! Started logfile: J1855+0251_S_2017_09_26_pus_uvs.log on Sat May 11 13:05:24 2019 obs J1855+0251_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1855+0251_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.544256 visibilities/baseline/integration-bin. ! Found source: J1855+0251 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 23120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1855+0251_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 727 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 995 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 815 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2370 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964801Jy sigma=0.007345 ! Fit after self-cal, rms=0.936366Jy sigma=0.007150 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.394 mas, bmaj=15.44 mas, bpa=-22.31 degrees ! Estimated noise=1470.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471707 Jy ! Component: 100 - total flux cleaned = 0.0617956 Jy ! Total flux subtracted in 100 components = 0.0617956 Jy ! Clean residual min=-0.006175 max=0.008007 Jy/beam ! Clean residual mean=-0.000089 rms=0.002048 Jy/beam ! Combined flux in latest and established models = 0.0617956 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0617956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096643Jy sigma=0.000667 ! Fit after self-cal, rms=0.095726Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.238 mas, bmaj=17.36 mas, bpa=-20.84 degrees ! Estimated noise=766.487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014838 Jy ! Component: 100 - total flux cleaned = 0.0241163 Jy ! Component: 150 - total flux cleaned = 0.0304786 Jy ! Component: 200 - total flux cleaned = 0.0349817 Jy ! Total flux subtracted in 200 components = 0.0349817 Jy ! Clean residual min=-0.004887 max=0.007224 Jy/beam ! Clean residual mean=-0.000090 rms=0.001747 Jy/beam ! Combined flux in latest and established models = 0.0967773 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 80 components and 0.0967773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093358Jy sigma=0.000638 ! Fit after self-cal, rms=0.093139Jy sigma=0.000636 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 HN 1.06 KP 1.02 ! LA 0.96 MK 1.05 NL 1.32 OV 1.32 ! PT 0.86 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.18 KP 0.94 ! LA 0.88 MK 1.04 NL 1.46 OV 1.36 ! PT 0.83 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.03 KP 0.95 ! LA 0.89 MK 1.12 NL 1.22 OV 1.19 ! PT 0.86 ! ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 0.84 KP 1.00* ! LA 1.00* MK 0.89 NL 1.00* OV 1.00* ! PT 0.88 ! ! ! Fit before self-cal, rms=0.093139Jy sigma=0.000636 ! Fit after self-cal, rms=0.098411Jy sigma=0.000628 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.366 mas, bmaj=17.74 mas, bpa=-20.62 degrees ! Estimated noise=785.575 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132515 Jy ! Component: 100 - total flux cleaned = 0.0014803 Jy ! Component: 150 - total flux cleaned = 0.00148009 Jy ! Component: 200 - total flux cleaned = 0.00150909 Jy ! Total flux subtracted in 200 components = 0.00150909 Jy ! Clean residual min=-0.002899 max=0.003994 Jy/beam ! Clean residual mean=-0.000020 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.0982864 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.0982864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098381Jy sigma=0.000628 ! Fit after self-cal, rms=0.098974Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098974Jy sigma=0.000626 ! Fit after self-cal, rms=0.100663Jy sigma=0.000625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.313 mas, bmaj=17.66 mas, bpa=-20.72 degrees ! Estimated noise=792.