! Started logfile: J1846-0003_S_2017_10_09_pus_uvs.log on Sun May 12 13:18:05 2019 obs J1846-0003_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1846-0003_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1846-0003 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 10512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1846-0003_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 515 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 455 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 912 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968842Jy sigma=0.008104 ! Fit after self-cal, rms=0.938323Jy sigma=0.007853 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.106 mas, bmaj=14.78 mas, bpa=-15.07 degrees ! Estimated noise=1306.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442605 Jy ! Component: 100 - total flux cleaned = 0.0591493 Jy ! Total flux subtracted in 100 components = 0.0591493 Jy ! Clean residual min=-0.005720 max=0.008813 Jy/beam ! Clean residual mean=0.000115 rms=0.002479 Jy/beam ! Combined flux in latest and established models = 0.0591493 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.0591493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083883Jy sigma=0.000670 ! Fit after self-cal, rms=0.083459Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.59 mas, bmaj=20.24 mas, bpa=-17.18 degrees ! Estimated noise=1022.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175436 Jy ! Component: 100 - total flux cleaned = 0.0286874 Jy ! Component: 150 - total flux cleaned = 0.0363178 Jy ! Component: 200 - total flux cleaned = 0.041645 Jy ! Total flux subtracted in 200 components = 0.041645 Jy ! Clean residual min=-0.003825 max=0.004887 Jy/beam ! Clean residual mean=0.000052 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.100794 Jy ! Performing phase self-cal ! Adding 106 model components to the UV plane model. ! The established model now contains 145 components and 0.100794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079139Jy sigma=0.000629 ! Fit after self-cal, rms=0.078778Jy sigma=0.000626 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.98 HN 1.11 KP 1.06 ! LA 0.97 MK 1.00* NL 1.12 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.12 KP 1.02 ! LA 0.91 MK 1.00* NL 1.13 OV 1.00* ! PT 0.89 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.02 KP 0.88 ! LA 0.76 MK 1.00* NL 1.20 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 402 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.078778Jy sigma=0.000626 ! Fit after self-cal, rms=0.079477Jy sigma=0.000626 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.876 mas, bmaj=21.12 mas, bpa=-17.11 degrees ! Estimated noise=1056.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265072 Jy ! Component: 100 - total flux cleaned = 0.00259304 Jy ! Component: 150 - total flux cleaned = 0.00253857 Jy ! Component: 200 - total flux cleaned = 0.00245082 Jy ! Total flux subtracted in 200 components = 0.00245082 Jy ! Clean residual min=-0.003239 max=0.004250 Jy/beam ! Clean residual mean=-0.000000 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.103245 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 160 components and 0.103245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079377Jy sigma=0.000625 ! Fit after self-cal, rms=0.079491Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079491Jy sigma=0.000624 ! Fit after self-cal, rms=0.079066Jy sigma=0.000623 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.849 mas, bmaj=21.28 mas, bpa=-17.33 degrees ! Estimated noise=1042.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015051 Jy ! Component: 100 - total flux cleaned = 0.00156017 Jy ! Component: 150 - total flux cleaned = 0.00152305 Jy ! Component: 200 - total flux cleaned = 0.00152224 Jy ! Total flux subtracted in 200 components = 0.00152224 Jy ! Clean residual min=-0.002518 max=0.003356 Jy/beam ! Clean residual mean=-0.000004 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.104767 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 174 components and 0.104767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079016Jy sigma=0.000622 ! Fit after self-cal, rms=0.079051Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412268 