! Started logfile: J1848+3219_S_2017_03_23_pus_uvs.log on Mon May 13 10:07:09 2019 obs J1848+3219_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1848+3219_S_2017_03_23_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.715741 visibilities/baseline/integration-bin. ! Found source: J1848+3219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 3092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1848+3219_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.630497Jy sigma=0.005421 ! Fit after self-cal, rms=0.625094Jy sigma=0.005382 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=6.749 mas, bpa=10.85 degrees ! Estimated noise=1941.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294353 Jy ! Component: 100 - total flux cleaned = 0.360441 Jy ! Total flux subtracted in 100 components = 0.360441 Jy ! Clean residual min=-0.013161 max=0.022697 Jy/beam ! Clean residual mean=-0.000008 rms=0.003963 Jy/beam ! Combined flux in latest and established models = 0.360441 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.360441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129770Jy sigma=0.001038 ! Fit after self-cal, rms=0.129775Jy sigma=0.001037 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.956 mas, bmaj=7.745 mas, bpa=12.77 degrees ! Estimated noise=1619.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328234 Jy ! Component: 100 - total flux cleaned = 0.0506406 Jy ! Component: 150 - total flux cleaned = 0.0617694 Jy ! Component: 200 - total flux cleaned = 0.0688809 Jy ! Total flux subtracted in 200 components = 0.0688809 Jy ! Clean residual min=-0.013062 max=0.013578 Jy/beam ! Clean residual mean=0.000006 rms=0.003325 Jy/beam ! Combined flux in latest and established models = 0.429321 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 32 components and 0.429321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121623Jy sigma=0.000951 ! Fit after self-cal, rms=0.121628Jy sigma=0.000951 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.92 KP 1.04 ! LA 0.97 MK 1.05 NL 0.88 OV 1.01 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.97 HN 0.96 KP 0.97 ! LA 0.98 MK 1.04 NL 1.06 OV 1.04 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 0.94 KP 0.85 ! LA 0.74 MK 1.08 NL 1.21 OV 0.94 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.03 HN 0.97 KP 1.00* ! LA 0.79 MK 1.39 NL 1.00* OV 3.43 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.121628Jy sigma=0.000951 ! Fit after self-cal, rms=0.107506Jy sigma=0.000691 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.002 mas, bmaj=7.794 mas, bpa=12.76 degrees ! Estimated noise=1619.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00595485 Jy ! Component: 100 - total flux cleaned = -0.00706747 Jy ! Component: 150 - total flux cleaned = -0.00726022 Jy ! Component: 200 - total flux cleaned = -0.00740319 Jy ! Total flux subtracted in 200 components = -0.00740319 Jy ! Clean residual min=-0.005177 max=0.005752 Jy/beam ! Clean residual mean=-0.000008 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.421918 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.421918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107008Jy sigma=0.000688 ! Fit after self-cal, rms=0.107546Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107546Jy sigma=0.000687 ! Fit after self-cal, rms=0.108923Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.017 mas, bmaj=7.82 mas, bpa=12.82 degrees ! Estimated noise=1618.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00289791 Jy ! Component: 100 - total flux cleaned = -0.003919 Jy ! Component: 150 - total flux cleaned = -0.00418932 Jy ! Component: 200 - total flux cleaned = -0.00438174 Jy ! Total flux subtracted in 200 components = -0.00438174 Jy ! Clean residual min=-0.003703 max=0.004407 Jy/beam ! Clean residual mean=-0.000007 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.417536 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.417537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108817Jy sigma=0.000661 ! Fit after self-cal, rms=0.108829Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (105.5, -79.