! Started logfile: J1859-0121_S_2017_08_12_pus_uvs.log on Fri May 10 15:05:22 2019 obs J1859-0121_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1859-0121_S_2017_08_12_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.411265 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1859-0121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1859-0121_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 493 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 683 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 589 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1440 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931088Jy sigma=0.007886 ! Fit after self-cal, rms=0.915554Jy sigma=0.007766 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.844 mas, bmaj=14.88 mas, bpa=-6.712 degrees ! Estimated noise=1299.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637206 Jy ! Component: 100 - total flux cleaned = 0.0816515 Jy ! Total flux subtracted in 100 components = 0.0816515 Jy ! Clean residual min=-0.006442 max=0.008157 Jy/beam ! Clean residual mean=0.000023 rms=0.001782 Jy/beam ! Combined flux in latest and established models = 0.0816515 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0816515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082310Jy sigma=0.000665 ! Fit after self-cal, rms=0.082296Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.543 mas, bmaj=18.24 mas, bpa=-9.657 degrees ! Estimated noise=1047.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012674 Jy ! Component: 100 - total flux cleaned = 0.0189078 Jy ! Component: 150 - total flux cleaned = 0.022619 Jy ! Component: 200 - total flux cleaned = 0.0250071 Jy ! Total flux subtracted in 200 components = 0.0250071 Jy ! Clean residual min=-0.003781 max=0.003566 Jy/beam ! Clean residual mean=0.000016 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.106659 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 79 components and 0.106659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080405Jy sigma=0.000648 ! Fit after self-cal, rms=0.080419Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* HN 0.97 KP 1.01 ! LA 0.98 MK 1.00* NL 0.97 OV 1.01 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00* HN 1.00 KP 0.98 ! LA 0.92 MK 1.00* NL 1.08 OV 1.05 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 1.00* HN 1.10 KP 0.95 ! LA 0.93 MK 1.00* NL 1.01 OV 0.96 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.080419Jy sigma=0.000648 ! Fit after self-cal, rms=0.080310Jy sigma=0.000643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.581 mas, bmaj=18.52 mas, bpa=-9.831 degrees ! Estimated noise=1046.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551202 Jy ! Component: 100 - total flux cleaned = 0.000612107 Jy ! Component: 150 - total flux cleaned = 0.000633946 Jy ! Component: 200 - total flux cleaned = 0.00066674 Jy ! Total flux subtracted in 200 components = 0.00066674 Jy ! Clean residual min=-0.002772 max=0.002662 Jy/beam ! Clean residual mean=0.000007 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.107325 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 105 components and 0.107325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080288Jy sigma=0.000643 ! Fit after self-cal, rms=0.080327Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080327Jy sigma=0.000643 ! Fit after self-cal, rms=0.081086Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.576 mas, bmaj=18.66 mas, bpa=-9.988 degrees ! Estimated noise=1048.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701072 Jy ! Component: 100 - total flux cleaned = 0.000702768 Jy ! Component: 150 - total flux cleaned = 0.00068552 Jy ! Component: 200 - total flux cleaned = 0.000669764 Jy ! Total flux subtracted in 200 components = 0.000669764 Jy ! Clean residual min=-0.002574 max=0.002305 Jy/beam ! Clean residual mean=0.000006 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.107995 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 115 components and 0.107995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081073Jy sigma=0.000642 ! Fit after self-cal, rms=0.081101Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.07597e-06 Jy ! Component: 