! Started logfile: J1852-2433_S_2017_10_09_pus_uvs.log on Sun May 12 13:18:14 2019 obs J1852-2433_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1852-2433_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.692732 visibilities/baseline/integration-bin. ! Found source: J1852-2433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 14564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1852-2433_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 241 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 854 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995216Jy sigma=0.007254 ! Fit after self-cal, rms=0.946107Jy sigma=0.006907 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=12.48 mas, bpa=-20.27 degrees ! Estimated noise=1503.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449348 Jy ! Component: 100 - total flux cleaned = 0.0551323 Jy ! Total flux subtracted in 100 components = 0.0551323 Jy ! Clean residual min=-0.005417 max=0.004144 Jy/beam ! Clean residual mean=0.000002 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.0551323 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0551323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092131Jy sigma=0.000629 ! Fit after self-cal, rms=0.091061Jy sigma=0.000621 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=14.54 mas, bpa=-19.94 degrees ! Estimated noise=953.261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478231 Jy ! Component: 100 - total flux cleaned = 0.00725879 Jy ! Component: 150 - total flux cleaned = 0.00779337 Jy ! Component: 200 - total flux cleaned = 0.00784435 Jy ! Total flux subtracted in 200 components = 0.00784435 Jy ! Clean residual min=-0.002649 max=0.003119 Jy/beam ! Clean residual mean=0.000019 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.0629767 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.0629767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090766Jy sigma=0.000619 ! Fit after self-cal, rms=0.090704Jy sigma=0.000619 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.97 KP 1.01 ! LA 1.05 MK 1.08 NL 0.96 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 0.95 HN 1.01 KP 1.02 ! LA 0.95 MK 1.00 NL 1.01 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.98 KP 0.85 ! LA 0.82 MK 1.06 NL 1.02 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 4. ! A total of 288 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 0.94 KP 1.00* ! LA 1.00* MK 0.93 NL 1.00* OV 1.00* ! PT 0.81 ! ! ! Fit before self-cal, rms=0.090704Jy sigma=0.000619 ! Fit after self-cal, rms=0.089352Jy sigma=0.000619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=14.68 mas, bpa=-19.93 degrees ! Estimated noise=972.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.79731e-05 Jy ! Component: 100 - total flux cleaned = 0.000227884 Jy ! Component: 150 - total flux cleaned = 0.000201884 Jy ! Component: 200 - total flux cleaned = 0.000177811 Jy ! Total flux subtracted in 200 components = 0.000177811 Jy ! Clean residual min=-0.002456 max=0.002538 Jy/beam ! Clean residual mean=0.000015 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0631545 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.0631545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089333Jy sigma=0.000619 ! Fit after self-cal, rms=0.089250Jy sigma=0.000618 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089250Jy sigma=0.000618 ! Fit after self-cal, rms=0.088508Jy sigma=0.000618 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=14.75 mas, bpa=-20.07 degrees ! Estimated noise=969.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112249 Jy ! Component: 100 - total flux cleaned = 0.000113567 Jy ! Component: 150 - total flux cleaned = 7.96063e-05 Jy ! Component: 200 - total flux cleaned = 6.34372e-05 Jy ! Total flux subtracted in 200 components = 6.34372e-05 Jy ! Clean residual min=-0.002436 max=0.002224 Jy/beam ! Clean residual mean=0.000016 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0632179 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.0632179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088501Jy sigma=0.000618 ! Fit after self-cal, rms=0.088500Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123699 