! Started logfile: J1848+3219_S_2017_05_01_pus_uvs.log on Wed May 1 18:42:17 2019 obs J1848+3219_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1848+3219_S_2017_05_01_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.794017 visibilities/baseline/integration-bin. ! Found source: J1848+3219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 3716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1848+3219_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.531441Jy sigma=0.025459 ! Fit after self-cal, rms=0.529240Jy sigma=0.025452 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=5.774 mas, bpa=-10.47 degrees ! Estimated noise=1492.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.302651 Jy ! Component: 100 - total flux cleaned = 0.37053 Jy ! Total flux subtracted in 100 components = 0.37053 Jy ! Clean residual min=-0.067711 max=0.069595 Jy/beam ! Clean residual mean=-0.000167 rms=0.021807 Jy/beam ! Combined flux in latest and established models = 0.37053 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.37053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179046Jy sigma=0.009085 ! Fit after self-cal, rms=0.179040Jy sigma=0.009085 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=6.784 mas, bpa=-8.018 degrees ! Estimated noise=1118.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00603873 Jy ! Component: 100 - total flux cleaned = -0.00719433 Jy ! Component: 150 - total flux cleaned = -0.00825804 Jy ! Component: 200 - total flux cleaned = -0.00923551 Jy ! Total flux subtracted in 200 components = -0.00923551 Jy ! Clean residual min=-0.085134 max=0.083155 Jy/beam ! Clean residual mean=-0.000257 rms=0.026601 Jy/beam ! Combined flux in latest and established models = 0.361295 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.361295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176492Jy sigma=0.009023 ! Fit after self-cal, rms=0.176454Jy sigma=0.009023 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.81 HN 0.92 KP 0.87 ! LA 0.84 MK 0.94 NL 0.82 OV 0.81 ! PT 0.86 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.85 HN 0.99 KP 0.82 ! LA 0.80 MK 0.96 NL 0.87 OV 0.87 ! PT 0.83 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.87 HN 0.94 KP 0.83 ! LA 0.84 MK 0.96 NL 0.89 OV 0.80 ! PT 0.83 SC 0.96 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.90 HN 0.94 KP 1.00* ! LA 29.96 MK 1.19 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.176454Jy sigma=0.009023 ! Fit after self-cal, rms=2.542099Jy sigma=0.000930 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=6.537 mas, bpa=-5.489 degrees ! Estimated noise=1129.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112099 Jy ! Component: 100 - total flux cleaned = 0.0170591 Jy ! Component: 150 - total flux cleaned = 0.020608 Jy ! Component: 200 - total flux cleaned = 0.0213209 Jy ! Total flux subtracted in 200 components = 0.0213209 Jy ! Clean residual min=-0.009928 max=0.008747 Jy/beam ! Clean residual mean=0.000096 rms=0.002426 Jy/beam ! Combined flux in latest and established models = 0.382616 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.382616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.540427Jy sigma=0.000933 ! Fit after self-cal, rms=2.540591Jy sigma=0.000928 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.540591Jy sigma=0.000928 ! Fit after self-cal, rms=1.875884Jy sigma=0.000751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=6.508 mas, bpa=-5.694 degrees ! Estimated noise=1135.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389558 Jy ! Component: 100 - total flux cleaned = 0.00554684 Jy ! Component: 150 - total flux cleaned = 0.00587707 Jy ! Component: 200 - total flux cleaned = 0.00606443 Jy ! Total flux subtracted in 200 components = 0.00606443 Jy ! Clean residual min=-0.004887 max=0.005228 Jy/beam ! Clean residual mean=0.000012 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.38868 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.38868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.875451Jy sigma=0.000752 ! Fit after self-cal, rms=1.875463Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.15616e-05 Jy ! Component: 100 - total