! Started logfile: J1852-2433_S_2017_07_16_pus_uvs.log on Thu May 9 11:16:15 2019 obs J1852-2433_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1852-2433_S_2017_07_16_pus_uva.fits ! AN table 1: 61 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.390528 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1852-2433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 4288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1852-2433_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 291 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 291 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 610 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003919Jy sigma=0.007266 ! Fit after self-cal, rms=0.946833Jy sigma=0.006847 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.388 mas, bmaj=7.516 mas, bpa=2.892 degrees ! Estimated noise=2311.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450548 Jy ! Component: 100 - total flux cleaned = 0.054978 Jy ! Total flux subtracted in 100 components = 0.054978 Jy ! Clean residual min=-0.005160 max=0.005617 Jy/beam ! Clean residual mean=-0.000014 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.054978 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.054978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094009Jy sigma=0.000629 ! Fit after self-cal, rms=0.092600Jy sigma=0.000617 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=8.282 mas, bpa=2.554 degrees ! Estimated noise=1867.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395894 Jy ! Component: 100 - total flux cleaned = 0.00459437 Jy ! Component: 150 - total flux cleaned = 0.00453834 Jy ! Component: 200 - total flux cleaned = 0.00442978 Jy ! Total flux subtracted in 200 components = 0.00442978 Jy ! Clean residual min=-0.004299 max=0.004090 Jy/beam ! Clean residual mean=-0.000016 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.0594078 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.0594078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092370Jy sigma=0.000616 ! Fit after self-cal, rms=0.092318Jy sigma=0.000616 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.80 KP 1.10 ! LA 1.05 MK 1.13 NL 0.93 OV 1.11 ! PT 0.95 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.78 KP 0.91 ! LA 0.92 MK 1.04 NL 1.15 OV 1.09 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.89 KP 0.97 ! LA 0.99 MK 1.05 NL 0.98 OV 0.92 ! PT 1.14 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.092318Jy sigma=0.000616 ! Fit after self-cal, rms=0.088198Jy sigma=0.000614 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=8.376 mas, bpa=2.824 degrees ! Estimated noise=1845.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00021945 Jy ! Component: 100 - total flux cleaned = -0.000247417 Jy ! Component: 150 - total flux cleaned = -0.000247888 Jy ! Component: 200 - total flux cleaned = -0.0002473 Jy ! Total flux subtracted in 200 components = -0.0002473 Jy ! Clean residual min=-0.004186 max=0.004153 Jy/beam ! Clean residual mean=-0.000018 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.0591605 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0591605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088184Jy sigma=0.000613 ! Fit after self-cal, rms=0.088086Jy sigma=0.000612 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088086Jy sigma=0.000612 ! Fit after self-cal, rms=0.088872Jy sigma=0.000611 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=8.414 mas, bpa=2.689 degrees ! Estimated noise=1845.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180566 Jy ! Component: 100 - total flux cleaned = 0.000303721 Jy ! Component: 150 - total flux cleaned = 0.000344894 Jy ! Component: 200 - total flux cleaned = 0.000344753 Jy ! Total flux subtracted in 200 components = 0.000344753 Jy ! Clean residual min=-0.003689 max=0.003724 Jy/beam ! Clean residual mean=-0.000020 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.0595052 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.0595052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088860Jy sigma=0.000611 ! Fit after self-cal, rms=0.088935Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.86721e-05 Jy ! Component: 100 - total