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000800925 Jy ! Component: 100 - total flux cleaned = 0.000862176 Jy ! Component: 150 - total flux cleaned = 0.000863523 Jy ! Component: 200 - total flux cleaned = 0.000863822 Jy ! Total flux subtracted in 200 components = 0.000863822 Jy ! Clean residual min=-0.002521 max=0.003163 Jy/beam ! Clean residual mean=-0.000018 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.0991502 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 0.0991502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100649Jy sigma=0.000625 ! Fit after self-cal, rms=0.100724Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.44885e-06 Jy ! Component: 100 - total flux cleaned = 4.10076e-05 Jy ! Component: 150 - total flux cleaned = 6.44465e-05 Jy ! Component: 200 - total flux cleaned = 0.000107058 Jy ! Total flux subtracted in 200 components = 0.000107058 Jy ! Clean residual min=-0.002531 max=0.002957 Jy/beam ! Clean residual mean=-0.000021 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.0992573 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 99 components and 0.0992573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100713Jy sigma=0.000625 ! Fit after self-cal, rms=0.100712Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100712Jy sigma=0.000625 ! Fit after self-cal, rms=0.100158Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.264 mas, bmaj=17.61 mas, bpa=-20.78 degrees ! Estimated noise=789.864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556567 Jy ! Component: 100 - total flux cleaned = 0.000556109 Jy ! Component: 150 - total flux cleaned = 0.000577452 Jy ! Component: 200 - total flux cleaned = 0.000596362 Jy ! Total flux subtracted in 200 components = 0.000596362 Jy ! Clean residual min=-0.002527 max=0.002987 Jy/beam ! Clean residual mean=-0.000017 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.0998537 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 101 components and 0.0998537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100148Jy sigma=0.000625 ! Fit after self-cal, rms=0.100140Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.75267e-05 Jy ! Component: 100 - total flux cleaned = 2.77675e-05 Jy ! Component: 150 - total flux cleaned = 4.76336e-05 Jy ! Component: 200 - total flux cleaned = 4.79856e-05 Jy ! Total flux subtracted in 200 components = 4.79856e-05 Jy ! Clean residual min=-0.002576 max=0.002945 Jy/beam ! Clean residual mean=-0.000017 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0999017 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 103 components and 0.0999017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100132Jy sigma=0.000625 ! Fit after self-cal, rms=0.100131Jy sigma=0.000625 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100131Jy sigma=0.000625 ! Fit after self-cal, rms=0.099595Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.83 mas, bmaj=18.82 mas, bpa=-11.99 degrees ! Estimated noise=834.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057942 Jy ! Component: 100 - total flux cleaned = 0.000561262 Jy ! Component: 150 - total flux cleaned = 0.0005779 Jy ! Component: 200 - total flux cleaned = 0.000593942 Jy ! Total flux subtracted in 200 components = 0.000593942 Jy ! Clean residual min=-0.002622 max=0.002943 Jy/beam ! Clean residual mean=-0.000021 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.100496 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 107 components and 0.100496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099588Jy sigma=0.000625 ! Fit after self-cal, rms=0.099588Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175268 Jy ! Component: 100 - total flux cleaned = 0.000157585 Jy ! Component: 150 - total flux cleaned = 0.000157393 Jy ! Component: 200 - total flux cleaned = 0.000172257 Jy ! Total flux subtracted in 200 components = 0.000172257 Jy ! Clean residual min=-0.002639 max=0.002937 Jy/beam ! Clean residual mean=-0.000020 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.100668 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 111 components and 0.100668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099584Jy sigma=0.000625 ! Fit after self-cal, rms=0.099591Jy sigma=0.000625 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.228 mas, bmaj=17.61 mas, bpa=-20.83 degrees ! Estimated noise=788.023 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.228 x 17.61 at -20.83 degrees (North through East) ! Clean map min=-0.0025562 max=0.05574 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=14.91 mas, bpa=-22.25 degrees ! Estimated noise=1492.