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580108 Jy ! Component: 100 - total flux cleaned = 0.000223917 Jy ! Component: 150 - total flux cleaned = 4.65068e-05 Jy ! Component: 200 - total flux cleaned = -0.000190465 Jy ! Total flux subtracted in 200 components = -0.000190465 Jy ! Clean residual min=-0.003803 max=0.003829 Jy/beam ! Clean residual mean=-0.000008 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.417346 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 0.417346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108515Jy sigma=0.000659 ! Fit after self-cal, rms=0.108528Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108528Jy sigma=0.000659 ! Fit after self-cal, rms=0.108413Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.025 mas, bmaj=7.831 mas, bpa=12.83 degrees ! Estimated noise=1616.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000927864 Jy ! Component: 100 - total flux cleaned = -0.00136324 Jy ! Component: 150 - total flux cleaned = -0.00175518 Jy ! Component: 200 - total flux cleaned = -0.00217937 Jy ! Total flux subtracted in 200 components = -0.00217937 Jy ! Clean residual min=-0.003653 max=0.003846 Jy/beam ! Clean residual mean=-0.000007 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.415167 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 0.415167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108292Jy sigma=0.000658 ! Fit after self-cal, rms=0.108297Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000680837 Jy ! Component: 100 - total flux cleaned = -0.00100482 Jy ! Component: 150 - total flux cleaned = -0.00125656 Jy ! Component: 200 - total flux cleaned = -0.00153936 Jy ! Total flux subtracted in 200 components = -0.00153936 Jy ! Clean residual min=-0.003652 max=0.003826 Jy/beam ! Clean residual mean=-0.000008 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.413627 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 91 components and 0.413627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108227Jy sigma=0.000657 ! Fit after self-cal, rms=0.108229Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108229Jy sigma=0.000657 ! Fit after self-cal, rms=0.108111Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.831 mas, bmaj=10.34 mas, bpa=6.897 degrees ! Estimated noise=1820.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170256 Jy ! Component: 100 - total flux cleaned = -0.00254205 Jy ! Component: 150 - total flux cleaned = -0.00299779 Jy ! Component: 200 - total flux cleaned = -0.00333725 Jy ! Total flux subtracted in 200 components = -0.00333725 Jy ! Clean residual min=-0.003303 max=0.003779 Jy/beam ! Clean residual mean=-0.000013 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.41029 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 105 components and 0.41029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108076Jy sigma=0.000657 ! Fit after self-cal, rms=0.108078Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164166 Jy ! Component: 100 - total flux cleaned = -0.00052116 Jy ! Component: 150 - total flux cleaned = -0.000677676 Jy ! Component: 200 - total flux cleaned = -0.000739001 Jy ! Total flux subtracted in 200 components = -0.000739001 Jy ! Clean residual min=-0.003268 max=0.003769 Jy/beam ! Clean residual mean=-0.000013 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.409551 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 0.409551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108068Jy sigma=0.000657 ! Fit after self-cal, rms=0.108070Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.03 mas, bmaj=7.839 mas, bpa=12.81 degrees ! Estimated noise=1614.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.03 x 7.839 at 12.81 degrees (North through East) ! Clean map min=-0.0035473 max=0.38439 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=6.794 mas, bpa=11.12 degrees ! Estimated noise=1970.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.298206 Jy ! Component: 100 - total flux cleaned = 0.364197 Jy ! Component: 150 - total flux cleaned = 0.385223 Jy ! Component: 200 - total flux cleaned = 0.394968 Jy ! Total flux subtracted in 200 components = 0.394968 Jy ! Clean residual min=-0.005285 max=0.006035 Jy/beam ! Clean residual mean=-0.000008 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.394968 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.394968 Jy ! Inverting map and beam ! Estimated beam: bmin=4.03 mas, bmaj=7.839 mas, bpa=12.81 degrees ! Estimated noise=1614.