! Started logfile: J1858+0313_S_2017_09_26_pus_uvs.log on Sat May 11 13:05:29 2019 obs J1858+0313_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1858+0313_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.59675 visibilities/baseline/integration-bin. ! Found source: J1858+0313 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 25264 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1858+0313_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 604 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 749 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 604 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2128 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956431Jy sigma=0.007569 ! Fit after self-cal, rms=0.916071Jy sigma=0.007273 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=21.28 mas, bpa=-20.07 degrees ! Estimated noise=1531.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0612633 Jy ! Component: 100 - total flux cleaned = 0.0969962 Jy ! Total flux subtracted in 100 components = 0.0969962 Jy ! Clean residual min=-0.017718 max=0.026812 Jy/beam ! Clean residual mean=-0.000711 rms=0.008532 Jy/beam ! Combined flux in latest and established models = 0.0969961 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.0969961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179164Jy sigma=0.001454 ! Fit after self-cal, rms=0.178462Jy sigma=0.001449 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.46 mas, bmaj=20.02 mas, bpa=-19.37 degrees ! Estimated noise=662.011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0644683 Jy ! Component: 100 - total flux cleaned = 0.114884 Jy ! Component: 150 - total flux cleaned = 0.155196 Jy ! Component: 200 - total flux cleaned = 0.187802 Jy ! Total flux subtracted in 200 components = 0.187802 Jy ! Clean residual min=-0.030050 max=0.043024 Jy/beam ! Clean residual mean=-0.001138 rms=0.012089 Jy/beam ! Combined flux in latest and established models = 0.284798 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 141 components and 0.284798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142967Jy sigma=0.001128 ! Fit after self-cal, rms=0.140010Jy sigma=0.001107 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 2.81 HN 0.97 KP 1.32 ! LA 0.89 MK 1.51 NL 2.36 OV 2.77 ! PT 0.47 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 2.65 HN 0.97 KP 1.24 ! LA 0.84 MK 1.66 NL 2.50 OV 2.73 ! PT 0.46 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 2.60 HN 0.94 KP 1.19 ! LA 0.84 MK 1.50 NL 2.22 OV 2.21 ! PT 0.46 ! ! ! Correcting IF 4. ! A total of 462 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00 KP 1.00* ! LA 1.00* MK 0.57 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.140010Jy sigma=0.001107 ! Fit after self-cal, rms=0.263073Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.76 mas, bmaj=25.51 mas, bpa=-19.28 degrees ! Estimated noise=878.857 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323989 Jy ! Component: 100 - total flux cleaned = 0.00438658 Jy ! Component: 150 - total flux cleaned = 0.00510877 Jy ! Component: 200 - total flux cleaned = 0.0057672 Jy ! Total flux subtracted in 200 components = 0.0057672 Jy ! Clean residual min=-0.013352 max=0.010755 Jy/beam ! Clean residual mean=-0.000107 rms=0.004167 Jy/beam ! Combined flux in latest and established models = 0.290565 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 157 components and 0.290565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262738Jy sigma=0.000684 ! Fit after self-cal, rms=0.268753Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268753Jy sigma=0.000671 ! Fit after self-cal, rms=0.276696Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.804 mas, bmaj=24.78 mas, bpa=-19.64 degrees ! Estimated noise=843.013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557998 Jy ! Component: 100 - total flux cleaned = 0.00079516 Jy ! Component: 150 - total flux cleaned = 0.00106029 Jy ! Component: 200 - total flux cleaned = 0.00129378 Jy ! Total flux subtracted in 200 components = 0.00129378 Jy ! Clean residual min=-0.004061 max=0.003683 Jy/beam ! Clean residual mean=0.000039 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.291859 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 170 components and 0.291859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276634Jy