! Started logfile: J1846+2036_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:55:11 2019 obs J1846+2036_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1846+2036_S_2017_05_31_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.963618 visibilities/baseline/integration-bin. ! Found source: J1846+2036 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 19600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1846+2036_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 548 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.907095Jy sigma=0.008873 ! Fit after self-cal, rms=0.901986Jy sigma=0.008831 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=6.31 mas, bpa=-5.902 degrees ! Estimated noise=1023.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0764758 Jy ! Component: 100 - total flux cleaned = 0.0932466 Jy ! Total flux subtracted in 100 components = 0.0932466 Jy ! Clean residual min=-0.003474 max=0.005082 Jy/beam ! Clean residual mean=-0.000008 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.0932466 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0932466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124368Jy sigma=0.000671 ! Fit after self-cal, rms=0.124365Jy sigma=0.000671 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=7.307 mas, bpa=-5.819 degrees ! Estimated noise=591.799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444085 Jy ! Component: 100 - total flux cleaned = 0.00623179 Jy ! Component: 150 - total flux cleaned = 0.00628523 Jy ! Component: 200 - total flux cleaned = 0.00618684 Jy ! Total flux subtracted in 200 components = 0.00618684 Jy ! Clean residual min=-0.001811 max=0.002026 Jy/beam ! Clean residual mean=0.000000 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0994334 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.0994334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123842Jy sigma=0.000669 ! Fit after self-cal, rms=0.123847Jy sigma=0.000669 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.93 HN 0.93 KP 1.03 ! LA 1.01 MK 1.03 NL 0.92 OV 1.01 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 0.98 HN 1.00 KP 0.99 ! LA 1.02 MK 1.03 NL 1.04 OV 1.04 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.04 HN 1.01 KP 0.99 ! LA 1.00 MK 1.03 NL 1.02 OV 0.96 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.97 KP 0.81 ! LA 1.04 MK 1.13 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.123847Jy sigma=0.000669 ! Fit after self-cal, rms=0.105600Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=7.314 mas, bpa=-5.757 degrees ! Estimated noise=597.115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000902881 Jy ! Component: 100 - total flux cleaned = 0.000845542 Jy ! Component: 150 - total flux cleaned = 0.000751194 Jy ! Component: 200 - total flux cleaned = 0.000688209 Jy ! Total flux subtracted in 200 components = 0.000688209 Jy ! Clean residual min=-0.001872 max=0.001967 Jy/beam ! Clean residual mean=0.000002 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.100122 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.100122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105492Jy sigma=0.000664 ! Fit after self-cal, rms=0.105483Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105483Jy sigma=0.000664 ! Fit after self-cal, rms=0.081660Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=7.34 mas, bpa=-6 degrees ! Estimated noise=600.811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286225 Jy ! Component: 100 - total flux cleaned = 0.000175577 Jy ! Component: 150 - total flux cleaned = 8.70138e-05 Jy ! Component: 200 - total flux cleaned = 2.66925e-05 Jy ! Total flux subtracted in 200 components = 2.66925e-05 Jy ! Clean residual min=-0.001686 max=0.001603 Jy/beam ! Clean residual mean=0.000001 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.100148 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.100148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081623Jy sigma=0.000659 ! Fit after self-cal, rms=0.081614Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3961e-05 Jy ! Component: 100 - total flux cleaned = -1.85289e-05 Jy ! Component: 