! Started logfile: J1837-1532_S_2017_09_26_pus_uvs.log on Sat May 11 13:05:07 2019 obs J1837-1532_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1837-1532_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.399187 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1837-1532 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 16900 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1837-1532_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 968 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2277 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.976659Jy sigma=0.007464 ! Fit after self-cal, rms=0.942193Jy sigma=0.007189 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=17.52 mas, bpa=-25.31 degrees ! Estimated noise=1521.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441438 Jy ! Component: 100 - total flux cleaned = 0.0555577 Jy ! Total flux subtracted in 100 components = 0.0555577 Jy ! Clean residual min=-0.005634 max=0.006020 Jy/beam ! Clean residual mean=-0.000084 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.0555577 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0555577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088581Jy sigma=0.000640 ! Fit after self-cal, rms=0.087665Jy sigma=0.000634 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.516 mas, bmaj=20.7 mas, bpa=-23.58 degrees ! Estimated noise=847.608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010522 Jy ! Component: 100 - total flux cleaned = 0.016147 Jy ! Component: 150 - total flux cleaned = 0.0194685 Jy ! Component: 200 - total flux cleaned = 0.0211674 Jy ! Total flux subtracted in 200 components = 0.0211674 Jy ! Clean residual min=-0.003098 max=0.004857 Jy/beam ! Clean residual mean=-0.000043 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.0767251 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 70 components and 0.0767251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086389Jy sigma=0.000624 ! Fit after self-cal, rms=0.086260Jy sigma=0.000623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.99 KP 1.05 ! LA 1.00 MK 0.85 NL 0.97 OV 1.24 ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.16 KP 1.01 ! LA 0.92 MK 0.84 NL 1.06 OV 1.18 ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.01 KP 0.99 ! LA 0.95 MK 0.95 NL 0.95 OV 1.13 ! PT 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 0.93 KP 1.00* ! LA 1.00* MK 1.18 NL 1.00* OV 0.98 ! PT 1.02 ! ! ! Fit before self-cal, rms=0.086260Jy sigma=0.000623 ! Fit after self-cal, rms=0.085093Jy sigma=0.000621 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.436 mas, bmaj=21.03 mas, bpa=-24.27 degrees ! Estimated noise=847.614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129382 Jy ! Component: 100 - total flux cleaned = 0.00151396 Jy ! Component: 150 - total flux cleaned = 0.00165598 Jy ! Component: 200 - total flux cleaned = 0.00169959 Jy ! Total flux subtracted in 200 components = 0.00169959 Jy ! Clean residual min=-0.002834 max=0.003890 Jy/beam ! Clean residual mean=-0.000022 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.0784247 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.0784247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085029Jy sigma=0.000620 ! Fit after self-cal, rms=0.085067Jy sigma=0.000619 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085067Jy sigma=0.000619 ! Fit after self-cal, rms=0.084939Jy sigma=0.000618 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.344 mas, bmaj=21.03 mas, bpa=-24.46 degrees ! Estimated noise=845.914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000969369 Jy ! Component: 100 - total flux cleaned = 0.00111384 Jy ! Component: 150 - total flux cleaned = 0.00115311 Jy ! Component: 200 - total flux cleaned = 0.00111895 Jy ! Total flux subtracted in 200 components = 0.00111895 Jy ! Clean residual min=-0.002565 max=0.003171 Jy/beam ! Clean residual mean=-0.000008 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0795436 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.0795437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084890Jy sigma=0.000618 ! Fit after self-cal, rms=0.084946Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, -74.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227281 Jy ! Component: 100 - total flux cleaned = 0.00210278 Jy ! Component: 150 - total flux cleaned = 0.00188545 Jy ! Component: 200 - total flux cleaned = 0.00183761 Jy ! Total flux subtracted in 200 components = 0.00183761 Jy ! Clean residual min=-0.002023 max=0.002715 Jy/beam ! Clean residual mean=-0.000009 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0813813 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.0813813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084813Jy sigma=0.000617 ! Fit after self-cal, rms=0.084751Jy sigma=0.000616 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084751Jy sigma=0.000616 ! Fit after self-cal, rms=0.083827Jy sigma=0.000616 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.286 mas, bmaj=20.94 mas, bpa=-24.52 degrees ! Estimated noise=838.711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123715 Jy ! Component: 100 - total flux cleaned = 0.00140888 Jy ! Component: 150 - total