! Started logfile: J1844-1324_S_2017_04_28_pus_uvs.log on Thu May 2 16:31:42 2019 obs J1844-1324_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1844-1324_S_2017_04_28_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97037 visibilities/baseline/integration-bin. ! Found source: J1844-1324 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 16768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1844-1324_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 489 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.967259Jy sigma=0.013105 ! Fit after self-cal, rms=0.937109Jy sigma=0.012982 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.12 mas, bpa=0.2734 degrees ! Estimated noise=1204.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450307 Jy ! Component: 100 - total flux cleaned = 0.0600167 Jy ! Total flux subtracted in 100 components = 0.0600167 Jy ! Clean residual min=-0.005575 max=0.008115 Jy/beam ! Clean residual mean=0.000009 rms=0.001661 Jy/beam ! Combined flux in latest and established models = 0.0600167 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0600167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098552Jy sigma=0.000929 ! Fit after self-cal, rms=0.098295Jy sigma=0.000927 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=8.671 mas, bpa=0.2488 degrees ! Estimated noise=786.069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137109 Jy ! Component: 100 - total flux cleaned = 0.0207154 Jy ! Component: 150 - total flux cleaned = 0.024748 Jy ! Component: 200 - total flux cleaned = 0.0272407 Jy ! Total flux subtracted in 200 components = 0.0272407 Jy ! Clean residual min=-0.004982 max=0.005569 Jy/beam ! Clean residual mean=0.000027 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.0872574 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 47 components and 0.0872574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095577Jy sigma=0.001076 ! Fit after self-cal, rms=0.095462Jy sigma=0.001075 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.93 HN 1.13 KP 0.95 ! LA 0.90 MK 0.99 NL 1.06 OV 1.02 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.82 HN 1.13 KP 0.95 ! LA 0.92 MK 1.01 NL 1.02 OV 1.04 ! PT 0.93 SC 1.15 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.88 HN 1.06 KP 0.96 ! LA 0.88 MK 0.97 NL 1.10 OV 0.87 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 0.81 KP 1.00* ! LA 24.31 MK 1.00* NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.095462Jy sigma=0.001075 ! Fit after self-cal, rms=0.684830Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.553 mas, bmaj=8.579 mas, bpa=0.2101 degrees ! Estimated noise=789.605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035565 Jy ! Component: 100 - total flux cleaned = 0.00551433 Jy ! Component: 150 - total flux cleaned = 0.0068526 Jy ! Component: 200 - total flux cleaned = 0.00733759 Jy ! Total flux subtracted in 200 components = 0.00733759 Jy ! Clean residual min=-0.002884 max=0.002677 Jy/beam ! Clean residual mean=0.000001 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.094595 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.094595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684397Jy sigma=0.000678 ! Fit after self-cal, rms=0.685290Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.685290Jy sigma=0.000676 ! Fit after self-cal, rms=0.668475Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=8.514 mas, bpa=-0.1566 degrees ! Estimated noise=789.646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195768 Jy ! Component: 100 - total flux cleaned = 0.00305696 Jy ! Component: 150 - total flux cleaned = 0.00345045 Jy ! Component: 200 - total flux cleaned = 0.00353477 Jy ! Total flux subtracted in 200 components = 0.00353477 Jy ! Clean residual min=-0.002179 max=0.002028 Jy/beam ! Clean residual mean=-0.000005 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0981297 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.0981297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.668372Jy sigma=0.000670 ! Fit after self-cal, rms=0.668478Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466683 Jy ! Component: 100 - total flux cleaned = 0.000590452 