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654797 Jy ! Component: 100 - total flux cleaned = 0.00860851 Jy ! Component: 150 - total flux cleaned = 0.0097199 Jy ! Component: 200 - total flux cleaned = 0.0106088 Jy ! Total flux subtracted in 200 components = 0.0106088 Jy ! Clean residual min=-0.003770 max=0.003982 Jy/beam ! Clean residual mean=-0.000010 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.405576 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 44 components and 0.405576 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.831 mas, bmaj=10.34 mas, bpa=6.897 degrees ! Estimated noise=1820.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305276 Jy ! Component: 100 - total flux cleaned = 0.00289733 Jy ! Component: 150 - total flux cleaned = 0.00283624 Jy ! Component: 200 - total flux cleaned = 0.00283539 Jy ! Total flux subtracted in 200 components = 0.00283539 Jy ! Clean residual min=-0.003494 max=0.003758 Jy/beam ! Clean residual mean=-0.000014 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.408412 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.6765e-05 Jy ! Component: 100 - total flux cleaned = 8.96682e-05 Jy ! Component: 150 - total flux cleaned = 0.000129135 Jy ! Component: 200 - total flux cleaned = 0.000163601 Jy ! Total flux subtracted in 200 components = 0.000163601 Jy ! Clean residual min=-0.003426 max=0.003748 Jy/beam ! Clean residual mean=-0.000013 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.408575 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 72 components and 0.408575 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.03 mas, bmaj=7.839 mas, bpa=12.81 degrees ! Estimated noise=1614.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183591 Jy ! Component: 100 - total flux cleaned = -0.000188304 Jy ! Component: 150 - total flux cleaned = -0.000121236 Jy ! Component: 200 - total flux cleaned = 6.17148e-05 Jy ! Total flux subtracted in 200 components = 6.17148e-05 Jy ! Clean residual min=-0.003727 max=0.003929 Jy/beam ! Clean residual mean=-0.000008 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.408637 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.408637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108191Jy sigma=0.000658 ! Fit after self-cal, rms=0.108177Jy sigma=0.000658 wmodel J1848+3219_S_2017_03_23_pus_map.mod ! Writing 90 model components to file: J1848+3219_S_2017_03_23_pus_map.mod wobs J1848+3219_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1848+3219_S_2017_03_23_pus_uvs.fits wwins J1848+3219_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J1848+3219_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374074 Jy ! Component: 100 - total flux cleaned = 0.0005674 Jy ! Component: 150 - total flux cleaned = 0.000629082 Jy ! Component: 200 - total flux cleaned = 0.000400201 Jy ! Component: 250 - total flux cleaned = 0.000233161 Jy ! Component: 300 - total flux cleaned = 7.158e-05 Jy ! Component: 350 - total flux cleaned = -0.000295816 Jy ! Component: 400 - total flux cleaned = -0.000655099 Jy ! Component: 450 - total flux cleaned = -0.00100613 Jy ! Component: 500 - total flux cleaned = -0.00120292 Jy ! Component: 550 - total flux cleaned = -0.00139472 Jy ! Component: 600 - total flux cleaned = -0.00144116 Jy ! Component: 650 - total flux cleaned = -0.00148757 Jy ! Component: 700 - total flux cleaned = -0.00167174 Jy ! Component: 750 - total flux cleaned = -0.0018066 Jy ! Component: 800 - total flux cleaned = -0.00189479 Jy ! Component: 850 - total flux cleaned = -0.00185065 Jy ! Component: 900 - total flux cleaned = -0.00198178 Jy ! Component: 950 - total flux cleaned = -0.0020678 Jy ! Component: 1000 - total flux cleaned = -0.00219542 Jy ! Component: 1050 - total flux cleaned = -0.00244547 Jy ! Component: 1100 - total flux cleaned = -0.00248571 Jy ! Component: 1150 - total flux cleaned = -0.00244574 Jy ! Component: 1200 - total flux cleaned = -0.00272842 Jy ! Component: 1250 - total flux cleaned = -0.00264876 Jy ! Component: 1300 - total