flux cleaned = 0.00141587 Jy ! Component: 200 - total flux cleaned = 0.00123848 Jy ! Total flux subtracted in 200 components = 0.00123848 Jy ! Clean residual min=-0.001858 max=0.002327 Jy/beam ! Clean residual mean=-0.000004 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0826198 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 142 components and 0.0826198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083745Jy sigma=0.000615 ! Fit after self-cal, rms=0.083712Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798129 Jy ! Component: 100 - total flux cleaned = 0.000654767 Jy ! Component: 150 - total flux cleaned = 0.000438685 Jy ! Component: 200 - total flux cleaned = 0.000358367 Jy ! Total flux subtracted in 200 components = 0.000358367 Jy ! Clean residual min=-0.001942 max=0.002329 Jy/beam ! Clean residual mean=-0.000004 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0829781 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 156 components and 0.0829781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083657Jy sigma=0.000615 ! Fit after self-cal, rms=0.083635Jy sigma=0.000614 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083635Jy sigma=0.000614 ! Fit after self-cal, rms=0.083131Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10 mas, bmaj=27.72 mas, bpa=-14.79 degrees ! Estimated noise=947.777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00072663 Jy ! Component: 100 - total flux cleaned = 0.000726039 Jy ! Component: 150 - total flux cleaned = 0.000694265 Jy ! Component: 200 - total flux cleaned = 0.000606272 Jy ! Total flux subtracted in 200 components = 0.000606272 Jy ! Clean residual min=-0.001452 max=0.001807 Jy/beam ! Clean residual mean=-0.000006 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0835844 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 182 components and 0.0835844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083099Jy sigma=0.000614 ! Fit after self-cal, rms=0.083089Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.48887e-05 Jy ! Component: 100 - total flux cleaned = 3.31915e-05 Jy ! Component: 150 - total flux cleaned = -4.82897e-05 Jy ! Component: 200 - total flux cleaned = -0.000173249 Jy ! Total flux subtracted in 200 components = -0.000173249 Jy ! Clean residual min=-0.001510 max=0.001746 Jy/beam ! Clean residual mean=-0.000005 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0834111 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 194 components and 0.0834111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083068Jy sigma=0.000614 ! Fit after self-cal, rms=0.083044Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.262 mas, bmaj=20.87 mas, bpa=-24.57 degrees ! Estimated noise=835.605 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.262 x 20.87 at -24.57 degrees (North through East) ! Clean map min=-0.0039177 max=0.051232 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=17.88 mas, bpa=-25.92 degrees ! Estimated noise=1452.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433776 Jy ! Component: 100 - total flux cleaned = 0.057186 Jy ! Component: 150 - total flux cleaned = 0.0662333 Jy ! Component: 200 - total flux cleaned = 0.0706322 Jy ! Total flux subtracted in 200 components = 0.0706322 Jy ! Clean residual min=-0.005404 max=0.004564 Jy/beam ! Clean residual mean=-0.000056 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.0706322 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0706322 Jy ! Inverting map and beam ! Estimated beam: bmin=4.262 mas, bmaj=20.87 mas, bpa=-24.57 degrees ! Estimated noise=835.605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063579 Jy ! Component: 100 - total flux cleaned = 0.00894415 Jy ! Component: 150 - total flux cleaned = 0.0108363 Jy ! Component: 200 - total flux cleaned = 0.0114874 Jy ! Total flux subtracted in 200 components = 0.0114874 Jy ! Clean residual min=-0.002925 max=0.002507 Jy/beam ! Clean residual mean=-0.000023 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.0821196 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 70 components and 0.0821196 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10 mas, bmaj=27.72 mas, bpa=-14.79 degrees ! Estimated noise=947.777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001039 Jy ! Component: 100 - total flux cleaned = 0.00141195 Jy ! Component: 150 - total flux cleaned = 0.00151592 Jy ! Component: 200 - total flux cleaned = 0.00147438 Jy ! Total flux subtracted in 200 components = 0.00147438 Jy ! Clean residual min=-0.002184 max=0.002269 Jy/beam ! Clean residual mean=-0.000021 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.083594 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.21777e-05 Jy ! Component: 100 - total flux cleaned = -0.000118886 Jy ! Component: 150 - total flux cleaned = -0.000187655 Jy ! Component: 200 - total flux cleaned = -0.000218316 Jy ! Total flux subtracted in 200 components = -0.000218316 Jy ! Clean residual min=-0.001906 max=0.002145 Jy/beam ! Clean residual mean=-0.000016 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0833757 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 110 components and 0.0833757 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.262 mas, bmaj=20.87 mas, bpa=-24.57 degrees ! Estimated noise=835.