! Started logfile: J1858+0313_S_2017_02_24_pus_uvs.log on Sat May 4 11:33:42 2019 obs J1858+0313_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1858+0313_S_2017_02_24_pus_uva.fits ! AN table 1: 216 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.615844 visibilities/baseline/integration-bin. ! Found source: J1858+0313 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 23944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1858+0313_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1067 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978021Jy sigma=0.007828 ! Fit after self-cal, rms=0.939729Jy sigma=0.007526 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=7.44 mas, bpa=-8.651 degrees ! Estimated noise=986.083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0396242 Jy ! Component: 100 - total flux cleaned = 0.0537754 Jy ! Total flux subtracted in 100 components = 0.0537754 Jy ! Clean residual min=-0.008364 max=0.012182 Jy/beam ! Clean residual mean=-0.000299 rms=0.003351 Jy/beam ! Combined flux in latest and established models = 0.0537754 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0537754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162589Jy sigma=0.001146 ! Fit after self-cal, rms=0.162012Jy sigma=0.001141 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=8.999 mas, bpa=-7.583 degrees ! Estimated noise=621.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351556 Jy ! Component: 100 - total flux cleaned = 0.0564682 Jy ! Component: 150 - total flux cleaned = 0.0694558 Jy ! Component: 200 - total flux cleaned = 0.0773712 Jy ! Total flux subtracted in 200 components = 0.0773712 Jy ! Clean residual min=-0.027380 max=0.038365 Jy/beam ! Clean residual mean=-0.000537 rms=0.009765 Jy/beam ! Combined flux in latest and established models = 0.131147 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 47 components and 0.131147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153712Jy sigma=0.001060 ! Fit after self-cal, rms=0.153129Jy sigma=0.001055 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.49 FD 5.16 HN 3.63 KP 1.14 ! LA 0.70 MK 2.25 NL 4.71 OV 5.57 ! PT 0.37 SC 2.09 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.67 FD 4.31 HN 3.00 KP 1.05 ! LA 0.66 MK 2.42 NL 4.16 OV 6.05 ! PT 0.37 SC 2.21 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.24 FD 4.77 HN 2.97 KP 1.12 ! LA 0.73 MK 2.55 NL 4.58 OV 5.47 ! PT 0.36 SC 2.24 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.55 FD 3.26 HN 1.75 KP 1.00* ! LA 0.46 MK 1.59 NL 1.00* OV 3.96 ! PT 0.50 SC 1.00* ! ! ! Fit before self-cal, rms=0.153129Jy sigma=0.001055 ! Fit after self-cal, rms=0.830075Jy sigma=0.000688 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.257 mas, bmaj=12.05 mas, bpa=-7.921 degrees ! Estimated noise=1008.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156724 Jy ! Component: 100 - total flux cleaned = 0.0149907 Jy ! Component: 150 - total flux cleaned = 0.0141337 Jy ! Component: 200 - total flux cleaned = 0.0133883 Jy ! Total flux subtracted in 200 components = 0.0133883 Jy ! Clean residual min=-0.014543 max=0.016558 Jy/beam ! Clean residual mean=-0.000000 rms=0.004069 Jy/beam ! Combined flux in latest and established models = 0.144535 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.144535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.824856Jy sigma=0.000705 ! Fit after self-cal, rms=0.842560Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.842560Jy sigma=0.000672 ! Fit after self-cal, rms=1.101195Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.828 mas, bmaj=13 mas, bpa=-8.179 degrees ! Estimated noise=1186.