! Started logfile: J1859-0121_S_2017_10_09_pus_uvs.log on Sun May 12 13:18:24 2019 obs J1859-0121_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1859-0121_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.486957 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1859-0121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 8064 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1859-0121_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 298 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 413 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 298 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 651 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915141Jy sigma=0.007609 ! Fit after self-cal, rms=0.904629Jy sigma=0.007527 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.918 mas, bmaj=17.07 mas, bpa=-16.56 degrees ! Estimated noise=1344.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716588 Jy ! Component: 100 - total flux cleaned = 0.0925421 Jy ! Total flux subtracted in 100 components = 0.0925421 Jy ! Clean residual min=-0.005188 max=0.009373 Jy/beam ! Clean residual mean=0.000102 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.0925421 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0925421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085571Jy sigma=0.000656 ! Fit after self-cal, rms=0.085505Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.571 mas, bmaj=20.37 mas, bpa=-17.17 degrees ! Estimated noise=1125.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141852 Jy ! Component: 100 - total flux cleaned = 0.020694 Jy ! Component: 150 - total flux cleaned = 0.0246691 Jy ! Component: 200 - total flux cleaned = 0.0272755 Jy ! Total flux subtracted in 200 components = 0.0272755 Jy ! Clean residual min=-0.003236 max=0.003529 Jy/beam ! Clean residual mean=0.000022 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.119818 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 84 components and 0.119818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083079Jy sigma=0.000637 ! Fit after self-cal, rms=0.083014Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 0.98 KP 1.10 ! LA 1.01 MK 1.00* NL 0.93 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.11 KP 0.99 ! LA 0.99 MK 1.00* NL 1.03 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.03 KP 0.91 ! LA 0.81 MK 1.00* NL 1.17 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.84 KP 1.00* ! LA 0.81 MK 1.00* NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.083014Jy sigma=0.000637 ! Fit after self-cal, rms=0.081067Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.602 mas, bmaj=20.56 mas, bpa=-16.97 degrees ! Estimated noise=1138.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225595 Jy ! Component: 100 - total flux cleaned = -0.000255218 Jy ! Component: 150 - total flux cleaned = -0.000279701 Jy ! Component: 200 - total flux cleaned = -0.000302069 Jy ! Total flux subtracted in 200 components = -0.000302069 Jy ! Clean residual min=-0.002654 max=0.002742 Jy/beam ! Clean residual mean=-0.000013 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.119516 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.119516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081046Jy sigma=0.000634 ! Fit after self-cal, rms=0.081008Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081008Jy sigma=0.000633 ! Fit after self-cal, rms=0.080672Jy sigma=0.000632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.623 mas, bmaj=20.61 mas, bpa=-17.04 degrees ! Estimated noise=1138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151084 Jy ! Component: 100 - total flux cleaned = 0.000232638 Jy ! Component: 150 - total flux cleaned = 0.000208896 Jy ! Component: 200 - total flux cleaned = 0.000176426 Jy ! Total flux subtracted in 200 components = 0.000176426 Jy ! Clean residual min=-0.002419 max=0.002471 Jy/beam ! Clean residual mean=-0.000007 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.119692 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 123 components and 0.119692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080665Jy sigma=0.000632 ! Fit after self-cal, rms=0.080669Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-102.5, 81.