150 - total flux cleaned = -6.92118e-05 Jy ! Component: 200 - total flux cleaned = -0.00011515 Jy ! Total flux subtracted in 200 components = -0.00011515 Jy ! Clean residual min=-0.001675 max=0.001598 Jy/beam ! Clean residual mean=0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.100033 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.100033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081601Jy sigma=0.000659 ! Fit after self-cal, rms=0.081601Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081601Jy sigma=0.000659 ! Fit after self-cal, rms=0.076350Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=7.344 mas, bpa=-5.977 degrees ! Estimated noise=602.254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.09292e-07 Jy ! Component: 100 - total flux cleaned = -2.89801e-05 Jy ! Component: 150 - total flux cleaned = -5.44447e-05 Jy ! Component: 200 - total flux cleaned = -8.85308e-05 Jy ! Total flux subtracted in 200 components = -8.85308e-05 Jy ! Clean residual min=-0.001465 max=0.001446 Jy/beam ! Clean residual mean=0.000001 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0999447 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.0999447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076344Jy sigma=0.000658 ! Fit after self-cal, rms=0.076334Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.97534e-05 Jy ! Component: 100 - total flux cleaned = -4.16846e-05 Jy ! Component: 150 - total flux cleaned = -4.16868e-05 Jy ! Component: 200 - total flux cleaned = -5.1446e-05 Jy ! Total flux subtracted in 200 components = -5.1446e-05 Jy ! Clean residual min=-0.001458 max=0.001429 Jy/beam ! Clean residual mean=0.000001 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0998932 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.0998932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076330Jy sigma=0.000658 ! Fit after self-cal, rms=0.076331Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076331Jy sigma=0.000658 ! Fit after self-cal, rms=0.076492Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.5 mas, bmaj=10.8 mas, bpa=-6.952 degrees ! Estimated noise=730.281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.0276e-05 Jy ! Component: 100 - total flux cleaned = -3.39505e-06 Jy ! Component: 150 - total flux cleaned = -4.02959e-05 Jy ! Component: 200 - total flux cleaned = -6.30239e-05 Jy ! Total flux subtracted in 200 components = -6.30239e-05 Jy ! Clean residual min=-0.001521 max=0.001615 Jy/beam ! Clean residual mean=0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0998302 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.0998302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076493Jy sigma=0.000658 ! Fit after self-cal, rms=0.076493Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.72305e-06 Jy ! Component: 100 - total flux cleaned = -3.24627e-06 Jy ! Component: 150 - total flux cleaned = -2.29442e-05 Jy ! Component: 200 - total flux cleaned = -4.5789e-05 Jy ! Total flux subtracted in 200 components = -4.5789e-05 Jy ! Clean residual min=-0.001529 max=0.001617 Jy/beam ! Clean residual mean=0.000002 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0997844 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.0997844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076494Jy sigma=0.000658 ! Fit after self-cal, rms=0.076493Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=7.343 mas, bpa=-5.949 degrees ! Estimated noise=603.644 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 7.343 at -5.949 degrees (North through East) ! Clean map min=-0.0014158 max=0.099518 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=6.311 mas, bpa=-5.724 degrees ! Estimated noise=1039.