flux cleaned = -9.23738e-05 Jy ! Component: 150 - total flux cleaned = -0.000131876 Jy ! Component: 200 - total flux cleaned = -0.000149507 Jy ! Total flux subtracted in 200 components = -0.000149507 Jy ! Clean residual min=-0.003882 max=0.003578 Jy/beam ! Clean residual mean=-0.000018 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.0593557 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.0593557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088924Jy sigma=0.000611 ! Fit after self-cal, rms=0.088920Jy sigma=0.000611 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088920Jy sigma=0.000611 ! Fit after self-cal, rms=0.089710Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.427 mas, bpa=2.641 degrees ! Estimated noise=1845.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.42036e-06 Jy ! Component: 100 - total flux cleaned = 4.71442e-05 Jy ! Component: 150 - total flux cleaned = 6.36036e-05 Jy ! Component: 200 - total flux cleaned = 6.38583e-05 Jy ! Total flux subtracted in 200 components = 6.38583e-05 Jy ! Clean residual min=-0.003682 max=0.003602 Jy/beam ! Clean residual mean=-0.000020 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.0594196 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.0594196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089703Jy sigma=0.000610 ! Fit after self-cal, rms=0.089705Jy sigma=0.000610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.32785e-05 Jy ! Component: 100 - total flux cleaned = 2.46963e-05 Jy ! Component: 150 - total flux cleaned = 4.01345e-05 Jy ! Component: 200 - total flux cleaned = 3.96674e-05 Jy ! Total flux subtracted in 200 components = 3.96674e-05 Jy ! Clean residual min=-0.003821 max=0.003568 Jy/beam ! Clean residual mean=-0.000018 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0594592 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.0594592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089697Jy sigma=0.000610 ! Fit after self-cal, rms=0.089694Jy sigma=0.000610 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089694Jy sigma=0.000610 ! Fit after self-cal, rms=0.089777Jy sigma=0.000610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.635 mas, bmaj=16.85 mas, bpa=1.253 degrees ! Estimated noise=2501.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.47555e-05 Jy ! Component: 100 - total flux cleaned = 4.08378e-05 Jy ! Component: 150 - total flux cleaned = 5.55831e-05 Jy ! Component: 200 - total flux cleaned = 8.24682e-05 Jy ! Total flux subtracted in 200 components = 8.24682e-05 Jy ! Clean residual min=-0.003605 max=0.004625 Jy/beam ! Clean residual mean=-0.000047 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.0595417 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 46 components and 0.0595417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089776Jy sigma=0.000610 ! Fit after self-cal, rms=0.089781Jy sigma=0.000610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.86188e-05 Jy ! Component: 100 - total flux cleaned = -4.80012e-05 Jy ! Component: 150 - total flux cleaned = -1.85986e-05 Jy ! Component: 200 - total flux cleaned = -6.23125e-06 Jy ! Total flux subtracted in 200 components = -6.23125e-06 Jy ! Clean residual min=-0.003586 max=0.004594 Jy/beam ! Clean residual mean=-0.000046 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.0595355 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.0595355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089782Jy sigma=0.000610 ! Fit after self-cal, rms=0.089770Jy sigma=0.000610 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=8.434 mas, bpa=2.581 degrees ! Estimated noise=1846.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.841 x 8.434 at 2.581 degrees (North through East) ! Clean map min=-0.0036012 max=0.059354 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=7.643 mas, bpa=2.933 degrees ! Estimated noise=2259.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.045409 Jy ! Component: 100 - total flux cleaned = 0.0557131 Jy ! Component: 150 - total flux cleaned = 0.0588018 Jy ! Component: 200 - total flux cleaned = 0.0598341 Jy ! Total flux subtracted in 200 components = 0.0598341 Jy ! Clean residual min=-0.005481 max=0.004724 Jy/beam ! Clean residual mean=-0.000008 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.0598341 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0598341 Jy ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=8.434 mas, bpa=2.581 degrees ! Estimated noise=1846.