100 - total flux cleaned = -2.08928e-05 Jy ! Component: 150 - total flux cleaned = -3.29292e-05 Jy ! Component: 200 - total flux cleaned = -2.15062e-05 Jy ! Total flux subtracted in 200 components = -2.15062e-05 Jy ! Clean residual min=-0.002551 max=0.002284 Jy/beam ! Clean residual mean=0.000006 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.107974 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 123 components and 0.107974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081097Jy sigma=0.000642 ! Fit after self-cal, rms=0.081099Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081099Jy sigma=0.000642 ! Fit after self-cal, rms=0.081528Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.563 mas, bmaj=18.69 mas, bpa=-9.958 degrees ! Estimated noise=1048.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.60803e-05 Jy ! Component: 100 - total flux cleaned = 7.77371e-05 Jy ! Component: 150 - total flux cleaned = 8.99185e-05 Jy ! Component: 200 - total flux cleaned = 8.96273e-05 Jy ! Total flux subtracted in 200 components = 8.96273e-05 Jy ! Clean residual min=-0.002318 max=0.002131 Jy/beam ! Clean residual mean=0.000005 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.108063 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 132 components and 0.108063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081523Jy sigma=0.000641 ! Fit after self-cal, rms=0.081549Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.02055e-05 Jy ! Component: 100 - total flux cleaned = -2.8124e-05 Jy ! Component: 150 - total flux cleaned = -7.1302e-06 Jy ! Component: 200 - total flux cleaned = -6.82227e-06 Jy ! Total flux subtracted in 200 components = -6.82227e-06 Jy ! Clean residual min=-0.002329 max=0.002097 Jy/beam ! Clean residual mean=0.000005 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.108056 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 137 components and 0.108056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081546Jy sigma=0.000641 ! Fit after self-cal, rms=0.081549Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081549Jy sigma=0.000641 ! Fit after self-cal, rms=0.081631Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.987 mas, bmaj=18.68 mas, bpa=-10.78 degrees ! Estimated noise=1113.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.58206e-05 Jy ! Component: 100 - total flux cleaned = 4.53582e-05 Jy ! Component: 150 - total flux cleaned = 4.57154e-05 Jy ! Component: 200 - total flux cleaned = 6.09086e-05 Jy ! Total flux subtracted in 200 components = 6.09086e-05 Jy ! Clean residual min=-0.002500 max=0.002276 Jy/beam ! Clean residual mean=0.000007 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.108117 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 146 components and 0.108117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081628Jy sigma=0.000641 ! Fit after self-cal, rms=0.081631Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.04633e-05 Jy ! Component: 100 - total flux cleaned = -1.16411e-05 Jy ! Component: 150 - total flux cleaned = -4.94627e-06 Jy ! Component: 200 - total flux cleaned = -1.74118e-05 Jy ! Total flux subtracted in 200 components = -1.74118e-05 Jy ! Clean residual min=-0.002503 max=0.002264 Jy/beam ! Clean residual mean=0.000007 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.1081 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 153 components and 0.1081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081629Jy sigma=0.000641 ! Fit after self-cal, rms=0.081630Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.555 mas, bmaj=18.72 mas, bpa=-9.978 degrees ! Estimated noise=1048.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.555 x 18.72 at -9.978 degrees (North through East) ! Clean map min=-0.0023206 max=0.087434 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.828 mas, bmaj=15.32 mas, bpa=-7.035 degrees ! Estimated noise=1340.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0648702 Jy ! Component: 100 - total flux cleaned = 0.0847858 Jy ! Component: 150 - total flux cleaned = 0.0938847 Jy ! Component: 200 - total flux cleaned = 0.0989012 Jy ! Total flux subtracted in 200 components = 0.0989012 Jy ! Clean residual min=-0.004069 max=0.003244 Jy/beam ! Clean residual mean=0.000009 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.0989012 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0989012 Jy ! Inverting map and beam ! Estimated beam: bmin=5.555 mas, bmaj=18.72 mas, bpa=-9.978 degrees ! Estimated noise=1048.