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0776029 Jy ! Component: 100 - total flux cleaned = 0.0946594 Jy ! Component: 150 - total flux cleaned = 0.0989938 Jy ! Component: 200 - total flux cleaned = 0.100171 Jy ! Total flux subtracted in 200 components = 0.100171 Jy ! Clean residual min=-0.002917 max=0.002793 Jy/beam ! Clean residual mean=-0.000001 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.100171 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.100171 Jy ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=7.343 mas, bpa=-5.949 degrees ! Estimated noise=603.644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.82648e-05 Jy ! Component: 100 - total flux cleaned = 8.80515e-06 Jy ! Component: 150 - total flux cleaned = 3.73743e-05 Jy ! Component: 200 - total flux cleaned = -1.46443e-05 Jy ! Total flux subtracted in 200 components = -1.46443e-05 Jy ! Clean residual min=-0.001552 max=0.001457 Jy/beam ! Clean residual mean=0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.100157 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.100157 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.5 mas, bmaj=10.8 mas, bpa=-6.952 degrees ! Estimated noise=730.281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.81843e-05 Jy ! Component: 100 - total flux cleaned = -3.33057e-05 Jy ! Component: 150 - total flux cleaned = -0.000101727 Jy ! Component: 200 - total flux cleaned = -0.000158924 Jy ! Total flux subtracted in 200 components = -0.000158924 Jy ! Clean residual min=-0.001517 max=0.001642 Jy/beam ! Clean residual mean=0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0999979 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.82355e-05 Jy ! Component: 100 - total flux cleaned = -8.89675e-05 Jy ! Component: 150 - total flux cleaned = -0.000115361 Jy ! Component: 200 - total flux cleaned = -0.00014562 Jy ! Total flux subtracted in 200 components = -0.00014562 Jy ! Clean residual min=-0.001530 max=0.001627 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0998523 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 34 components and 0.0998522 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=7.343 mas, bpa=-5.949 degrees ! Estimated noise=603.644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.58479e-05 Jy ! Component: 100 - total flux cleaned = -1.55171e-05 Jy ! Component: 150 - total flux cleaned = 1.98018e-05 Jy ! Component: 200 - total flux cleaned = 2.03172e-05 Jy ! Total flux subtracted in 200 components = 2.03172e-05 Jy ! Clean residual min=-0.001464 max=0.001392 Jy/beam ! Clean residual mean=0.000001 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0998726 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.0998726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076499Jy sigma=0.000658 ! Fit after self-cal, rms=0.076496Jy sigma=0.000658 wmodel J1846+2036_S_2017_05_31_pus_map.mod ! Writing 45 model components to file: J1846+2036_S_2017_05_31_pus_map.mod wobs J1846+2036_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1846+2036_S_2017_05_31_pus_uvs.fits wwins J1846+2036_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1846+2036_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274629 Jy ! Component: 100 - total flux cleaned = -0.000400639 Jy ! Component: 150 - total flux cleaned = -0.00057141 Jy ! Component: 200 - total flux cleaned = -0.000689753 Jy ! Component: 250 - total flux cleaned = -0.000805176 Jy ! Component: 300 - total flux cleaned = -0.000962199 Jy ! Component: 350 - total flux cleaned = -0.00102814 Jy ! Component: 400 - total flux cleaned = -0.00107137 Jy ! Component: 450 - total flux cleaned = -0.00117581 Jy ! Component: 500 - total flux cleaned = -0.00115571 Jy ! Component: 550 - total flux cleaned = -0.001237 Jy ! Component: 600 - total flux cleaned = -0.00131649 Jy ! Component: 650 - total flux cleaned = -0.00135546 Jy ! Component: 700 - total flux cleaned = -0.00135568 Jy ! Component: 750 - total flux cleaned = -0.0014312 Jy ! Component: 800 - total flux cleaned = -0.00146839 Jy ! Component: 850 - total flux cleaned = -0.00150507 Jy ! Component: 900 - total flux cleaned = -0.00157763 Jy ! Component: 950 - total flux cleaned = -0.00155966 Jy ! Component: 1000 - total flux cleaned = -0.00170078 Jy ! Component: 1050 - total flux cleaned = -0.00175302 Jy ! Component: 1100 - total flux cleaned = -0.0018388 Jy ! Component: 1150 - total flux cleaned = -0.00194112 Jy ! Component: 1200 - total flux cleaned = -0.00192449 Jy ! Component: 1250 - total flux cleaned = -0.00204109 Jy ! Component: 1300 - total flux