! Started logfile: J1854-1611_S_2017_10_09_pus_uvs.log on Sun May 12 13:18:19 2019 obs J1854-1611_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1854-1611_S_2017_10_09_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.734435 visibilities/baseline/integration-bin. ! Found source: J1854-1611 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1854-1611_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 244 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 658 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.901460Jy sigma=0.007078 ! Fit after self-cal, rms=0.888400Jy sigma=0.006980 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=12.46 mas, bpa=-18.25 degrees ! Estimated noise=1240.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0764963 Jy ! Component: 100 - total flux cleaned = 0.10588 Jy ! Total flux subtracted in 100 components = 0.10588 Jy ! Clean residual min=-0.008018 max=0.015172 Jy/beam ! Clean residual mean=-0.000028 rms=0.002757 Jy/beam ! Combined flux in latest and established models = 0.10588 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.10588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103949Jy sigma=0.000761 ! Fit after self-cal, rms=0.103847Jy sigma=0.000761 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=15.19 mas, bpa=-17.5 degrees ! Estimated noise=966.225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0285406 Jy ! Component: 100 - total flux cleaned = 0.043751 Jy ! Component: 150 - total flux cleaned = 0.0528603 Jy ! Component: 200 - total flux cleaned = 0.0589554 Jy ! Total flux subtracted in 200 components = 0.0589554 Jy ! Clean residual min=-0.007461 max=0.008486 Jy/beam ! Clean residual mean=-0.000002 rms=0.002125 Jy/beam ! Combined flux in latest and established models = 0.164835 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 97 components and 0.164835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095495Jy sigma=0.000696 ! Fit after self-cal, rms=0.095370Jy sigma=0.000695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.90 HN 1.02 KP 1.14 ! LA 0.92 MK 1.07 NL 0.98 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.16 KP 1.08 ! LA 0.90 MK 1.10 NL 1.11 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.99 HN 1.05 KP 0.93 ! LA 0.71 MK 1.04 NL 1.25 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.22 HN 0.91 KP 1.00* ! LA 1.00* MK 0.91 NL 1.00* OV 1.00* ! PT 0.83 ! ! ! Fit before self-cal, rms=0.095370Jy sigma=0.000695 ! Fit after self-cal, rms=0.095513Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=15.67 mas, bpa=-17.46 degrees ! Estimated noise=985.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000926995 Jy ! Component: 100 - total flux cleaned = -0.00096212 Jy ! Component: 150 - total flux cleaned = -0.000993336 Jy ! Component: 200 - total flux cleaned = -0.00102005 Jy ! Total flux subtracted in 200 components = -0.00102005 Jy ! Clean residual min=-0.004749 max=0.006154 Jy/beam ! Clean residual mean=0.000018 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.163815 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 107 components and 0.163815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095481Jy sigma=0.000679 ! Fit after self-cal, rms=0.095668Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095668Jy sigma=0.000679 ! Fit after self-cal, rms=0.099623Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=16.04 mas, bpa=-17.75 degrees ! Estimated noise=992.253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223197 Jy ! Component: 100 - total flux cleaned = -0.000319147 Jy ! Component: 150 - total flux cleaned = -0.000361572 Jy ! Component: 200 - total flux cleaned = -0.000399816 Jy ! Total flux subtracted in 200 components = -0.000399816 Jy ! Clean residual min=-0.004332 max=0.005736 Jy/beam ! Clean residual mean=0.000006 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.163415 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 115 components and 0.163415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099577Jy sigma=0.000675 ! Fit after self-cal, rms=0.099696Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (89, -80). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555098 Jy ! Component: 100 - total flux cleaned = 0.00875739 Jy ! Component: 150 - total flux cleaned = 0.0109995 Jy ! Component: 200 - total flux cleaned = 0.0127865 Jy ! Total flux subtracted in 200 components = 0.0127865 Jy ! Clean residual min=-0.003885 max=0.003579 Jy/beam ! Clean residual mean=0.000005 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.176202 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 160 components and 0.176202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099347Jy sigma=0.000671 ! Fit after self-cal, rms=0.099256Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099256Jy sigma=0.000671 ! Fit after self-cal, rms=0.099854Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=16.15 mas, bpa=-17.72 degrees ! Estimated noise=987.892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266076 Jy ! Component: 100 - total flux cleaned = 0.00437739 Jy ! Component: 150 - total flux cleaned = 0.0056819 Jy ! Component: 200 - total flux cleaned = 0.00629467 Jy ! Total flux subtracted in 200 components = 0.00629467 Jy ! Clean residual min=-0.003220 max=0.003162 Jy/beam ! Clean residual mean=0.000009 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.182496 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 182 components and 0.182496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099750Jy sigma=0.000670 ! Fit after self-cal, rms=0.099730Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000913365 Jy ! Component: 100 - total flux cleaned = 0.00130211 Jy ! Component: 150 - total flux cleaned = 0.0015146 Jy ! Component: 200 - total flux cleaned = 0.00164873 Jy ! Total flux subtracted in 200 components = 0.00164873 Jy ! Clean residual min=-0.003182 max=0.002992 Jy/beam ! Clean residual mean=0.000009 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.184145 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 197 components and 0.184145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099694Jy sigma=0.000670 ! Fit after self-cal, rms=0.099681Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099681Jy sigma=0.000670 ! Fit after self-cal, rms=0.099931Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.253 mas, bmaj=20.82 mas, bpa=-10.61 degrees ! Estimated noise=1181.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017793 Jy ! Component: 100 - total flux cleaned = 0.00214417 Jy ! Component: 150 - total flux cleaned = 0.00231052 Jy ! Component: 200 - total flux cleaned = 0.00239839 Jy ! Total flux subtracted in 200 components = 0.00239839 Jy ! Clean residual min=-0.003239 max=0.004171 Jy/beam ! Clean residual mean=0.000015 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.186543 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 222 components and 0.186543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099917Jy sigma=0.000669 ! Fit after self-cal, rms=0.099903Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265347 Jy ! Component: 100 - total flux cleaned = 0.000292202 Jy ! Component: 150 - total flux cleaned = 0.00026609 Jy ! Component: 200 - total flux cleaned = 0.000242456 Jy ! Total flux subtracted in 200 components = 0.000242456 Jy ! Clean residual min=-0.003242 max=0.004179 Jy/beam ! Clean residual mean=0.000015 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.186786 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 242 components and 0.186786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099897Jy sigma=0.000669 ! Fit after self-cal, rms=0.099888Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=16.19 mas, bpa=-17.7 degrees ! Estimated noise=987.104 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.22 x 16.19 at -17.7 degrees (North through East) ! Clean map min=-0.0028141 max=0.11076 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=13.34 mas, bpa=-18.5 degrees ! Estimated noise=1321.