Jy ! Component: 150 - total flux cleaned = 0.000591384 Jy ! Component: 200 - total flux cleaned = 0.000640009 Jy ! Total flux subtracted in 200 components = 0.000640009 Jy ! Clean residual min=-0.002257 max=0.001975 Jy/beam ! Clean residual mean=-0.000004 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0987698 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.0987698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.668474Jy sigma=0.000670 ! Fit after self-cal, rms=0.668485Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.668485Jy sigma=0.000670 ! Fit after self-cal, rms=0.703804Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=8.442 mas, bpa=-0.3718 degrees ! Estimated noise=787.495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153554 Jy ! Component: 100 - total flux cleaned = 0.002389 Jy ! Component: 150 - total flux cleaned = 0.00284481 Jy ! Component: 200 - total flux cleaned = 0.00294961 Jy ! Total flux subtracted in 200 components = 0.00294961 Jy ! Clean residual min=-0.002201 max=0.001926 Jy/beam ! Clean residual mean=-0.000005 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.101719 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.101719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.703710Jy sigma=0.000669 ! Fit after self-cal, rms=0.703749Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316393 Jy ! Component: 100 - total flux cleaned = 0.000343172 Jy ! Component: 150 - total flux cleaned = 0.000322471 Jy ! Component: 200 - total flux cleaned = 0.00030336 Jy ! Total flux subtracted in 200 components = 0.00030336 Jy ! Clean residual min=-0.002230 max=0.001873 Jy/beam ! Clean residual mean=-0.000005 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.102023 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.102023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.703746Jy sigma=0.000669 ! Fit after self-cal, rms=0.703764Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.703764Jy sigma=0.000669 ! Fit after self-cal, rms=0.716995Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.698 mas, bmaj=14.97 mas, bpa=4.174 degrees ! Estimated noise=973.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148449 Jy ! Component: 100 - total flux cleaned = 0.00218648 Jy ! Component: 150 - total flux cleaned = 0.00260715 Jy ! Component: 200 - total flux cleaned = 0.0027751 Jy ! Total flux subtracted in 200 components = 0.0027751 Jy ! Clean residual min=-0.002314 max=0.002105 Jy/beam ! Clean residual mean=-0.000008 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.104798 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.104798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.716903Jy sigma=0.000669 ! Fit after self-cal, rms=0.716939Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202188 Jy ! Component: 100 - total flux cleaned = 0.000220448 Jy ! Component: 150 - total flux cleaned = 0.000236374 Jy ! Component: 200 - total flux cleaned = 0.000251338 Jy ! Total flux subtracted in 200 components = 0.000251338 Jy ! Clean residual min=-0.002292 max=0.002112 Jy/beam ! Clean residual mean=-0.000008 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.105049 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 110 components and 0.105049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.716938Jy sigma=0.000669 ! Fit after self-cal, rms=0.716943Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=8.383 mas, bpa=-0.569 degrees ! Estimated noise=788.274 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.401 x 8.383 at -0.569 degrees (North through East) ! Clean map min=-0.0021804 max=0.058361 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=6.995 mas, bpa=-0.4224 degrees ! Estimated noise=1171.