! Started logfile: J1849+6705_S_2017_10_09_pus_uvs.log on Sun May 12 13:18:10 2019 obs J1849+6705_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1849+6705_S_2017_10_09_pus_uva.fits ! AN table 1: 9 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.638889 visibilities/baseline/integration-bin. ! Found source: J1849+6705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1849+6705_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.320529Jy sigma=0.002501 ! Fit after self-cal, rms=0.305583Jy sigma=0.002381 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.277 mas, bmaj=8.932 mas, bpa=-89.35 degrees ! Estimated noise=4346.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.545553 Jy ! Component: 100 - total flux cleaned = 0.674528 Jy ! Total flux subtracted in 100 components = 0.674528 Jy ! Clean residual min=-0.034002 max=0.051751 Jy/beam ! Clean residual mean=-0.000024 rms=0.010481 Jy/beam ! Combined flux in latest and established models = 0.674528 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.674528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167674Jy sigma=0.001119 ! Fit after self-cal, rms=0.167643Jy sigma=0.001119 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=9.84 mas, bpa=-88.05 degrees ! Estimated noise=3703.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0713306 Jy ! Component: 100 - total flux cleaned = 0.10275 Jy ! Component: 150 - total flux cleaned = 0.117084 Jy ! Component: 200 - total flux cleaned = 0.12391 Jy ! Total flux subtracted in 200 components = 0.12391 Jy ! Clean residual min=-0.027517 max=0.028092 Jy/beam ! Clean residual mean=-0.000046 rms=0.006955 Jy/beam ! Combined flux in latest and established models = 0.798438 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.798438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132630Jy sigma=0.000904 ! Fit after self-cal, rms=0.132523Jy sigma=0.000903 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.98 KP 1.09 ! LA 1.02 MK 1.00 NL 0.99 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.09 HN 1.02 KP 1.02 ! LA 0.99 MK 1.04 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.09 HN 1.00 KP 0.88 ! LA 0.78 MK 1.02 NL 1.14 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.97 KP 1.00* ! LA 0.82 MK 1.02 NL 1.00* OV 1.00* ! PT 1.02 ! ! ! Fit before self-cal, rms=0.132523Jy sigma=0.000903 ! Fit after self-cal, rms=0.087573Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=9.823 mas, bpa=-88.28 degrees ! Estimated noise=3724.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00367132 Jy ! Component: 100 - total flux cleaned = -0.00507842 Jy ! Component: 150 - total flux cleaned = -0.00525917 Jy ! Component: 200 - total flux cleaned = -0.00533437 Jy ! Total flux subtracted in 200 components = -0.00533437 Jy ! Clean residual min=-0.008631 max=0.010943 Jy/beam ! Clean residual mean=-0.000006 rms=0.002390 Jy/beam ! Combined flux in latest and established models = 0.793104 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.793104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087394Jy sigma=0.000646 ! Fit after self-cal, rms=0.087389Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087389Jy sigma=0.000645 ! Fit after self-cal, rms=0.087388Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.037 mas, bmaj=9.827 mas, bpa=-88.29 degrees ! Estimated noise=3724.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00222287 Jy ! Component: 100 - total flux cleaned = -0.00282561 Jy ! Component: 150 - total flux cleaned = -0.00312114 Jy ! Component: 200 - total flux cleaned = -0.0033072 Jy ! Total flux subtracted in 200 components = -0.0033072 Jy ! Clean residual min=-0.008571 max=0.010747 Jy/beam ! Clean residual mean=-0.000008 rms=0.002351 Jy/beam ! Combined flux in latest and established models = 0.789797 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.789797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087301Jy sigma=0.000645 ! Fit after self-cal, rms=0.087295Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-104, -41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100265 Jy ! Component: 100 - total flux cleaned = 0.0154145 Jy ! Component: 150 - total flux cleaned = 0.018554 Jy ! Component: 200 - total flux cleaned = 0.0193603 Jy ! Total flux subtracted in 200 components = 0.0193603 Jy ! Clean residual min=-0.006642 max=0.005827 Jy/beam ! Clean residual mean=-0.000007 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.809157 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 65 components and 0.809157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086081Jy sigma=0.000635 ! Fit after self-cal, rms=0.086040Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086040Jy sigma=0.000635 ! Fit after self-cal, rms=0.085881Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=9.829 mas, bpa=-88.29 degrees ! Estimated noise=3716.