cleaned = -0.00209021 Jy ! Component: 1350 - total flux cleaned = -0.00218814 Jy ! Component: 1400 - total flux cleaned = -0.00222041 Jy ! Component: 1450 - total flux cleaned = -0.00233182 Jy ! Component: 1500 - total flux cleaned = -0.00236339 Jy ! Component: 1550 - total flux cleaned = -0.00242583 Jy ! Component: 1600 - total flux cleaned = -0.0024724 Jy ! Component: 1650 - total flux cleaned = -0.00251861 Jy ! Component: 1700 - total flux cleaned = -0.00259437 Jy ! Component: 1750 - total flux cleaned = -0.00266962 Jy ! Component: 1800 - total flux cleaned = -0.0027143 Jy ! Component: 1850 - total flux cleaned = -0.00280252 Jy ! Component: 1900 - total flux cleaned = -0.00280254 Jy ! Component: 1950 - total flux cleaned = -0.00281705 Jy ! Component: 2000 - total flux cleaned = -0.00290328 Jy ! Component: 2050 - total flux cleaned = -0.00293163 Jy ! Component: 2100 - total flux cleaned = -0.0029176 Jy ! Component: 2150 - total flux cleaned = -0.00301539 Jy ! Component: 2200 - total flux cleaned = -0.00304277 Jy ! Component: 2250 - total flux cleaned = -0.00306992 Jy ! Component: 2300 - total flux cleaned = -0.00311069 Jy ! Component: 2350 - total flux cleaned = -0.00317784 Jy ! Component: 2400 - total flux cleaned = -0.00311082 Jy ! Component: 2450 - total flux cleaned = -0.00315057 Jy ! Component: 2500 - total flux cleaned = -0.00317691 Jy ! Component: 2550 - total flux cleaned = -0.00322902 Jy ! Component: 2600 - total flux cleaned = -0.00324185 Jy ! Component: 2650 - total flux cleaned = -0.00322895 Jy ! Component: 2700 - total flux cleaned = -0.00324172 Jy ! Component: 2750 - total flux cleaned = -0.00321634 Jy ! Component: 2800 - total flux cleaned = -0.00320384 Jy ! Component: 2850 - total flux cleaned = -0.00326624 Jy ! Component: 2900 - total flux cleaned = -0.00322919 Jy ! Component: 2950 - total flux cleaned = -0.00322913 Jy ! Component: 3000 - total flux cleaned = -0.00326563 Jy ! Component: 3050 - total flux cleaned = -0.00320495 Jy ! Component: 3100 - total flux cleaned = -0.00320491 Jy ! Component: 3150 - total flux cleaned = -0.00318112 Jy ! Component: 3200 - total flux cleaned = -0.00314559 Jy ! Component: 3250 - total flux cleaned = -0.00314572 Jy ! Component: 3300 - total flux cleaned = -0.00313394 Jy ! Component: 3350 - total flux cleaned = -0.00320369 Jy ! Component: 3400 - total flux cleaned = -0.0030997 Jy ! Component: 3450 - total flux cleaned = -0.00318011 Jy ! Component: 3500 - total flux cleaned = -0.00321433 Jy ! Component: 3550 - total flux cleaned = -0.00320309 Jy ! Component: 3600 - total flux cleaned = -0.00325955 Jy ! Component: 3650 - total flux cleaned = -0.00329327 Jy ! Component: 3700 - total flux cleaned = -0.00324877 Jy ! Component: 3750 - total flux cleaned = -0.00327091 Jy ! Component: 3800 - total flux cleaned = -0.00328189 Jy ! Component: 3850 - total flux cleaned = -0.00331478 Jy ! Component: 3900 - total flux cleaned = -0.00332569 Jy ! Component: 3950 - total flux cleaned = -0.00332579 Jy ! Component: 4000 - total flux cleaned = -0.003315 Jy ! Component: 4050 - total flux cleaned = -0.00335778 Jy ! Total flux subtracted in 4096 components = -0.00333644 Jy ! Clean residual min=-0.000623 max=0.000626 Jy/beam ! Clean residual mean=-0.000001 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.0965361 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 360 components and 0.0965361 Jy ![Exited script file: muppet] wmap "J1846+2036_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 7.343 at -5.949 degrees (North through East) ! Clean map min=-0.0012413 max=0.099613 Jy/beam ! Writing clean map to FITS file: J1846+2036_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0996125 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019779 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.595678 0.595678 1.19136 2.38271 4.76542 9.53085 19.0617 38.1234 76.2468 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 7.343 at -5.949 degrees (North through East) ! Clean map min=-0.0012413 max=0.099613 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1846+2036_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:55:16 2019