! Started logfile: J1844-1324_S_2017_10_09_pus_uvs.log on Sun May 12 13:18:00 2019 obs J1844-1324_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1844-1324_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.757729 visibilities/baseline/integration-bin. ! Found source: J1844-1324 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12548 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1844-1324_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 243 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 651 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.962346Jy sigma=0.007766 ! Fit after self-cal, rms=0.935489Jy sigma=0.007564 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.643 mas, bmaj=13.08 mas, bpa=-17.18 degrees ! Estimated noise=1552.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0470393 Jy ! Component: 100 - total flux cleaned = 0.0640235 Jy ! Total flux subtracted in 100 components = 0.0640235 Jy ! Clean residual min=-0.005109 max=0.008423 Jy/beam ! Clean residual mean=-0.000015 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.0640235 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0640235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090340Jy sigma=0.000683 ! Fit after self-cal, rms=0.090064Jy sigma=0.000681 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=14.95 mas, bpa=-17.2 degrees ! Estimated noise=931.231 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016248 Jy ! Component: 100 - total flux cleaned = 0.02535 Jy ! Component: 150 - total flux cleaned = 0.0310691 Jy ! Component: 200 - total flux cleaned = 0.0350254 Jy ! Total flux subtracted in 200 components = 0.0350254 Jy ! Clean residual min=-0.004121 max=0.005768 Jy/beam ! Clean residual mean=-0.000008 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.0990489 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 95 components and 0.0990489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086833Jy sigma=0.000657 ! Fit after self-cal, rms=0.086674Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.91 HN 1.07 KP 1.05 ! LA 0.95 MK 1.16 NL 0.97 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.20 KP 1.00 ! LA 0.92 MK 1.07 NL 1.17 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.98 KP 0.92 ! LA 0.77 MK 1.09 NL 1.33 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.84 KP 1.00* ! LA 1.00* MK 0.78 NL 1.00* OV 1.00* ! PT 0.94 ! ! ! Fit before self-cal, rms=0.086674Jy sigma=0.000655 ! Fit after self-cal, rms=0.086622Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=15.27 mas, bpa=-16.91 degrees ! Estimated noise=947.219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100115 Jy ! Component: 100 - total flux cleaned = 0.00113978 Jy ! Component: 150 - total flux cleaned = 0.00118101 Jy ! Component: 200 - total flux cleaned = 0.00121386 Jy ! Total flux subtracted in 200 components = 0.00121386 Jy ! Clean residual min=-0.002528 max=0.002961 Jy/beam ! Clean residual mean=-0.000008 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.100263 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 0.100263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086575Jy sigma=0.000651 ! Fit after self-cal, rms=0.086692Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086692Jy sigma=0.000650 ! Fit after self-cal, rms=0.087415Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=15.48 mas, bpa=-17.05 degrees ! Estimated noise=943.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633803 Jy ! Component: 100 - total flux cleaned = 0.000668583 Jy ! Component: 150 - total flux cleaned = 0.00072504 Jy ! Component: 200 - total flux cleaned = 0.000748209 Jy ! Total flux subtracted in 200 components = 0.000748209 Jy ! Clean residual min=-0.002345 max=0.002317 Jy/beam ! Clean residual mean=-0.000004 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.101011 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 121 components and 0.101011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087392Jy sigma=0.000648 ! Fit after self-cal, rms=0.087459Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.15078e-05 Jy ! Component: 100 - total flux cleaned = 4.98948e-05 Jy ! Component: 150 - total flux cleaned = 2.83241e-05 Jy ! Component: 200 - total flux cleaned = -1.10881e-05 Jy ! Total flux subtracted in 200 components = -1.10881e-05 Jy ! Clean residual min=-0.002393 max=0.002328 Jy/beam ! Clean residual mean=-0.000005 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.101 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 128 components and 0.101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087445Jy sigma=0.000648 ! Fit after self-cal, rms=0.087438Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087438Jy sigma=0.000648 ! Fit after self-cal, rms=0.087396Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=15.56 mas, bpa=-16.98 degrees ! Estimated noise=939.188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321144 Jy ! Component: 100 - total flux cleaned = 0.000398064 Jy ! Component: 150 - total flux cleaned = 0.000419868 Jy ! Component: 200 - total flux cleaned = 0.00040017 Jy ! Total flux subtracted in 200 components = 0.00040017 Jy ! Clean residual min=-0.002340 max=0.002342 Jy/beam ! Clean residual mean=-0.000004 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.1014 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 130 components and 0.1014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087382Jy sigma=0.000648 ! Fit after self-cal, rms=0.087374Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.56037e-05 Jy ! Component: 100 - total flux cleaned = 1.58611e-05 Jy ! Component: 150 - total flux cleaned = -2.54322e-05 Jy ! Component: 200 - total flux cleaned = -4.42416e-05 Jy ! Total flux subtracted in 200 components = -4.42416e-05 Jy ! Clean residual min=-0.002320 max=0.002392 Jy/beam ! Clean residual mean=-0.000004 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.101356 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 132 components and 0.101356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087362Jy sigma=0.000648 ! Fit after self-cal, rms=0.087351Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087351Jy sigma=0.000648 ! Fit after self-cal, rms=0.087129Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.935 mas, bmaj=18.58 mas, bpa=-9.268 degrees ! Estimated noise=1142.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223559 Jy ! Component: 100 - total flux cleaned = 0.000116107 Jy ! Component: 150 - total flux cleaned = 0.000105249 Jy ! Component: 200 - total flux cleaned = 8.46087e-05 Jy ! Total flux subtracted in 200 components = 8.46087e-05 Jy ! Clean residual min=-0.003030 max=0.002297 Jy/beam ! Clean residual mean=-0.000007 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.10144 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 142 components and 0.10144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087125Jy sigma=0.000648 ! Fit after self-cal, rms=0.087120Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.92965e-05 Jy ! Component: 100 - total flux cleaned = -5.02651e-05 Jy ! Component: 150 - total flux cleaned = -5.99966e-05 Jy ! Component: 200 - total flux cleaned = -6.02057e-05 Jy ! Total flux subtracted in 200 components = -6.02057e-05 Jy ! Clean residual min=-0.003027 max=0.002313 Jy/beam ! Clean residual mean=-0.000007 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.10138 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 144 components and 0.10138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087118Jy sigma=0.000648 ! Fit after self-cal, rms=0.087113Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=15.61 mas, bpa=-16.92 degrees ! Estimated noise=935.083 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.2 x 15.61 at -16.92 degrees (North through East) ! Clean map min=-0.002287 max=0.060482 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=13.55 mas, bpa=-16.93 degrees ! Estimated noise=1520.