! Started logfile: J1838+5735_S_2017_08_05_pus_uvs.log on Thu May 9 19:35:30 2019 obs J1838+5735_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1838+5735_S_2017_08_05_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.966277 visibilities/baseline/integration-bin. ! Found source: J1838+5735 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 19828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1838+5735_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 699 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.948307Jy sigma=0.009214 ! Fit after self-cal, rms=0.939572Jy sigma=0.009140 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=4.266 mas, bpa=-8.247 degrees ! Estimated noise=968.434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473396 Jy ! Component: 100 - total flux cleaned = 0.0584444 Jy ! Total flux subtracted in 100 components = 0.0584444 Jy ! Clean residual min=-0.003611 max=0.004259 Jy/beam ! Clean residual mean=0.000003 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.0584444 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0584444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074574Jy sigma=0.000674 ! Fit after self-cal, rms=0.074529Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.719 mas, bmaj=5.089 mas, bpa=-11.63 degrees ! Estimated noise=596.185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00591984 Jy ! Component: 100 - total flux cleaned = 0.008475 Jy ! Component: 150 - total flux cleaned = 0.00975106 Jy ! Component: 200 - total flux cleaned = 0.0101804 Jy ! Total flux subtracted in 200 components = 0.0101804 Jy ! Clean residual min=-0.002432 max=0.002461 Jy/beam ! Clean residual mean=-0.000002 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0686248 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.0686248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074057Jy sigma=0.000670 ! Fit after self-cal, rms=0.074044Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.18 KP 1.02 ! LA 1.02 MK 1.00 NL 0.91 OV 1.00 ! PT 0.98 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.08 HN 1.00 KP 0.98 ! LA 0.97 MK 1.09 NL 0.97 OV 1.01 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.10 HN 1.02 KP 0.86 ! LA 0.76 MK 1.04 NL 1.20 OV 0.99 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.96 KP 1.00* ! LA 0.76 MK 0.78 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.074044Jy sigma=0.000670 ! Fit after self-cal, rms=0.072248Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=5.125 mas, bpa=-10.47 degrees ! Estimated noise=594.785 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000537713 Jy ! Component: 100 - total flux cleaned = -0.000725456 Jy ! Component: 150 - total flux cleaned = -0.000880745 Jy ! Component: 200 - total flux cleaned = -0.000975162 Jy ! Total flux subtracted in 200 components = -0.000975162 Jy ! Clean residual min=-0.001918 max=0.001839 Jy/beam ! Clean residual mean=-0.000003 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0676496 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0676496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072228Jy sigma=0.000666 ! Fit after self-cal, rms=0.072190Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072190Jy sigma=0.000666 ! Fit after self-cal, rms=0.075443Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.735 mas, bmaj=5.15 mas, bpa=-10.5 degrees ! Estimated noise=593.824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000485083 Jy ! Component: 100 - total flux cleaned = -0.000485468 Jy ! Component: 150 - total flux cleaned = -0.000485396 Jy ! Component: 200 - total flux cleaned = -0.00047421 Jy ! Total flux subtracted in 200 components = -0.00047421 Jy ! Clean residual min=-0.001696 max=0.001627 Jy/beam ! Clean residual mean=0.000003 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0671754 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0671754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075435Jy sigma=0.000663 ! Fit after self-cal, rms=0.075563Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.94205e-05 Jy ! Component: 100 - total flux cleaned = -2.89256e-05 Jy ! Component: 150 - total flux cleaned = -2.88897e-05 Jy ! Component: 200 - total flux cleaned = -2.90176e-05 Jy ! Total flux subtracted in 200 components = -2.90176e-05 Jy ! Clean residual min=-0.001693 max=0.001626 Jy/beam ! Clean residual mean=0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0671464 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0671464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075560Jy sigma=0.000663 ! Fit after self-cal, rms=0.075561Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075561Jy sigma=0.000663 ! Fit after self-cal, rms=0.077080Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.727 mas, bmaj=5.181 mas, bpa=-10.75 degrees ! Estimated noise=594.466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279842 Jy ! Component: 100 - total flux cleaned = -0.000279205 Jy ! Component: 150 - total flux cleaned = -0.000257144 Jy ! Component: 200 - total flux cleaned = -0.000247267 Jy ! Total flux subtracted in 200 components = -0.000247267 Jy ! Clean residual min=-0.001714 max=0.001616 Jy/beam ! Clean residual mean=0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0668991 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.0668991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077075Jy sigma=0.000663 ! Fit after self-cal, rms=0.077096Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.18093e-06 Jy ! Component: 100 - total flux cleaned = -2.12297e-07 Jy ! Component: 150 - total flux cleaned = 5.34806e-08 Jy ! Component: 200 - total flux cleaned = 2.40923e-07 Jy ! Total flux subtracted in 200 components = 2.40923e-07 Jy ! Clean residual min=-0.001710 max=0.001622 Jy/beam ! Clean residual mean=0.000002 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0668994 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0668994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077094Jy sigma=0.000663 ! Fit after self-cal, rms=0.077095Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077095Jy sigma=0.000663 ! Fit after self-cal, rms=0.077457Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.166 mas, bmaj=8.891 mas, bpa=-11.22 degrees ! Estimated noise=735.514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293141 Jy ! Component: 100 - total flux cleaned = 0.000256477 Jy ! Component: 150 - total flux cleaned = 0.000228592 Jy ! Component: 200 - total flux cleaned = 0.000213311 Jy ! Total flux subtracted in 200 components = 0.000213311 Jy ! Clean residual min=-0.001492 max=0.001522 Jy/beam ! Clean residual mean=0.000005 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0671127 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.0671127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077459Jy sigma=0.000663 ! Fit after self-cal, rms=0.077463Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.77922e-05 Jy ! Component: 100 - total flux cleaned = 2.90465e-05 Jy ! Component: 150 - total flux cleaned = 2.14544e-05 Jy ! Component: 200 - total flux cleaned = 8.91227e-06 Jy ! Total flux subtracted in 200 components = 8.91227e-06 Jy ! Clean residual min=-0.001510 max=0.001532 Jy/beam ! Clean residual mean=0.000004 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0671216 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.0671216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077466Jy sigma=0.000663 ! Fit after self-cal, rms=0.077465Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=5.201 mas, bpa=-10.9 degrees ! Estimated noise=594.829 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.724 x 5.201 at -10.9 degrees (North through East) ! Clean map min=-0.0016137 max=0.061648 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=4.32 mas, bpa=-7.001 degrees ! Estimated noise=970.283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472311 Jy ! Component: 100 - total flux cleaned = 0.0588655 Jy ! Component: 150 - total flux cleaned = 0.0636191 Jy ! Component: 200 - total flux cleaned = 0.0658393 Jy ! Total flux subtracted in 200 components = 0.0658393 Jy ! Clean residual min=-0.002851 max=0.003139 Jy/beam ! Clean residual mean=0.000002 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.0658393 