! Started logfile: J1850-2555_S_2017_07_16_pus_uvs.log on Thu May 9 11:16:09 2019 obs J1850-2555_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1850-2555_S_2017_07_16_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.206377 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1850-2555 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 4272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1850-2555_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 718 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 728 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 688 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011589Jy sigma=0.007469 ! Fit after self-cal, rms=0.940302Jy sigma=0.006951 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=28.87 mas, bpa=-17.16 degrees ! Estimated noise=3027.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481658 Jy ! Component: 100 - total flux cleaned = 0.0571659 Jy ! Total flux subtracted in 100 components = 0.0571659 Jy ! Clean residual min=-0.005515 max=0.007185 Jy/beam ! Clean residual mean=0.000007 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 0.0571659 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0571659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085500Jy sigma=0.000596 ! Fit after self-cal, rms=0.084055Jy sigma=0.000586 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=30.86 mas, bpa=-16.93 degrees ! Estimated noise=1832.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045952 Jy ! Component: 100 - total flux cleaned = 0.00430028 Jy ! Component: 150 - total flux cleaned = 0.00370766 Jy ! Component: 200 - total flux cleaned = 0.00330943 Jy ! Total flux subtracted in 200 components = 0.00330943 Jy ! Clean residual min=-0.004589 max=0.003773 Jy/beam ! Clean residual mean=0.000037 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.0604753 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.0604753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083356Jy sigma=0.000582 ! Fit after self-cal, rms=0.083274Jy sigma=0.000581 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.90 KP 0.90 ! LA 1.07 MK 0.97 NL 0.97 OV 1.02 ! PT 1.25 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.90 ! LA 0.95 MK 1.00 NL 0.96 OV 1.06 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.93 KP 0.92 ! LA 0.95 MK 1.05 NL 1.00 OV 0.95 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.083274Jy sigma=0.000581 ! Fit after self-cal, rms=0.079464Jy sigma=0.000579 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=30.83 mas, bpa=-16.78 degrees ! Estimated noise=1792.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000323004 Jy ! Component: 100 - total flux cleaned = -0.000377288 Jy ! Component: 150 - total flux cleaned = -0.000428001 Jy ! Component: 200 - total flux cleaned = -0.000381207 Jy ! Total flux subtracted in 200 components = -0.000381207 Jy ! Clean residual min=-0.003255 max=0.003807 Jy/beam ! Clean residual mean=-0.000003 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.0600941 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 57 components and 0.0600941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079385Jy sigma=0.000579 ! Fit after self-cal, rms=0.079345Jy sigma=0.000578 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079345Jy sigma=0.000578 ! Fit after self-cal, rms=0.079487Jy sigma=0.000578 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.593 mas, bmaj=30.86 mas, bpa=-16.79 degrees ! Estimated noise=1790.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232587 Jy ! Component: 100 - total flux cleaned = -0.000232106 Jy ! Component: 150 - total flux cleaned = -0.00018985 Jy ! Component: 200 - total flux cleaned = -0.000188279 Jy ! Total flux subtracted in 200 components = -0.000188279 Jy ! Clean residual min=-0.002959 max=0.003347 Jy/beam ! Clean residual mean=0.000000 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.0599058 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.0599058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079442Jy sigma=0.000577 ! Fit after self-cal, rms=0.079478Jy sigma=0.000577 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (59, -90.