! Started logfile: J1848+3219_S_2017_07_16_pus_uvs.log on Thu May 9 11:16:05 2019 obs J1848+3219_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1848+3219_S_2017_07_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.724444 visibilities/baseline/integration-bin. ! Found source: J1848+3219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 1304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1848+3219_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.584844Jy sigma=0.006301 ! Fit after self-cal, rms=0.579866Jy sigma=0.006247 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.427 mas, bmaj=7.668 mas, bpa=-3.973 degrees ! Estimated noise=2328.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.327344 Jy ! Component: 100 - total flux cleaned = 0.401643 Jy ! Total flux subtracted in 100 components = 0.401643 Jy ! Clean residual min=-0.013730 max=0.027247 Jy/beam ! Clean residual mean=0.000038 rms=0.004639 Jy/beam ! Combined flux in latest and established models = 0.401643 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.401643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084431Jy sigma=0.000868 ! Fit after self-cal, rms=0.084436Jy sigma=0.000868 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=8.135 mas, bpa=-3.56 degrees ! Estimated noise=2058.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310776 Jy ! Component: 100 - total flux cleaned = 0.0448464 Jy ! Component: 150 - total flux cleaned = 0.0516161 Jy ! Component: 200 - total flux cleaned = 0.0556942 Jy ! Total flux subtracted in 200 components = 0.0556942 Jy ! Clean residual min=-0.008928 max=0.009356 Jy/beam ! Clean residual mean=0.000048 rms=0.002453 Jy/beam ! Combined flux in latest and established models = 0.457337 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.457337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073448Jy sigma=0.000747 ! Fit after self-cal, rms=0.073449Jy sigma=0.000747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.94 KP 1.07 ! LA 1.00 MK 1.02 NL 0.91 OV 1.01 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.97 KP 1.02 ! LA 0.93 MK 1.00 NL 1.09 OV 1.04 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 0.97 KP 1.02 ! LA 0.97 MK 1.01 NL 1.07 OV 0.96 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 1.00* ! LA 0.97 MK 1.48 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.073449Jy sigma=0.000747 ! Fit after self-cal, rms=0.066244Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=8.11 mas, bpa=-3.473 degrees ! Estimated noise=2059.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151558 Jy ! Component: 100 - total flux cleaned = 0.00181165 Jy ! Component: 150 - total flux cleaned = 0.00187253 Jy ! Component: 200 - total flux cleaned = 0.00192423 Jy ! Total flux subtracted in 200 components = 0.00192423 Jy ! Clean residual min=-0.006061 max=0.006261 Jy/beam ! Clean residual mean=0.000024 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 0.459262 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.459262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066080Jy sigma=0.000668 ! Fit after self-cal, rms=0.066098Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066098Jy sigma=0.000668 ! Fit after self-cal, rms=0.066108Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.851 mas, bmaj=8.101 mas, bpa=-3.432 degrees ! Estimated noise=2059.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550601 Jy ! Component: 100 - total flux cleaned = 0.000606168 Jy ! Component: 150 - total flux cleaned = 0.000605628 Jy ! Component: 200 - total flux cleaned = 0.000648341 Jy ! Total flux subtracted in 200 components = 0.000648341 Jy ! Clean residual min=-0.005837 max=0.005993 Jy/beam ! Clean residual mean=0.000025 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.45991 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.45991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066019Jy sigma=0.000667 ! Fit after self-cal, rms=0.066012Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185457 Jy ! Component: 100 - total flux cleaned = -2.96111e-05 Jy ! Component: 150 - total flux cleaned = 6.72415e-06 Jy ! Component: 200 - total flux cleaned = 7.28108e-05 Jy ! Total flux subtracted in 200 components = 7.28108e-05 Jy ! Clean residual min=-0.005713 max=0.005913 Jy/beam ! Clean residual mean=0.000024 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.459983 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.459983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065966Jy sigma=0.000666 ! Fit after self-cal, rms=0.065962Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065962Jy sigma=0.000666 ! Fit after self-cal, rms=0.065966Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=8.093 mas, bpa=-3.375 degrees ! Estimated noise=2060.