy ! Component: 200 - total flux cleaned = 5.07984e-05 Jy ! Total flux subtracted in 200 components = 5.07984e-05 Jy ! Clean residual min=-0.001724 max=0.001890 Jy/beam ! Clean residual mean=-0.000004 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.08453 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 112 components and 0.08453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091135Jy sigma=0.000646 ! Fit after self-cal, rms=0.091123Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.79944e-05 Jy ! Component: 100 - total flux cleaned = 1.40155e-05 Jy ! Component: 150 - total flux cleaned = -1.59684e-06 Jy ! Component: 200 - total flux cleaned = -1.64352e-05 Jy ! Total flux subtracted in 200 components = -1.64352e-05 Jy ! Clean residual min=-0.001712 max=0.001871 Jy/beam ! Clean residual mean=-0.000004 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0845135 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 114 components and 0.0845135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091116Jy sigma=0.000646 ! Fit after self-cal, rms=0.091110Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091110Jy sigma=0.000646 ! Fit after self-cal, rms=0.090638Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.116 mas, bmaj=21.7 mas, bpa=-10.25 degrees ! Estimated noise=750.843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170839 Jy ! Component: 100 - total flux cleaned = 0.000101695 Jy ! Component: 150 - total flux cleaned = 4.6029e-05 Jy ! Component: 200 - total flux cleaned = 1.09791e-05 Jy ! Total flux subtracted in 200 components = 1.09791e-05 Jy ! Clean residual min=-0.001838 max=0.002358 Jy/beam ! Clean residual mean=-0.000009 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0845245 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 127 components and 0.0845245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090637Jy sigma=0.000646 ! Fit after self-cal, rms=0.090623Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.96154e-05 Jy ! Component: 100 - total flux cleaned = 5.86748e-06 Jy ! Component: 150 - total flux cleaned = -3.12311e-05 Jy ! Component: 200 - total flux cleaned = -5.19592e-05 Jy ! Total flux subtracted in 200 components = -5.19592e-05 Jy ! Clean residual min=-0.001798 max=0.002359 Jy/beam ! Clean residual mean=-0.000009 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0844726 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 143 components and 0.0844725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090623Jy sigma=0.000646 ! Fit after self-cal, rms=0.090617Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=16.22 mas, bpa=-17.37 degrees ! Estimated noise=627.055 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 16.22 at -17.37 degrees (North through East) ! Clean map min=-0.0016669 max=0.061594 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=13.12 mas, bpa=-17.17 degrees ! Estimated noise=1073.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.045976 Jy ! Component: 100 - total flux cleaned = 0.0603433 Jy ! Component: 150 - total flux cleaned = 0.0680496 Jy ! Component: 200 - total flux cleaned = 0.0731063 Jy ! Total flux subtracted in 200 components = 0.0731063 Jy ! Clean residual min=-0.003403 max=0.003934 Jy/beam ! Clean residual mean=-0.000006 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.0731063 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0731063 Jy ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=16.22 mas, bpa=-17.37 degrees ! Estimated noise=627.055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518844 Jy ! Component: 100 - total flux cleaned = 0.00821739 Jy ! Component: 150 - total flux cleaned = 0.0101831 Jy ! Component: 200 - total flux cleaned = 0.0115033 Jy ! Total flux subtracted in 200 components = 0.0115033 Jy ! Clean residual min=-0.001816 max=0.001642 Jy/beam ! Clean residual