sigma=0.000643 ! Fit after self-cal, rms=0.276842Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162372 Jy ! Component: 100 - total flux cleaned = 0.000767535 Jy ! Component: 150 - total flux cleaned = 0.00123647 Jy ! Component: 200 - total flux cleaned = 0.00154735 Jy ! Total flux subtracted in 200 components = 0.00154735 Jy ! Clean residual min=-0.003715 max=0.003660 Jy/beam ! Clean residual mean=0.000043 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.293406 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 175 components and 0.293406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276793Jy sigma=0.000642 ! Fit after self-cal, rms=0.276705Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276705Jy sigma=0.000642 ! Fit after self-cal, rms=0.273433Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.801 mas, bmaj=24.61 mas, bpa=-19.74 degrees ! Estimated noise=823.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000173589 Jy ! Component: 100 - total flux cleaned = 0.00025836 Jy ! Component: 150 - total flux cleaned = 0.000472221 Jy ! Component: 200 - total flux cleaned = 0.000712145 Jy ! Total flux subtracted in 200 components = 0.000712145 Jy ! Clean residual min=-0.003388 max=0.003364 Jy/beam ! Clean residual mean=0.000034 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.294118 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 177 components and 0.294118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273384Jy sigma=0.000641 ! Fit after self-cal, rms=0.273296Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114833 Jy ! Component: 100 - total flux cleaned = 0.000328242 Jy ! Component: 150 - total flux cleaned = 0.00058211 Jy ! Component: 200 - total flux cleaned = 0.000817403 Jy ! Total flux subtracted in 200 components = 0.000817403 Jy ! Clean residual min=-0.003411 max=0.003370 Jy/beam ! Clean residual mean=0.000038 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.294936 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 182 components and 0.294936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273246Jy sigma=0.000641 ! Fit after self-cal, rms=0.273164Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273164Jy sigma=0.000641 ! Fit after self-cal, rms=0.269286Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.08 mas, bmaj=24.94 mas, bpa=-21.93 degrees ! Estimated noise=854.718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114556 Jy ! Component: 100 - total flux cleaned = 0.000126057 Jy ! Component: 150 - total flux cleaned = 0.00033415 Jy ! Component: 200 - total flux cleaned = 0.000554035 Jy ! Total flux subtracted in 200 components = 0.000554035 Jy ! Clean residual min=-0.003594 max=0.003377 Jy/beam ! Clean residual mean=0.000046 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.29549 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 188 components and 0.29549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269248Jy sigma=0.000640 ! Fit after self-cal, rms=0.269132Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104956 Jy ! Component: 100 - total flux cleaned = 0.000119172 Jy ! Component: 150 - total flux cleaned = 0.000358059 Jy ! Component: 200 - total flux cleaned = 0.000502771 Jy ! Total flux subtracted in 200 components = 0.000502771 Jy ! Clean residual min=-0.003629 max=0.003422 Jy/beam ! Clean residual mean=0.000050 rms=0.001149 Jy/beam ! Combined flux in latest and established models = 0.295992 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 194 components and 0.295992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269088Jy sigma=0.000640 ! Fit after self-cal, rms=0.269020Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.794 mas, bmaj=24.51 mas, bpa=-19.73 degrees ! Estimated noise=810.276 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.794 x 24.51 at -19.73 degrees (North through East) ! Clean map min=-0.0032217 max=0.070964 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=24.53 mas, bpa=-19.75 degrees ! Estimated noise=1957.