! Started logfile: J1859-2509_S_2017_08_05_pus_uvs.log on Thu May 9 19:36:06 2019 obs J1859-2509_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1859-2509_S_2017_08_05_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78087 visibilities/baseline/integration-bin. ! Found source: J1859-2509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 16164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1859-2509_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 750 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.913202Jy sigma=0.006618 ! Fit after self-cal, rms=0.900472Jy sigma=0.006531 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.27 mas, bmaj=7.215 mas, bpa=-5.285 degrees ! Estimated noise=1489.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0791606 Jy ! Component: 100 - total flux cleaned = 0.0976685 Jy ! Total flux subtracted in 100 components = 0.0976685 Jy ! Clean residual min=-0.004894 max=0.008623 Jy/beam ! Clean residual mean=-0.000039 rms=0.001432 Jy/beam ! Combined flux in latest and established models = 0.0976685 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0976685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100786Jy sigma=0.000676 ! Fit after self-cal, rms=0.100771Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=8.078 mas, bpa=-4.526 degrees ! Estimated noise=880.162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109509 Jy ! Component: 100 - total flux cleaned = 0.0170694 Jy ! Component: 150 - total flux cleaned = 0.0208441 Jy ! Component: 200 - total flux cleaned = 0.0232777 Jy ! Total flux subtracted in 200 components = 0.0232777 Jy ! Clean residual min=-0.003494 max=0.004193 Jy/beam ! Clean residual mean=-0.000043 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.120946 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 48 components and 0.120946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099516Jy sigma=0.000667 ! Fit after self-cal, rms=0.099517Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.16 KP 1.05 ! LA 0.99 MK 1.02 NL 0.88 OV 0.99 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.13 KP 0.99 ! LA 0.92 MK 0.98 NL 1.03 OV 0.98 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.23 KP 0.97 ! LA 0.78 MK 1.04 NL 1.13 OV 0.90 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! A total of 144 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.08 KP 1.00* ! LA 1.00* MK 1.12 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.099517Jy sigma=0.000666 ! Fit after self-cal, rms=0.101208Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=8.043 mas, bpa=-4.003 degrees ! Estimated noise=886.564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115186 Jy ! Component: 100 - total flux cleaned = -0.00141003 Jy ! Component: 150 - total flux cleaned = -0.00152289 Jy ! Component: 200 - total flux cleaned = -0.00152177 Jy ! Total flux subtracted in 200 components = -0.00152177 Jy ! Clean residual min=-0.002857 max=0.002754 Jy/beam ! Clean residual mean=-0.000011 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.119424 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.119424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101113Jy sigma=0.000662 ! Fit after self-cal, rms=0.101162Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101162Jy sigma=0.000661 ! Fit after self-cal, rms=0.104585Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=8.052 mas, bpa=-4.207 degrees ! Estimated noise=888.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231153 Jy ! Component: 100 - total flux cleaned = -0.000267911 Jy ! Component: 150 - total flux cleaned = -0.000328612 Jy ! Component: 200 - total flux cleaned = -0.000383049 Jy ! Total flux subtracted in 200 components = -0.000383049 Jy ! Clean residual min=-0.002210 max=0.002329 Jy/beam ! Clean residual mean=-0.000003 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.119041 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.119041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104565Jy sigma=0.000659 ! Fit after self-cal, rms=0.104641Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-126, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150581 Jy ! Component: 100 - total flux cleaned = 0.00142077 Jy ! Component: 150 - total flux cleaned = 0.00138536 Jy ! Component: 200 - total flux cleaned = 0.00132215 Jy ! Total flux subtracted in 200 components = 