! Started logfile: J1839-2920_S_2017_10_09_pus_uvs.log on Sun May 12 13:17:56 2019 obs J1839-2920_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1839-2920_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.631992 visibilities/baseline/integration-bin. ! Found source: J1839-2920 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 13196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1839-2920_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 401 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 289 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 827 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932325Jy sigma=0.006314 ! Fit after self-cal, rms=0.910285Jy sigma=0.006188 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.573 mas, bmaj=13.91 mas, bpa=-20.23 degrees ! Estimated noise=1902.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0705334 Jy ! Component: 100 - total flux cleaned = 0.0877673 Jy ! Total flux subtracted in 100 components = 0.0877673 Jy ! Clean residual min=-0.005860 max=0.008561 Jy/beam ! Clean residual mean=-0.000036 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.0877673 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0877673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103985Jy sigma=0.000642 ! Fit after self-cal, rms=0.103904Jy sigma=0.000642 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=16.5 mas, bpa=-21.16 degrees ! Estimated noise=1094.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113501 Jy ! Component: 100 - total flux cleaned = 0.017043 Jy ! Component: 150 - total flux cleaned = 0.0202705 Jy ! Component: 200 - total flux cleaned = 0.0221687 Jy ! Total flux subtracted in 200 components = 0.0221687 Jy ! Clean residual min=-0.003331 max=0.004980 Jy/beam ! Clean residual mean=-0.000022 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.109936 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.109936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102645Jy sigma=0.000634 ! Fit after self-cal, rms=0.102702Jy sigma=0.000634 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.01 HN 1.07 KP 1.02 ! LA 1.05 MK 1.03 NL 0.91 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.10 KP 1.06 ! LA 1.00 MK 0.99 NL 1.05 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.01 HN 1.05 KP 0.85 ! LA 0.80 MK 1.06 NL 1.16 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.84 KP 1.00* ! LA 1.00* MK 0.93 NL 1.00* OV 1.00* ! PT 1.00 ! ! ! Fit before self-cal, rms=0.102702Jy sigma=0.000634 ! Fit after self-cal, rms=0.104802Jy sigma=0.000632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=16.81 mas, bpa=-21.53 degrees ! Estimated noise=1126.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000773682 Jy ! Component: 100 - total flux cleaned = -0.000698774 Jy ! Component: 150 - total flux cleaned = -0.000667665 Jy ! Component: 200 - total flux cleaned = -0.000609227 Jy ! Total flux subtracted in 200 components = -0.000609227 Jy ! Clean residual min=-0.002789 max=0.003354 Jy/beam ! Clean residual mean=0.000006 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.109327 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.109327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104769Jy sigma=0.000632 ! Fit after self-cal, rms=0.104828Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104828Jy sigma=0.000631 ! Fit after self-cal, rms=0.105562Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=16.92 mas, bpa=-21.57 degrees ! Estimated noise=1130.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000244059 Jy ! Component: 100 - total flux cleaned = -0.000187676 Jy ! Component: 150 - total flux cleaned = -0.000137801 Jy ! Component: 200 - total flux cleaned = -0.00011441 Jy ! Total flux subtracted in 200 components = -0.00011441 Jy ! Clean residual min=-0.002876 max=0.003040 Jy/beam ! Clean residual mean=0.000002 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.109212 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.109212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105545Jy sigma=0.000631 ! Fit after self-cal, rms=0.105580Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-49.5, 69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189891 