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0692763 Jy ! Component: 100 - total flux cleaned = 0.11403 Jy ! Component: 150 - total flux cleaned = 0.148151 Jy ! Component: 200 - total flux cleaned = 0.174823 Jy ! Total flux subtracted in 200 components = 0.174823 Jy ! Clean residual min=-0.013694 max=0.017588 Jy/beam ! Clean residual mean=-0.000394 rms=0.005222 Jy/beam ! Combined flux in latest and established models = 0.174823 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 78 model components to the UV plane model. ! The established model now contains 78 components and 0.174823 Jy ! Inverting map and beam ! Estimated beam: bmin=4.794 mas, bmaj=24.51 mas, bpa=-19.73 degrees ! Estimated noise=810.276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383795 Jy ! Component: 100 - total flux cleaned = 0.0632079 Jy ! Component: 150 - total flux cleaned = 0.0798191 Jy ! Component: 200 - total flux cleaned = 0.0910614 Jy ! Total flux subtracted in 200 components = 0.0910614 Jy ! Clean residual min=-0.008295 max=0.009166 Jy/beam ! Clean residual mean=-0.000169 rms=0.002469 Jy/beam ! Combined flux in latest and established models = 0.265884 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 138 components and 0.265884 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.08 mas, bmaj=24.94 mas, bpa=-21.93 degrees ! Estimated noise=854.718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010048 Jy ! Component: 100 - total flux cleaned = 0.01622 Jy ! Component: 150 - total flux cleaned = 0.0202721 Jy ! Component: 200 - total flux cleaned = 0.0216035 Jy ! Total flux subtracted in 200 components = 0.0216035 Jy ! Clean residual min=-0.005632 max=0.005714 Jy/beam ! Clean residual mean=-0.000021 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.287488 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757399 Jy ! Component: 100 - total flux cleaned = 0.00136104 Jy ! Component: 150 - total flux cleaned = 0.00201223 Jy ! Component: 200 - total flux cleaned = 0.00253024 Jy ! Total flux subtracted in 200 components = 0.00253024 Jy ! Clean residual min=-0.005012 max=0.005408 Jy/beam ! Clean residual mean=0.000001 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 0.290018 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 168 components and 0.290018 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.794 mas, bmaj=24.51 mas, bpa=-19.73 degrees ! Estimated noise=810.276 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221512 Jy ! Component: 100 - total flux cleaned = 0.000558272 Jy ! Component: 150 - total flux cleaned = 0.00085965 Jy ! Component: 200 - total flux cleaned = 0.00104363 Jy ! Total flux subtracted in 200 components = 0.00104363 Jy ! Clean residual min=-0.004282 max=0.004968 Jy/beam ! Clean residual mean=0.000010 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.291062 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 185 components and 0.291062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269341Jy sigma=0.000643 ! Fit after self-cal, rms=0.269150Jy sigma=0.000642 wmodel J1858+0313_S_2017_09_26_pus_map.mod ! Writing 185 model components to file: J1858+0313_S_2017_09_26_pus_map.mod wobs J1858+0313_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1858+0313_S_2017_09_26_pus_uvs.fits wwins J1858+0313_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1858+0313_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109777 Jy ! Component: 100 - total flux cleaned = 0.000847362 Jy ! Component: 150 - total flux cleaned = 0.000672111 Jy ! Component: 200 - total flux cleaned = 0.000391084 Jy ! Component: 250 - total flux cleaned = 6.94737e-05 Jy ! Component: 300 - total flux cleaned = -0.000134549 Jy ! Component: 350 - total flux cleaned = -0.000282858 Jy ! Component: 400 - total flux cleaned = -0.000380398 Jy ! Component: 450 - total flux cleaned = -0.000613957 Jy ! Component: 500 - total flux cleaned = -0.000840297 Jy ! Component: 550 - total flux cleaned = -0.00101541 Jy ! Component: 600 - total flux cleaned = -0.00118584 Jy ! Component: 650 - total flux cleaned = -0.0013935 Jy ! Component: 700 - total flux cleaned = -0.00151496 Jy ! Component: 750 - total flux cleaned = -0.00167341 Jy ! Component: 800 - total flux cleaned = -0.00175013 Jy ! Component: 850 - total flux cleaned = -0.00178805 Jy ! Component: 900 - total flux cleaned = -0.00186094 Jy ! Component: 950 - total flux cleaned = -0.00189686 Jy ! Component: 1000 - total flux cleaned = -0.00200088 Jy ! Component: 1050 - total flux cleaned = -0.00206805 Jy ! Component: 1100 - total flux cleaned = -0.00213398 Jy ! Component: 1150 - total