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240978 Jy ! Component: 100 - total flux cleaned = 0.000205127 Jy ! Component: 150 - total flux cleaned = 0.000204943 Jy ! Component: 200 - total flux cleaned = 0.000265285 Jy ! Total flux subtracted in 200 components = 0.000265285 Jy ! Clean residual min=-0.005738 max=0.005877 Jy/beam ! Clean residual mean=0.000025 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.460248 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.460248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065917Jy sigma=0.000666 ! Fit after self-cal, rms=0.065915Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.6709e-05 Jy ! Component: 100 - total flux cleaned = -1.29826e-05 Jy ! Component: 150 - total flux cleaned = 1.3542e-05 Jy ! Component: 200 - total flux cleaned = 6.27702e-05 Jy ! Total flux subtracted in 200 components = 6.27702e-05 Jy ! Clean residual min=-0.005716 max=0.005852 Jy/beam ! Clean residual mean=0.000025 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.460311 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.460311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065889Jy sigma=0.000666 ! Fit after self-cal, rms=0.065888Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065888Jy sigma=0.000666 ! Fit after self-cal, rms=0.065901Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.641 mas, bmaj=10.22 mas, bpa=-6.64 degrees ! Estimated noise=2706.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131232 Jy ! Component: 100 - total flux cleaned = 0.00129691 Jy ! Component: 150 - total flux cleaned = 0.00132868 Jy ! Component: 200 - total flux cleaned = 0.00129289 Jy ! Total flux subtracted in 200 components = 0.00129289 Jy ! Clean residual min=-0.008051 max=0.008914 Jy/beam ! Clean residual mean=0.000062 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 0.461604 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.461604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065942Jy sigma=0.000666 ! Fit after self-cal, rms=0.065912Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.1245e-05 Jy ! Component: 100 - total flux cleaned = -0.000103726 Jy ! Component: 150 - total flux cleaned = -0.000134675 Jy ! Component: 200 - total flux cleaned = -0.000135598 Jy ! Total flux subtracted in 200 components = -0.000135598 Jy ! Clean residual min=-0.008054 max=0.008649 Jy/beam ! Clean residual mean=0.000061 rms=0.002310 Jy/beam ! Combined flux in latest and established models = 0.461468 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.461468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065974Jy sigma=0.000666 ! Fit after self-cal, rms=0.065958Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=8.086 mas, bpa=-3.318 degrees ! Estimated noise=2061.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.854 x 8.086 at -3.318 degrees (North through East) ! Clean map min=-0.0055762 max=0.42612 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.449 mas, bmaj=7.619 mas, bpa=-3.729 degrees ! Estimated noise=2338.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.327724 Jy ! Component: 100 - total flux cleaned = 0.400655 Jy ! Component: 150 - total flux cleaned = 0.427021 Jy ! Component: 200 - total flux cleaned = 0.440569 Jy ! Total flux subtracted in 200 components = 0.440569 Jy ! Clean residual min=-0.007601 max=0.007739 Jy/beam ! Clean residual mean=0.000022 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.440569 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.440569 Jy ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=8.086 mas, bpa=-3.318 degrees ! Estimated noise=2061.