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277818 Jy ! Component: 100 - total flux cleaned = 0.00307663 Jy ! Component: 150 - total flux cleaned = 0.00325908 Jy ! Component: 200 - total flux cleaned = 0.00342827 Jy ! Total flux subtracted in 200 components = 0.00342827 Jy ! Clean residual min=-0.005747 max=0.005639 Jy/beam ! Clean residual mean=-0.000008 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.812585 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 93 components and 0.812585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085666Jy sigma=0.000633 ! Fit after self-cal, rms=0.085661Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346656 Jy ! Component: 100 - total flux cleaned = 0.000578495 Jy ! Component: 150 - total flux cleaned = 0.000867355 Jy ! Component: 200 - total flux cleaned = 0.000934539 Jy ! Total flux subtracted in 200 components = 0.000934539 Jy ! Clean residual min=-0.005786 max=0.005439 Jy/beam ! Clean residual mean=-0.000007 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.81352 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.81352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085544Jy sigma=0.000632 ! Fit after self-cal, rms=0.085542Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085542Jy sigma=0.000632 ! Fit after self-cal, rms=0.085474Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.545 mas, bmaj=12.1 mas, bpa=87 degrees ! Estimated noise=4351.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443226 Jy ! Component: 100 - total flux cleaned = 0.00112124 Jy ! Component: 150 - total flux cleaned = 0.00156795 Jy ! Component: 200 - total flux cleaned = 0.00178659 Jy ! Total flux subtracted in 200 components = 0.00178659 Jy ! Clean residual min=-0.004668 max=0.004286 Jy/beam ! Clean residual mean=-0.000008 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.815306 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 129 components and 0.815306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085424Jy sigma=0.000631 ! Fit after self-cal, rms=0.085418Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173014 Jy ! Component: 100 - total flux cleaned = 0.000377093 Jy ! Component: 150 - total flux cleaned = 0.000468125 Jy ! Component: 200 - total flux cleaned = 0.000467969 Jy ! Total flux subtracted in 200 components = 0.000467969 Jy ! Clean residual min=-0.004701 max=0.004226 Jy/beam ! Clean residual mean=-0.000006 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.815774 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 150 components and 0.815774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085402Jy sigma=0.000631 ! Fit after self-cal, rms=0.085392Jy sigma=0.000631 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=9.828 mas, bpa=-88.3 degrees ! Estimated noise=3712.97 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.041 x 9.828 at -88.3 degrees (North through East) ! Clean map min=-0.0064021 max=0.72324 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085392Jy sigma=0.000631 ! Fit after self-cal, rms=0.078156Jy sigma=0.000574 ! Inverting map and beam ! Estimated beam: bmin=4.042 mas, bmaj=9.827 mas, bpa=-88.3 degrees ! Estimated noise=3713.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052627 Jy ! Component: 100 - total flux cleaned = 0.000593538 Jy ! Component: 150 - total flux cleaned = 0.00071483 Jy ! Component: 200 - total flux cleaned = 0.000661648 Jy ! Total flux subtracted in 200 components = 0.000661648 Jy ! Clean residual min=-0.005121 max=0.005391 Jy/beam ! Clean residual mean=-0.000004 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.816436 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 163 components and 0.816436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078062Jy sigma=0.000573 ! Fit after self-cal, rms=0.078061Jy sigma=0.000573 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123059 Jy ! Component: 100 - total flux cleaned = -0.00017179 Jy ! Component: 150 - total flux cleaned = -0.000262319 Jy ! Component: 200 - total flux cleaned = -0.00030502 Jy ! Total flux subtracted in 200 components = -0.00030502 Jy ! Clean residual min=-0.005147 max=0.005377 Jy/beam ! Clean residual mean=-0.000004 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.816131 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 173 components and 0.816131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078007Jy sigma=0.000573 ! Fit after self-cal, rms=0.078008Jy sigma=0.000573 ! Inverting map ! Added new window around map position (-119.5, 115). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771149 Jy ! Component: 100 - total flux cleaned = 0.000904454 Jy ! Component: 150 - total flux cleaned = 0.000883976 Jy ! Component: 200 - total flux cleaned = 0.000514145 Jy ! Total flux subtracted in 200 components = 0.000514145 Jy ! Clean residual min=-0.004959 max=0.004494 Jy/beam ! Clean residual mean=-0.000004 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.816645 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 199 components and 0.816645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077586Jy sigma=0.000569 ! Fit after self-cal, rms=0.077560Jy sigma=0.000569 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077560Jy sigma=0.000569 ! Fit after self-cal, rms=0.077487Jy sigma=0.000569 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=8.946 mas, bpa=-89.49 degrees ! Estimated noise=4373.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.545799 Jy ! Component: 100 - total flux cleaned = 0.673483 Jy ! Component: 150 - total flux cleaned = 0.728397 Jy ! Component: 200 - total flux cleaned = 0.757432 Jy ! Total flux subtracted in 200 components = 0.757432 Jy ! Clean residual min=-0.011535 max=0.014330 Jy/beam ! Clean residual mean=-0.000005 rms=0.003625 Jy/beam ! Combined flux in latest and established models = 0.757432 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.757432 Jy ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=9.83 mas, bpa=-88.27 degrees ! Estimated noise=3711.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189335 Jy ! Component: 100 - total flux cleaned = 0.0270653 Jy ! Component: 150 - total flux cleaned = 0.0340803 Jy ! Component: 200 - total flux cleaned = 0.0395121 Jy ! Total flux subtracted in 200 components = 0.0395121 Jy ! Clean residual min=-0.007044 max=0.007684 Jy/beam ! Clean residual mean=-0.000009 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.796944 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.796944 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.543 mas, bmaj=12.1 mas, bpa=87.06 degrees ! Estimated noise=4349.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794417 Jy ! Component: 100 - total flux cleaned = 0.012963 Jy ! Component: 150 - total flux cleaned = 0.0142378 Jy ! Component: 200 - total flux cleaned = 0.0147767 Jy ! Total flux subtracted in 200 components = 0.0147767 Jy ! Clean residual min=-0.005616 max=0.004266 Jy/beam ! Clean residual mean=-0.000012 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 0.811721 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479939 Jy ! Component: 100 - total flux cleaned = 0.000921681 Jy ! Component: 150 - total flux cleaned = 0.00122767 Jy ! Component: 200 - total flux cleaned = 0.0016934 Jy ! Total flux subtracted in 200 components = 0.0016934 Jy ! Clean residual min=-0.005179 max=0.003936 Jy/beam ! Clean residual mean=-0.000008 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.813414 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 74 components and 0.813414 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=9.83 mas, bpa=-88.27 degrees ! Estimated noise=3711.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000909137 Jy ! Component: 100 - total flux cleaned = 0.000906895 Jy ! Component: 150 - total flux cleaned = 0.00115964 Jy ! Component: 200 - total flux cleaned = 0.00137774 Jy ! Total flux subtracted in 200 components = 0.00137774 Jy ! Clean residual min=-0.005333 max=0.005124 Jy/beam ! Clean residual mean=-0.000005 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.814792 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 103 components and 0.814792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077930Jy sigma=0.000572 ! Fit after self-cal, rms=0.077893Jy sigma=0.000572 wmodel J1849+6705_S_2017_10_09_pus_map.mod ! Writing 103 model components to file: J1849+6705_S_2017_10_09_pus_map.mod wobs J1849+6705_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1849+6705_S_2017_10_09_pus_uvs.fits wwins J1849+6705_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J1849+6705_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159935 Jy ! Component: 100 - total flux cleaned = 0.000338226 Jy ! Component: 150 - total flux cleaned = 0.000255155 Jy ! Component: 200 - total flux cleaned = 0.000255806 Jy ! Component: 250 - total flux cleaned = 0.000692622 Jy ! Component: 300 - total flux cleaned = 0.0011089 Jy ! Component: 350 - total flux cleaned = 0.0015063 Jy ! Component: 400 - total flux cleaned = 0.00176139 Jy ! Component: 450 - total flux cleaned = 0.00194743 Jy ! Component: 500 - total flux cleaned = 0.00224631 Jy ! Component: 550 - total flux cleaned = 0.00253368 Jy ! Component: 600 - total flux cleaned = 0.00286679 Jy ! Component: 650 - total flux cleaned = 0.00318798 Jy ! Component: 700 - total flux cleaned = 0.00355269 Jy ! Component: 750 - total flux cleaned = 0.0038588 Jy ! Component: 800 - total flux cleaned = 0.00425714 Jy ! Component: 850 - total flux cleaned = 0.00464544 Jy ! Component: 900 - total flux cleaned = 0.00497631 Jy ! Component: 950 - total flux cleaned = 0.00530015 Jy ! Component: 1000 - total flux cleaned = 0.00557246 Jy ! Component: 1050 - total flux cleaned = 0.00592845 Jy ! Component: 1100 - total flux cleaned = 0.00592861 Jy ! Component: 1150 - total flux cleaned = 0.00610133 Jy ! Component: 1200 - total flux cleaned = 0.00614342 Jy ! Component: 1250 - total flux cleaned = 0.00610107 Jy ! Component: 1300 - total flux cleaned = 0.00610051 Jy ! Component: 1350 - total flux cleaned = 0.00610014 Jy ! Component: 1400 - total flux cleaned = 0.00614003 Jy ! Component: 1450 - total flux cleaned = 0.00617921 Jy ! Component: 1500 - total flux cleaned = 0.00621811 Jy ! Component: 1550 - total flux cleaned = 0.00625643 Jy ! Component: 1600 - total flux cleaned = 0.00629455 Jy ! Component: 1650 - total flux cleaned = 0.00629466 Jy ! Component: 1700 - total flux cleaned = 0.00640758 Jy ! Component: 1750 - total flux cleaned = 0.0064449 Jy ! Component: 1800 - total flux cleaned = 0.00662943 Jy ! Component: 1850 - total flux cleaned = 0.00673905 Jy ! Component: 1900 - total flux cleaned = 0.00681191 Jy ! Component: 1950 - total flux cleaned = 0.00684823 Jy ! Component: 2000 - total flux cleaned = 0.00692008 Jy ! Component: 2050 - total flux cleaned = 0.00684824 Jy ! Component: 2100 - total flux cleaned = 0.00688362 Jy ! Component: 2150 - total flux cleaned = 0.00684818 Jy ! Component: 2200 - total flux cleaned = 0.00677743 Jy ! Component: 2250 - total flux cleaned = 0.00681281 Jy ! Component: 2300 - total flux cleaned = 0.0067074 Jy ! Component: 2350 - total flux cleaned = 0.00663744 Jy ! Component: 2400 - total flux cleaned = 0.00656767 Jy ! Component: 2450 - total flux cleaned = 0.00653246 Jy ! Component: 2500 - total flux cleaned = 0.00639265 Jy ! Component: 2550 - total flux cleaned = 0.00632271 Jy ! Component: 2600 - total flux cleaned = 0.00625286 Jy ! Component: 2650 - total flux cleaned = 0.00611318 Jy ! Component: 2700 - total flux cleaned = 0.00604348 Jy ! Component: 2750 - total flux cleaned = 0.00593849 Jy ! Component: 2800 - total flux cleaned = 0.00590341 Jy ! Component: 2850 - total flux cleaned = 0.00576307 Jy ! Component: 2900 - total flux cleaned = 0.00576308 Jy ! Component: 2950 - total flux cleaned = 0.00579841 Jy ! Component: 3000 - total flux cleaned = 0.00579843 Jy ! Component: 3050 - total flux cleaned = 0.00583425 Jy ! Component: 3100 - total flux cleaned = 0.00594164 Jy ! Component: 3150 - total flux cleaned = 0.00590567 Jy ! Component: 3200 - total flux cleaned = 0.00597793 Jy ! Component: 3250 - total flux cleaned = 0.00601442 Jy ! Component: 3300 - total flux cleaned = 0.00612378 Jy ! Component: 3350 - total flux cleaned = 0.00627069 Jy ! Component: 3400 - total flux cleaned = 0.00627067 Jy ! Component: 3450 - total flux cleaned = 0.00641976 Jy ! Component: 3500 - total flux cleaned = 0.00649502 Jy ! Component: 3550 - total flux cleaned = 0.00657102 Jy ! Component: 3600 - total flux cleaned = 0.00664779 Jy ! Component: 3650 - total flux cleaned = 0.0066861 Jy ! Component: 3700 - total flux cleaned = 0.00684154 Jy ! Component: 3750 - total flux cleaned = 0.00688095 Jy ! Component: 3800 - total flux cleaned = 0.00695998 Jy ! Component: 3850 - total flux cleaned = 0.00707995 Jy ! Component: 3900 - total flux cleaned = 0.00720146 Jy ! Component: 3950 - total flux cleaned = 0.00724243 Jy ! Component: 4000 - total flux cleaned = 0.00732483 Jy ! Component: 4050 - total flux cleaned = 0.00749105 Jy ! Total flux subtracted in 4096 components = 0.00761775 Jy ! Clean residual min=-0.002612 max=0.002447 Jy/beam ! Clean residual mean=-0.000004 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.82241 Jy keep ! Adding 216 model components to the UV plane model. ! The established model now contains 319 components and 0.82241 Jy ![Exited script file: muppet] wmap "J1849+6705_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.041 x 9.83 at -88.27 degrees (North through East) ! Clean map min=-0.0087445 max=0.72153 Jy/beam ! Writing clean map to FITS file: J1849+6705_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.721532 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000673176 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.279894 0.279894 0.559789 1.11958 2.23916 4.47831 8.95662 17.9132 35.8265 71.653 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.721 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.041 x 9.83 at -88.27 degrees (North through East) ! Clean map min=-0.0087445 max=0.72153 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1849+6705_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:14 2019