flux cleaned = -0.00216644 Jy ! Component: 1200 - total flux cleaned = -0.00229379 Jy ! Component: 1250 - total flux cleaned = -0.00232531 Jy ! Component: 1300 - total flux cleaned = -0.00241794 Jy ! Component: 1350 - total flux cleaned = -0.00238775 Jy ! Component: 1400 - total flux cleaned = -0.00238864 Jy ! Component: 1450 - total flux cleaned = -0.0023891 Jy ! Component: 1500 - total flux cleaned = -0.00230256 Jy ! Component: 1550 - total flux cleaned = -0.00218857 Jy ! Component: 1600 - total flux cleaned = -0.00204793 Jy ! Component: 1650 - total flux cleaned = -0.00188124 Jy ! Component: 1700 - total flux cleaned = -0.00171693 Jy ! Component: 1750 - total flux cleaned = -0.00155488 Jy ! Component: 1800 - total flux cleaned = -0.00134124 Jy ! Component: 1850 - total flux cleaned = -0.00120932 Jy ! Component: 1900 - total flux cleaned = -0.00107905 Jy ! Component: 1950 - total flux cleaned = -0.00100186 Jy ! Component: 2000 - total flux cleaned = -0.000925721 Jy ! Component: 2050 - total flux cleaned = -0.000875485 Jy ! Component: 2100 - total flux cleaned = -0.000850575 Jy ! Component: 2150 - total flux cleaned = -0.000899914 Jy ! Component: 2200 - total flux cleaned = -0.000851388 Jy ! Component: 2250 - total flux cleaned = -0.000851446 Jy ! Component: 2300 - total flux cleaned = -0.000827412 Jy ! Component: 2350 - total flux cleaned = -0.000756686 Jy ! Component: 2400 - total flux cleaned = -0.000780424 Jy ! Component: 2450 - total flux cleaned = -0.000803802 Jy ! Component: 2500 - total flux cleaned = -0.000781047 Jy ! Component: 2550 - total flux cleaned = -0.000826774 Jy ! Component: 2600 - total flux cleaned = -0.000894423 Jy ! Component: 2650 - total flux cleaned = -0.000984014 Jy ! Component: 2700 - total flux cleaned = -0.00107256 Jy ! Component: 2750 - total flux cleaned = -0.00116054 Jy ! Component: 2800 - total flux cleaned = -0.00116043 Jy ! Component: 2850 - total flux cleaned = -0.00129056 Jy ! Component: 2900 - total flux cleaned = -0.00135495 Jy ! Component: 2950 - total flux cleaned = -0.00141922 Jy ! Component: 3000 - total flux cleaned = -0.00154628 Jy ! Component: 3050 - total flux cleaned = -0.00167262 Jy ! Component: 3100 - total flux cleaned = -0.0016935 Jy ! Component: 3150 - total flux cleaned = -0.00169358 Jy ! Component: 3200 - total flux cleaned = -0.00177637 Jy ! Component: 3250 - total flux cleaned = -0.0018176 Jy ! Component: 3300 - total flux cleaned = -0.00192011 Jy ! Component: 3350 - total flux cleaned = -0.00198111 Jy ! Component: 3400 - total flux cleaned = -0.00206229 Jy ! Component: 3450 - total flux cleaned = -0.00222394 Jy ! Component: 3500 - total flux cleaned = -0.002224 Jy ! Component: 3550 - total flux cleaned = -0.00236457 Jy ! Component: 3600 - total flux cleaned = -0.00246464 Jy ! Component: 3650 - total flux cleaned = -0.00266389 Jy ! Component: 3700 - total flux cleaned = -0.00280298 Jy ! Component: 3750 - total flux cleaned = -0.00294161 Jy ! Component: 3800 - total flux cleaned = -0.0031392 Jy ! Component: 3850 - total flux cleaned = -0.00331659 Jy ! Component: 3900 - total flux cleaned = -0.00347384 Jy ! Component: 3950 - total flux cleaned = -0.00365026 Jy ! Component: 4000 - total flux cleaned = -0.00378717 Jy ! Component: 4050 - total flux cleaned = -0.00396281 Jy ! Total flux subtracted in 4096 components = -0.00407965 Jy ! Clean residual min=-0.001106 max=0.001134 Jy/beam ! Clean residual mean=0.000008 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.286982 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 494 components and 0.286982 Jy ![Exited script file: muppet] wmap "J1858+0313_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.794 x 24.51 at -19.73 degrees (North through East) ! Clean map min=-0.0029045 max=0.071406 Jy/beam ! Writing clean map to FITS file: J1858+0313_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0714062 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000385019 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.61759 1.61759 3.23518 6.47035 12.9407 25.8814 51.7628 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.794 x 24.51 at -19.73 degrees (North through East) ! Clean map min=-0.0029045 max=0.071406 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1858+0313_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:05:35 2019