Jy ! Component: 100 - total flux cleaned = 0.00191202 Jy ! Component: 150 - total flux cleaned = 0.00177382 Jy ! Component: 200 - total flux cleaned = 0.00165399 Jy ! Total flux subtracted in 200 components = 0.00165399 Jy ! Clean residual min=-0.002560 max=0.002578 Jy/beam ! Clean residual mean=0.000004 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.110866 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 0.110866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105494Jy sigma=0.000630 ! Fit after self-cal, rms=0.105494Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105494Jy sigma=0.000630 ! Fit after self-cal, rms=0.105426Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=16.96 mas, bpa=-21.5 degrees ! Estimated noise=1130.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706793 Jy ! Component: 100 - total flux cleaned = 0.000584962 Jy ! Component: 150 - total flux cleaned = 0.000440816 Jy ! Component: 200 - total flux cleaned = 0.000376262 Jy ! Total flux subtracted in 200 components = 0.000376262 Jy ! Clean residual min=-0.002459 max=0.002540 Jy/beam ! Clean residual mean=0.000003 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.111243 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 99 components and 0.111243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105388Jy sigma=0.000630 ! Fit after self-cal, rms=0.105388Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221342 Jy ! Component: 100 - total flux cleaned = 0.000154372 Jy ! Component: 150 - total flux cleaned = 0.000185616 Jy ! Component: 200 - total flux cleaned = 0.000214465 Jy ! Total flux subtracted in 200 components = 0.000214465 Jy ! Clean residual min=-0.002428 max=0.002520 Jy/beam ! Clean residual mean=0.000003 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.111457 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.111457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105364Jy sigma=0.000630 ! Fit after self-cal, rms=0.105369Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105369Jy sigma=0.000630 ! Fit after self-cal, rms=0.105151Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.889 mas, bmaj=31.94 mas, bpa=-11.95 degrees ! Estimated noise=1367.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017958 Jy ! Component: 100 - total flux cleaned = 0.00013455 Jy ! Component: 150 - total flux cleaned = 0.00011443 Jy ! Component: 200 - total flux cleaned = 0.000114709 Jy ! Total flux subtracted in 200 components = 0.000114709 Jy ! Clean residual min=-0.002480 max=0.002566 Jy/beam ! Clean residual mean=0.000004 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.111572 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 131 components and 0.111572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105142Jy sigma=0.000630 ! Fit after self-cal, rms=0.105138Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107744 Jy ! Component: 100 - total flux cleaned = 6.98422e-05 Jy ! Component: 150 - total flux cleaned = 5.32399e-05 Jy ! Component: 200 - total flux cleaned = 2.07566e-05 Jy ! Total flux subtracted in 200 components = 2.07566e-05 Jy ! Clean residual min=-0.002445 max=0.002571 Jy/beam ! Clean residual mean=0.000004 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.111592 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 140 components and 0.111593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105132Jy sigma=0.000630 ! Fit after self-cal, rms=0.105133Jy sigma=0.000630 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=16.96 mas, bpa=-21.44 degrees ! Estimated noise=1131.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.171 x 16.96 at -21.44 degrees (North through East) ! Clean map min=-0.0022865 max=0.092297 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=14.26 mas, bpa=-20.38 degrees ! Estimated noise=1978.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716151 Jy ! Component: 100 - total flux cleaned = 0.089626 Jy ! Component: 150 - total flux cleaned = 0.0984617 Jy ! Component: 200 - total flux cleaned = 0.102862 Jy ! Total flux subtracted in 200 components = 0.102862 Jy ! Clean residual min=-0.004636 max=0.004480 Jy/beam ! Clean residual mean=-0.000011 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 0.102862 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.102862 Jy ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=16.96 mas, bpa=-21.44 degrees ! Estimated noise=1131.