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101353 Jy ! Component: 100 - total flux cleaned = 0.00091584 Jy ! Component: 150 - total flux cleaned = 0.000472686 Jy ! Component: 200 - total flux cleaned = 0.000343469 Jy ! Total flux subtracted in 200 components = 0.000343469 Jy ! Clean residual min=-0.002056 max=0.001968 Jy/beam ! Clean residual mean=-0.000002 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.120035 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 147 components and 0.120035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080597Jy sigma=0.000631 ! Fit after self-cal, rms=0.080579Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080579Jy sigma=0.000631 ! Fit after self-cal, rms=0.080305Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.624 mas, bmaj=20.63 mas, bpa=-17.04 degrees ! Estimated noise=1133.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.19878e-05 Jy ! Component: 100 - total flux cleaned = -0.000194319 Jy ! Component: 150 - total flux cleaned = -0.000195675 Jy ! Component: 200 - total flux cleaned = -0.000148489 Jy ! Total flux subtracted in 200 components = -0.000148489 Jy ! Clean residual min=-0.001904 max=0.002038 Jy/beam ! Clean residual mean=-0.000003 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.119887 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 162 components and 0.119887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080280Jy sigma=0.000631 ! Fit after self-cal, rms=0.080275Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (124.5, 127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000880208 Jy ! Component: 100 - total flux cleaned = 0.00110233 Jy ! Component: 150 - total flux cleaned = 0.00104219 Jy ! Component: 200 - total flux cleaned = 0.00104123 Jy ! Total flux subtracted in 200 components = 0.00104123 Jy ! Clean residual min=-0.001573 max=0.001444 Jy/beam ! Clean residual mean=-0.000004 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.120928 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 188 components and 0.120928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080222Jy sigma=0.000631 ! Fit after self-cal, rms=0.080209Jy sigma=0.000631 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080209Jy sigma=0.000631 ! Fit after self-cal, rms=0.080064Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.132 mas, bmaj=20.84 mas, bpa=-19.85 degrees ! Estimated noise=1224.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315423 Jy ! Component: 100 - total flux cleaned = 0.00031676 Jy ! Component: 150 - total flux cleaned = 0.000214513 Jy ! Component: 200 - total flux cleaned = 0.000123226 Jy ! Total flux subtracted in 200 components = 0.000123226 Jy ! Clean residual min=-0.001284 max=0.001202 Jy/beam ! Clean residual mean=-0.000007 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.121051 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 217 components and 0.121051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080050Jy sigma=0.000631 ! Fit after self-cal, rms=0.080052Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113088 Jy ! Component: 100 - total flux cleaned = -0.000221763 Jy ! Component: 150 - total flux cleaned = -0.000305586 Jy ! Component: 200 - total flux cleaned = -0.000336745 Jy ! Total flux subtracted in 200 components = -0.000336745 Jy ! Clean residual min=-0.001265 max=0.001121 Jy/beam ! Clean residual mean=-0.000006 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.120715 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 229 components and 0.120715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080043Jy sigma=0.000630 ! Fit after self-cal, rms=0.080041Jy sigma=0.000630 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.626 mas, bmaj=20.66 mas, bpa=-17.04 degrees ! Estimated noise=1131.15 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.626 x 20.66 at -17.04 degrees (North through East) ! Clean map min=-0.0017399 max=0.09556 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.943 mas, bmaj=17.33 mas, bpa=-16.51 degrees ! Estimated noise=1350.