! Started logfile: J1845-2200_S_2017_07_16_pus_uvs.log on Thu May 9 11:16:00 2019 obs J1845-2200_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1845-2200_S_2017_07_16_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.34213 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1845-2200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 5912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1845-2200_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 382 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 402 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 382 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 960 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955564Jy sigma=0.007268 ! Fit after self-cal, rms=0.927715Jy sigma=0.007069 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.477 mas, bmaj=7.507 mas, bpa=4.081 degrees ! Estimated noise=1736.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.055626 Jy ! Component: 100 - total flux cleaned = 0.0700739 Jy ! Total flux subtracted in 100 components = 0.0700739 Jy ! Clean residual min=-0.005536 max=0.006626 Jy/beam ! Clean residual mean=-0.000024 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.0700739 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0700739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087231Jy sigma=0.000643 ! Fit after self-cal, rms=0.087059Jy sigma=0.000642 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=8.833 mas, bpa=-1.588 degrees ! Estimated noise=1419.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102934 Jy ! Component: 100 - total flux cleaned = 0.0150417 Jy ! Component: 150 - total flux cleaned = 0.0173591 Jy ! Component: 200 - total flux cleaned = 0.018527 Jy ! Total flux subtracted in 200 components = 0.018527 Jy ! Clean residual min=-0.003602 max=0.003492 Jy/beam ! Clean residual mean=0.000005 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.0886009 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 52 components and 0.0886009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085945Jy sigma=0.000633 ! Fit after self-cal, rms=0.085833Jy sigma=0.000632 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.04 KP 1.06 ! LA 1.02 MK 1.18 NL 0.92 OV 0.94 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.28 KP 1.00 ! LA 0.93 MK 0.96 NL 1.00 OV 1.07 ! PT 1.06 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.03 ! LA 0.96 MK 0.99 NL 0.92 OV 0.94 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.085833Jy sigma=0.000632 ! Fit after self-cal, rms=0.085647Jy sigma=0.000631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=8.878 mas, bpa=-1.432 degrees ! Estimated noise=1413.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244571 Jy ! Component: 100 - total flux cleaned = 0.000287161 Jy ! Component: 150 - total flux cleaned = 0.000287506 Jy ! Component: 200 - total flux cleaned = 0.000286343 Jy ! Total flux subtracted in 200 components = 0.000286343 Jy ! Clean residual min=-0.003391 max=0.003448 Jy/beam ! Clean residual mean=0.000002 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.0888873 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.0888873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085637Jy sigma=0.000630 ! Fit after self-cal, rms=0.085721Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085721Jy sigma=0.000630 ! Fit after self-cal, rms=0.086919Jy sigma=0.000629 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=8.897 mas, bpa=-1.404 degrees ! Estimated noise=1421.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613399 Jy ! Component: 100 - total flux cleaned = 0.00068597 Jy ! Component: 150 - total flux cleaned = 0.000735638 Jy ! Component: 200 - total flux cleaned = 0.000781423 Jy ! Total flux subtracted in 200 components = 0.000781423 Jy ! Clean residual min=-0.003133 max=0.003041 Jy/beam ! Clean residual mean=0.000003 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0896687 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.0896687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086911Jy sigma=0.000629 ! Fit after self-cal, rms=0.087011Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.29054e-05 