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119472 Jy ! Component: 100 - total flux cleaned = 0.00113144 Jy ! Component: 150 - total flux cleaned = 0.0011286 Jy ! Component: 200 - total flux cleaned = 0.00135269 Jy ! Total flux subtracted in 200 components = 0.00135269 Jy ! Clean residual min=-0.001939 max=0.002037 Jy/beam ! Clean residual mean=0.000006 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0612585 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 110 components and 0.0612585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079314Jy sigma=0.000576 ! Fit after self-cal, rms=0.079282Jy sigma=0.000576 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079282Jy sigma=0.000576 ! Fit after self-cal, rms=0.079430Jy sigma=0.000576 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=30.8 mas, bpa=-16.8 degrees ! Estimated noise=1783.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00094124 Jy ! Component: 100 - total flux cleaned = 0.00125686 Jy ! Component: 150 - total flux cleaned = 0.00126086 Jy ! Component: 200 - total flux cleaned = 0.0012277 Jy ! Total flux subtracted in 200 components = 0.0012277 Jy ! Clean residual min=-0.001752 max=0.002020 Jy/beam ! Clean residual mean=0.000010 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0624862 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 140 components and 0.0624862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079342Jy sigma=0.000575 ! Fit after self-cal, rms=0.079367Jy sigma=0.000575 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259477 Jy ! Component: 100 - total flux cleaned = 0.000482884 Jy ! Component: 150 - total flux cleaned = 0.000587347 Jy ! Component: 200 - total flux cleaned = 0.000771902 Jy ! Total flux subtracted in 200 components = 0.000771902 Jy ! Clean residual min=-0.001708 max=0.002001 Jy/beam ! Clean residual mean=0.000008 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0632581 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 152 components and 0.0632581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079318Jy sigma=0.000574 ! Fit after self-cal, rms=0.079269Jy sigma=0.000574 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079269Jy sigma=0.000574 ! Fit after self-cal, rms=0.079470Jy sigma=0.000574 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.961 mas, bmaj=39.65 mas, bpa=-10.08 degrees ! Estimated noise=2084.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378749 Jy ! Component: 100 - total flux cleaned = -0.000137005 Jy ! Component: 150 - total flux cleaned = -0.000463301 Jy ! Component: 200 - total flux cleaned = -0.000700635 Jy ! Total flux subtracted in 200 components = -0.000700635 Jy ! Clean residual min=-0.001796 max=0.002276 Jy/beam ! Clean residual mean=0.000015 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0625575 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 201 components and 0.0625575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079442Jy sigma=0.000573 ! Fit after self-cal, rms=0.079472Jy sigma=0.000573 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135494 Jy ! Component: 100 - total flux cleaned = -0.000163457 Jy ! Component: 150 - total flux cleaned = -0.000281609 Jy ! Component: 200 - total flux cleaned = -0.00039182 Jy ! Total flux subtracted in 200 components = -0.00039182 Jy ! Clean residual min=-0.001816 max=0.002318 Jy/beam ! Clean residual mean=0.000014 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0621657 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 229 components and 0.0621657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079457Jy sigma=0.000573 ! Fit after self-cal, rms=0.079448Jy sigma=0.000573 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=30.71 mas, bpa=-16.8 degrees ! Estimated noise=1778.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.618 x 30.71 at -16.8 degrees (North through East) ! Clean map min=-0.0054465 max=0.065014 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=28.72 mas, bpa=-17.02 degrees ! Estimated noise=2939.