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0707055 Jy ! Component: 100 - total flux cleaned = 0.0927488 Jy ! Component: 150 - total flux cleaned = 0.103291 Jy ! Component: 200 - total flux cleaned = 0.108679 Jy ! Total flux subtracted in 200 components = 0.108679 Jy ! Clean residual min=-0.003405 max=0.003530 Jy/beam ! Clean residual mean=0.000026 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.108679 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.108679 Jy ! Inverting map and beam ! Estimated beam: bmin=5.626 mas, bmaj=20.66 mas, bpa=-17.04 degrees ! Estimated noise=1131.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508916 Jy ! Component: 100 - total flux cleaned = 0.00796425 Jy ! Component: 150 - total flux cleaned = 0.00934704 Jy ! Component: 200 - total flux cleaned = 0.00976168 Jy ! Total flux subtracted in 200 components = 0.00976168 Jy ! Clean residual min=-0.002103 max=0.001967 Jy/beam ! Clean residual mean=0.000007 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.118441 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 71 components and 0.118441 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.132 mas, bmaj=20.84 mas, bpa=-19.85 degrees ! Estimated noise=1224.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115178 Jy ! Component: 100 - total flux cleaned = 0.00132235 Jy ! Component: 150 - total flux cleaned = 0.00152828 Jy ! Component: 200 - total flux cleaned = 0.00165943 Jy ! Total flux subtracted in 200 components = 0.00165943 Jy ! Clean residual min=-0.001520 max=0.001531 Jy/beam ! Clean residual mean=-0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.1201 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155127 Jy ! Component: 100 - total flux cleaned = 0.000400804 Jy ! Component: 150 - total flux cleaned = 0.000497422 Jy ! Component: 200 - total flux cleaned = 0.000557328 Jy ! Total flux subtracted in 200 components = 0.000557328 Jy ! Clean residual min=-0.001327 max=0.001364 Jy/beam ! Clean residual mean=-0.000003 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.120657 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 137 components and 0.120657 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.626 mas, bmaj=20.66 mas, bpa=-17.04 degrees ! Estimated noise=1131.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135041 Jy ! Component: 100 - total flux cleaned = 0.000207747 Jy ! Component: 150 - total flux cleaned = 0.000239944 Jy ! Component: 200 - total flux cleaned = 0.000327184 Jy ! Total flux subtracted in 200 components = 0.000327184 Jy ! Clean residual min=-0.001611 max=0.001348 Jy/beam ! Clean residual mean=-0.000002 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.120985 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 160 components and 0.120985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080060Jy sigma=0.000631 ! Fit after self-cal, rms=0.080059Jy sigma=0.000631 wmodel J1859-0121_S_2017_10_09_pus_map.mod ! Writing 160 model components to file: J1859-0121_S_2017_10_09_pus_map.mod wobs J1859-0121_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1859-0121_S_2017_10_09_pus_uvs.fits wwins J1859-0121_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J1859-0121_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444368 Jy ! Component: 100 - total flux cleaned = -0.000466883 Jy ! Component: 150 - total flux cleaned = -0.000508637 Jy ! Component: 200 - total flux cleaned = -0.00056738 Jy ! Component: 250 - total flux cleaned = -0.000549165 Jy ! Component: 300 - total flux cleaned = -0.000601515 Jy ! Component: 350 - total flux cleaned = -0.00066892 Jy ! Component: 400 - total flux cleaned = -0.000717433 Jy ! Component: 450 - total flux cleaned = -0.000778666 Jy ! Component: 500 - total flux cleaned = -0.000837905 Jy ! Component: 550 - total flux cleaned = -0.000938633 Jy ! Component: 600 - total flux cleaned = -0.000994788 Jy ! Component: 650 - total flux cleaned = -0.00109022 Jy ! Component: 700 - total flux cleaned = -0.00115642 Jy ! Component: 750 - total flux cleaned = -0.00123412 Jy ! Component: 800 - total flux cleaned = -0.00129722 Jy ! Component: 850 - total flux cleaned = -0.00139601 Jy ! Component: 900 - total flux cleaned = -0.0014563 Jy ! Component: 950 - total flux cleaned = -0.00150356 Jy ! Component: 1000 - total flux cleaned = -0.00153807 Jy ! Component: 1050 - total flux cleaned = -0.00154964 Jy ! Component: 1100 - total flux cleaned = -0.00159425 Jy ! Component: 1150 - total flux cleaned = -0.00160531 Jy ! Component: 