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400919 Jy ! Component: 100 - total flux cleaned = 0.00627784 Jy ! Component: 150 - total flux cleaned = 0.00770902 Jy ! Component: 200 - total flux cleaned = 0.00861774 Jy ! Total flux subtracted in 200 components = 0.00861774 Jy ! Clean residual min=-0.002469 max=0.002021 Jy/beam ! Clean residual mean=0.000006 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.107519 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 84 components and 0.107519 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.987 mas, bmaj=18.68 mas, bpa=-10.78 degrees ! Estimated noise=1113.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525033 Jy ! Component: 100 - total flux cleaned = 0.000605484 Jy ! Component: 150 - total flux cleaned = 0.000672021 Jy ! Component: 200 - total flux cleaned = 0.000714265 Jy ! Total flux subtracted in 200 components = 0.000714265 Jy ! Clean residual min=-0.002466 max=0.002234 Jy/beam ! Clean residual mean=0.000007 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.108233 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.66294e-05 Jy ! Component: 100 - total flux cleaned = 5.87284e-05 Jy ! Component: 150 - total flux cleaned = 5.82705e-05 Jy ! Component: 200 - total flux cleaned = 5.81067e-05 Jy ! Total flux subtracted in 200 components = 5.81067e-05 Jy ! Clean residual min=-0.002466 max=0.002245 Jy/beam ! Clean residual mean=0.000007 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.108291 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 0.108291 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.555 mas, bmaj=18.72 mas, bpa=-9.978 degrees ! Estimated noise=1048.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.15099e-05 Jy ! Component: 100 - total flux cleaned = -8.2091e-05 Jy ! Component: 150 - total flux cleaned = -9.6812e-05 Jy ! Component: 200 - total flux cleaned = -8.31024e-05 Jy ! Total flux subtracted in 200 components = -8.31024e-05 Jy ! Clean residual min=-0.002296 max=0.002098 Jy/beam ! Clean residual mean=0.000005 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.108208 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 121 components and 0.108208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081640Jy sigma=0.000641 ! Fit after self-cal, rms=0.081624Jy sigma=0.000641 wmodel J1859-0121_S_2017_08_12_pus_map.mod ! Writing 121 model components to file: J1859-0121_S_2017_08_12_pus_map.mod wobs J1859-0121_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1859-0121_S_2017_08_12_pus_uvs.fits wwins J1859-0121_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1859-0121_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350722 Jy ! Component: 100 - total flux cleaned = -0.000247218 Jy ! Component: 150 - total flux cleaned = -0.000150092 Jy ! Component: 200 - total flux cleaned = 3.50959e-05 Jy ! Component: 250 - total flux cleaned = 3.44645e-05 Jy ! Component: 300 - total flux cleaned = 3.43683e-05 Jy ! Component: 350 - total flux cleaned = 0.000192303 Jy ! Component: 400 - total flux cleaned = 0.000369403 Jy ! Component: 450 - total flux cleaned = 0.000491675 Jy ! Component: 500 - total flux cleaned = 0.000563023 Jy ! Component: 550 - total flux cleaned = 0.000678097 Jy ! Component: 600 - total flux cleaned = 0.000812293 Jy ! Component: 650 - total flux cleaned = 0.000965248 Jy ! Component: 700 - total flux cleaned = 0.00107219 Jy ! Component: 750 - total flux cleaned = 0.00119834 Jy ! Component: 800 - total flux cleaned = 0.00123937 Jy ! Component: 850 - total flux cleaned = 0.00123951 Jy ! Component: 900 - total flux cleaned = 0.0013184 Jy ! Component: 950 - total flux cleaned = 0.00129903 Jy ! Component: 1000 - total flux cleaned = 0.00133722 Jy ! Component: 1050 - total flux cleaned = 0.0013747 Jy ! Component: 1100 - total flux cleaned = 0.00137483 Jy ! Component: 1150 - total flux cleaned = 0.00139269 Jy ! Component: 1200 - total flux cleaned = 0.0013928 Jy ! Component: 1250 - total flux cleaned = 0.00142787 Jy ! Component: 1300 - total flux cleaned = 0.00151338 Jy ! Component: 1350 - total flux cleaned = 0.00147968 Jy ! Component: 1400 - total flux cleaned = 0.00156259 Jy ! Component: 1450 - total flux cleaned = 0.00162831 Jy ! Component: 1500 - total flux cleaned = 0.00169295 Jy ! Component: 1550 - total flux cleaned = 0.0017725 Jy ! Component: 1600 - total flux cleaned = 0.00178803 Jy ! Component: 1650 - total flux cleaned = 0.0018038 Jy ! Component: 1700 - total flux cleaned = 0.00183444 Jy ! Component: 1750 - total flux cleaned = 0.00187982 Jy ! Component: 1800 - total flux cleaned = 0.00192465 Jy ! Component: 1850 - total flux cleaned = 0.00193937 Jy ! Component: 1900 - total flux cleaned = 0.00202676 Jy ! Component: 1950 - total flux cleaned = 0.00205551 Jy ! Component: 2000 - total flux cleaned = 0.00204126 Jy ! Component: 2050 - total flux cleaned = 0.00208362 Jy ! Component: 2100 - total flux cleaned = 0.00205567 Jy ! Component: 2150 - total flux cleaned = 0.00209732 Jy ! Component: 2200 - total flux cleaned = 0.00212478 Jy ! Component: 2250 - total flux cleaned = 0.00216552 Jy ! Component: 2300 - total flux cleaned = 0.00219238 Jy ! Component: 2350 - total flux cleaned = 0.00224567 Jy ! Component: 2400 - total flux cleaned = 0.00228514 Jy ! Component: 2450 - total flux cleaned = 0.00231102 Jy ! Component: 2500 - total flux cleaned = 0.00232396 Jy ! Component: 2550 - total flux cleaned = 0.00236228 Jy ! Component: 2600 - total flux cleaned = 0.00236228 Jy ! Component: 2650 - total flux cleaned = 0.00243754 Jy ! Component: 2700 - total flux cleaned = 0.00244985 Jy ! Component: 2750 - total flux cleaned = 0.00247438 Jy ! Component: 2800 - total flux cleaned = 0.00251108 Jy ! Component: 2850 - total flux cleaned = 0.00254749 Jy ! Component: 2900 - total flux cleaned = 0.00261977 Jy ! Component: 2950 - total flux cleaned = 0.00263178 Jy ! Component: 3000 - total flux cleaned = 0.00269117 Jy ! Component: 3050 - total flux cleaned = 0.00272667 Jy ! Component: 3100 - total flux cleaned = 0.00278529 Jy ! Component: 3150 - total flux cleaned = 0.00284366 Jy ! Component: 3200 - total flux cleaned = 0.00286685 Jy ! Component: 3250 - total flux cleaned = 0.00290141 Jy ! Component: 3300 - total flux cleaned = 0.00295882 Jy ! Component: 3350 - total flux cleaned = 0.00303888 Jy ! Component: 3400 - total flux cleaned = 0.00310718 Jy ! Component: 3450 - total flux cleaned = 0.00319788 Jy ! Component: 3500 - total flux cleaned = 0.00326566 Jy ! Component: 3550 - total flux cleaned = 0.00335555 Jy ! Component: 3600 - total flux cleaned = 0.00342268 Jy ! Component: 3650 - total flux cleaned = 0.0035118 Jy ! Component: 3700 - total flux cleaned = 0.00357834 Jy ! Component: 3750 - total flux cleaned = 0.00365556 Jy ! Component: 3800 - total flux cleaned = 0.00372151 Jy ! Component: 3850 - total flux cleaned = 0.00379817 Jy ! Component: 3900 - total flux cleaned = 0.00384184 Jy ! Component: 3950 - total flux cleaned = 0.00389621 Jy ! Component: 4000 - total flux cleaned = 0.00397203 Jy ! Component: 4050 - total flux cleaned = 0.00406926 Jy ! Total flux subtracted in 4096 components = 0.00414465 Jy ! Clean residual min=-0.000762 max=0.000710 Jy/beam ! Clean residual mean=0.000002 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.112353 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 389 components and 0.112353 Jy ![Exited script file: muppet] wmap "J1859-0121_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.555 x 18.72 at -9.978 degrees (North through East) ! Clean map min=-0.0013063 max=0.087102 Jy/beam ! Writing clean map to FITS file: J1859-0121_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0871017 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194861 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.671151 0.671151 1.3423 2.68461 5.36921 10.7384 21.4768 42.9537 85.9074 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.555 x 18.72 at -9.978 degrees (North through East) ! Clean map min=-0.0013063 max=0.087102 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1859-0121_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:05:26 2019