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514311 Jy ! Component: 100 - total flux cleaned = 0.00818268 Jy ! Component: 150 - total flux cleaned = 0.0088386 Jy ! Component: 200 - total flux cleaned = 0.00898984 Jy ! Total flux subtracted in 200 components = 0.00898984 Jy ! Clean residual min=-0.002709 max=0.002705 Jy/beam ! Clean residual mean=0.000001 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.111852 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.111852 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.889 mas, bmaj=31.94 mas, bpa=-11.95 degrees ! Estimated noise=1367.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.04476e-05 Jy ! Component: 100 - total flux cleaned = -0.000214801 Jy ! Component: 150 - total flux cleaned = -0.000254361 Jy ! Component: 200 - total flux cleaned = -0.000289977 Jy ! Total flux subtracted in 200 components = -0.000289977 Jy ! Clean residual min=-0.002400 max=0.002678 Jy/beam ! Clean residual mean=0.000003 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.111562 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.11006e-05 Jy ! Component: 100 - total flux cleaned = -3.02843e-05 Jy ! Component: 150 - total flux cleaned = -5.69815e-05 Jy ! Component: 200 - total flux cleaned = -8.01842e-05 Jy ! Total flux subtracted in 200 components = -8.01842e-05 Jy ! Clean residual min=-0.002381 max=0.002650 Jy/beam ! Clean residual mean=0.000003 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.111482 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 71 components and 0.111482 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=16.96 mas, bpa=-21.44 degrees ! Estimated noise=1131.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.57087e-05 Jy ! Component: 100 - total flux cleaned = 5.90156e-05 Jy ! Component: 150 - total flux cleaned = 5.84217e-05 Jy ! Component: 200 - total flux cleaned = 5.82491e-05 Jy ! Total flux subtracted in 200 components = 5.82491e-05 Jy ! Clean residual min=-0.002521 max=0.002576 Jy/beam ! Clean residual mean=0.000001 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.11154 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 0.11154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105143Jy sigma=0.000630 ! Fit after self-cal, rms=0.105127Jy sigma=0.000630 wmodel J1839-2920_S_2017_10_09_pus_map.mod ! Writing 90 model components to file: J1839-2920_S_2017_10_09_pus_map.mod wobs J1839-2920_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1839-2920_S_2017_10_09_pus_uvs.fits wwins J1839-2920_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1839-2920_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222642 Jy ! Component: 100 - total flux cleaned = 0.000264509 Jy ! Component: 150 - total flux cleaned = 0.000338735 Jy ! Component: 200 - total flux cleaned = 0.000549717 Jy ! Component: 250 - total flux cleaned = 0.000783221 Jy ! Component: 300 - total flux cleaned = 0.000910852 Jy ! Component: 350 - total flux cleaned = 0.000880463 Jy ! Component: 400 - total flux cleaned = 0.000823446 Jy ! Component: 450 - total flux cleaned = 0.000824031 Jy ! Component: 500 - total flux cleaned = 0.000743541 Jy ! Component: 550 - total flux cleaned = 0.000665302 Jy ! Component: 600 - total flux cleaned = 0.000589578 Jy ! Component: 650 - total flux cleaned = 0.000516271 Jy ! Component: 700 - total flux cleaned = 0.000444551 Jy ! Component: 750 - total flux cleaned = 0.00042114 Jy ! Component: 800 - total flux cleaned = 0.000353394 Jy ! Component: 850 - total flux cleaned = 0.000243414 Jy ! Component: 900 - total flux cleaned = 0.000178949 Jy ! Component: 950 - total flux cleaned = 0.000116323 Jy ! Component: 1000 - total flux cleaned = 1.37789e-05 Jy ! Component: 1050 - total flux cleaned = -8.69408e-05 Jy ! Component: 1100 - total flux cleaned = -0.000245138 Jy ! Component: 1150 - total flux cleaned = -0.00039988 Jy ! Component: 1200 - total flux cleaned = -0.00051399 Jy ! Component: 1250 - total flux