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460311 Jy ! Component: 100 - total flux cleaned = 0.0651912 Jy ! Component: 150 - total flux cleaned = 0.0768605 Jy ! Component: 200 - total flux cleaned = 0.084587 Jy ! Total flux subtracted in 200 components = 0.084587 Jy ! Clean residual min=-0.003913 max=0.004260 Jy/beam ! Clean residual mean=-0.000008 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.084587 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.084587 Jy ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=15.61 mas, bpa=-16.92 degrees ! Estimated noise=935.083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00703769 Jy ! Component: 100 - total flux cleaned = 0.0111646 Jy ! Component: 150 - total flux cleaned = 0.013755 Jy ! Component: 200 - total flux cleaned = 0.0153991 Jy ! Total flux subtracted in 200 components = 0.0153991 Jy ! Clean residual min=-0.002527 max=0.002400 Jy/beam ! Clean residual mean=-0.000005 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0999862 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 66 components and 0.0999862 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.935 mas, bmaj=18.58 mas, bpa=-9.268 degrees ! Estimated noise=1142.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112518 Jy ! Component: 100 - total flux cleaned = 0.00124028 Jy ! Component: 150 - total flux cleaned = 0.00130793 Jy ! Component: 200 - total flux cleaned = 0.00133694 Jy ! Total flux subtracted in 200 components = 0.00133694 Jy ! Clean residual min=-0.003026 max=0.002306 Jy/beam ! Clean residual mean=-0.000007 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.101323 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.03052e-05 Jy ! Component: 100 - total flux cleaned = -3.00049e-05 Jy ! Component: 150 - total flux cleaned = -3.86856e-05 Jy ! Component: 200 - total flux cleaned = -5.62661e-05 Jy ! Total flux subtracted in 200 components = -5.62661e-05 Jy ! Clean residual min=-0.003010 max=0.002306 Jy/beam ! Clean residual mean=-0.000007 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.101267 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 0.101267 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=15.61 mas, bpa=-16.92 degrees ! Estimated noise=935.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.06088e-05 Jy ! Component: 100 - total flux cleaned = -6.40406e-06 Jy ! Component: 150 - total flux cleaned = -2.80467e-05 Jy ! Component: 200 - total flux cleaned = -2.68425e-05 Jy ! Total flux subtracted in 200 components = -2.68425e-05 Jy ! Clean residual min=-0.002343 max=0.002493 Jy/beam ! Clean residual mean=-0.000004 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.10124 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.10124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087109Jy sigma=0.000648 ! Fit after self-cal, rms=0.087070Jy sigma=0.000647 wmodel J1844-1324_S_2017_10_09_pus_map.mod ! Writing 95 model components to file: J1844-1324_S_2017_10_09_pus_map.mod wobs J1844-1324_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1844-1324_S_2017_10_09_pus_uvs.fits wwins J1844-1324_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1844-1324_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.57428e-05 Jy ! Component: 100 - total flux cleaned = -0.000127153 Jy ! Component: 150 - total flux cleaned = -0.000334556 Jy ! Component: 200 - total flux cleaned = -0.000399924 Jy ! Component: 250 - total flux cleaned = -0.000493641 Jy ! Component: 300 - total flux cleaned = -0.00055469 Jy ! Component: 350 - total flux cleaned = -0.000816163 Jy ! Component: 400 - total flux cleaned = -0.000900102 Jy ! Component: 450 - total flux cleaned = -0.00109009 Jy ! Component: 500 - total flux cleaned = -0.00114282 Jy ! Component: 550 - total flux cleaned = -0.00129607 Jy ! Component: 600 - total flux cleaned = -0.00147023 Jy ! Component: 650 - total flux cleaned = -0.00168832 Jy ! Component: 700 - total flux cleaned = -0.00182987 Jy ! Component: 750 - total flux cleaned = -0.00206021 Jy ! Component: 800 - total flux cleaned = -0.00223954 Jy ! Component: 850 - total flux cleaned = -0.00239316 Jy ! Component: 900 - total flux cleaned = -0.0026079 Jy ! Component: 950 - total flux cleaned = -0.0027753 Jy ! Component: 1000 - total flux cleaned = -0.00297983 Jy ! Component: 1050 - total flux cleaned = -0.00309965 Jy ! Component: 1100 - total flux cleaned = -0.00327527 Jy ! Component: 1150 - total flux cleaned = -0.00337045 Jy ! Component: 1200 - total flux cleaned = -0.00352022 Jy ! Component: 1250 - total flux cleaned = -0.00357494 Jy ! Component: 1300 - total flux cleaned = -0.0036471 Jy ! Component: 1350 - total flux cleaned = -0.00373605 Jy ! Component: 1400 - total flux cleaned = -0.00385815 Jy ! Component: 1450 - total flux cleaned = -0.00392681 Jy ! Component: 1500 - total flux cleaned = -0.00401101 Jy ! Component: 1550 - total flux cleaned = -0.00404407 Jy ! Component: 1600 - total flux cleaned = -0.00419046 Jy ! Component: 1650 - total flux cleaned = -0.00422218 Jy ! Component: 1700 - total flux cleaned = -0.00426944 Jy ! Component: 1750 - total flux cleaned = -0.00433198 Jy ! Component: 1800 - total flux cleaned = -0.00445434 Jy ! Component: 1850 - total flux cleaned = -0.00451456 Jy ! Component: 1900 - total flux cleaned = -0.00461869 Jy ! Component: 1950 - total flux cleaned = -0.00472146 Jy ! Component: 2000 - total flux cleaned = -0.00480817 Jy ! Component: 2050 - total flux cleaned = -0.00493666 Jy ! Component: 2100 - total flux cleaned = -0.00502112 Jy ! Component: 2150 - total flux cleaned = -0.0051183 Jy ! Component: 2200 - total flux cleaned = -0.00520065 Jy ! Component: 2250 - total flux cleaned = -0.0053091 Jy ! Component: 2300 - total flux cleaned = -0.00536274 Jy ! Component: 2350 - total flux cleaned = -0.00548173 Jy ! Component: 2400 - total flux cleaned = -0.00558624 Jy ! Component: 2450 - total flux cleaned = -0.00568941 Jy ! Component: 2500 - total flux cleaned = -0.00572756 Jy ! Component: 2550 - total flux cleaned = -0.00581578 Jy ! Component: 2600 - total flux cleaned = -0.00590302 Jy ! Component: 2650 - total flux cleaned = -0.00597695 Jy ! Component: 2700 - total flux cleaned = -0.00601356 Jy ! Component: 2750 - total flux cleaned = -0.00609797 Jy ! Component: 2800 - total flux cleaned = -0.00621727 Jy ! Component: 2850 - total flux cleaned = -0.00632363 Jy ! Component: 2900 - total flux cleaned = -0.00640551 Jy ! Component: 2950 - total flux cleaned = -0.00648651 Jy ! Component: 3000 - total flux cleaned = -0.00657821 Jy ! Component: 3050 - total flux cleaned = -0.00665778 Jy ! Component: 3100 - total flux cleaned = -0.00671402 Jy ! Component: 3150 - total flux cleaned = -0.00674756 Jy ! Component: 3200 - total flux cleaned = -0.0067807 Jy ! Component: 3250 - total flux cleaned = -0.00680273 Jy ! Component: 3300 - total flux cleaned = -0.00683551 Jy ! Component: 3350 - total flux cleaned = -0.00688949 Jy ! Component: 3400 - total flux cleaned = -0.00691104 Jy ! Component: 3450 - total flux cleaned = -0.0069537 Jy ! Component: 3500 - total flux cleaned = -0.00701705 Jy ! Component: 3550 - total flux cleaned = -0.00704843 Jy ! Component: 3600 - total flux cleaned = -0.00706927 Jy ! Component: 3650 - total flux cleaned = -0.00712087 Jy ! Component: 3700 - total flux cleaned = -0.00715159 Jy ! Component: 3750 - total flux cleaned = -0.00718192 Jy ! Component: 3800 - total flux cleaned = -0.00721216 Jy ! Component: 3850 - total flux cleaned = -0.00724218 Jy ! Component: 3900 - total flux cleaned = -0.00722233 Jy ! Component: 3950 - total flux cleaned = -0.00725204 Jy ! Component: 4000 - total flux cleaned = -0.00726191 Jy ! Component: 4050 - total flux cleaned = -0.00730104 Jy ! Total flux subtracted in 4096 components = -0.00730102 Jy ! Clean residual min=-0.000558 max=0.000581 Jy/beam ! Clean residual mean=0.000001 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.093939 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 359 components and 0.093939 Jy ![Exited script file: muppet] wmap "J1844-1324_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.2 x 15.61 at -16.92 degrees (North through East) ! Clean map min=-0.0014672 max=0.060391 Jy/beam ! Writing clean map to FITS file: J1844-1324_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0603907 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172884 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.858828 0.858828 1.71766 3.43531 6.87062 13.7412 27.4825 54.965 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.2 x 15.61 at -16.92 degrees (North through East) ! Clean map min=-0.0014672 max=0.060391 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1844-1324_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:05 2019