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-67, 74). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00888848 Jy ! Component: 100 - total flux cleaned = 0.0144151 Jy ! Component: 150 - total flux cleaned = 0.0180367 Jy ! Component: 200 - total flux cleaned = 0.0195064 Jy ! Total flux subtracted in 200 components = 0.0195064 Jy ! Clean residual min=-0.006660 max=0.005509 Jy/beam ! Clean residual mean=0.000024 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.460075 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 51 components and 0.460075 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.641 mas, bmaj=10.22 mas, bpa=-6.64 degrees ! Estimated noise=2706.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331547 Jy ! Component: 100 - total flux cleaned = 0.00450386 Jy ! Component: 150 - total flux cleaned = 0.00540187 Jy ! Component: 200 - total flux cleaned = 0.00615045 Jy ! Total flux subtracted in 200 components = 0.00615045 Jy ! Clean residual min=-0.006987 max=0.005653 Jy/beam ! Clean residual mean=0.000039 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 0.466226 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415835 Jy ! Component: 100 - total flux cleaned = 0.000564747 Jy ! Component: 150 - total flux cleaned = 0.000656261 Jy ! Component: 200 - total flux cleaned = 0.00069826 Jy ! Total flux subtracted in 200 components = 0.00069826 Jy ! Clean residual min=-0.006727 max=0.005414 Jy/beam ! Clean residual mean=0.000036 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.466924 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 0.466924 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=8.086 mas, bpa=-3.318 degrees ! Estimated noise=2061.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000726733 Jy ! Component: 100 - total flux cleaned = 0.000534981 Jy ! Component: 150 - total flux cleaned = 0.000288668 Jy ! Component: 200 - total flux cleaned = 0.000215559 Jy ! Total flux subtracted in 200 components = 0.000215559 Jy ! Clean residual min=-0.005672 max=0.005025 Jy/beam ! Clean residual mean=0.000015 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.467139 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.467139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066021Jy sigma=0.000665 ! Fit after self-cal, rms=0.065944Jy sigma=0.000664 wmodel J1848+3219_S_2017_07_16_pus_map.mod ! Writing 89 model components to file: J1848+3219_S_2017_07_16_pus_map.mod wobs J1848+3219_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1848+3219_S_2017_07_16_pus_uvs.fits wwins J1848+3219_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1848+3219_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209455 Jy ! Component: 100 - total flux cleaned = 0.000536814 Jy ! Component: 150 - total flux cleaned = 0.00107439 Jy ! Component: 200 - total flux cleaned = 0.00122255 Jy ! Component: 250 - total flux cleaned = 0.00109144 Jy ! Component: 300 - total flux cleaned = 0.000835545 Jy ! Component: 350 - total flux cleaned = 0.000591174 Jy ! Component: 400 - total flux cleaned = 0.000242291 Jy ! Component: 450 - total flux cleaned = 0.000241865 Jy ! Component: 500 - total flux cleaned = 0.000135714 Jy ! Component: 550 - total flux cleaned = 8.63804e-05 Jy ! Component: 600 - total flux cleaned = 8.65837e-05 Jy ! Component: 650 - total flux cleaned = -9.64733e-06 Jy ! Component: 700 - total flux cleaned = 3.54112e-05 Jy ! Component: 750 - total flux cleaned = 7.90994e-05 Jy ! Component: 800 - total flux cleaned = 0.000165321 Jy ! Component: 850 - total flux cleaned = 0.000165874 Jy ! Component: 900 - total flux cleaned = 0.000207174 Jy ! Component: 950 - total flux cleaned = 0.000286195 Jy ! Component: 1000 - total flux cleaned = 0.000285839 Jy ! Component: 1050 - total flux cleaned = 0.000400933 Jy ! Component: 1100 - total flux cleaned = 0.000474488 Jy ! Component: 1150 - total flux cleaned = 0.000510684 Jy ! Component: 1200 - total flux cleaned = 0.000652612 Jy ! Component: 1250 - total flux cleaned = 0.000652817 Jy ! Component: 1300 - total flux cleaned = 0.000755134 Jy ! Component: 