mean=-0.000004 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0846097 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 68 components and 0.0846097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.116 mas, bmaj=21.7 mas, bpa=-10.25 degrees ! Estimated noise=750.843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000932049 Jy ! Component: 100 - total flux cleaned = 0.00105056 Jy ! Component: 150 - total flux cleaned = 0.00112127 Jy ! Component: 200 - total flux cleaned = 0.00122283 Jy ! Total flux subtracted in 200 components = 0.00122283 Jy ! Clean residual min=-0.001684 max=0.001878 Jy/beam ! Clean residual mean=-0.000007 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0858325 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.02941e-05 Jy ! Component: 100 - total flux cleaned = 8.59706e-05 Jy ! Component: 150 - total flux cleaned = 8.60706e-05 Jy ! Component: 200 - total flux cleaned = 8.59625e-05 Jy ! Total flux subtracted in 200 components = 8.59625e-05 Jy ! Clean residual min=-0.001616 max=0.001817 Jy/beam ! Clean residual mean=-0.000006 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0859184 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 106 components and 0.0859184 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=16.22 mas, bpa=-17.37 degrees ! Estimated noise=627.055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176329 Jy ! Component: 100 - total flux cleaned = -0.000226799 Jy ! Component: 150 - total flux cleaned = -0.000227559 Jy ! Component: 200 - total flux cleaned = -0.00022803 Jy ! Total flux subtracted in 200 components = -0.00022803 Jy ! Clean residual min=-0.001575 max=0.001495 Jy/beam ! Clean residual mean=-0.000003 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0856904 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 130 components and 0.0856904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090587Jy sigma=0.000646 ! Fit after self-cal, rms=0.090567Jy sigma=0.000645 wmodel J1901-1738_S_2017_10_09_pus_map.mod ! Writing 130 model components to file: J1901-1738_S_2017_10_09_pus_map.mod wobs J1901-1738_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1901-1738_S_2017_10_09_pus_uvs.fits wwins J1901-1738_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1901-1738_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253233 Jy ! Component: 100 - total flux cleaned = 0.000662568 Jy ! Component: 150 - total flux cleaned = 0.00106877 Jy ! Component: 200 - total flux cleaned = 0.00147845 Jy ! Component: 250 - total flux cleaned = 0.00178377 Jy ! Component: 300 - total flux cleaned = 0.00201504 Jy ! Component: 350 - total flux cleaned = 0.00221829 Jy ! Component: 400 - total flux cleaned = 0.00235604 Jy ! Component: 450 - total flux cleaned = 0.0025282 Jy ! Component: 500 - total flux cleaned = 0.00273228 Jy ! Component: 550 - total flux cleaned = 0.00287682 Jy ! Component: 600 - total flux cleaned = 0.00305344 Jy ! Component: 650 - total flux cleaned = 0.00322548 Jy ! Component: 700 - total flux cleaned = 0.00332659 Jy ! Component: 750 - total flux cleaned = 0.00347533 Jy ! Component: 800 - total flux cleaned = 0.00350785 Jy ! Component: 850 - total flux cleaned = 0.00361958 Jy ! Component: 900 - total flux cleaned = 0.00363544 Jy ! Component: 950 - total flux cleaned = 0.00366644 Jy ! Component: 1000 - total flux cleaned = 0.0037117 Jy ! Component: 1050 - total flux cleaned = 0.003667 Jy ! Component: 1100 - total flux cleaned = 0.00363797 Jy ! Component: 1150 - total flux cleaned = 0.00359496 Jy ! Component: 1200 - total flux cleaned = 0.00362316 Jy ! Component: 1250 - total flux cleaned = 0.00358119 Jy ! Component: 1300 - total flux cleaned = 0.00351291 Jy ! Component: 1350 - total flux cleaned = 0.00349945 Jy ! Component: 1400 - total flux cleaned = 0.00345961 Jy ! Component: 1450 - total flux cleaned = 0.00345952 Jy ! Component: 