0.00132215 Jy ! Clean residual min=-0.002047 max=0.002244 Jy/beam ! Clean residual mean=-0.000004 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.120364 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.120364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104589Jy sigma=0.000659 ! Fit after self-cal, rms=0.104583Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104583Jy sigma=0.000659 ! Fit after self-cal, rms=0.105010Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=8.042 mas, bpa=-4.201 degrees ! Estimated noise=888.126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00063244 Jy ! Component: 100 - total flux cleaned = 0.000500235 Jy ! Component: 150 - total flux cleaned = 0.000440955 Jy ! Component: 200 - total flux cleaned = 0.000440589 Jy ! Total flux subtracted in 200 components = 0.000440589 Jy ! Clean residual min=-0.002001 max=0.002164 Jy/beam ! Clean residual mean=-0.000005 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.120804 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 103 components and 0.120804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104986Jy sigma=0.000658 ! Fit after self-cal, rms=0.104985Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -53.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139402 Jy ! Component: 100 - total flux cleaned = 0.00146949 Jy ! Component: 150 - total flux cleaned = 0.00168733 Jy ! Component: 200 - total flux cleaned = 0.00168716 Jy ! Total flux subtracted in 200 components = 0.00168716 Jy ! Clean residual min=-0.002039 max=0.002095 Jy/beam ! Clean residual mean=-0.000005 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.122491 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 0.122491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104941Jy sigma=0.000658 ! Fit after self-cal, rms=0.104943Jy sigma=0.000658 ! Inverting map ! Added new window around map position (116.5, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147188 Jy ! Component: 100 - total flux cleaned = 0.00142184 Jy ! Component: 150 - total flux cleaned = 0.00146031 Jy ! Component: 200 - total flux cleaned = 0.00145843 Jy ! Total flux subtracted in 200 components = 0.00145843 Jy ! Clean residual min=-0.001916 max=0.001705 Jy/beam ! Clean residual mean=-0.000008 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.12395 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 141 components and 0.12395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104887Jy sigma=0.000658 ! Fit after self-cal, rms=0.104879Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104879Jy sigma=0.000658 ! Fit after self-cal, rms=0.104680Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.543 mas, bmaj=19.9 mas, bpa=-0.7278 degrees ! Estimated noise=1125.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255005 Jy ! Component: 100 - total flux cleaned = 0.000202344 Jy ! Component: 150 - total flux cleaned = 8.42485e-05 Jy ! Component: 200 - total flux cleaned = 1.92043e-05 Jy ! Total flux subtracted in 200 components = 1.92043e-05 Jy ! Clean residual min=-0.001957 max=0.001746 Jy/beam ! Clean residual mean=-0.000021 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.123969 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 156 components and 0.123969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104667Jy sigma=0.000658 ! Fit after self-cal, rms=0.104670Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.32011e-05 Jy ! Component: 100 - total flux cleaned = -0.000110576 Jy ! Component: 150 - total flux cleaned = -0.000166973 Jy ! Component: 200 - total flux cleaned = -0.000236899 Jy ! Total flux subtracted in 200 components = -0.000236899 Jy ! Clean residual min=-0.001899 max=0.001731 Jy/beam ! Clean residual mean=-0.000022 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.123732 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 162 components and 0.123732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104664Jy sigma=0.000658 ! Fit after self-cal, rms=0.104666Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=8.031 mas, bpa=-4.18 degrees ! Estimated noise=886.069 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 8.031 at -4.18 degrees (North through East) ! Clean map min=-0.0018127 max=0.098971 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.294 mas, bmaj=7.117 mas, bpa=-4.791 degrees ! Estimated noise=1522.