Jy ! Component: 100 - total flux cleaned = 5.95522e-05 Jy ! Component: 150 - total flux cleaned = 7.35648e-05 Jy ! Component: 200 - total flux cleaned = 8.73913e-05 Jy ! Total flux subtracted in 200 components = 8.73913e-05 Jy ! Clean residual min=-0.003098 max=0.003007 Jy/beam ! Clean residual mean=0.000002 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0897561 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.0897561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087006Jy sigma=0.000629 ! Fit after self-cal, rms=0.087009Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087009Jy sigma=0.000629 ! Fit after self-cal, rms=0.087359Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=8.894 mas, bpa=-1.36 degrees ! Estimated noise=1421.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192618 Jy ! Component: 100 - total flux cleaned = 0.000224404 Jy ! Component: 150 - total flux cleaned = 0.000253579 Jy ! Component: 200 - total flux cleaned = 0.000267069 Jy ! Total flux subtracted in 200 components = 0.000267069 Jy ! Clean residual min=-0.003312 max=0.002925 Jy/beam ! Clean residual mean=-0.000000 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0900231 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.0900231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087354Jy sigma=0.000628 ! Fit after self-cal, rms=0.087399Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.24302e-05 Jy ! Component: 100 - total flux cleaned = 2.64774e-05 Jy ! Component: 150 - total flux cleaned = 3.98445e-05 Jy ! Component: 200 - total flux cleaned = 5.25092e-05 Jy ! Total flux subtracted in 200 components = 5.25092e-05 Jy ! Clean residual min=-0.003283 max=0.002916 Jy/beam ! Clean residual mean=-0.000000 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0900756 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.0900756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087395Jy sigma=0.000628 ! Fit after self-cal, rms=0.087397Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087397Jy sigma=0.000628 ! Fit after self-cal, rms=0.087385Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.329 mas, bmaj=21.32 mas, bpa=-4.607 degrees ! Estimated noise=1823.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130862 Jy ! Component: 100 - total flux cleaned = 0.00013271 Jy ! Component: 150 - total flux cleaned = 0.000148438 Jy ! Component: 200 - total flux cleaned = 0.000160915 Jy ! Total flux subtracted in 200 components = 0.000160915 Jy ! Clean residual min=-0.002196 max=0.002694 Jy/beam ! Clean residual mean=-0.000002 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0902365 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.0902365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087388Jy sigma=0.000628 ! Fit after self-cal, rms=0.087395Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.76071e-05 Jy ! Component: 100 - total flux cleaned = -9.84311e-05 Jy ! Component: 150 - total flux cleaned = -8.42472e-05 Jy ! Component: 200 - total flux cleaned = -7.19082e-05 Jy ! Total flux subtracted in 200 components = -7.19082e-05 Jy ! Clean residual min=-0.002172 max=0.002699 Jy/beam ! Clean residual mean=-0.000002 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.0901646 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 74 components and 0.0901646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087396Jy sigma=0.000628 ! Fit after self-cal, rms=0.087396Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=8.879 mas, bpa=-1.335 degrees ! Estimated noise=1421.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 8.879 at -1.335 degrees (North through East) ! Clean map min=-0.0031037 max=0.074129 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.486 mas, bmaj=7.552 mas, bpa=4.336 degrees ! Estimated noise=1734.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.05464 Jy ! Component: 100 - total flux cleaned = 0.0702141 Jy ! Component: 150 - total flux cleaned = 0.0780529 Jy ! Component: 200 - total flux cleaned = 0.0825543 Jy ! Total flux subtracted in 200 components = 0.0825543 Jy ! Clean residual min=-0.004235 max=0.003794 Jy/beam ! Clean residual mean=-0.000011 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.0825543 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0825543 Jy ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=8.879 mas, bpa=-1.335 degrees ! Estimated noise=1421.