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0480946 Jy ! Component: 100 - total flux cleaned = 0.0560999 Jy ! Component: 150 - total flux cleaned = 0.0590843 Jy ! Component: 200 - total flux cleaned = 0.0607353 Jy ! Total flux subtracted in 200 components = 0.0607353 Jy ! Clean residual min=-0.005162 max=0.005167 Jy/beam ! Clean residual mean=0.000003 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.0607353 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0607353 Jy ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=30.71 mas, bpa=-16.8 degrees ! Estimated noise=1778.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000331312 Jy ! Component: 100 - total flux cleaned = -0.000348614 Jy ! Component: 150 - total flux cleaned = 0.000114888 Jy ! Component: 200 - total flux cleaned = 0.000121011 Jy ! Total flux subtracted in 200 components = 0.000121011 Jy ! Clean residual min=-0.003389 max=0.002627 Jy/beam ! Clean residual mean=0.000008 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.0608563 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 64 components and 0.0608563 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.961 mas, bmaj=39.65 mas, bpa=-10.08 degrees ! Estimated noise=2084.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000617676 Jy ! Component: 100 - total flux cleaned = -0.000324651 Jy ! Component: 150 - total flux cleaned = -0.000604239 Jy ! Component: 200 - total flux cleaned = -0.000698447 Jy ! Total flux subtracted in 200 components = -0.000698447 Jy ! Clean residual min=-0.002269 max=0.002208 Jy/beam ! Clean residual mean=0.000012 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0601579 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167523 Jy ! Component: 100 - total flux cleaned = -0.000280608 Jy ! Component: 150 - total flux cleaned = -0.000349498 Jy ! Component: 200 - total flux cleaned = -0.000381819 Jy ! Total flux subtracted in 200 components = -0.000381819 Jy ! Clean residual min=-0.001852 max=0.002108 Jy/beam ! Clean residual mean=0.000010 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0597761 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 124 components and 0.0597761 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=30.71 mas, bpa=-16.8 degrees ! Estimated noise=1778.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110069 Jy ! Component: 100 - total flux cleaned = -8.88251e-06 Jy ! Component: 150 - total flux cleaned = 0.000131819 Jy ! Component: 200 - total flux cleaned = 0.000215104 Jy ! Total flux subtracted in 200 components = 0.000215104 Jy ! Clean residual min=-0.001873 max=0.001816 Jy/beam ! Clean residual mean=0.000006 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0599912 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 158 components and 0.0599912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079493Jy sigma=0.000573 ! Fit after self-cal, rms=0.079474Jy sigma=0.000573 wmodel J1850-2555_S_2017_07_16_pus_map.mod ! Writing 158 model components to file: J1850-2555_S_2017_07_16_pus_map.mod wobs J1850-2555_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1850-2555_S_2017_07_16_pus_uvs.fits wwins J1850-2555_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1850-2555_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226691 Jy ! Component: 100 - total flux cleaned = 7.92425e-05 Jy ! Component: 150 - total flux cleaned = -0.0001099 Jy ! Component: 200 - total flux cleaned = -0.000284914 Jy ! Component: 250 - total flux cleaned = -0.000518994 Jy ! Component: 300 - total flux cleaned = -0.000650221 Jy ! Component: 350 - total flux cleaned = -0.000691672 Jy ! Component: 400 - total flux cleaned = -0.000751434 Jy ! Component: 450 - total flux cleaned = -0.000732107 Jy ! Component: 500 - total flux cleaned = -0.000750409 Jy ! Component: 550 - total flux cleaned = -0.000767781 Jy ! Component: 600 - total flux cleaned = -0.000818053 Jy ! Component: 650 - total flux cleaned = -0.000834291 Jy ! Component: 700 - total flux cleaned = -0.00083447 Jy ! Component: 750 - total flux cleaned = -0.000834539 Jy ! Component: 800 - total flux cleaned = -0.000879125 Jy ! Component: 850 - total flux cleaned = -0.000893892 Jy ! Component: 900 - total flux cleaned = -0.000865723 Jy ! Component: 950 - total flux cleaned = -0.000921623 Jy ! Component: 1000 - total flux cleaned = -0.000894014 Jy ! Component: 1050 - total flux cleaned = -0.000961152 Jy ! Component: 1100 - total flux cleaned = -0.000974122 Jy ! Component: 1150 - total flux cleaned = -0.00100018 Jy ! Component: 1200 - total