1350 - total flux cleaned = 0.00088818 Jy ! Component: 1400 - total flux cleaned = 0.000921346 Jy ! Component: 1450 - total flux cleaned = 0.000888652 Jy ! Component: 1500 - total flux cleaned = 0.000920398 Jy ! Component: 1550 - total flux cleaned = 0.000888725 Jy ! Component: 1600 - total flux cleaned = 0.000826869 Jy ! Component: 1650 - total flux cleaned = 0.000766271 Jy ! Component: 1700 - total flux cleaned = 0.000766177 Jy ! Component: 1750 - total flux cleaned = 0.000707602 Jy ! Component: 1800 - total flux cleaned = 0.000708021 Jy ! Component: 1850 - total flux cleaned = 0.000792927 Jy ! Component: 1900 - total flux cleaned = 0.000764644 Jy ! Component: 1950 - total flux cleaned = 0.000847596 Jy ! Component: 2000 - total flux cleaned = 0.000847598 Jy ! Component: 2050 - total flux cleaned = 0.000929012 Jy ! Component: 2100 - total flux cleaned = 0.000955952 Jy ! Component: 2150 - total flux cleaned = 0.00100888 Jy ! Component: 2200 - total flux cleaned = 0.00106139 Jy ! Component: 2250 - total flux cleaned = 0.00108769 Jy ! Component: 2300 - total flux cleaned = 0.00119024 Jy ! Component: 2350 - total flux cleaned = 0.00126608 Jy ! Component: 2400 - total flux cleaned = 0.001241 Jy ! Component: 2450 - total flux cleaned = 0.00129095 Jy ! Component: 2500 - total flux cleaned = 0.0012661 Jy ! Component: 2550 - total flux cleaned = 0.00129099 Jy ! Component: 2600 - total flux cleaned = 0.0013403 Jy ! Component: 2650 - total flux cleaned = 0.00131588 Jy ! Component: 2700 - total flux cleaned = 0.00129149 Jy ! Component: 2750 - total flux cleaned = 0.00126726 Jy ! Component: 2800 - total flux cleaned = 0.00129141 Jy ! Component: 2850 - total flux cleaned = 0.00121919 Jy ! Component: 2900 - total flux cleaned = 0.00121918 Jy ! Component: 2950 - total flux cleaned = 0.00121936 Jy ! Component: 3000 - total flux cleaned = 0.00114771 Jy ! Component: 3050 - total flux cleaned = 0.00110033 Jy ! Component: 3100 - total flux cleaned = 0.00107662 Jy ! Component: 3150 - total flux cleaned = 0.000958294 Jy ! Component: 3200 - total flux cleaned = 0.000958453 Jy ! Component: 3250 - total flux cleaned = 0.000887596 Jy ! Component: 3300 - total flux cleaned = 0.000793368 Jy ! Component: 3350 - total flux cleaned = 0.000746429 Jy ! Component: 3400 - total flux cleaned = 0.000629061 Jy ! Component: 3450 - total flux cleaned = 0.000629178 Jy ! Component: 3500 - total flux cleaned = 0.000605833 Jy ! Component: 3550 - total flux cleaned = 0.000582624 Jy ! Component: 3600 - total flux cleaned = 0.000582549 Jy ! Component: 3650 - total flux cleaned = 0.000582627 Jy ! Component: 3700 - total flux cleaned = 0.000582721 Jy ! Component: 3750 - total flux cleaned = 0.000559237 Jy ! Component: 3800 - total flux cleaned = 0.000559283 Jy ! Component: 3850 - total flux cleaned = 0.000559286 Jy ! Component: 3900 - total flux cleaned = 0.000511971 Jy ! Component: 3950 - total flux cleaned = 0.000488241 Jy ! Component: 4000 - total flux cleaned = 0.000488297 Jy ! Component: 4050 - total flux cleaned = 0.000440548 Jy ! Total flux subtracted in 4096 components = 0.000416601 Jy ! Clean residual min=-0.001400 max=0.001360 Jy/beam ! Clean residual mean=-0.000004 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.467556 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 337 components and 0.467556 Jy ![Exited script file: muppet] wmap "J1848+3219_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.854 x 8.086 at -3.318 degrees (North through East) ! Clean map min=-0.0034537 max=0.42573 Jy/beam ! Writing clean map to FITS file: J1848+3219_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.425726 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000369768 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.260568 0.260568 0.521136 1.04227 2.08454 4.16909 8.33817 16.6763 33.3527 66.7054 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.425 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.854 x 8.086 at -3.318 degrees (North through East) ! Clean map min=-0.0034537 max=0.42573 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1848+3219_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:16:09 2019