flux cleaned = -0.00276681 Jy ! Component: 1350 - total flux cleaned = -0.00284528 Jy ! Component: 1400 - total flux cleaned = -0.00315372 Jy ! Component: 1450 - total flux cleaned = -0.00330604 Jy ! Component: 1500 - total flux cleaned = -0.0035328 Jy ! Component: 1550 - total flux cleaned = -0.00357087 Jy ! Component: 1600 - total flux cleaned = -0.00386749 Jy ! Component: 1650 - total flux cleaned = -0.00397806 Jy ! Component: 1700 - total flux cleaned = -0.00415962 Jy ! Component: 1750 - total flux cleaned = -0.00444754 Jy ! Component: 1800 - total flux cleaned = -0.00458969 Jy ! Component: 1850 - total flux cleaned = -0.00469566 Jy ! Component: 1900 - total flux cleaned = -0.00480067 Jy ! Component: 1950 - total flux cleaned = -0.00487041 Jy ! Component: 2000 - total flux cleaned = -0.00497412 Jy ! Component: 2050 - total flux cleaned = -0.0051447 Jy ! Component: 2100 - total flux cleaned = -0.00507706 Jy ! Component: 2150 - total flux cleaned = -0.00521156 Jy ! Component: 2200 - total flux cleaned = -0.00521161 Jy ! Component: 2250 - total flux cleaned = -0.00524499 Jy ! Component: 2300 - total flux cleaned = -0.00531129 Jy ! Component: 2350 - total flux cleaned = -0.00550705 Jy ! Component: 2400 - total flux cleaned = -0.00547475 Jy ! Component: 2450 - total flux cleaned = -0.0056355 Jy ! Component: 2500 - total flux cleaned = -0.00566734 Jy ! Component: 2550 - total flux cleaned = -0.00579401 Jy ! Component: 2600 - total flux cleaned = -0.00595043 Jy ! Component: 2650 - total flux cleaned = -0.0058571 Jy ! Component: 2700 - total flux cleaned = -0.00604286 Jy ! Component: 2750 - total flux cleaned = -0.00607351 Jy ! Component: 2800 - total flux cleaned = -0.00613453 Jy ! Component: 2850 - total flux cleaned = -0.0059829 Jy ! Component: 2900 - total flux cleaned = -0.00604295 Jy ! Component: 2950 - total flux cleaned = -0.00595292 Jy ! Component: 3000 - total flux cleaned = -0.00601238 Jy ! Component: 3050 - total flux cleaned = -0.00598266 Jy ! Component: 3100 - total flux cleaned = -0.00601221 Jy ! Component: 3150 - total flux cleaned = -0.00598327 Jy ! Component: 3200 - total flux cleaned = -0.00598358 Jy ! Component: 3250 - total flux cleaned = -0.00609899 Jy ! Component: 3300 - total flux cleaned = -0.00607024 Jy ! Component: 3350 - total flux cleaned = -0.00621208 Jy ! Component: 3400 - total flux cleaned = -0.0061272 Jy ! Component: 3450 - total flux cleaned = -0.00601522 Jy ! Component: 3500 - total flux cleaned = -0.00607112 Jy ! Component: 3550 - total flux cleaned = -0.00607104 Jy ! Component: 3600 - total flux cleaned = -0.00618151 Jy ! Component: 3650 - total flux cleaned = -0.00620876 Jy ! Component: 3700 - total flux cleaned = -0.00623587 Jy ! Component: 3750 - total flux cleaned = -0.00628999 Jy ! Component: 3800 - total flux cleaned = -0.00610108 Jy ! Component: 3850 - total flux cleaned = -0.00634275 Jy ! Component: 3900 - total flux cleaned = -0.00644955 Jy ! Component: 3950 - total flux cleaned = -0.00647599 Jy ! Component: 4000 - total flux cleaned = -0.00634417 Jy ! Component: 4050 - total flux cleaned = -0.00644916 Jy ! Total flux subtracted in 4096 components = -0.00655381 Jy ! Clean residual min=-0.001608 max=0.001355 Jy/beam ! Clean residual mean=-0.000001 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.402083 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 379 components and 0.402083 Jy ![Exited script file: muppet] wmap "J1848+3219_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.03 x 7.839 at 12.81 degrees (North through East) ! Clean map min=-0.0036423 max=0.3846 Jy/beam ! Writing clean map to FITS file: J1848+3219_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.384604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000489347 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.381702 0.381702 0.763405 1.52681 3.05362 6.10724 12.2145 24.429 48.8579 97.7158 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.384 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.03 x 7.839 at 12.81 degrees (North through East) ! Clean map min=-0.0036423 max=0.3846 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1848+3219_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:07:15 2019