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488777 Jy ! Component: 100 - total flux cleaned = 0.00466989 Jy ! Component: 150 - total flux cleaned = 0.00447725 Jy ! Component: 200 - total flux cleaned = 0.0043005 Jy ! Total flux subtracted in 200 components = 0.0043005 Jy ! Clean residual min=-0.005142 max=0.005623 Jy/beam ! Clean residual mean=0.000065 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.148835 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.148835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.100835Jy sigma=0.000650 ! Fit after self-cal, rms=1.102128Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199592 Jy ! Component: 100 - total flux cleaned = -0.00203806 Jy ! Component: 150 - total flux cleaned = -0.00211496 Jy ! Component: 200 - total flux cleaned = -0.00218583 Jy ! Total flux subtracted in 200 components = -0.00218583 Jy ! Clean residual min=-0.004712 max=0.004724 Jy/beam ! Clean residual mean=0.000042 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.14665 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.14665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.102101Jy sigma=0.000649 ! Fit after self-cal, rms=1.102061Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.102061Jy sigma=0.000649 ! Fit after self-cal, rms=1.265631Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.085 mas, bmaj=13.76 mas, bpa=-9.149 degrees ! Estimated noise=1246.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340969 Jy ! Component: 100 - total flux cleaned = 0.00320061 Jy ! Component: 150 - total flux cleaned = 0.00293164 Jy ! Component: 200 - total flux cleaned = 0.00277349 Jy ! Total flux subtracted in 200 components = 0.00277349 Jy ! Clean residual min=-0.004297 max=0.004892 Jy/beam ! Clean residual mean=0.000045 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.149423 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 63 components and 0.149423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.265389Jy sigma=0.000647 ! Fit after self-cal, rms=1.265935Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000645152 Jy ! Component: 100 - total flux cleaned = -0.000751165 Jy ! Component: 150 - total flux cleaned = -0.000847594 Jy ! Component: 200 - total flux cleaned = -0.000937085 Jy ! Total flux subtracted in 200 components = -0.000937085 Jy ! Clean residual min=-0.004300 max=0.004408 Jy/beam ! Clean residual mean=0.000035 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.148486 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 64 components and 0.148486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.265884Jy sigma=0.000647 ! Fit after self-cal, rms=1.265858Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.265858Jy sigma=0.000647 ! Fit after self-cal, rms=1.403856Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.7 mas, bmaj=20.72 mas, bpa=-4.825 degrees ! Estimated noise=1074.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211496 Jy ! Component: 100 - total flux cleaned = 0.00211946 Jy ! Component: 150 - total flux cleaned = 0.00212162 Jy ! Component: 200 - total flux cleaned = 0.00208636 Jy ! Total flux subtracted in 200 components = 0.00208636 Jy ! Clean residual min=-0.003281 max=0.003409 Jy/beam ! Clean residual mean=0.000048 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.150572 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 65 components and 0.150572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.403730Jy sigma=0.000647 ! Fit after self-cal, rms=1.404047Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234235 Jy ! Component: 100 - total flux cleaned = -0.000234557 Jy ! Component: 150 - total flux cleaned = -0.000233965 Jy ! Component: 200 - total flux cleaned = -0.000285321 Jy ! Total flux subtracted in 200 components = -0.000285321 Jy ! Clean residual min=-0.003365 max=0.003364 Jy/beam ! Clean residual mean=0.000045 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.150287 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 66 components and 0.150287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.404011Jy sigma=0.000647 ! Fit after self-cal, rms=1.404031Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.236 mas, bmaj=14.36 mas, bpa=-9.914 degrees ! Estimated noise=1296.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.236 x 14.36 at -9.914 degrees (North through East) ! Clean map min=-0.0041581 max=0.11757 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.993 mas, bmaj=9.701 mas, bpa=-9.417 degrees ! Estimated noise=3301.