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0658393 Jy ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=5.201 mas, bpa=-10.9 degrees ! Estimated noise=594.829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176947 Jy ! Component: 100 - total flux cleaned = 0.00186589 Jy ! Component: 150 - total flux cleaned = 0.00194418 Jy ! Component: 200 - total flux cleaned = 0.00200753 Jy ! Total flux subtracted in 200 components = 0.00200753 Jy ! Clean residual min=-0.001634 max=0.001630 Jy/beam ! Clean residual mean=0.000002 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0678469 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.0678468 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.166 mas, bmaj=8.891 mas, bpa=-11.22 degrees ! Estimated noise=735.514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.90104e-05 Jy ! Component: 100 - total flux cleaned = 2.45446e-06 Jy ! Component: 150 - total flux cleaned = -2.97371e-05 Jy ! Component: 200 - total flux cleaned = -5.78931e-05 Jy ! Total flux subtracted in 200 components = -5.78931e-05 Jy ! Clean residual min=-0.001496 max=0.001567 Jy/beam ! Clean residual mean=0.000004 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.067789 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.48626e-05 Jy ! Component: 100 - total flux cleaned = -4.71492e-05 Jy ! Component: 150 - total flux cleaned = -7.40552e-05 Jy ! Component: 200 - total flux cleaned = -9.25748e-05 Jy ! Total flux subtracted in 200 components = -9.25748e-05 Jy ! Clean residual min=-0.001497 max=0.001556 Jy/beam ! Clean residual mean=0.000004 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0676964 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 60 components and 0.0676964 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=5.201 mas, bpa=-10.9 degrees ! Estimated noise=594.829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.34487e-05 Jy ! Component: 100 - total flux cleaned = -8.35177e-05 Jy ! Component: 150 - total flux cleaned = -0.000102209 Jy ! Component: 200 - total flux cleaned = -0.000102394 Jy ! Total flux subtracted in 200 components = -0.000102394 Jy ! Clean residual min=-0.001615 max=0.001653 Jy/beam ! Clean residual mean=0.000002 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.067594 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.067594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077445Jy sigma=0.000663 ! Fit after self-cal, rms=0.077440Jy sigma=0.000663 wmodel J1838+5735_S_2017_08_05_pus_map.mod ! Writing 69 model components to file: J1838+5735_S_2017_08_05_pus_map.mod wobs J1838+5735_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1838+5735_S_2017_08_05_pus_uvs.fits wwins J1838+5735_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1838+5735_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117545 Jy ! Component: 100 - total flux cleaned = 0.000199879 Jy ! Component: 150 - total flux cleaned = 0.000251421 Jy ! Component: 200 - total flux cleaned = 0.000324609 Jy ! Component: 250 - total flux cleaned = 0.000442918 Jy ! Component: 300 - total flux cleaned = 0.000558692 Jy ! Component: 350 - total flux cleaned = 0.000717257 Jy ! Component: 400 - total flux cleaned = 0.000849955 Jy ! Component: 450 - total flux cleaned = 0.00100095 Jy ! Component: 500 - total flux cleaned = 0.00114824 Jy ! Component: 550 - total flux cleaned = 0.00125131 Jy ! Component: 600 - total flux cleaned = 0.00135236 Jy ! Component: 650 - total flux cleaned = 0.00141185 Jy ! Component: 700 - total flux cleaned = 0.0014319 Jy ! Component: 750 - total flux cleaned = 0.0015279 Jy ! Component: 800 - total flux cleaned = 0.00150886 Jy ! Component: 850 - total flux cleaned = 0.0015276 Jy ! Component: 900 - total flux cleaned = 0.00154591 Jy ! Component: 950 - total flux cleaned = 0.00154566 Jy ! Component: 1000 - total flux cleaned = 0.00159953 Jy ! Component: 1050 - total flux cleaned = 0.00165249 Jy ! Component: 1100 - total flux cleaned = 0.00172177 Jy ! Component: 1150 - total flux cleaned = 0.00179034 Jy ! Component: 1200 - total flux cleaned = 0.0018071 Jy ! Component: 1250 - total flux