flux cleaned = -0.00103847 Jy ! Component: 1250 - total flux cleaned = -0.0010636 Jy ! Component: 1300 - total flux cleaned = -0.00111337 Jy ! Component: 1350 - total flux cleaned = -0.00111327 Jy ! Component: 1400 - total flux cleaned = -0.00114967 Jy ! Component: 1450 - total flux cleaned = -0.00113767 Jy ! Component: 1500 - total flux cleaned = -0.00118518 Jy ! Component: 1550 - total flux cleaned = -0.00120875 Jy ! Component: 1600 - total flux cleaned = -0.00127851 Jy ! Component: 1650 - total flux cleaned = -0.00131313 Jy ! Component: 1700 - total flux cleaned = -0.00140422 Jy ! Component: 1750 - total flux cleaned = -0.00143797 Jy ! Component: 1800 - total flux cleaned = -0.0014716 Jy ! Component: 1850 - total flux cleaned = -0.00153803 Jy ! Component: 1900 - total flux cleaned = -0.00158185 Jy ! Component: 1950 - total flux cleaned = -0.00160364 Jy ! Component: 2000 - total flux cleaned = -0.00164706 Jy ! Component: 2050 - total flux cleaned = -0.00171149 Jy ! Component: 2100 - total flux cleaned = -0.0017647 Jy ! Component: 2150 - total flux cleaned = -0.00180696 Jy ! Component: 2200 - total flux cleaned = -0.00182793 Jy ! Component: 2250 - total flux cleaned = -0.00186963 Jy ! Component: 2300 - total flux cleaned = -0.00192147 Jy ! Component: 2350 - total flux cleaned = -0.0019522 Jy ! Component: 2400 - total flux cleaned = -0.00198284 Jy ! Component: 2450 - total flux cleaned = -0.00201332 Jy ! Component: 2500 - total flux cleaned = -0.00200323 Jy ! Component: 2550 - total flux cleaned = -0.00203341 Jy ! Component: 2600 - total flux cleaned = -0.0020835 Jy ! Component: 2650 - total flux cleaned = -0.00207351 Jy ! Component: 2700 - total flux cleaned = -0.00212334 Jy ! Component: 2750 - total flux cleaned = -0.00215312 Jy ! Component: 2800 - total flux cleaned = -0.00219262 Jy ! Component: 2850 - total flux cleaned = -0.00221239 Jy ! Component: 2900 - total flux cleaned = -0.00225176 Jy ! Component: 2950 - total flux cleaned = -0.00229092 Jy ! Component: 3000 - total flux cleaned = -0.00231047 Jy ! Component: 3050 - total flux cleaned = -0.00235917 Jy ! Component: 3100 - total flux cleaned = -0.00238831 Jy ! Component: 3150 - total flux cleaned = -0.00242698 Jy ! Component: 3200 - total flux cleaned = -0.00244627 Jy ! Component: 3250 - total flux cleaned = -0.00245592 Jy ! Component: 3300 - total flux cleaned = -0.00249448 Jy ! Component: 3350 - total flux cleaned = -0.00252332 Jy ! Component: 3400 - total flux cleaned = -0.00256174 Jy ! Component: 3450 - total flux cleaned = -0.00260015 Jy ! Component: 3500 - total flux cleaned = -0.00264812 Jy ! Component: 3550 - total flux cleaned = -0.00268651 Jy ! Component: 3600 - total flux cleaned = -0.00272494 Jy ! Component: 3650 - total flux cleaned = -0.00276337 Jy ! Component: 3700 - total flux cleaned = -0.0028018 Jy ! Component: 3750 - total flux cleaned = -0.00283067 Jy ! Component: 3800 - total flux cleaned = -0.00286919 Jy ! Component: 3850 - total flux cleaned = -0.00292715 Jy ! Component: 3900 - total flux cleaned = -0.00294641 Jy ! Component: 3950 - total flux cleaned = -0.0029755 Jy ! Component: 4000 - total flux cleaned = -0.00299509 Jy ! Component: 4050 - total flux cleaned = -0.00300485 Jy ! Total flux subtracted in 4096 components = -0.00303428 Jy ! Clean residual min=-0.000533 max=0.000592 Jy/beam ! Clean residual mean=-0.000008 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.0569569 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 478 components and 0.0569569 Jy ![Exited script file: muppet] wmap "J1850-2555_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.618 x 30.71 at -16.8 degrees (North through East) ! Clean map min=-0.0064722 max=0.062365 Jy/beam ! Writing clean map to FITS file: J1850-2555_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0623654 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203067 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.976827 0.976827 1.95365 3.90731 7.81462 15.6292 31.2585 62.5169 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.618 x 30.71 at -16.8 degrees (North through East) ! Clean map min=-0.0064722 max=0.062365 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1850-2555_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:16:15 2019