1200 - total flux cleaned = -0.00161608 Jy ! Component: 1250 - total flux cleaned = -0.0016162 Jy ! Component: 1300 - total flux cleaned = -0.00161645 Jy ! Component: 1350 - total flux cleaned = -0.00158638 Jy ! Component: 1400 - total flux cleaned = -0.00157651 Jy ! Component: 1450 - total flux cleaned = -0.00152752 Jy ! Component: 1500 - total flux cleaned = -0.00147954 Jy ! Component: 1550 - total flux cleaned = -0.00146067 Jy ! Component: 1600 - total flux cleaned = -0.00143286 Jy ! Component: 1650 - total flux cleaned = -0.0014237 Jy ! Component: 1700 - total flux cleaned = -0.00143265 Jy ! Component: 1750 - total flux cleaned = -0.00140567 Jy ! Component: 1800 - total flux cleaned = -0.00136139 Jy ! Component: 1850 - total flux cleaned = -0.00136155 Jy ! Component: 1900 - total flux cleaned = -0.00133549 Jy ! Component: 1950 - total flux cleaned = -0.00133542 Jy ! Component: 2000 - total flux cleaned = -0.00130168 Jy ! Component: 2050 - total flux cleaned = -0.00130174 Jy ! Component: 2100 - total flux cleaned = -0.00129345 Jy ! Component: 2150 - total flux cleaned = -0.00124424 Jy ! Component: 2200 - total flux cleaned = -0.00122802 Jy ! Component: 2250 - total flux cleaned = -0.00119584 Jy ! Component: 2300 - total flux cleaned = -0.00117991 Jy ! Component: 2350 - total flux cleaned = -0.00117987 Jy ! Component: 2400 - total flux cleaned = -0.00119549 Jy ! Component: 2450 - total flux cleaned = -0.00118002 Jy ! Component: 2500 - total flux cleaned = -0.00118 Jy ! Component: 2550 - total flux cleaned = -0.00118011 Jy ! Component: 2600 - total flux cleaned = -0.00118763 Jy ! Component: 2650 - total flux cleaned = -0.00118013 Jy ! Component: 2700 - total flux cleaned = -0.00119509 Jy ! Component: 2750 - total flux cleaned = -0.00120987 Jy ! Component: 2800 - total flux cleaned = -0.00121729 Jy ! Component: 2850 - total flux cleaned = -0.00122468 Jy ! Component: 2900 - total flux cleaned = -0.0012464 Jy ! Component: 2950 - total flux cleaned = -0.00123193 Jy ! Component: 3000 - total flux cleaned = -0.00123908 Jy ! Component: 3050 - total flux cleaned = -0.00123193 Jy ! Component: 3100 - total flux cleaned = -0.00120345 Jy ! Component: 3150 - total flux cleaned = -0.00118931 Jy ! Component: 3200 - total flux cleaned = -0.00116105 Jy ! Component: 3250 - total flux cleaned = -0.00116807 Jy ! Component: 3300 - total flux cleaned = -0.00115403 Jy ! Component: 3350 - total flux cleaned = -0.00112607 Jy ! Component: 3400 - total flux cleaned = -0.0011191 Jy ! Component: 3450 - total flux cleaned = -0.00109823 Jy ! Component: 3500 - total flux cleaned = -0.0010913 Jy ! Component: 3550 - total flux cleaned = -0.00104989 Jy ! Component: 3600 - total flux cleaned = -0.00104303 Jy ! Component: 3650 - total flux cleaned = -0.00102246 Jy ! Component: 3700 - total flux cleaned = -0.00102246 Jy ! Component: 3750 - total flux cleaned = -0.000995058 Jy ! Component: 3800 - total flux cleaned = -0.00100194 Jy ! Component: 3850 - total flux cleaned = -0.000988308 Jy ! Component: 3900 - total flux cleaned = -0.00100195 Jy ! Component: 3950 - total flux cleaned = -0.000995126 Jy ! Component: 4000 - total flux cleaned = -0.00100194 Jy ! Component: 4050 - total flux cleaned = -0.00099514 Jy ! Total flux subtracted in 4096 components = -0.00100195 Jy ! Clean residual min=-0.000402 max=0.000746 Jy/beam ! Clean residual mean=-0.000001 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.119983 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 464 components and 0.119983 Jy ![Exited script file: muppet] wmap "J1859-0121_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.626 x 20.66 at -17.04 degrees (North through East) ! Clean map min=-0.0013055 max=0.094857 Jy/beam ! Writing clean map to FITS file: J1859-0121_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0948568 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013129 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.415224 0.415224 0.830449 1.6609 3.32179 6.64359 13.2872 26.5744 53.1487 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.626 x 20.66 at -17.04 degrees (North through East) ! Clean map min=-0.0013055 max=0.094857 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1859-0121_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:29 2019