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0794529 Jy ! Component: 100 - total flux cleaned = 0.109628 Jy ! Component: 150 - total flux cleaned = 0.126461 Jy ! Component: 200 - total flux cleaned = 0.137013 Jy ! Total flux subtracted in 200 components = 0.137013 Jy ! Clean residual min=-0.005106 max=0.006190 Jy/beam ! Clean residual mean=-0.000009 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.137013 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.137013 Jy ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=16.19 mas, bpa=-17.7 degrees ! Estimated noise=987.104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105101 Jy ! Component: 100 - total flux cleaned = 0.0174593 Jy ! Component: 150 - total flux cleaned = 0.0227719 Jy ! Component: 200 - total flux cleaned = 0.0271227 Jy ! Total flux subtracted in 200 components = 0.0271227 Jy ! Clean residual min=-0.004543 max=0.003780 Jy/beam ! Clean residual mean=-0.000004 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.164135 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 106 components and 0.164135 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.253 mas, bmaj=20.82 mas, bpa=-10.61 degrees ! Estimated noise=1181.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550855 Jy ! Component: 100 - total flux cleaned = 0.00960519 Jy ! Component: 150 - total flux cleaned = 0.0128505 Jy ! Component: 200 - total flux cleaned = 0.0154538 Jy ! Total flux subtracted in 200 components = 0.0154538 Jy ! Clean residual min=-0.003885 max=0.004146 Jy/beam ! Clean residual mean=0.000006 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.179589 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209825 Jy ! Component: 100 - total flux cleaned = 0.00360782 Jy ! Component: 150 - total flux cleaned = 0.00457478 Jy ! Component: 200 - total flux cleaned = 0.00534614 Jy ! Total flux subtracted in 200 components = 0.00534614 Jy ! Clean residual min=-0.003498 max=0.004314 Jy/beam ! Clean residual mean=0.000010 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.184935 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 175 components and 0.184935 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=16.19 mas, bpa=-17.7 degrees ! Estimated noise=987.104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549803 Jy ! Component: 100 - total flux cleaned = 0.000831675 Jy ! Component: 150 - total flux cleaned = 0.000884473 Jy ! Component: 200 - total flux cleaned = 0.000977914 Jy ! Total flux subtracted in 200 components = 0.000977914 Jy ! Clean residual min=-0.002996 max=0.003069 Jy/beam ! Clean residual mean=0.000009 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.185913 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 193 components and 0.185913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099882Jy sigma=0.000669 ! Fit after self-cal, rms=0.099817Jy sigma=0.000669 wmodel J1854-1611_S_2017_10_09_pus_map.mod ! Writing 193 model components to file: J1854-1611_S_2017_10_09_pus_map.mod wobs J1854-1611_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1854-1611_S_2017_10_09_pus_uvs.fits wwins J1854-1611_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1854-1611_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 7.63925e-05 Jy ! Component: 100 - total flux cleaned = 0.000216369 Jy ! Component: 150 - total flux cleaned = 0.000390533 Jy ! Component: 200 - total flux cleaned = 0.000514254 Jy ! Component: 250 - total flux cleaned = 0.00067267 Jy ! Component: 300 - total flux cleaned = 0.00078703 Jy ! Component: 350 - total flux cleaned = 0.000968456 Jy ! Component: 400 - total flux cleaned = 0.00103764 Jy ! Component: 450 - total flux cleaned = 0.00113883 Jy ! Component: 500 - total flux cleaned = 0.00126858 Jy ! Component: 550 - total flux cleaned = 0.00126834 Jy ! Component: 600 - total flux cleaned = 0.00129989 Jy ! Component: 650 - total flux cleaned = 0.00138817 Jy ! Component: 700 - total flux cleaned = 0.00135939 Jy ! Component: 750 - total flux cleaned = 0.00147091 Jy ! Component: 800 - total flux cleaned = 0.00152507 Jy ! Component: 850 - total flux cleaned = 0.00160492 Jy ! Component: 900 - total flux cleaned = 0.00176035 Jy ! Component: 950 - total flux cleaned = 0.00186265 Jy ! Component: 1000 - total flux cleaned = 0.00203706 Jy ! Component: 1050 - total flux cleaned = 0.00208599 Jy ! Component: 1100 - total flux cleaned = 0.00213433 Jy ! Component: 1150 - total flux cleaned = 0.00220475 Jy ! Component: 1200 - total flux cleaned = 0.00222788 Jy ! Component: 1250 - total flux cleaned = 0.00229579 Jy ! Component: 1300 - total flux cleaned = 0.0022956 Jy ! Component: 1350 - total flux cleaned = 0.00229545 Jy ! Component: 1400 - total flux cleaned = 0.0022739 Jy ! Component: 1450 - total flux cleaned = 0.00229492 Jy ! Component: 1500 - total flux cleaned = 0.00227361 Jy ! Component: 1550 - total flux cleaned = 0.00225306 Jy ! Component: 1600 - total flux cleaned = 0.00227355 Jy ! Component: 1650 - total flux cleaned = 0.00225407 Jy ! Component: 1700 - total flux cleaned = 0.0022347 Jy ! Component: 1750 - total flux cleaned = 0.00219603 Jy ! Component: 1800 - total flux cleaned = 0.00221529 Jy ! Component: 1850 - total flux cleaned = 0.00215824 Jy ! Component: 1900 - total flux cleaned = 0.00212092 Jy ! Component: 1950 - total flux cleaned = 0.00210281 Jy ! Component: 2000 - total flux cleaned = 0.0020126 Jy ! Component: 2050 - total flux cleaned = 0.00197699 Jy ! Component: 2100 - total flux cleaned = 0.00195969 Jy ! Component: 2150 - total flux cleaned = 0.00190768 Jy ! Component: 2200 - total flux cleaned = 0.00189042 Jy ! Component: 2250 - total flux cleaned = 0.00182266 Jy ! Component: 2300 - total flux cleaned = 0.0017388 Jy ! Component: 2350 - total flux cleaned = 0.00170604 Jy ! Component: 2400 - total flux cleaned = 0.00167303 Jy ! Component: 2450 - total flux cleaned = 0.00157573 Jy ! Component: 2500 - total flux cleaned = 0.00155977 Jy ! Component: 2550 - total flux cleaned = 0.0015279 Jy ! Component: 2600 - total flux cleaned = 0.00144974 Jy ! Component: 2650 - total flux cleaned = 0.00143426 Jy ! Component: 2700 - total flux cleaned = 0.00151093 Jy ! Component: 2750 - total flux cleaned = 0.00148016 Jy ! Component: 2800 - total flux cleaned = 0.00149544 Jy ! Component: 2850 - total flux cleaned = 0.00157005 Jy ! Component: 2900 - total flux cleaned = 0.00151086 Jy ! Component: 2950 - total flux cleaned = 0.00156948 Jy ! Component: 3000 - total flux cleaned = 0.00155495 Jy ! Component: 3050 - total flux cleaned = 0.00151168 Jy ! Component: 3100 - total flux cleaned = 0.00156919 Jy ! Component: 3150 - total flux cleaned = 0.00158353 Jy ! Component: 3200 - total flux cleaned = 0.00151333 Jy ! Component: 3250 - total flux cleaned = 0.0015835 Jy ! Component: 3300 - total flux cleaned = 0.00159741 Jy ! Component: 3350 - total flux cleaned = 0.00159748 Jy ! Component: 3400 - total flux cleaned = 0.00161106 Jy ! Component: 3450 - total flux cleaned = 0.00154299 Jy ! Component: 3500 - total flux cleaned = 0.00159696 Jy ! Component: 3550 - total flux cleaned = 0.00154334 Jy ! Component: 3600 - total flux cleaned = 0.00156997 Jy ! Component: 3650 - total flux cleaned = 0.00153036 Jy ! Component: 3700 - total flux cleaned = 0.00154353 Jy ! Component: 3750 - total flux cleaned = 0.00154357 Jy ! Component: 3800 - total flux cleaned = 0.0015565 Jy ! Component: 3850 - total flux cleaned = 0.00158227 Jy ! Component: 3900 - total flux cleaned = 0.0015822 Jy ! Component: 3950 - total flux cleaned = 0.00162029 Jy ! Component: 4000 - total flux cleaned = 0.00162018 Jy ! Component: 4050 - total flux cleaned = 0.00167058 Jy ! Total flux subtracted in 4096 components = 0.00164541 Jy ! Clean residual min=-0.000770 max=0.000768 Jy/beam ! Clean residual mean=0.000004 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.187559 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 509 components and 0.187559 Jy ![Exited script file: muppet] wmap "J1854-1611_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.22 x 16.19 at -17.7 degrees (North through East) ! Clean map min=-0.0025459 max=0.11076 Jy/beam ! Writing clean map to FITS file: J1854-1611_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110757 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235121 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.636854 0.636854 1.27371 2.54741 5.09483 10.1897 20.3793 40.7586 81.5173 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.22 x 16.19 at -17.7 degrees (North through East) ! Clean map min=-0.0025459 max=0.11076 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1854-1611_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:24 2019