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472173 Jy ! Component: 100 - total flux cleaned = 0.0637674 Jy ! Component: 150 - total flux cleaned = 0.0738536 Jy ! Component: 200 - total flux cleaned = 0.0807546 Jy ! Total flux subtracted in 200 components = 0.0807546 Jy ! Clean residual min=-0.004584 max=0.004991 Jy/beam ! Clean residual mean=-0.000042 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.0807546 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.0807546 Jy ! Inverting map and beam ! Estimated beam: bmin=5.228 mas, bmaj=17.61 mas, bpa=-20.83 degrees ! Estimated noise=788.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683711 Jy ! Component: 100 - total flux cleaned = 0.0108686 Jy ! Component: 150 - total flux cleaned = 0.0134714 Jy ! Component: 200 - total flux cleaned = 0.0151683 Jy ! Total flux subtracted in 200 components = 0.0151683 Jy ! Clean residual min=-0.003058 max=0.003377 Jy/beam ! Clean residual mean=-0.000033 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.0959229 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 80 components and 0.0959229 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.83 mas, bmaj=18.82 mas, bpa=-11.99 degrees ! Estimated noise=834.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143287 Jy ! Component: 100 - total flux cleaned = 0.00183267 Jy ! Component: 150 - total flux cleaned = 0.00201126 Jy ! Component: 200 - total flux cleaned = 0.00211166 Jy ! Total flux subtracted in 200 components = 0.00211166 Jy ! Clean residual min=-0.002985 max=0.003117 Jy/beam ! Clean residual mean=-0.000034 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.0980345 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.54321e-05 Jy ! Component: 100 - total flux cleaned = 0.000156497 Jy ! Component: 150 - total flux cleaned = 0.000244156 Jy ! Component: 200 - total flux cleaned = 0.000327708 Jy ! Total flux subtracted in 200 components = 0.000327708 Jy ! Clean residual min=-0.002946 max=0.003054 Jy/beam ! Clean residual mean=-0.000032 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.0983622 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.0983622 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.228 mas, bmaj=17.61 mas, bpa=-20.83 degrees ! Estimated noise=788.023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000236643 Jy ! Component: 100 - total flux cleaned = -0.000146654 Jy ! Component: 150 - total flux cleaned = -9.07531e-05 Jy ! Component: 200 - total flux cleaned = -1.11241e-05 Jy ! Total flux subtracted in 200 components = -1.11241e-05 Jy ! Clean residual min=-0.002842 max=0.002859 Jy/beam ! Clean residual mean=-0.000024 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0983511 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 102 components and 0.0983511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099629Jy sigma=0.000625 ! Fit after self-cal, rms=0.099571Jy sigma=0.000625 wmodel J1855+0251_S_2017_09_26_pus_map.mod ! Writing 102 model components to file: J1855+0251_S_2017_09_26_pus_map.mod wobs J1855+0251_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1855+0251_S_2017_09_26_pus_uvs.fits wwins J1855+0251_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1855+0251_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665937 Jy ! Component: 100 - total flux cleaned = 0.00150795 Jy ! Component: 150 - total flux cleaned = 0.00212055 Jy ! Component: 200 - total flux cleaned = 0.00268738 Jy ! Component: 250 - total flux cleaned = 0.00317871 Jy ! Component: 300 - total flux cleaned = 0.00364265 Jy ! Component: 350 - total flux cleaned = 0.00395948 Jy ! Component: 400 - total flux cleaned = 0.00417106 Jy ! Component: 450 - total flux cleaned = 0.00431605 Jy ! Component: 500 - total flux cleaned = 0.0044826 Jy ! Component: 550 - total flux cleaned = 0.00469565 Jy ! Component: 600 - total flux cleaned = 0.00484863 Jy ! Component: 650 - total flux cleaned = 0.00499573 Jy ! Component: 700 - total flux cleaned = 0.00511405 Jy ! Component: 750 - total flux cleaned = 0.00522906 Jy ! Component: 800 - total flux cleaned = 0.00540521 Jy ! Component: 850 - total flux cleaned = 0.00542617 Jy ! Component: 900 - total flux cleaned = 0.00550833 Jy ! Component: 950 - total flux cleaned = 0.00562803 Jy ! Component: 1000 - total flux cleaned = 0.00570561 Jy ! Component: 1050 - total flux cleaned = 0.0057997 Jy ! Component: 1100 - total flux cleaned = 0.00589109 Jy ! Component: 1150 - total flux cleaned = 0.00594446 Jy ! Component: 1200 - total flux cleaned = 0.00604812 Jy ! Component: 1250 - total flux cleaned = 0.00614892 Jy ! Component: 1300 - total flux cleaned = 0.0062146 Jy ! Component: 1350 - total flux cleaned = 0.00632658 Jy ! Component: 1400 - total flux cleaned = 0.00645135 Jy ! Component: 1450 - total flux cleaned = 0.00661853 Jy ! Component: 1500 - total flux cleaned = 0.00669286 Jy ! Component: 1550 - total flux cleaned = 0.00683816 Jy ! Component: 1600 - total flux cleaned = 0.00689474 Jy ! Component: 1650 - total flux cleaned = 0.00695068 Jy ! Component: 1700 - total flux cleaned = 0.00699143 Jy ! Component: 1750 - total flux cleaned = 0.0070181 Jy ! Component: 1800 - total flux cleaned = 0.0070576 Jy ! Component: 1850 - total flux cleaned = 0.00708361 Jy ! Component: 1900 - total flux cleaned = 0.00712198 Jy ! Component: 1950 - total flux cleaned = 0.007172 Jy ! Component: 2000 - total flux cleaned = 0.0072212 Jy ! Component: 2050 - total flux cleaned = 0.00724525 Jy ! Component: 2100 - total flux cleaned = 0.00726889 Jy ! Component: 2150 - total flux cleaned = 0.00723345 Jy ! Component: 2200 - total flux cleaned = 0.00721025 Jy ! Component: 2250 - total flux cleaned = 0.00721022 Jy ! Component: 2300 - total flux cleaned = 0.00722141 Jy ! Component: 2350 - total flux cleaned = 0.00718784 Jy ! Component: 2400 - total flux cleaned = 0.00716588 Jy ! Component: 2450 - total flux cleaned = 0.00715494 Jy ! Component: 2500 - total flux cleaned = 0.00714403 Jy ! Component: 2550 - total flux cleaned = 0.00713341 Jy ! Component: 2600 - total flux cleaned = 0.00712284 Jy ! Component: 2650 - total flux cleaned = 0.00713332 Jy ! Component: 2700 - total flux cleaned = 0.00711255 Jy ! Component: 2750 - total flux cleaned = 0.0071126 Jy ! Component: 2800 - total flux cleaned = 0.00711257 Jy ! Component: 2850 - total flux cleaned = 0.00709234 Jy ! Component: 2900 - total flux cleaned = 0.00710224 Jy ! Component: 2950 - total flux cleaned = 0.00708223 Jy ! Component: 3000 - total flux cleaned = 0.00707224 Jy ! Component: 3050 - total flux cleaned = 0.00708204 Jy ! Component: 3100 - total flux cleaned = 0.0070721 Jy ! Component: 3150 - total flux cleaned = 0.00709172 Jy ! Component: 3200 - total flux cleaned = 0.00709174 Jy ! Component: 3250 - total flux cleaned = 0.0070917 Jy ! Component: 3300 - total flux cleaned = 0.00709173 Jy ! Component: 3350 - total flux cleaned = 0.00711096 Jy ! Component: 3400 - total flux cleaned = 0.00709166 Jy ! Component: 3450 - total flux cleaned = 0.00708207 Jy ! Component: 3500 - total flux cleaned = 0.00705321 Jy ! Component: 3550 - total flux cleaned = 0.00703399 Jy ! Component: 3600 - total flux cleaned = 0.00701483 Jy ! Component: 3650 - total flux cleaned = 0.00699563 Jy ! Component: 3700 - total flux cleaned = 0.00697637 Jy ! Component: 3750 - total flux cleaned = 0.00695717 Jy ! Component: 3800 - total flux cleaned = 0.00693796 Jy ! Component: 3850 - total flux cleaned = 0.00692836 Jy ! Component: 3900 - total flux cleaned = 0.00688985 Jy ! Component: 3950 - total flux cleaned = 0.00689962 Jy ! Component: 4000 - total flux cleaned = 0.00689973 Jy ! Component: 4050 - total flux cleaned = 0.00685104 Jy ! Total flux subtracted in 4096 components = 0.00683165 Jy ! Clean residual min=-0.000649 max=0.000676 Jy/beam ! Clean residual mean=-0.000002 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.105183 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 357 components and 0.105183 Jy ![Exited script file: muppet] wmap "J1855+0251_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.228 x 17.61 at -20.83 degrees (North through East) ! Clean map min=-0.0017248 max=0.056222 Jy/beam ! Writing clean map to FITS file: J1855+0251_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0562217 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178275 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.951279 0.951279 1.90256 3.80512 7.61023 15.2205 30.4409 60.8819 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.228 x 17.61 at -20.83 degrees (North through East) ! Clean map min=-0.0017248 max=0.056222 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1855+0251_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:05:29 2019