cleaned = -0.000645074 Jy ! Component: 1300 - total flux cleaned = -0.000773921 Jy ! Component: 1350 - total flux cleaned = -0.000936791 Jy ! Component: 1400 - total flux cleaned = -0.00104365 Jy ! Component: 1450 - total flux cleaned = -0.00111418 Jy ! Component: 1500 - total flux cleaned = -0.00123561 Jy ! Component: 1550 - total flux cleaned = -0.0013378 Jy ! Component: 1600 - total flux cleaned = -0.00140519 Jy ! Component: 1650 - total flux cleaned = -0.00150475 Jy ! Component: 1700 - total flux cleaned = -0.00155373 Jy ! Component: 1750 - total flux cleaned = -0.00166664 Jy ! Component: 1800 - total flux cleaned = -0.00174646 Jy ! Component: 1850 - total flux cleaned = -0.00179369 Jy ! Component: 1900 - total flux cleaned = -0.00191801 Jy ! Component: 1950 - total flux cleaned = -0.00197952 Jy ! Component: 2000 - total flux cleaned = -0.0020706 Jy ! Component: 2050 - total flux cleaned = -0.00213048 Jy ! Component: 2100 - total flux cleaned = -0.00217521 Jy ! Component: 2150 - total flux cleaned = -0.00223426 Jy ! Component: 2200 - total flux cleaned = -0.00227793 Jy ! Component: 2250 - total flux cleaned = -0.00232108 Jy ! Component: 2300 - total flux cleaned = -0.00236401 Jy ! Component: 2350 - total flux cleaned = -0.00244897 Jy ! Component: 2400 - total flux cleaned = -0.00246299 Jy ! Component: 2450 - total flux cleaned = -0.00254682 Jy ! Component: 2500 - total flux cleaned = -0.00265746 Jy ! Component: 2550 - total flux cleaned = -0.00269857 Jy ! Component: 2600 - total flux cleaned = -0.0027666 Jy ! Component: 2650 - total flux cleaned = -0.00283413 Jy ! Component: 2700 - total flux cleaned = -0.00287445 Jy ! Component: 2750 - total flux cleaned = -0.00299432 Jy ! Component: 2800 - total flux cleaned = -0.00299425 Jy ! Component: 2850 - total flux cleaned = -0.00305991 Jy ! Component: 2900 - total flux cleaned = -0.00309906 Jy ! Component: 2950 - total flux cleaned = -0.00315102 Jy ! Component: 3000 - total flux cleaned = -0.0032154 Jy ! Component: 3050 - total flux cleaned = -0.00327957 Jy ! Component: 3100 - total flux cleaned = -0.00330504 Jy ! Component: 3150 - total flux cleaned = -0.00329235 Jy ! Component: 3200 - total flux cleaned = -0.00334291 Jy ! Component: 3250 - total flux cleaned = -0.00336799 Jy ! Component: 3300 - total flux cleaned = -0.00338052 Jy ! Component: 3350 - total flux cleaned = -0.00338061 Jy ! Component: 3400 - total flux cleaned = -0.0033806 Jy ! Component: 3450 - total flux cleaned = -0.00340527 Jy ! Component: 3500 - total flux cleaned = -0.0034176 Jy ! Component: 3550 - total flux cleaned = -0.00341757 Jy ! Component: 3600 - total flux cleaned = -0.0034176 Jy ! Component: 3650 - total flux cleaned = -0.00340552 Jy ! Component: 3700 - total flux cleaned = -0.00340557 Jy ! Component: 3750 - total flux cleaned = -0.00342973 Jy ! Component: 3800 - total flux cleaned = -0.00345379 Jy ! Component: 3850 - total flux cleaned = -0.00345373 Jy ! Component: 3900 - total flux cleaned = -0.00345378 Jy ! Component: 3950 - total flux cleaned = -0.00347752 Jy ! Component: 4000 - total flux cleaned = -0.0034775 Jy ! Component: 4050 - total flux cleaned = -0.00345391 Jy ! Total flux subtracted in 4096 components = -0.00348924 Jy ! Clean residual min=-0.000733 max=0.000797 Jy/beam ! Clean residual mean=-0.000003 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.108051 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 332 components and 0.108051 Jy ![Exited script file: muppet] wmap "J1839-2920_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.171 x 16.96 at -21.44 degrees (North through East) ! Clean map min=-0.0023552 max=0.092953 Jy/beam ! Writing clean map to FITS file: J1839-2920_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0929533 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210303 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.678739 0.678739 1.35748 2.71495 5.42991 10.8598 21.7196 43.4393 86.8785 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.171 x 16.96 at -21.44 degrees (North through East) ! Clean map min=-0.0023552 max=0.092953 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1839-2920_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:18:00 2019