Jy ! Component: 100 - total flux cleaned = 0.000123697 Jy ! Component: 150 - total flux cleaned = 0.000107985 Jy ! Component: 200 - total flux cleaned = 9.3477e-05 Jy ! Total flux subtracted in 200 components = 9.3477e-05 Jy ! Clean residual min=-0.002478 max=0.002320 Jy/beam ! Clean residual mean=0.000016 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0633114 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.0633114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088494Jy sigma=0.000617 ! Fit after self-cal, rms=0.088490Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088490Jy sigma=0.000617 ! Fit after self-cal, rms=0.088340Jy sigma=0.000617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=14.75 mas, bpa=-20.06 degrees ! Estimated noise=966.108 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.48096e-05 Jy ! Component: 100 - total flux cleaned = -4.2125e-05 Jy ! Component: 150 - total flux cleaned = -4.19399e-05 Jy ! Component: 200 - total flux cleaned = -5.65535e-05 Jy ! Total flux subtracted in 200 components = -5.65535e-05 Jy ! Clean residual min=-0.002437 max=0.002184 Jy/beam ! Clean residual mean=0.000015 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0632548 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.0632548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088334Jy sigma=0.000617 ! Fit after self-cal, rms=0.088337Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.24993e-06 Jy ! Component: 100 - total flux cleaned = 1.1067e-06 Jy ! Component: 150 - total flux cleaned = 8.99126e-07 Jy ! Component: 200 - total flux cleaned = 1.04819e-06 Jy ! Total flux subtracted in 200 components = 1.04819e-06 Jy ! Clean residual min=-0.002451 max=0.002145 Jy/beam ! Clean residual mean=0.000015 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0632559 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.0632559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088332Jy sigma=0.000617 ! Fit after self-cal, rms=0.088329Jy sigma=0.000617 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088329Jy sigma=0.000617 ! Fit after self-cal, rms=0.088115Jy sigma=0.000617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.099 mas, bmaj=22.48 mas, bpa=-8.837 degrees ! Estimated noise=1172.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278473 Jy ! Component: 100 - total flux cleaned = 0.000249785 Jy ! Component: 150 - total flux cleaned = 0.000249747 Jy ! Component: 200 - total flux cleaned = 0.000249347 Jy ! Total flux subtracted in 200 components = 0.000249347 Jy ! Clean residual min=-0.002448 max=0.002772 Jy/beam ! Clean residual mean=0.000027 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0635052 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 66 components and 0.0635052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088115Jy sigma=0.000617 ! Fit after self-cal, rms=0.088128Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122905 Jy ! Component: 100 - total flux cleaned = 7.72662e-05 Jy ! Component: 150 - total flux cleaned = 7.80486e-05 Jy ! Component: 200 - total flux cleaned = 7.81478e-05 Jy ! Total flux subtracted in 200 components = 7.81478e-05 Jy ! Clean residual min=-0.002451 max=0.002758 Jy/beam ! Clean residual mean=0.000026 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0635834 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 71 components and 0.0635834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088129Jy sigma=0.000617 ! Fit after self-cal, rms=0.088132Jy sigma=0.000617 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=14.75 mas, bpa=-20.03 degrees ! Estimated noise=963.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 14.75 at -20.03 degrees (North through East) ! Clean map min=-0.0023521 max=0.056876 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=12.59 mas, bpa=-20.28 degrees ! Estimated noise=1532.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455373 Jy ! Component: 100 - total flux cleaned = 0.055762 Jy ! Component: 150 - total flux cleaned = 0.0597595 Jy ! Component: 200 - total flux cleaned = 0.0617798 Jy ! Total flux subtracted in 200 components = 0.0617798 Jy ! Clean residual min=-0.004023 max=0.003480 Jy/beam ! Clean residual mean=0.000007 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.0617798 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0617798 Jy ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=14.75 mas, bpa=-20.03 degrees ! Estimated noise=963.