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0950943 Jy ! Component: 100 - total flux cleaned = 0.122539 Jy ! Component: 150 - total flux cleaned = 0.1362 Jy ! Component: 200 - total flux cleaned = 0.143734 Jy ! Total flux subtracted in 200 components = 0.143734 Jy ! Clean residual min=-0.010035 max=0.012553 Jy/beam ! Clean residual mean=-0.000026 rms=0.002537 Jy/beam ! Combined flux in latest and established models = 0.143734 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.143734 Jy ! Inverting map and beam ! Estimated beam: bmin=6.236 mas, bmaj=14.36 mas, bpa=-9.914 degrees ! Estimated noise=1296.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394631 Jy ! Component: 100 - total flux cleaned = 0.00441096 Jy ! Component: 150 - total flux cleaned = 0.00453536 Jy ! Component: 200 - total flux cleaned = 0.00464384 Jy ! Total flux subtracted in 200 components = 0.00464384 Jy ! Clean residual min=-0.005190 max=0.004894 Jy/beam ! Clean residual mean=0.000020 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.148377 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 19 components and 0.148377 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.7 mas, bmaj=20.72 mas, bpa=-4.825 degrees ! Estimated noise=1074.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226173 Jy ! Component: 100 - total flux cleaned = 0.000296207 Jy ! Component: 150 - total flux cleaned = 0.000327151 Jy ! Component: 200 - total flux cleaned = 0.000382963 Jy ! Total flux subtracted in 200 components = 0.000382963 Jy ! Clean residual min=-0.003810 max=0.003432 Jy/beam ! Clean residual mean=0.000029 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.14876 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.44914e-05 Jy ! Component: 100 - total flux cleaned = 6.95131e-05 Jy ! Component: 150 - total flux cleaned = 9.08644e-05 Jy ! Component: 200 - total flux cleaned = 0.000129973 Jy ! Total flux subtracted in 200 components = 0.000129973 Jy ! Clean residual min=-0.003730 max=0.003414 Jy/beam ! Clean residual mean=0.000030 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.14889 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 21 components and 0.14889 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.236 mas, bmaj=14.36 mas, bpa=-9.914 degrees ! Estimated noise=1296.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212836 Jy ! Component: 100 - total flux cleaned = -0.000168418 Jy ! Component: 150 - total flux cleaned = -9.12189e-05 Jy ! Component: 200 - total flux cleaned = -2.42922e-05 Jy ! Total flux subtracted in 200 components = -2.42922e-05 Jy ! Clean residual min=-0.004990 max=0.004825 Jy/beam ! Clean residual mean=0.000024 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.148866 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.148866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.403784Jy sigma=0.000647 ! Fit after self-cal, rms=1.403498Jy sigma=0.000647 wmodel J1858+0313_S_2017_02_24_pus_map.mod ! Writing 29 model components to file: J1858+0313_S_2017_02_24_pus_map.mod wobs J1858+0313_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1858+0313_S_2017_02_24_pus_uvs.fits wwins J1858+0313_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J1858+0313_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.76825e-05 Jy ! Component: 100 - total flux cleaned = 6.45031e-05 Jy ! Component: 150 - total flux cleaned = 0.000295368 Jy ! Component: 200 - total flux cleaned = 0.000600442 Jy ! Component: 250 - total flux cleaned = 0.000674966 Jy ! Component: 300 - total flux cleaned = 0.000384483 Jy ! Component: 350 - total flux cleaned = 0.000169875 Jy ! Component: 400 - total flux cleaned = -0.000182831 Jy ! Component: 450 - total flux cleaned = -0.000529851 Jy ! Component: 500 - total flux cleaned = -0.000939858 Jy ! Component: 550 - total flux cleaned = -0.0011417 Jy ! Component: 600 - total flux cleaned = -0.00127437 Jy ! Component: 650 - total flux cleaned = -0.00140538 Jy ! Component: 700 - total flux cleaned = -0.00147052 Jy ! Component: 750 - total flux cleaned = -0.00134235 Jy ! Component: 800 - total flux cleaned = -0.00115315 Jy ! Component: 850 - total flux cleaned = -0.00102774 Jy ! Component: 900 - total flux cleaned = -0.000780263 Jy ! Component: 950 - total flux cleaned = -0.000596737 Jy ! Component: 1000 - total flux cleaned = -0.000475255 Jy ! Component: 1050 - total flux cleaned = -0.00047546 Jy ! Component: 1100 - total flux cleaned = -0.000416693 Jy ! Component: 1150 - total flux cleaned = -0.000594288 Jy ! Component: 