flux cleaned = 2.45572e-05 Jy ! Component: 150 - total flux cleaned = 5.31322e-05 Jy ! Component: 200 - total flux cleaned = 7.98691e-05 Jy ! Total flux subtracted in 200 components = 7.98691e-05 Jy ! Clean residual min=-0.004899 max=0.005177 Jy/beam ! Clean residual mean=0.000012 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.38876 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.38876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.875448Jy sigma=0.000751 ! Fit after self-cal, rms=1.875448Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.875448Jy sigma=0.000751 ! Fit after self-cal, rms=0.065483Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=6.503 mas, bpa=-5.579 degrees ! Estimated noise=1136.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000747248 Jy ! Component: 100 - total flux cleaned = 0.000941348 Jy ! Component: 150 - total flux cleaned = 0.00107105 Jy ! Component: 200 - total flux cleaned = 0.00115961 Jy ! Total flux subtracted in 200 components = 0.00115961 Jy ! Clean residual min=-0.003264 max=0.003481 Jy/beam ! Clean residual mean=0.000012 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.38992 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.38992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065425Jy sigma=0.000654 ! Fit after self-cal, rms=0.065392Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30, 33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013979 Jy ! Component: 100 - total flux cleaned = 0.00147817 Jy ! Component: 150 - total flux cleaned = 0.00147773 Jy ! Component: 200 - total flux cleaned = 0.00158687 Jy ! Total flux subtracted in 200 components = 0.00158687 Jy ! Clean residual min=-0.003138 max=0.003048 Jy/beam ! Clean residual mean=0.000011 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.391507 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.391507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065173Jy sigma=0.000651 ! Fit after self-cal, rms=0.065156Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065156Jy sigma=0.000651 ! Fit after self-cal, rms=0.065159Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.261 mas, bmaj=9.811 mas, bpa=2.818 degrees ! Estimated noise=1357.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000856532 Jy ! Component: 100 - total flux cleaned = 0.00101414 Jy ! Component: 150 - total flux cleaned = 0.00113289 Jy ! Component: 200 - total flux cleaned = 0.0012873 Jy ! Total flux subtracted in 200 components = 0.0012873 Jy ! Clean residual min=-0.003352 max=0.003117 Jy/beam ! Clean residual mean=0.000016 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.392794 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.392794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065138Jy sigma=0.000650 ! Fit after self-cal, rms=0.065128Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348116 Jy ! Component: 100 - total flux cleaned = 0.000496814 Jy ! Component: 150 - total flux cleaned = 0.000574641 Jy ! Component: 200 - total flux cleaned = 0.000642445 Jy ! Total flux subtracted in 200 components = 0.000642445 Jy ! Clean residual min=-0.003231 max=0.003013 Jy/beam ! Clean residual mean=0.000016 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.393436 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.393436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065131Jy sigma=0.000650 ! Fit after self-cal, rms=0.065129Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=6.498 mas, bpa=-5.516 degrees ! Estimated noise=1136.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.762 x 6.498 at -5.516 degrees (North through East) ! Clean map min=-0.0031112 max=0.38151 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=5.576 mas, bpa=-8.207 degrees ! Estimated noise=1454.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294808 Jy ! Component: 100 - total flux cleaned = 0.359221 Jy ! Component: 150 - total flux cleaned = 0.37675 Jy ! Component: 200 - total flux cleaned = 0.385362 Jy ! Total flux subtracted in 200 components = 0.385362 Jy ! Clean residual min=-0.004191 max=0.004827 Jy/beam ! Clean residual mean=0.000003 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.385362 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.385362 Jy ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=6.498 mas, bpa=-5.516 degrees ! Estimated noise=1136.