1500 - total flux cleaned = 0.00344663 Jy ! Component: 1550 - total flux cleaned = 0.00343394 Jy ! Component: 1600 - total flux cleaned = 0.00340883 Jy ! Component: 1650 - total flux cleaned = 0.00338426 Jy ! Component: 1700 - total flux cleaned = 0.00335993 Jy ! Component: 1750 - total flux cleaned = 0.00334791 Jy ! Component: 1800 - total flux cleaned = 0.00334792 Jy ! Component: 1850 - total flux cleaned = 0.00333624 Jy ! Component: 1900 - total flux cleaned = 0.00335918 Jy ! Component: 1950 - total flux cleaned = 0.003325 Jy ! Component: 2000 - total flux cleaned = 0.00331386 Jy ! Component: 2050 - total flux cleaned = 0.00332493 Jy ! Component: 2100 - total flux cleaned = 0.00329217 Jy ! Component: 2150 - total flux cleaned = 0.00329215 Jy ! Component: 2200 - total flux cleaned = 0.00328136 Jy ! Component: 2250 - total flux cleaned = 0.00324964 Jy ! Component: 2300 - total flux cleaned = 0.00321844 Jy ! Component: 2350 - total flux cleaned = 0.00321854 Jy ! Component: 2400 - total flux cleaned = 0.00322876 Jy ! Component: 2450 - total flux cleaned = 0.00317823 Jy ! Component: 2500 - total flux cleaned = 0.0031584 Jy ! Component: 2550 - total flux cleaned = 0.00316817 Jy ! Component: 2600 - total flux cleaned = 0.0031486 Jy ! Component: 2650 - total flux cleaned = 0.00311959 Jy ! Component: 2700 - total flux cleaned = 0.00309097 Jy ! Component: 2750 - total flux cleaned = 0.00303392 Jy ! Component: 2800 - total flux cleaned = 0.00298681 Jy ! Component: 2850 - total flux cleaned = 0.00291227 Jy ! Component: 2900 - total flux cleaned = 0.00284766 Jy ! Component: 2950 - total flux cleaned = 0.00287509 Jy ! Component: 3000 - total flux cleaned = 0.00279338 Jy ! Component: 3050 - total flux cleaned = 0.00273939 Jy ! Component: 3100 - total flux cleaned = 0.00273047 Jy ! Component: 3150 - total flux cleaned = 0.0027039 Jy ! Component: 3200 - total flux cleaned = 0.00264242 Jy ! Component: 3250 - total flux cleaned = 0.00265116 Jy ! Component: 3300 - total flux cleaned = 0.00262529 Jy ! Component: 3350 - total flux cleaned = 0.00261667 Jy ! Component: 3400 - total flux cleaned = 0.00260814 Jy ! Component: 3450 - total flux cleaned = 0.00259114 Jy ! Component: 3500 - total flux cleaned = 0.00256592 Jy ! Component: 3550 - total flux cleaned = 0.00257423 Jy ! Component: 3600 - total flux cleaned = 0.00257416 Jy ! Component: 3650 - total flux cleaned = 0.00250056 Jy ! Component: 3700 - total flux cleaned = 0.00249237 Jy ! Component: 3750 - total flux cleaned = 0.00245204 Jy ! Component: 3800 - total flux cleaned = 0.00239599 Jy ! Component: 3850 - total flux cleaned = 0.00237216 Jy ! Component: 3900 - total flux cleaned = 0.0023326 Jy ! Component: 3950 - total flux cleaned = 0.0023012 Jy ! Component: 4000 - total flux cleaned = 0.00226205 Jy ! Component: 4050 - total flux cleaned = 0.00222319 Jy ! Total flux subtracted in 4096 components = 0.00215359 Jy ! Clean residual min=-0.000436 max=0.000403 Jy/beam ! Clean residual mean=-0.000004 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.087844 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 409 components and 0.087844 Jy ![Exited script file: muppet] wmap "J1901-1738_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 16.22 at -17.37 degrees (North through East) ! Clean map min=-0.00097908 max=0.061179 Jy/beam ! Writing clean map to FITS file: J1901-1738_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0611795 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000140284 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.687899 0.687899 1.3758 2.7516 5.50319 11.0064 22.0128 44.0256 88.0511 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 16.22 at -17.37 degrees (North through East) ! Clean map min=-0.00097908 max=0.061179 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1901-1738_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:35 2019