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438389 Jy ! Component: 100 - total flux cleaned = 0.00675361 Jy ! Component: 150 - total flux cleaned = 0.00749186 Jy ! Component: 200 - total flux cleaned = 0.00785997 Jy ! Total flux subtracted in 200 components = 0.00785997 Jy ! Clean residual min=-0.003490 max=0.002749 Jy/beam ! Clean residual mean=-0.000000 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.0904142 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 52 components and 0.0904142 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.329 mas, bmaj=21.32 mas, bpa=-4.607 degrees ! Estimated noise=1823.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828751 Jy ! Component: 100 - total flux cleaned = 0.000845123 Jy ! Component: 150 - total flux cleaned = 0.00085938 Jy ! Component: 200 - total flux cleaned = 0.000874461 Jy ! Total flux subtracted in 200 components = 0.000874461 Jy ! Clean residual min=-0.002173 max=0.002277 Jy/beam ! Clean residual mean=0.000004 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0912887 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.70683e-05 Jy ! Component: 100 - total flux cleaned = 4.10017e-05 Jy ! Component: 150 - total flux cleaned = 5.32093e-05 Jy ! Component: 200 - total flux cleaned = 7.77356e-05 Jy ! Total flux subtracted in 200 components = 7.77356e-05 Jy ! Clean residual min=-0.002150 max=0.002276 Jy/beam ! Clean residual mean=0.000004 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.0913664 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.0913664 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=8.879 mas, bpa=-1.335 degrees ! Estimated noise=1421.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00027059 Jy ! Component: 100 - total flux cleaned = -0.00027077 Jy ! Component: 150 - total flux cleaned = -0.000246265 Jy ! Component: 200 - total flux cleaned = -0.000223599 Jy ! Total flux subtracted in 200 components = -0.000223599 Jy ! Clean residual min=-0.003359 max=0.002671 Jy/beam ! Clean residual mean=0.000002 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0911428 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.0911429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087333Jy sigma=0.000628 ! Fit after self-cal, rms=0.087327Jy sigma=0.000628 wmodel J1845-2200_S_2017_07_16_pus_map.mod ! Writing 77 model components to file: J1845-2200_S_2017_07_16_pus_map.mod wobs J1845-2200_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1845-2200_S_2017_07_16_pus_uvs.fits wwins J1845-2200_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1845-2200_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000685269 Jy ! Component: 100 - total flux cleaned = -0.000408503 Jy ! Component: 150 - total flux cleaned = -0.000156998 Jy ! Component: 200 - total flux cleaned = 3.95672e-05 Jy ! Component: 250 - total flux cleaned = 7.80931e-05 Jy ! Component: 300 - total flux cleaned = -2.72777e-05 Jy ! Component: 350 - total flux cleaned = -0.000195513 Jy ! Component: 400 - total flux cleaned = -0.00032462 Jy ! Component: 450 - total flux cleaned = -0.000387437 Jy ! Component: 500 - total flux cleaned = -0.000388173 Jy ! Component: 550 - total flux cleaned = -0.000358967 Jy ! Component: 600 - total flux cleaned = -0.000301981 Jy ! Component: 650 - total flux cleaned = -0.000163322 Jy ! Component: 700 - total flux cleaned = -2.95556e-05 Jy ! Component: 750 - total flux cleaned = 7.52636e-05 Jy ! Component: 800 - total flux cleaned = 0.000253188 Jy ! Component: 850 - total flux cleaned = 0.000377549 Jy ! Component: 900 - total flux cleaned = 0.000547025 Jy ! Component: 950 - total flux cleaned = 0.000570469 Jy ! Component: 1000 - total flux cleaned = 0.000663399 Jy ! Component: 1050 - total flux cleaned = 0.000641495 Jy ! Component: 1100 - total flux cleaned = 0.000708649 Jy ! Component: 1150 - total flux cleaned = 0.000751812 Jy ! Component: 1200 - total flux cleaned = 0.000794709 Jy ! Component: 1250 - total flux cleaned = 0.000899423 Jy ! Component: 1300 - total flux cleaned = 0.000858501 Jy ! Component: 1350 - total flux cleaned = 0.000960197 Jy ! Component: 1400 - total flux cleaned = 0.000919877 Jy ! Component: 1450 - total flux cleaned = 0.000939828 Jy ! Component: 1500 - total flux cleaned = 0.000901526 Jy ! Component: 1550 - total flux cleaned = 0.00088228 Jy ! Component: 1600 - total flux cleaned = 0.000825873 Jy ! Component: 1650 - total flux cleaned = 0.000733569 Jy ! Component: 1700 - total flux cleaned = 0.000679022 Jy ! Component: 1750 - total flux cleaned = 0.000643426 Jy ! Component: 1800 - total flux cleaned = 0.00060825 Jy ! Component: 1850 - total flux cleaned = 0.000608477 Jy ! Component: 1900 - total flux cleaned = 0.000659781 Jy ! Component: 1950 - total flux cleaned = 0.000659683 Jy ! Component: 2000 - total flux cleaned = 0.000659383 Jy ! Component: 2050 - total flux cleaned = 0.000675796 Jy ! Component: 2100 - total flux cleaned = 0.000691939 Jy ! Component: 2150 - total flux cleaned = 0.000675589 Jy ! Component: 2200 - total flux cleaned = 0.000707534 Jy ! Component: 2250 - total flux cleaned = 0.000675931 Jy ! Component: 2300 - total flux cleaned = 0.00072286 Jy ! Component: 2350 - total flux cleaned = 0.000738361 Jy ! Component: 2400 - total flux cleaned = 0.000799524 Jy ! Component: 2450 - total flux cleaned = 0.000845086 Jy ! Component: 2500 - total flux cleaned = 0.000845376 Jy ! Component: 2550 - total flux cleaned = 0.000934732 Jy ! Component: 2600 - total flux cleaned = 0.000979147 Jy ! Component: 2650 - total flux cleaned = 0.00106698 Jy ! Component: 2700 - total flux cleaned = 0.00109605 Jy ! Component: 2750 - total flux cleaned = 0.00113923 Jy ! Component: 2800 - total flux cleaned = 0.00112477 Jy ! Component: 2850 - total flux cleaned = 0.00109627 Jy ! Component: 2900 - total flux cleaned = 0.00104 Jy ! Component: 2950 - total flux cleaned = 0.00105402 Jy ! Component: 3000 - total flux cleaned = 0.00101248 Jy ! Component: 3050 - total flux cleaned = 0.00101253 Jy ! Component: 3100 - total flux cleaned = 0.000971442 Jy ! Component: 3150 - total flux cleaned = 0.000984933 Jy ! Component: 3200 - total flux cleaned = 0.000944286 Jy ! Component: 3250 - total flux cleaned = 0.000903853 Jy ! Component: 3300 - total flux cleaned = 0.000877163 Jy ! Component: 3350 - total flux cleaned = 0.000863934 Jy ! Component: 3400 - total flux cleaned = 0.000811154 Jy ! Component: 3450 - total flux cleaned = 0.000811312 Jy ! Component: 3500 - total flux cleaned = 0.000772163 Jy ! Component: 3550 - total flux cleaned = 0.000772135 Jy ! Component: 3600 - total flux cleaned = 0.000720353 Jy ! Component: 3650 - total flux cleaned = 0.000669009 Jy ! Component: 3700 - total flux cleaned = 0.00065632 Jy ! Component: 3750 - total flux cleaned = 0.000630846 Jy ! Component: 3800 - total flux cleaned = 0.000593058 Jy ! Component: 3850 - total flux cleaned = 0.00058057 Jy ! Component: 3900 - total flux cleaned = 0.000568035 Jy ! Component: 3950 - total flux cleaned = 0.000530803 Jy ! Component: 4000 - total flux cleaned = 0.000493822 Jy ! Component: 4050 - total flux cleaned = 0.000481493 Jy ! Total flux subtracted in 4096 components = 0.000457095 Jy ! Clean residual min=-0.000734 max=0.000733 Jy/beam ! Clean residual mean=0.000002 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.0916 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 318 components and 0.0916 Jy ![Exited script file: muppet] wmap "J1845-2200_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 8.879 at -1.335 degrees (North through East) ! Clean map min=-0.0021961 max=0.073357 Jy/beam ! Writing clean map to FITS file: J1845-2200_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0733573 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214968 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.879128 0.879128 1.75826 3.51651 7.03302 14.066 28.1321 56.2642 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 8.879 at -1.335 degrees (North through East) ! Clean map min=-0.0021961 max=0.073357 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1845-2200_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:16:05 2019