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011928 Jy ! Component: 100 - total flux cleaned = 0.000178285 Jy ! Component: 150 - total flux cleaned = 0.000370188 Jy ! Component: 200 - total flux cleaned = 0.000289577 Jy ! Total flux subtracted in 200 components = 0.000289577 Jy ! Clean residual min=-0.003772 max=0.003736 Jy/beam ! Clean residual mean=-0.000017 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.0601237 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.0601237 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.635 mas, bmaj=16.85 mas, bpa=1.253 degrees ! Estimated noise=2501.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00025196 Jy ! Component: 100 - total flux cleaned = -0.000255036 Jy ! Component: 150 - total flux cleaned = -0.000256798 Jy ! Component: 200 - total flux cleaned = -0.000258892 Jy ! Total flux subtracted in 200 components = -0.000258892 Jy ! Clean residual min=-0.003790 max=0.004604 Jy/beam ! Clean residual mean=-0.000043 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.0598648 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.61332e-07 Jy ! Component: 100 - total flux cleaned = -1.84797e-05 Jy ! Component: 150 - total flux cleaned = -3.38644e-05 Jy ! Component: 200 - total flux cleaned = -6.35717e-05 Jy ! Total flux subtracted in 200 components = -6.35717e-05 Jy ! Clean residual min=-0.003713 max=0.004592 Jy/beam ! Clean residual mean=-0.000044 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.0598012 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.0598012 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=8.434 mas, bpa=2.581 degrees ! Estimated noise=1846.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235531 Jy ! Component: 100 - total flux cleaned = 0.000203118 Jy ! Component: 150 - total flux cleaned = 0.000111911 Jy ! Component: 200 - total flux cleaned = 3.1925e-05 Jy ! Total flux subtracted in 200 components = 3.1925e-05 Jy ! Clean residual min=-0.003831 max=0.003721 Jy/beam ! Clean residual mean=-0.000018 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.0598331 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0598331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089775Jy sigma=0.000610 ! Fit after self-cal, rms=0.089755Jy sigma=0.000610 wmodel J1852-2433_S_2017_07_16_pus_map.mod ! Writing 32 model components to file: J1852-2433_S_2017_07_16_pus_map.mod wobs J1852-2433_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1852-2433_S_2017_07_16_pus_uvs.fits wwins J1852-2433_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1852-2433_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00080199 Jy ! Component: 100 - total flux cleaned = -0.00135477 Jy ! Component: 150 - total flux cleaned = -0.00175117 Jy ! Component: 200 - total flux cleaned = -0.00201901 Jy ! Component: 250 - total flux cleaned = -0.00227445 Jy ! Component: 300 - total flux cleaned = -0.00261617 Jy ! Component: 350 - total flux cleaned = -0.0028049 Jy ! Component: 400 - total flux cleaned = -0.00316803 Jy ! Component: 450 - total flux cleaned = -0.0034298 Jy ! Component: 500 - total flux cleaned = -0.00368215 Jy ! Component: 550 - total flux cleaned = -0.00388533 Jy ! Component: 600 - total flux cleaned = -0.00404392 Jy ! Component: 650 - total flux cleaned = -0.00412388 Jy ! Component: 700 - total flux cleaned = -0.00434916 Jy ! Component: 750 - total flux cleaned = -0.00456793 Jy ! Component: 800 - total flux cleaned = -0.00470892 Jy ! Component: 850 - total flux cleaned = -0.00494975 Jy ! Component: 900 - total flux cleaned = -0.00501717 Jy ! Component: 950 - total flux cleaned = -0.00514882 Jy ! Component: 1000 - total flux cleaned = -0.00534038 Jy ! Component: 1050 - total flux cleaned = -0.00543372 Jy ! Component: 1100 - total flux cleaned = -0.0055555 Jy ! Component: 1150 - total flux cleaned = -0.00561493 Jy ! Component: 1200 - total flux cleaned = -0.00564444 Jy ! Component: 1250 - total flux cleaned = -0.00581709 Jy ! Component: 1300 - total flux cleaned = -0.00581708 Jy ! Component: 1350 - total flux cleaned = -0.00595528 Jy ! Component: 1400 - total flux cleaned = -0.00600991 Jy ! Component: 1450 - total flux cleaned = -0.00614243 Jy ! Component: 1500 - total flux cleaned = -0.0061424 Jy ! Component: 1550 - total flux cleaned = -0.00606661 Jy ! Component: 1600 - total flux cleaned = -0.00601659 Jy ! Component: 1650 - total flux cleaned = -0.00596742 Jy ! Component: 1700 - total flux cleaned = -0.00579843 Jy ! Component: 1750 - total flux cleaned = -0.00568022 Jy ! Component: 1800 - total flux cleaned = -0.00565694 Jy ! Component: 1850 - total flux cleaned = -0.0055647 Jy ! Component: 1900 - total flux cleaned = -0.00549636 Jy ! Component: 1950 - total flux cleaned = -0.00547379 Jy ! Component: 2000 - total flux cleaned = -0.00545198 Jy ! Component: 2050 - total flux cleaned = -0.00538707 Jy ! Component: 2100 - total flux cleaned = -0.005387 Jy ! Component: 2150 - total flux cleaned = -0.00536596 Jy ! Component: 2200 - total flux cleaned = -0.00530368 Jy ! Component: 2250 - total flux cleaned = -0.00530365 Jy ! Component: 2300 - total flux cleaned = -0.00530367 Jy ! Component: 2350 - total flux cleaned = -0.00532343 Jy ! Component: 2400 - total flux cleaned = -0.005284 Jy ! Component: 2450 - total flux cleaned = -0.00526466 Jy ! Component: 2500 - total flux cleaned = -0.00522603 Jy ! Component: 2550 - total flux cleaned = -0.0052642 Jy ! Component: 2600 - total flux cleaned = -0.00524518 Jy ! Component: 2650 - total flux cleaned = -0.00524522 Jy ! Component: 2700 - total flux cleaned = -0.00528208 Jy ! Component: 2750 - total flux cleaned = -0.00531892 Jy ! Component: 2800 - total flux cleaned = -0.00533707 Jy ! Component: 2850 - total flux cleaned = -0.00535499 Jy ! Component: 2900 - total flux cleaned = -0.00535515 Jy ! Component: 2950 - total flux cleaned = -0.00540838 Jy ! Component: 3000 - total flux cleaned = -0.00546103 Jy ! Component: 3050 - total flux cleaned = -0.00553081 Jy ! Component: 3100 - total flux cleaned = -0.00554814 Jy ! Component: 3150 - total flux cleaned = -0.0055653 Jy ! Component: 3200 - total flux cleaned = -0.00563369 Jy ! Component: 3250 - total flux cleaned = -0.0057015 Jy ! Component: 3300 - total flux cleaned = -0.0057688 Jy ! Component: 3350 - total flux cleaned = -0.00588596 Jy ! Component: 3400 - total flux cleaned = -0.00593582 Jy ! Component: 3450 - total flux cleaned = -0.00600202 Jy ! Component: 3500 - total flux cleaned = -0.00603489 Jy ! Component: 3550 - total flux cleaned = -0.00611659 Jy ! Component: 3600 - total flux cleaned = -0.00618154 Jy ! Component: 3650 - total flux cleaned = -0.00624611 Jy ! Component: 3700 - total flux cleaned = -0.00631044 Jy ! Component: 3750 - total flux cleaned = -0.00635839 Jy ! Component: 3800 - total flux cleaned = -0.00642202 Jy ! Component: 3850 - total flux cleaned = -0.00646949 Jy ! Component: 3900 - total flux cleaned = -0.00654818 Jy ! Component: 3950 - total flux cleaned = -0.00661069 Jy ! Component: 4000 - total flux cleaned = -0.00662625 Jy ! Component: 4050 - total flux cleaned = -0.00664185 Jy ! Total flux subtracted in 4096 components = -0.00670363 Jy ! Clean residual min=-0.000924 max=0.000914 Jy/beam ! Clean residual mean=-0.000004 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.0531295 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 314 components and 0.0531295 Jy ![Exited script file: muppet] wmap "J1852-2433_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.841 x 8.434 at 2.581 degrees (North through East) ! Clean map min=-0.0019066 max=0.059584 Jy/beam ! Writing clean map to FITS file: J1852-2433_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0595841 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000264698 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.33273 1.33273 2.66545 5.33091 10.6618 21.3236 42.6473 85.2945 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.841 x 8.434 at 2.581 degrees (North through East) ! Clean map min=-0.0019066 max=0.059584 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1852-2433_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:16:19 2019