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000953525 Jy ! Component: 100 - total flux cleaned = 0.00103216 Jy ! Component: 150 - total flux cleaned = 0.00106875 Jy ! Component: 200 - total flux cleaned = 0.00113403 Jy ! Total flux subtracted in 200 components = 0.00113403 Jy ! Clean residual min=-0.002396 max=0.002164 Jy/beam ! Clean residual mean=0.000013 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0629138 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.0629138 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.099 mas, bmaj=22.48 mas, bpa=-8.837 degrees ! Estimated noise=1172.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000674337 Jy ! Component: 100 - total flux cleaned = 0.000736032 Jy ! Component: 150 - total flux cleaned = 0.00075173 Jy ! Component: 200 - total flux cleaned = 0.000752071 Jy ! Total flux subtracted in 200 components = 0.000752071 Jy ! Clean residual min=-0.002433 max=0.002732 Jy/beam ! Clean residual mean=0.000027 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0636659 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.27477e-07 Jy ! Component: 100 - total flux cleaned = 6.37432e-07 Jy ! Component: 150 - total flux cleaned = 2.84205e-07 Jy ! Component: 200 - total flux cleaned = -1.10107e-05 Jy ! Total flux subtracted in 200 components = -1.10107e-05 Jy ! Clean residual min=-0.002434 max=0.002745 Jy/beam ! Clean residual mean=0.000026 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0636549 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 54 components and 0.0636549 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=14.75 mas, bpa=-20.03 degrees ! Estimated noise=963.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326114 Jy ! Component: 100 - total flux cleaned = -0.000411051 Jy ! Component: 150 - total flux cleaned = -0.000411185 Jy ! Component: 200 - total flux cleaned = -0.000434288 Jy ! Total flux subtracted in 200 components = -0.000434288 Jy ! Clean residual min=-0.002439 max=0.002139 Jy/beam ! Clean residual mean=0.000014 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0632206 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.0632206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088141Jy sigma=0.000617 ! Fit after self-cal, rms=0.088143Jy sigma=0.000617 wmodel J1852-2433_S_2017_10_09_pus_map.mod ! Writing 60 model components to file: J1852-2433_S_2017_10_09_pus_map.mod wobs J1852-2433_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1852-2433_S_2017_10_09_pus_uvs.fits wwins J1852-2433_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1852-2433_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.12564e-05 Jy ! Component: 100 - total flux cleaned = 0.00015995 Jy ! Component: 150 - total flux cleaned = 0.000328469 Jy ! Component: 200 - total flux cleaned = 0.00048669 Jy ! Component: 250 - total flux cleaned = 0.000608377 Jy ! Component: 300 - total flux cleaned = 0.000609096 Jy ! Component: 350 - total flux cleaned = 0.000638028 Jy ! Component: 400 - total flux cleaned = 0.000772355 Jy ! Component: 450 - total flux cleaned = 0.000850303 Jy ! Component: 500 - total flux cleaned = 0.000951154 Jy ! Component: 550 - total flux cleaned = 0.00104829 Jy ! Component: 600 - total flux cleaned = 0.00107171 Jy ! Component: 650 - total flux cleaned = 0.00109467 Jy ! Component: 700 - total flux cleaned = 0.00107274 Jy ! Component: 750 - total flux cleaned = 0.00115958 Jy ! Component: 800 - total flux cleaned = 0.00111741 Jy ! Component: 850 - total flux cleaned = 0.00111747 Jy ! Component: 900 - total flux cleaned = 0.0010976 Jy ! Component: 950 - total flux cleaned = 0.00105829 Jy ! Component: 1000 - total flux cleaned = 0.00100134 Jy ! Component: 1050 - total flux cleaned = 0.00100154 Jy ! Component: 1100 - total flux cleaned = 0.000945809 Jy ! Component: 1150 - total flux cleaned = 0.00092729 Jy ! Component: 1200 - total flux cleaned = 0.00083829 Jy ! Component: 1250 - total flux cleaned = 0.000820718 Jy ! Component: 1300 - total flux cleaned = 0.000751739 Jy ! Component: 1350 - total flux cleaned = 0.00066723 Jy ! Component: 1400 - total flux cleaned = 0.000634453 Jy ! Component: 1450 - total flux cleaned = 0.00061796 Jy ! Component: 1500 - total flux cleaned = 0.000569518 Jy ! Component: 1550 - total flux cleaned = 0.000569278 Jy ! Component: 1600 - total flux cleaned = 0.000584819 Jy ! Component: 1650 - total flux cleaned = 0.000584768 Jy ! Component: 1700 - total flux cleaned = 0.000630751 Jy ! Component: 1750 - total flux cleaned = 0.000660926 Jy ! Component: 1800 - total flux cleaned = 0.000735446 Jy ! Component: 1850 - total flux cleaned = 0.000765006 Jy ! Component: 1900 - total flux cleaned = 0.000837951 Jy ! Component: 1950 - total flux cleaned = 0.000881184 Jy ! Component: 2000 - total flux cleaned = 0.000909726 Jy ! Component: 2050 - total flux cleaned = 0.000923961 Jy ! Component: 2100 - total flux cleaned = 0.00102152 Jy ! Component: 2150 - total flux cleaned = 0.00107669 Jy ! Component: 2200 - total flux cleaned = 0.0011176 Jy ! Component: 2250 - total flux cleaned = 0.00117139 Jy ! Component: 2300 - total flux cleaned = 0.00118485 Jy ! Component: 2350 - total flux cleaned = 0.00123769 Jy ! Component: 2400 - total flux cleaned = 0.00130279 Jy ! Component: 2450 - total flux cleaned = 0.00132859 Jy ! Component: 2500 - total flux cleaned = 0.00137957 Jy ! Component: 2550 - total flux cleaned = 0.00140501 Jy ! Component: 2600 - total flux cleaned = 0.00148019 Jy ! Component: 2650 - total flux cleaned = 0.0015422 Jy ! Component: 2700 - total flux cleaned = 0.00157909 Jy ! Component: 2750 - total flux cleaned = 0.00161563 Jy ! Component: 2800 - total flux cleaned = 0.00162773 Jy ! Component: 2850 - total flux cleaned = 0.00165172 Jy ! Component: 2900 - total flux cleaned = 0.00167549 Jy ! Component: 2950 - total flux cleaned = 0.00168739 Jy ! Component: 3000 - total flux cleaned = 0.00173418 Jy ! Component: 3050 - total flux cleaned = 0.00174576 Jy ! Component: 3100 - total flux cleaned = 0.00175725 Jy ! Component: 3150 - total flux cleaned = 0.0017572 Jy ! Component: 3200 - total flux cleaned = 0.00176848 Jy ! Component: 3250 - total flux cleaned = 0.00182453 Jy ! Component: 3300 - total flux cleaned = 0.00183566 Jy ! Component: 3350 - total flux cleaned = 0.00183565 Jy ! Component: 3400 - total flux cleaned = 0.00189035 Jy ! Component: 3450 - total flux cleaned = 0.0018902 Jy ! Component: 3500 - total flux cleaned = 0.00192259 Jy ! Component: 3550 - total flux cleaned = 0.00195463 Jy ! Component: 3600 - total flux cleaned = 0.00193332 Jy ! Component: 3650 - total flux cleaned = 0.00194394 Jy ! Component: 3700 - total flux cleaned = 0.00198588 Jy ! Component: 3750 - total flux cleaned = 0.00198581 Jy ! Component: 3800 - total flux cleaned = 0.00198577 Jy ! Component: 3850 - total flux cleaned = 0.00199598 Jy ! Component: 3900 - total flux cleaned = 0.00199594 Jy ! Component: 3950 - total flux cleaned = 0.00201621 Jy ! Component: 4000 - total flux cleaned = 0.00203643 Jy ! Component: 4050 - total flux cleaned = 0.00206655 Jy ! Total flux subtracted in 4096 components = 0.00208659 Jy ! Clean residual min=-0.000799 max=0.000574 Jy/beam ! Clean residual mean=0.000003 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.0653072 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 309 components and 0.0653072 Jy ![Exited script file: muppet] wmap "J1852-2433_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 14.75 at -20.03 degrees (North through East) ! Clean map min=-0.0013079 max=0.056945 Jy/beam ! Writing clean map to FITS file: J1852-2433_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0569446 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174718 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.920462 0.920462 1.84092 3.68185 7.36369 14.7274 29.4548 58.9095 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 14.75 at -20.03 degrees (North through East) ! Clean map min=-0.0013079 max=0.056945 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1852-2433_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:19 2019