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561393 Jy ! Component: 100 - total flux cleaned = 0.00652568 Jy ! Component: 150 - total flux cleaned = 0.00714571 Jy ! Component: 200 - total flux cleaned = 0.00776531 Jy ! Total flux subtracted in 200 components = 0.00776531 Jy ! Clean residual min=-0.003441 max=0.003377 Jy/beam ! Clean residual mean=0.000008 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.393127 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 43 components and 0.393127 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.261 mas, bmaj=9.811 mas, bpa=2.818 degrees ! Estimated noise=1357.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000934352 Jy ! Component: 100 - total flux cleaned = 0.000991887 Jy ! Component: 150 - total flux cleaned = 0.000879129 Jy ! Component: 200 - total flux cleaned = 0.000788004 Jy ! Total flux subtracted in 200 components = 0.000788004 Jy ! Clean residual min=-0.003290 max=0.003074 Jy/beam ! Clean residual mean=0.000015 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.393915 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.8334e-05 Jy ! Component: 100 - total flux cleaned = -8.0392e-05 Jy ! Component: 150 - total flux cleaned = -1.98926e-05 Jy ! Component: 200 - total flux cleaned = 3.50441e-05 Jy ! Total flux subtracted in 200 components = 3.50441e-05 Jy ! Clean residual min=-0.003236 max=0.003018 Jy/beam ! Clean residual mean=0.000015 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.39395 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 68 components and 0.39395 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=6.498 mas, bpa=-5.516 degrees ! Estimated noise=1136.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80219e-05 Jy ! Component: 100 - total flux cleaned = -0.000145388 Jy ! Component: 150 - total flux cleaned = -0.000203227 Jy ! Component: 200 - total flux cleaned = -0.000256875 Jy ! Total flux subtracted in 200 components = -0.000256875 Jy ! Clean residual min=-0.003159 max=0.003421 Jy/beam ! Clean residual mean=0.000008 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.393693 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.393693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065290Jy sigma=0.000652 ! Fit after self-cal, rms=0.065256Jy sigma=0.000651 wmodel J1848+3219_S_2017_05_01_pus_map.mod ! Writing 91 model components to file: J1848+3219_S_2017_05_01_pus_map.mod wobs J1848+3219_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1848+3219_S_2017_05_01_pus_uvs.fits wwins J1848+3219_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J1848+3219_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000897125 Jy ! Component: 100 - total flux cleaned = 0.00138885 Jy ! Component: 150 - total flux cleaned = 0.00164345 Jy ! Component: 200 - total flux cleaned = 0.00198782 Jy ! Component: 250 - total flux cleaned = 0.00241364 Jy ! Component: 300 - total flux cleaned = 0.00277905 Jy ! Component: 350 - total flux cleaned = 0.00300153 Jy ! Component: 400 - total flux cleaned = 0.00339275 Jy ! Component: 450 - total flux cleaned = 0.00347806 Jy ! Component: 500 - total flux cleaned = 0.00368676 Jy ! Component: 550 - total flux cleaned = 0.00372812 Jy ! Component: 600 - total flux cleaned = 0.00372787 Jy ! Component: 650 - total flux cleaned = 0.00372764 Jy ! Component: 700 - total flux cleaned = 0.00372672 Jy ! Component: 750 - total flux cleaned = 0.00357433 Jy ! Component: 800 - total flux cleaned = 0.00368743 Jy ! Component: 850 - total flux cleaned = 0.00372413 Jy ! Component: 900 - total flux cleaned = 0.0036512 Jy ! Component: 950 - total flux cleaned = 0.00368684 Jy ! Component: 1000 - total flux cleaned = 0.00354479 Jy ! Component: 1050 - total flux cleaned = 0.00358013 Jy ! Component: 1100 - total flux cleaned = 0.00358055 Jy ! Component: 1150 - total flux cleaned = 0.00361458 Jy ! Component: 1200 - total flux cleaned = 0.00361454 Jy ! Component: 1250 - total flux cleaned = 0.00364808 Jy ! Component: 1300 - total flux cleaned = 0.0035823 Jy ! Component: 1350 - total flux cleaned = 0.00361491 Jy ! Component: 1400 - total flux cleaned = 0.00358239 Jy ! Component: 1450 - total flux cleaned = 0.00355011 Jy ! Component: 1500 - total flux cleaned = 0.00339254 Jy ! Component: 1550 - total flux cleaned = 0.00336119 Jy ! Component: 1600 - total flux cleaned = 0.0032379 Jy ! Component: 1650 - total flux cleaned = 0.00323756 Jy ! Component: 1700 - total flux cleaned = 0.00317706 Jy ! Component: 1750 - total flux cleaned = 0.00329626 Jy ! Component: 1800 - total flux cleaned = 0.00302917 Jy ! Component: 1850 - total flux cleaned = 0.00302898 Jy ! Component: 1900 - total flux cleaned = 0.00305776 Jy ! Component: 1950 - total flux cleaned = 0.00279849 Jy ! Component: 2000 - total flux cleaned = 0.00277043 Jy ! Component: 2050 - total flux cleaned = 0.0027415 Jy ! Component: 2100 - total flux cleaned = 0.00257353 Jy ! Component: 2150 - total flux cleaned = 0.00260119 Jy ! Component: 2200 - total flux cleaned = 0.00257317 Jy ! Component: 2250 - total flux cleaned = 0.00249144 Jy ! Component: 2300 - total flux cleaned = 0.00254534 Jy ! Component: 2350 - total flux cleaned = 0.00243755 Jy ! Component: 2400 - total flux cleaned = 0.00241087 Jy ! Component: 2450 - total flux cleaned = 0.0023843 Jy ! Component: 2500 - total flux cleaned = 0.00230567 Jy ! Component: 2550 - total flux cleaned = 0.00238371 Jy ! Component: 2600 - total flux cleaned = 0.00230631 Jy ! Component: 2650 - total flux cleaned = 0.00228042 Jy ! Component: 2700 - total flux cleaned = 0.00212821 Jy ! Component: 2750 - total flux cleaned = 0.00212802 Jy ! Component: 2800 - total flux cleaned = 0.00210334 Jy ! Component: 2850 - total flux cleaned = 0.00195476 Jy ! Component: 2900 - total flux cleaned = 0.00197942 Jy ! Component: 2950 - total flux cleaned = 0.00193054 Jy ! Component: 3000 - total flux cleaned = 0.00185786 Jy ! Component: 3050 - total flux cleaned = 0.00173756 Jy ! Component: 3100 - total flux cleaned = 0.00176133 Jy ! Component: 3150 - total flux cleaned = 0.00169011 Jy ! Component: 3200 - total flux cleaned = 0.00166659 Jy ! Component: 3250 - total flux cleaned = 0.00150327 Jy ! Component: 3300 - total flux cleaned = 0.00155007 Jy ! Component: 3350 - total flux cleaned = 0.0015271 Jy ! Component: 3400 - total flux cleaned = 0.00145829 Jy ! Component: 3450 - total flux cleaned = 0.00150382 Jy ! Component: 3500 - total flux cleaned = 0.00136843 Jy ! Component: 3550 - total flux cleaned = 0.00130124 Jy ! Component: 3600 - total flux cleaned = 0.00134566 Jy ! Component: 3650 - total flux cleaned = 0.0013677 Jy ! Component: 3700 - total flux cleaned = 0.00125776 Jy ! Component: 3750 - total flux cleaned = 0.00123611 Jy ! Component: 3800 - total flux cleaned = 0.001149 Jy ! Component: 3850 - total flux cleaned = 0.00114915 Jy ! Component: 3900 - total flux cleaned = 0.00121367 Jy ! Component: 3950 - total flux cleaned = 0.00121371 Jy ! Component: 4000 - total flux cleaned = 0.0011924 Jy ! Component: 4050 - total flux cleaned = 0.00117122 Jy ! Total flux subtracted in 4096 components = 0.00104526 Jy ! Clean residual min=-0.001203 max=0.001177 Jy/beam ! Clean residual mean=-0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.394739 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 353 components and 0.394739 Jy ![Exited script file: muppet] wmap "J1848+3219_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.762 x 6.498 at -5.516 degrees (North through East) ! Clean map min=-0.0028022 max=0.38174 Jy/beam ! Writing clean map to FITS file: J1848+3219_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.38174 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000372756 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.29294 0.29294 0.58588 1.17176 2.34352 4.68704 9.37407 18.7481 37.4963 74.9926 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.381 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.762 x 6.498 at -5.516 degrees (North through East) ! Clean map min=-0.0028022 max=0.38174 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1848+3219_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:42:21 2019