1200 - total flux cleaned = -0.000535455 Jy ! Component: 1250 - total flux cleaned = -0.000651478 Jy ! Component: 1300 - total flux cleaned = -0.000652005 Jy ! Component: 1350 - total flux cleaned = -0.000709035 Jy ! Component: 1400 - total flux cleaned = -0.000652378 Jy ! Component: 1450 - total flux cleaned = -0.000653094 Jy ! Component: 1500 - total flux cleaned = -0.000820923 Jy ! Component: 1550 - total flux cleaned = -0.000710468 Jy ! Component: 1600 - total flux cleaned = -0.000765322 Jy ! Component: 1650 - total flux cleaned = -0.000819568 Jy ! Component: 1700 - total flux cleaned = -0.00103557 Jy ! Component: 1750 - total flux cleaned = -0.00108898 Jy ! Component: 1800 - total flux cleaned = -0.00124879 Jy ! Component: 1850 - total flux cleaned = -0.00135487 Jy ! Component: 1900 - total flux cleaned = -0.00140771 Jy ! Component: 1950 - total flux cleaned = -0.00135611 Jy ! Component: 2000 - total flux cleaned = -0.00130421 Jy ! Component: 2050 - total flux cleaned = -0.00125204 Jy ! Component: 2100 - total flux cleaned = -0.00120075 Jy ! Component: 2150 - total flux cleaned = -0.00114943 Jy ! Component: 2200 - total flux cleaned = -0.00109826 Jy ! Component: 2250 - total flux cleaned = -0.00109779 Jy ! Component: 2300 - total flux cleaned = -0.00104683 Jy ! Component: 2350 - total flux cleaned = -0.000745423 Jy ! Component: 2400 - total flux cleaned = -0.000595598 Jy ! Component: 2450 - total flux cleaned = -0.000296957 Jy ! Component: 2500 - total flux cleaned = -4.94745e-05 Jy ! Component: 2550 - total flux cleaned = 1.84427e-08 Jy ! Component: 2600 - total flux cleaned = 0.000294975 Jy ! Component: 2650 - total flux cleaned = 0.000441822 Jy ! Component: 2700 - total flux cleaned = 0.000832148 Jy ! Component: 2750 - total flux cleaned = 0.000977997 Jy ! Component: 2800 - total flux cleaned = 0.00117193 Jy ! Component: 2850 - total flux cleaned = 0.00122072 Jy ! Component: 2900 - total flux cleaned = 0.0016069 Jy ! Component: 2950 - total flux cleaned = 0.00179936 Jy ! Component: 3000 - total flux cleaned = 0.00208757 Jy ! Component: 3050 - total flux cleaned = 0.00251875 Jy ! Component: 3100 - total flux cleaned = 0.00285359 Jy ! Component: 3150 - total flux cleaned = 0.00337836 Jy ! Component: 3200 - total flux cleaned = 0.00385484 Jy ! Component: 3250 - total flux cleaned = 0.0042831 Jy ! Component: 3300 - total flux cleaned = 0.00490084 Jy ! Component: 3350 - total flux cleaned = 0.00556475 Jy ! Component: 3400 - total flux cleaned = 0.00594396 Jy ! Component: 3450 - total flux cleaned = 0.00651174 Jy ! Component: 3500 - total flux cleaned = 0.00703164 Jy ! Component: 3550 - total flux cleaned = 0.00750396 Jy ! Component: 3600 - total flux cleaned = 0.00792838 Jy ! Component: 3650 - total flux cleaned = 0.00839949 Jy ! Component: 3700 - total flux cleaned = 0.00891722 Jy ! Component: 3750 - total flux cleaned = 0.0093405 Jy ! Component: 3800 - total flux cleaned = 0.00981057 Jy ! Component: 3850 - total flux cleaned = 0.010421 Jy ! Component: 3900 - total flux cleaned = 0.0108432 Jy ! Component: 3950 - total flux cleaned = 0.0113592 Jy ! Component: 4000 - total flux cleaned = 0.0118287 Jy ! Component: 4050 - total flux cleaned = 0.012204 Jy ! Total flux subtracted in 4096 components = 0.0125324 Jy ! Clean residual min=-0.002346 max=0.002527 Jy/beam ! Clean residual mean=0.000030 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.161398 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 162 components and 0.161398 Jy ![Exited script file: muppet] wmap "J1858+0313_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.236 x 14.36 at -9.914 degrees (North through East) ! Clean map min=-0.0073118 max=0.12779 Jy/beam ! Writing clean map to FITS file: J1858+0313_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127791 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000761513 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.78772 1.78772 3.57544 7.15087 14.3017 28.6035 57.207 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.236 x 14.36 at -9.914 degrees (North through East) ! Clean map min=-0.0073118 max=0.12779 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1858+0313_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:33:48 2019