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438589 Jy ! Component: 100 - total flux cleaned = 0.0632345 Jy ! Component: 150 - total flux cleaned = 0.0747351 Jy ! Component: 200 - total flux cleaned = 0.0822486 Jy ! Total flux subtracted in 200 components = 0.0822486 Jy ! Clean residual min=-0.003888 max=0.004181 Jy/beam ! Clean residual mean=-0.000002 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.0822485 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0822485 Jy ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=8.383 mas, bpa=-0.569 degrees ! Estimated noise=788.274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795452 Jy ! Component: 100 - total flux cleaned = 0.0127386 Jy ! Component: 150 - total flux cleaned = 0.0160145 Jy ! Component: 200 - total flux cleaned = 0.0183096 Jy ! Total flux subtracted in 200 components = 0.0183096 Jy ! Clean residual min=-0.002342 max=0.002125 Jy/beam ! Clean residual mean=-0.000004 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.100558 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 58 components and 0.100558 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.698 mas, bmaj=14.97 mas, bpa=4.174 degrees ! Estimated noise=973.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216531 Jy ! Component: 100 - total flux cleaned = 0.00323382 Jy ! Component: 150 - total flux cleaned = 0.00385735 Jy ! Component: 200 - total flux cleaned = 0.00417374 Jy ! Total flux subtracted in 200 components = 0.00417374 Jy ! Clean residual min=-0.002296 max=0.002165 Jy/beam ! Clean residual mean=-0.000008 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.104732 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.21127e-05 Jy ! Component: 100 - total flux cleaned = 0.00016785 Jy ! Component: 150 - total flux cleaned = 0.000184663 Jy ! Component: 200 - total flux cleaned = 0.000208246 Jy ! Total flux subtracted in 200 components = 0.000208246 Jy ! Clean residual min=-0.002272 max=0.002117 Jy/beam ! Clean residual mean=-0.000008 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.10494 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 97 components and 0.10494 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=8.383 mas, bpa=-0.569 degrees ! Estimated noise=788.274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.83269e-05 Jy ! Component: 100 - total flux cleaned = 7.34552e-05 Jy ! Component: 150 - total flux cleaned = 7.39676e-05 Jy ! Component: 200 - total flux cleaned = 5.03996e-05 Jy ! Total flux subtracted in 200 components = 5.03996e-05 Jy ! Clean residual min=-0.002273 max=0.001916 Jy/beam ! Clean residual mean=-0.000005 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.104991 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 110 components and 0.104991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.716953Jy sigma=0.000669 ! Fit after self-cal, rms=0.716965Jy sigma=0.000669 wmodel J1844-1324_S_2017_04_28_pus_map.mod ! Writing 110 model components to file: J1844-1324_S_2017_04_28_pus_map.mod wobs J1844-1324_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1844-1324_S_2017_04_28_pus_uvs.fits wwins J1844-1324_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J1844-1324_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00079789 Jy ! Component: 100 - total flux cleaned = -0.000972723 Jy ! Component: 150 - total flux cleaned = -0.00107325 Jy ! Component: 200 - total flux cleaned = -0.00113763 Jy ! Component: 250 - total flux cleaned = -0.00116904 Jy ! Component: 300 - total flux cleaned = -0.0011385 Jy ! Component: 350 - total flux cleaned = -0.00110908 Jy ! Component: 400 - total flux cleaned = -0.00105081 Jy ! Component: 450 - total flux cleaned = -0.00105126 Jy ! Component: 500 - total flux cleaned = -0.00102279 Jy ! Component: 550 - total flux cleaned = -0.00099452 Jy ! Component: 600 - total flux cleaned = -0.000859811 Jy ! Component: 650 - total flux cleaned = -0.00080774 Jy ! Component: 700 - total flux cleaned = -0.000782038 Jy ! Component: 750 - total flux cleaned = -0.000705364 Jy ! Component: 800 - total flux cleaned = -0.00060518 Jy ! Component: 850 - total flux cleaned = -0.000581221 Jy ! Component: 900 - total flux cleaned = -0.000557226 Jy ! Component: 950 - total flux cleaned = -0.000581014 Jy ! Component: 1000 - total flux cleaned = -0.000580535 Jy ! Component: 1050 - total flux cleaned = -0.000510889 Jy ! Component: 1100 - total flux cleaned = -0.000488026 Jy ! Component: 1150 - total flux cleaned = -0.000510289 Jy ! Component: 1200 - total flux cleaned = -0.000488256 Jy ! Component: 1250 - total flux cleaned = -0.000466318 Jy ! Component: 1300 - total flux cleaned = -0.000444734 Jy ! Component: 1350 - total flux cleaned = -0.000402485 Jy ! Component: 1400 - total flux cleaned = -0.000423439 Jy ! Component: 1450 - total flux cleaned = -0.000382213 Jy ! Component: 1500 - total flux cleaned = -0.000402552 Jy ! Component: 1550 - total flux cleaned = -0.000362499 Jy ! Component: 1600 - total flux cleaned = -0.00036294 Jy ! Component: 1650 - total flux cleaned = -0.000382634 Jy ! Component: 1700 - total flux cleaned = -0.000344466 Jy ! Component: 1750 - total flux cleaned = -0.000363556 Jy ! Component: 1800 - total flux cleaned = -0.000344356 Jy ! Component: 1850 - total flux cleaned = -0.000195645 Jy ! Component: 1900 - total flux cleaned = -0.000140481 Jy ! Component: 1950 - total flux cleaned = -4.94662e-05 Jy ! Component: 2000 - total flux cleaned = 4.05491e-05 Jy ! Component: 2050 - total flux cleaned = 0.000182858 Jy ! Component: 2100 - total flux cleaned = 0.00023559 Jy ! Component: 2150 - total flux cleaned = 0.000287857 Jy ! Component: 2200 - total flux cleaned = 0.000356782 Jy ! Component: 2250 - total flux cleaned = 0.00042525 Jy ! Component: 2300 - total flux cleaned = 0.000509939 Jy ! Component: 2350 - total flux cleaned = 0.000593793 Jy ! Component: 2400 - total flux cleaned = 0.000660206 Jy ! Component: 2450 - total flux cleaned = 0.000676814 Jy ! Component: 2500 - total flux cleaned = 0.000758433 Jy ! Component: 2550 - total flux cleaned = 0.00079084 Jy ! Component: 2600 - total flux cleaned = 0.000886939 Jy ! Component: 2650 - total flux cleaned = 0.000886927 Jy ! Component: 2700 - total flux cleaned = 0.000918523 Jy ! Component: 2750 - total flux cleaned = 0.000980999 Jy ! Component: 2800 - total flux cleaned = 0.00101195 Jy ! Component: 2850 - total flux cleaned = 0.00099641 Jy ! Component: 2900 - total flux cleaned = 0.0010726 Jy ! Component: 2950 - total flux cleaned = 0.00108763 Jy ! Component: 3000 - total flux cleaned = 0.00110253 Jy ! Component: 3050 - total flux cleaned = 0.00114711 Jy ! Component: 3100 - total flux cleaned = 0.00116188 Jy ! Component: 3150 - total flux cleaned = 0.00119133 Jy ! Component: 3200 - total flux cleaned = 0.00124947 Jy ! Component: 3250 - total flux cleaned = 0.00126382 Jy ! Component: 3300 - total flux cleaned = 0.00132118 Jy ! Component: 3350 - total flux cleaned = 0.00132131 Jy ! Component: 3400 - total flux cleaned = 0.00137802 Jy ! Component: 3450 - total flux cleaned = 0.00143392 Jy ! Component: 3500 - total flux cleaned = 0.00140596 Jy ! Component: 3550 - total flux cleaned = 0.0014476 Jy ! Component: 3600 - total flux cleaned = 0.00151636 Jy ! Component: 3650 - total flux cleaned = 0.00144827 Jy ! Component: 3700 - total flux cleaned = 0.00152973 Jy ! Component: 3750 - total flux cleaned = 0.00151636 Jy ! Component: 3800 - total flux cleaned = 0.00150293 Jy ! Component: 3850 - total flux cleaned = 0.00156941 Jy ! Component: 3900 - total flux cleaned = 0.00155619 Jy ! Component: 3950 - total flux cleaned = 0.00159551 Jy ! Component: 4000 - total flux cleaned = 0.0015956 Jy ! Component: 4050 - total flux cleaned = 0.00159567 Jy ! Total flux subtracted in 4096 components = 0.00160854 Jy ! Clean residual min=-0.000854 max=0.000698 Jy/beam ! Clean residual mean=-0.000003 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.106599 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 373 components and 0.106599 Jy ![Exited script file: muppet] wmap "J1844-1324_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.401 x 8.383 at -0.569 degrees (North through East) ! Clean map min=-0.0015906 max=0.057429 Jy/beam ! Writing clean map to FITS file: J1844-1324_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0574295 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235296 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22914 1.22914 2.45828 4.91655 9.8331 19.6662 39.3324 78.6648 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.401 x 8.383 at -0.569 degrees (North through East) ! Clean map min=-0.0015906 max=0.057429 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1844-1324_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:31:46 2019