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0796809 Jy ! Component: 100 - total flux cleaned = 0.0979731 Jy ! Component: 150 - total flux cleaned = 0.105852 Jy ! Component: 200 - total flux cleaned = 0.111073 Jy ! Total flux subtracted in 200 components = 0.111073 Jy ! Clean residual min=-0.003249 max=0.003204 Jy/beam ! Clean residual mean=-0.000010 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.111073 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.111073 Jy ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=8.031 mas, bpa=-4.18 degrees ! Estimated noise=886.069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437409 Jy ! Component: 100 - total flux cleaned = 0.00721745 Jy ! Component: 150 - total flux cleaned = 0.00941253 Jy ! Component: 200 - total flux cleaned = 0.0104384 Jy ! Total flux subtracted in 200 components = 0.0104384 Jy ! Clean residual min=-0.002145 max=0.001767 Jy/beam ! Clean residual mean=-0.000014 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.121512 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 72 components and 0.121512 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.543 mas, bmaj=19.9 mas, bpa=-0.7278 degrees ! Estimated noise=1125.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092835 Jy ! Component: 100 - total flux cleaned = 0.00128437 Jy ! Component: 150 - total flux cleaned = 0.00119894 Jy ! Component: 200 - total flux cleaned = 0.00112597 Jy ! Total flux subtracted in 200 components = 0.00112597 Jy ! Clean residual min=-0.002073 max=0.001741 Jy/beam ! Clean residual mean=-0.000029 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.122638 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.24645e-05 Jy ! Component: 100 - total flux cleaned = -6.13555e-05 Jy ! Component: 150 - total flux cleaned = -0.000111649 Jy ! Component: 200 - total flux cleaned = -0.000135179 Jy ! Total flux subtracted in 200 components = -0.000135179 Jy ! Clean residual min=-0.001964 max=0.001730 Jy/beam ! Clean residual mean=-0.000027 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.122503 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 130 components and 0.122503 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=8.031 mas, bpa=-4.18 degrees ! Estimated noise=886.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000592182 Jy ! Component: 100 - total flux cleaned = 0.000641617 Jy ! Component: 150 - total flux cleaned = 0.000640832 Jy ! Component: 200 - total flux cleaned = 0.000514142 Jy ! Total flux subtracted in 200 components = 0.000514142 Jy ! Clean residual min=-0.002083 max=0.001767 Jy/beam ! Clean residual mean=-0.000011 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.123017 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 151 components and 0.123017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104723Jy sigma=0.000658 ! Fit after self-cal, rms=0.104681Jy sigma=0.000658 wmodel J1859-2509_S_2017_08_05_pus_map.mod ! Writing 151 model components to file: J1859-2509_S_2017_08_05_pus_map.mod wobs J1859-2509_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1859-2509_S_2017_08_05_pus_uvs.fits wwins J1859-2509_S_2017_08_05_pus_map.win ! wwins: Wrote 5 windows to J1859-2509_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000708522 Jy ! Component: 100 - total flux cleaned = -0.00120057 Jy ! Component: 150 - total flux cleaned = -0.00134551 Jy ! Component: 200 - total flux cleaned = -0.00148339 Jy ! Component: 250 - total flux cleaned = -0.00161605 Jy ! Component: 300 - total flux cleaned = -0.00177036 Jy ! Component: 350 - total flux cleaned = -0.00196978 Jy ! Component: 400 - total flux cleaned = -0.00206656 Jy ! Component: 450 - total flux cleaned = -0.00227872 Jy ! Component: 500 - total flux cleaned = -0.00239374 Jy ! Component: 550 - total flux cleaned = -0.00252915 Jy ! Component: 600 - total flux cleaned = -0.00257319 Jy ! Component: 650 - total flux cleaned = -0.00272457 Jy ! Component: 700 - total flux cleaned = -0.00283071 Jy ! Component: 750 - total flux cleaned = -0.00291427 Jy ! Component: 800 - total flux cleaned = -0.00297564 Jy ! Component: 850 - total flux cleaned = -0.00311703 Jy ! Component: 900 - total flux cleaned = -0.00323577 Jy ! Component: 950 - total flux cleaned = -0.00327473 Jy ! Component: 1000 - total flux cleaned = -0.0033707 Jy ! Component: 1050 - total flux cleaned = -0.00342751 Jy ! Component: 1100 - total flux cleaned = -0.00353972 Jy ! Component: 1150 - total flux cleaned = -0.0035952 Jy ! Component: 1200 - total flux cleaned = -0.00374082 Jy ! Component: 1250 - total flux cleaned = -0.00384829 Jy ! Component: 1300 - total flux cleaned = -0.00397198 Jy ! Component: 1350 - total flux cleaned = -0.00407673 Jy ! Component: 1400 - total flux cleaned = -0.00419739 Jy ! Component: 1450 - total flux cleaned = -0.00436738 Jy ! Component: 1500 - total flux cleaned = -0.00445119 Jy ! Component: 1550 - total flux cleaned = -0.00460031 Jy ! Component: 1600 - total flux cleaned = -0.00468202 Jy ! Component: 1650 - total flux cleaned = -0.00479533 Jy ! Component: 1700 - total flux cleaned = -0.00490707 Jy ! Component: 1750 - total flux cleaned = -0.00503324 Jy ! Component: 1800 - total flux cleaned = -0.00517321 Jy ! Component: 1850 - total flux cleaned = -0.00526536 Jy ! Component: 1900 - total flux cleaned = -0.00537206 Jy ! Component: 1950 - total flux cleaned = -0.00543232 Jy ! Component: 2000 - total flux cleaned = -0.00550727 Jy ! Component: 2050 - total flux cleaned = -0.00566939 Jy ! Component: 2100 - total flux cleaned = -0.00572782 Jy ! Component: 2150 - total flux cleaned = -0.00578568 Jy ! Component: 2200 - total flux cleaned = -0.00585718 Jy ! Component: 2250 - total flux cleaned = -0.00592826 Jy ! Component: 2300 - total flux cleaned = -0.00608205 Jy ! Component: 2350 - total flux cleaned = -0.00616525 Jy ! Component: 2400 - total flux cleaned = -0.00626134 Jy ! Component: 2450 - total flux cleaned = -0.00635646 Jy ! Component: 2500 - total flux cleaned = -0.00649101 Jy ! Component: 2550 - total flux cleaned = -0.0065309 Jy ! Component: 2600 - total flux cleaned = -0.00661018 Jy ! Component: 2650 - total flux cleaned = -0.00675421 Jy ! Component: 2700 - total flux cleaned = -0.006832 Jy ! Component: 2750 - total flux cleaned = -0.00689629 Jy ! Component: 2800 - total flux cleaned = -0.00701117 Jy ! Component: 2850 - total flux cleaned = -0.00709964 Jy ! Component: 2900 - total flux cleaned = -0.00712485 Jy ! Component: 2950 - total flux cleaned = -0.00727429 Jy ! Component: 3000 - total flux cleaned = -0.00731126 Jy ! Component: 3050 - total flux cleaned = -0.00740929 Jy ! Component: 3100 - total flux cleaned = -0.00747011 Jy ! Component: 3150 - total flux cleaned = -0.00759074 Jy ! Component: 3200 - total flux cleaned = -0.00766243 Jy ! Component: 3250 - total flux cleaned = -0.0077455 Jy ! Component: 3300 - total flux cleaned = -0.00778092 Jy ! Component: 3350 - total flux cleaned = -0.00793266 Jy ! Component: 3400 - total flux cleaned = -0.00794425 Jy ! Component: 3450 - total flux cleaned = -0.00804781 Jy ! Component: 3500 - total flux cleaned = -0.00810494 Jy ! Component: 3550 - total flux cleaned = -0.00819561 Jy ! Component: 3600 - total flux cleaned = -0.00827436 Jy ! Component: 3650 - total flux cleaned = -0.0083523 Jy ! Component: 3700 - total flux cleaned = -0.0083966 Jy ! Component: 3750 - total flux cleaned = -0.00847359 Jy ! Component: 3800 - total flux cleaned = -0.00857185 Jy ! Component: 3850 - total flux cleaned = -0.00863689 Jy ! Component: 3900 - total flux cleaned = -0.00874447 Jy ! Component: 3950 - total flux cleaned = -0.00881927 Jy ! Component: 4000 - total flux cleaned = -0.00888297 Jy ! Component: 4050 - total flux cleaned = -0.00894625 Jy ! Total flux subtracted in 4096 components = -0.00903014 Jy ! Clean residual min=-0.000681 max=0.000618 Jy/beam ! Clean residual mean=-0.000004 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.113987 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 409 components and 0.113987 Jy ![Exited script file: muppet] wmap "J1859-2509_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 8.031 at -4.18 degrees (North through East) ! Clean map min=-0.0014037 max=0.10045 Jy/beam ! Writing clean map to FITS file: J1859-2509_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100448 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000187602 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.560299 0.560299 1.1206 2.24119 4.48239 8.96478 17.9296 35.8591 71.7182 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 8.031 at -4.18 degrees (North through East) ! Clean map min=-0.0014037 max=0.10045 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1859-2509_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:36:11 2019