Jy ! Component: 100 - total flux cleaned = 0.000415178 Jy ! Component: 150 - total flux cleaned = 0.00044662 Jy ! Component: 200 - total flux cleaned = 0.000476538 Jy ! Total flux subtracted in 200 components = 0.000476538 Jy ! Clean residual min=-0.002664 max=0.003273 Jy/beam ! Clean residual mean=-0.000004 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.105244 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 179 components and 0.105244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079017Jy sigma=0.000622 ! Fit after self-cal, rms=0.078985Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078985Jy sigma=0.000622 ! Fit after self-cal, rms=0.077570Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.783 mas, bmaj=21.18 mas, bpa=-17.28 degrees ! Estimated noise=1021.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000996416 Jy ! Component: 100 - total flux cleaned = 0.000932535 Jy ! Component: 150 - total flux cleaned = 0.000903982 Jy ! Component: 200 - total flux cleaned = 0.000931078 Jy ! Total flux subtracted in 200 components = 0.000931078 Jy ! Clean residual min=-0.002342 max=0.003036 Jy/beam ! Clean residual mean=-0.000003 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.106175 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 190 components and 0.106175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077541Jy sigma=0.000621 ! Fit after self-cal, rms=0.077513Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310714 Jy ! Component: 100 - total flux cleaned = 0.000251332 Jy ! Component: 150 - total flux cleaned = 0.000250932 Jy ! Component: 200 - total flux cleaned = 0.000274363 Jy ! Total flux subtracted in 200 components = 0.000274363 Jy ! Clean residual min=-0.002428 max=0.003056 Jy/beam ! Clean residual mean=-0.000003 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.106449 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 193 components and 0.106449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077493Jy sigma=0.000621 ! Fit after self-cal, rms=0.077473Jy sigma=0.000621 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077473Jy sigma=0.000621 ! Fit after self-cal, rms=0.076563Jy sigma=0.000621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.055 mas, bmaj=22 mas, bpa=-19.48 degrees ! Estimated noise=1084.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000878355 Jy ! Component: 100 - total flux cleaned = 0.00098081 Jy ! Component: 150 - total flux cleaned = 0.000979432 Jy ! Component: 200 - total flux cleaned = 0.00101831 Jy ! Total flux subtracted in 200 components = 0.00101831 Jy ! Clean residual min=-0.002309 max=0.002971 Jy/beam ! Clean residual mean=-0.000005 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.107468 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 201 components and 0.107468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076556Jy sigma=0.000621 ! Fit after self-cal, rms=0.076541Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211116 Jy ! Component: 100 - total flux cleaned = 0.000232267 Jy ! Component: 150 - total flux cleaned = 0.000273818 Jy ! Component: 200 - total flux cleaned = 0.000292731 Jy ! Total flux subtracted in 200 components = 0.000292731 Jy ! Clean residual min=-0.002277 max=0.002948 Jy/beam ! Clean residual mean=-0.000004 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.10776 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 204 components and 0.10776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076533Jy sigma=0.000620 ! Fit after self-cal, rms=0.076523Jy sigma=0.000620 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.741 mas, bmaj=21.15 mas, bpa=-17.24 degrees ! Estimated noise=1008.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.741 x 21.15 at -17.24 degrees (North through East) ! Clean map min=-0.0021136 max=0.059693 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.348 mas, bmaj=15.3 mas, bpa=-15.22 degrees ! Estimated noise=1318.