cleaned = 0.00180721 Jy ! Component: 1300 - total flux cleaned = 0.00184047 Jy ! Component: 1350 - total flux cleaned = 0.00190603 Jy ! Component: 1400 - total flux cleaned = 0.00197088 Jy ! Component: 1450 - total flux cleaned = 0.00201921 Jy ! Component: 1500 - total flux cleaned = 0.00209866 Jy ! Component: 1550 - total flux cleaned = 0.00213019 Jy ! Component: 1600 - total flux cleaned = 0.0021769 Jy ! Component: 1650 - total flux cleaned = 0.00230038 Jy ! Component: 1700 - total flux cleaned = 0.00233075 Jy ! Component: 1750 - total flux cleaned = 0.00239122 Jy ! Component: 1800 - total flux cleaned = 0.00243605 Jy ! Component: 1850 - total flux cleaned = 0.00255493 Jy ! Component: 1900 - total flux cleaned = 0.00256967 Jy ! Component: 1950 - total flux cleaned = 0.00264244 Jy ! Component: 2000 - total flux cleaned = 0.00264244 Jy ! Component: 2050 - total flux cleaned = 0.00268541 Jy ! Component: 2100 - total flux cleaned = 0.00268577 Jy ! Component: 2150 - total flux cleaned = 0.00272807 Jy ! Component: 2200 - total flux cleaned = 0.00275622 Jy ! Component: 2250 - total flux cleaned = 0.00281166 Jy ! Component: 2300 - total flux cleaned = 0.00285269 Jy ! Component: 2350 - total flux cleaned = 0.00283906 Jy ! Component: 2400 - total flux cleaned = 0.00293348 Jy ! Component: 2450 - total flux cleaned = 0.0029068 Jy ! Component: 2500 - total flux cleaned = 0.00296005 Jy ! Component: 2550 - total flux cleaned = 0.00299965 Jy ! Component: 2600 - total flux cleaned = 0.00303865 Jy ! Component: 2650 - total flux cleaned = 0.00310327 Jy ! Component: 2700 - total flux cleaned = 0.0030776 Jy ! Component: 2750 - total flux cleaned = 0.00312866 Jy ! Component: 2800 - total flux cleaned = 0.00316651 Jy ! Component: 2850 - total flux cleaned = 0.00322922 Jy ! Component: 2900 - total flux cleaned = 0.0032416 Jy ! Component: 2950 - total flux cleaned = 0.00329116 Jy ! Component: 3000 - total flux cleaned = 0.00331589 Jy ! Component: 3050 - total flux cleaned = 0.00330373 Jy ! Component: 3100 - total flux cleaned = 0.00336418 Jy ! Component: 3150 - total flux cleaned = 0.00340026 Jy ! Component: 3200 - total flux cleaned = 0.00335246 Jy ! Component: 3250 - total flux cleaned = 0.00339992 Jy ! Component: 3300 - total flux cleaned = 0.00338821 Jy ! Component: 3350 - total flux cleaned = 0.00339988 Jy ! Component: 3400 - total flux cleaned = 0.00344652 Jy ! Component: 3450 - total flux cleaned = 0.00342335 Jy ! Component: 3500 - total flux cleaned = 0.00345785 Jy ! Component: 3550 - total flux cleaned = 0.0035264 Jy ! Component: 3600 - total flux cleaned = 0.00353771 Jy ! Component: 3650 - total flux cleaned = 0.00358277 Jy ! Component: 3700 - total flux cleaned = 0.00364996 Jy ! Component: 3750 - total flux cleaned = 0.0036164 Jy ! Component: 3800 - total flux cleaned = 0.00368279 Jy ! Component: 3850 - total flux cleaned = 0.00370484 Jy ! Component: 3900 - total flux cleaned = 0.00368293 Jy ! Component: 3950 - total flux cleaned = 0.00371562 Jy ! Component: 4000 - total flux cleaned = 0.00372646 Jy ! Component: 4050 - total flux cleaned = 0.00379094 Jy ! Total flux subtracted in 4096 components = 0.00382299 Jy ! Clean residual min=-0.000658 max=0.000641 Jy/beam ! Clean residual mean=-0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.071417 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 343 components and 0.0714169 Jy ![Exited script file: muppet] wmap "J1838+5735_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.724 x 5.201 at -10.9 degrees (North through East) ! Clean map min=-0.0011546 max=0.061474 Jy/beam ! Writing clean map to FITS file: J1838+5735_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.061474 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000189827 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.926378 0.926378 1.85276 3.70551 7.41102 14.822 29.6441 59.2882 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.724 x 5.201 at -10.9 degrees (North through East) ! Clean map min=-0.0011546 max=0.061474 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1838+5735_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:35:35 2019