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423347 Jy ! Component: 100 - total flux cleaned = 0.0604874 Jy ! Component: 150 - total flux cleaned = 0.0726744 Jy ! Component: 200 - total flux cleaned = 0.0813231 Jy ! Total flux subtracted in 200 components = 0.0813231 Jy ! Clean residual min=-0.004539 max=0.005159 Jy/beam ! Clean residual mean=0.000054 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.0813231 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 67 model components to the UV plane model. ! The established model now contains 67 components and 0.0813231 Jy ! Inverting map and beam ! Estimated beam: bmin=5.741 mas, bmaj=21.15 mas, bpa=-17.24 degrees ! Estimated noise=1008.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00875144 Jy ! Component: 100 - total flux cleaned = 0.0143924 Jy ! Component: 150 - total flux cleaned = 0.0181728 Jy ! Component: 200 - total flux cleaned = 0.0207558 Jy ! Total flux subtracted in 200 components = 0.0207558 Jy ! Clean residual min=-0.002770 max=0.002913 Jy/beam ! Clean residual mean=0.000012 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.102079 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 118 components and 0.102079 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.055 mas, bmaj=22 mas, bpa=-19.48 degrees ! Estimated noise=1084.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232873 Jy ! Component: 100 - total flux cleaned = 0.00366589 Jy ! Component: 150 - total flux cleaned = 0.00447142 Jy ! Component: 200 - total flux cleaned = 0.00471878 Jy ! Total flux subtracted in 200 components = 0.00471878 Jy ! Clean residual min=-0.002374 max=0.003003 Jy/beam ! Clean residual mean=0.000000 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.106798 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.02494e-05 Jy ! Component: 100 - total flux cleaned = 0.000155964 Jy ! Component: 150 - total flux cleaned = 0.000228209 Jy ! Component: 200 - total flux cleaned = 0.000280326 Jy ! Total flux subtracted in 200 components = 0.000280326 Jy ! Clean residual min=-0.002334 max=0.002977 Jy/beam ! Clean residual mean=0.000000 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.107078 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 147 components and 0.107078 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.741 mas, bmaj=21.15 mas, bpa=-17.24 degrees ! Estimated noise=1008.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235892 Jy ! Component: 100 - total flux cleaned = -0.000143915 Jy ! Component: 150 - total flux cleaned = -3.8135e-05 Jy ! Component: 200 - total flux cleaned = 2.00606e-05 Jy ! Total flux subtracted in 200 components = 2.00606e-05 Jy ! Clean residual min=-0.002159 max=0.002718 Jy/beam ! Clean residual mean=0.000001 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.107098 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 154 components and 0.107098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076515Jy sigma=0.000620 ! Fit after self-cal, rms=0.076486Jy sigma=0.000620 wmodel J1846-0003_S_2017_10_09_pus_map.mod ! Writing 154 model components to file: J1846-0003_S_2017_10_09_pus_map.mod wobs J1846-0003_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1846-0003_S_2017_10_09_pus_uvs.fits wwins J1846-0003_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1846-0003_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117371 Jy ! Component: 100 - total flux cleaned = 0.00169132 Jy ! Component: 150 - total flux cleaned = 0.00183346 Jy ! Component: 200 - total flux cleaned = 0.00199235 Jy ! Component: 250 - total flux cleaned = 0.00213891 Jy ! Component: 300 - total flux cleaned = 0.00208665 Jy ! Component: 350 - total flux cleaned = 0.00198508 Jy ! Component: 400 - total flux cleaned = 0.00203363 Jy ! Component: 450 - total flux cleaned = 0.00212675 Jy ! Component: 500 - total flux cleaned = 0.00212627 Jy ! Component: 550 - total flux cleaned = 0.00216855 Jy ! Component: 600 - total flux cleaned = 0.00223058 Jy ! Component: 650 - total flux cleaned = 0.00231074 Jy ! Component: 700 - total flux cleaned = 0.00234986 Jy ! Component: 750 - total flux cleaned = 0.00240701 Jy ! Component: 800 - total flux cleaned = 0.00249934 Jy ! Component: 850 - total flux cleaned = 0.00253509 Jy ! Component: 900 - total flux cleaned = 0.00264015 Jy ! Component: 950 - total flux cleaned = 0.00275956 Jy ! Component: 1000 - total flux cleaned = 0.00284265 Jy ! Component: 1050 - total flux cleaned = 0.00292369 Jy ! Component: 1100 - total flux cleaned = 0.00300272 Jy ! Component: 1150 - total flux cleaned = 0.0031107 Jy ! Component: 1200 - total flux cleaned = 0.00323133 Jy ! Component: 1250 - total flux cleaned = 0.00330513 Jy ! Component: 1300 - total flux cleaned = 0.00340606 Jy ! Component: 1350 - total flux cleaned = 0.00343414 Jy ! Component: 1400 - total flux cleaned = 0.00348986 Jy ! Component: 1450 - total flux cleaned = 0.00357127 Jy ! Component: 1500 - total flux cleaned = 0.00363773 Jy ! Component: 1550 - total flux cleaned = 0.00367676 Jy ! Component: 1600 - total flux cleaned = 0.00374072 Jy ! Component: 1650 - total flux cleaned = 0.00379113 Jy ! Component: 1700 - total flux cleaned = 0.00387748 Jy ! Component: 1750 - total flux cleaned = 0.00397437 Jy ! Component: 1800 - total flux cleaned = 0.00403399 Jy ! Component: 1850 - total flux cleaned = 0.00408123 Jy ! Component: 1900 - total flux cleaned = 0.0041738 Jy ! Component: 1950 - total flux cleaned = 0.0042307 Jy ! Component: 2000 - total flux cleaned = 0.0043093 Jy ! Component: 2050 - total flux cleaned = 0.00440877 Jy ! Component: 2100 - total flux cleaned = 0.00446334 Jy ! Component: 2150 - total flux cleaned = 0.00455997 Jy ! Component: 2200 - total flux cleaned = 0.00461282 Jy ! Component: 2250 - total flux cleaned = 0.00466522 Jy ! Component: 2300 - total flux cleaned = 0.00476838 Jy ! Component: 2350 - total flux cleaned = 0.00485991 Jy ! Component: 2400 - total flux cleaned = 0.00493031 Jy ! Component: 2450 - total flux cleaned = 0.00502991 Jy ! Component: 2500 - total flux cleaned = 0.00511866 Jy ! Component: 2550 - total flux cleaned = 0.0051967 Jy ! Component: 2600 - total flux cleaned = 0.00529347 Jy ! Component: 2650 - total flux cleaned = 0.00537019 Jy ! Component: 2700 - total flux cleaned = 0.00542717 Jy ! Component: 2750 - total flux cleaned = 0.0055306 Jy ! Component: 2800 - total flux cleaned = 0.00557728 Jy ! Component: 2850 - total flux cleaned = 0.00564202 Jy ! Component: 2900 - total flux cleaned = 0.00573374 Jy ! Component: 2950 - total flux cleaned = 0.00577005 Jy ! Component: 3000 - total flux cleaned = 0.00583325 Jy ! Component: 3050 - total flux cleaned = 0.00588683 Jy ! Component: 3100 - total flux cleaned = 0.00594 Jy ! Component: 3150 - total flux cleaned = 0.00600146 Jy ! Component: 3200 - total flux cleaned = 0.00604502 Jy ! Component: 3250 - total flux cleaned = 0.00609689 Jy ! Component: 3300 - total flux cleaned = 0.00613117 Jy ! Component: 3350 - total flux cleaned = 0.00617386 Jy ! Component: 3400 - total flux cleaned = 0.00624993 Jy ! Component: 3450 - total flux cleaned = 0.00630026 Jy ! Component: 3500 - total flux cleaned = 0.00634191 Jy ! Component: 3550 - total flux cleaned = 0.00636672 Jy ! Component: 3600 - total flux cleaned = 0.00641616 Jy ! Component: 3650 - total flux cleaned = 0.00642435 Jy ! Component: 3700 - total flux cleaned = 0.00648122 Jy ! Component: 3750 - total flux cleaned = 0.00650539 Jy ! Component: 3800 - total flux cleaned = 0.00654561 Jy ! Component: 3850 - total flux cleaned = 0.0065776 Jy ! Component: 3900 - total flux cleaned = 0.00661738 Jy ! Component: 3950 - total flux cleaned = 0.0066253 Jy ! Component: 4000 - total flux cleaned = 0.0066569 Jy ! Component: 4050 - total flux cleaned = 0.00671196 Jy ! Total flux subtracted in 4096 components = 0.00672768 Jy ! Clean residual min=-0.000471 max=0.000523 Jy/beam ! Clean residual mean=0.000002 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.113826 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 409 components and 0.113826 Jy ![Exited script file: muppet] wmap "J1846-0003_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.741 x 21.15 at -17.24 degrees (North through East) ! Clean map min=-0.0014984 max=0.0593 Jy/beam ! Writing clean map to FITS file: J1846-0003_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0592999 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153846 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.778314 0.778314 1.55663 3.11325 6.22651 12.453 24.906 49.8121 99.6242 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.741 x 21.15 at -17.24 degrees (North through East) ! Clean map min=-0.0014984 max=0.0593 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1846-0003_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:10 2019