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.20372e-05 Jy ! Component: 100 - total flux cleaned = 8.53172e-05 Jy ! Component: 150 - total flux cleaned = -3.26055e-06 Jy ! Component: 200 - total flux cleaned = -4.40569e-05 Jy ! Total flux subtracted in 200 components = -4.40569e-05 Jy ! Clean residual min=-0.002006 max=0.002156 Jy/beam ! Clean residual mean=-0.000011 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0833317 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 130 components and 0.0833317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083072Jy sigma=0.000614 ! Fit after self-cal, rms=0.083013Jy sigma=0.000614 wmodel J1837-1532_S_2017_09_26_pus_map.mod ! Writing 130 model components to file: J1837-1532_S_2017_09_26_pus_map.mod wobs J1837-1532_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1837-1532_S_2017_09_26_pus_uvs.fits wwins J1837-1532_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J1837-1532_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.99272e-05 Jy ! Component: 100 - total flux cleaned = 0.000111127 Jy ! Component: 150 - total flux cleaned = 0.000264003 Jy ! Component: 200 - total flux cleaned = 0.000465502 Jy ! Component: 250 - total flux cleaned = 0.000628623 Jy ! Component: 300 - total flux cleaned = 0.000807128 Jy ! Component: 350 - total flux cleaned = 0.000904447 Jy ! Component: 400 - total flux cleaned = 0.00106731 Jy ! Component: 450 - total flux cleaned = 0.00113339 Jy ! Component: 500 - total flux cleaned = 0.00117568 Jy ! Component: 550 - total flux cleaned = 0.00115606 Jy ! Component: 600 - total flux cleaned = 0.0010572 Jy ! Component: 650 - total flux cleaned = 0.000961721 Jy ! Component: 700 - total flux cleaned = 0.000869767 Jy ! Component: 750 - total flux cleaned = 0.000779536 Jy ! Component: 800 - total flux cleaned = 0.000603348 Jy ! Component: 850 - total flux cleaned = 0.000466082 Jy ! Component: 900 - total flux cleaned = 0.000331448 Jy ! Component: 950 - total flux cleaned = 0.000199353 Jy ! Component: 1000 - total flux cleaned = 3.75993e-05 Jy ! Component: 1050 - total flux cleaned = -0.000152649 Jy ! Component: 1100 - total flux cleaned = -0.00030812 Jy ! Component: 1150 - total flux cleaned = -0.000445718 Jy ! Component: 1200 - total flux cleaned = -0.000580813 Jy ! Component: 1250 - total flux cleaned = -0.0007577 Jy ! Component: 1300 - total flux cleaned = -0.00091671 Jy ! Component: 1350 - total flux cleaned = -0.00105878 Jy ! Component: 1400 - total flux cleaned = -0.00114291 Jy ! Component: 1450 - total flux cleaned = -0.00125321 Jy ! Component: 1500 - total flux cleaned = -0.00133481 Jy ! Component: 1550 - total flux cleaned = -0.00144192 Jy ! Component: 1600 - total flux cleaned = -0.00153394 Jy ! Component: 1650 - total flux cleaned = -0.00161197 Jy ! Component: 1700 - total flux cleaned = -0.00171474 Jy ! Component: 1750 - total flux cleaned = -0.00180335 Jy ! Component: 1800 - total flux cleaned = -0.00190332 Jy ! Component: 1850 - total flux cleaned = -0.00197733 Jy ! Component: 1900 - total flux cleaned = -0.00203831 Jy ! Component: 1950 - total flux cleaned = -0.00213451 Jy ! Component: 2000 - total flux cleaned = -0.0022175 Jy ! Component: 2050 - total flux cleaned = -0.00227612 Jy ! Component: 2100 - total flux cleaned = -0.00236899 Jy ! Component: 2150 - total flux cleaned = -0.00243781 Jy ! Component: 2200 - total flux cleaned = -0.00252864 Jy ! Component: 2250 - total flux cleaned = -0.00259596 Jy ! Component: 2300 - total flux cleaned = -0.00265138 Jy ! Component: 2350 - total flux cleaned = -0.00267336 Jy ! Component: 2400 - total flux cleaned = -0.00271704 Jy ! Component: 2450 - total flux cleaned = -0.00280336 Jy ! Component: 2500 - total flux cleaned = -0.00283539 Jy ! Component: 2550 - total flux cleaned = -0.00290937 Jy ! Component: 2600 - total flux cleaned = -0.00294078 Jy ! Component: 2650 - total flux cleaned = -0.00299282 Jy ! Component: 2700 - total flux cleaned = -0.00305464 Jy ! Component: 2750 - total flux cleaned = -0.00311597 Jy ! Component: 2800 - total flux cleaned = -0.00314636 Jy ! Component: 2850 - total flux cleaned = -0.00321693 Jy ! Component: 2900 - total flux cleaned = -0.00326688 Jy ! Component: 2950 - total flux cleaned = -0.00334622 Jy ! Component: 3000 - total flux cleaned = -0.00339546 Jy ! Component: 3050 - total flux cleaned = -0.00348347 Jy ! Component: 3100 - total flux cleaned = -0.00353208 Jy ! Component: 3150 - total flux cleaned = -0.00359969 Jy ! Component: 3200 - total flux cleaned = -0.00363817 Jy ! Component: 3250 - total flux cleaned = -0.00370505 Jy ! Component: 3300 - total flux cleaned = -0.00375254 Jy ! Component: 3350 - total flux cleaned = -0.00380933 Jy ! Component: 3400 - total flux cleaned = -0.00386579 Jy ! Component: 3450 - total flux cleaned = -0.00392191 Jy ! Component: 3500 - total flux cleaned = -0.0039592 Jy ! Component: 3550 - total flux cleaned = -0.00399636 Jy ! Component: 3600 - total flux cleaned = -0.00403337 Jy ! Component: 3650 - total flux cleaned = -0.00408865 Jy ! Component: 3700 - total flux cleaned = -0.0041529 Jy ! Component: 3750 - total flux cleaned = -0.0042169 Jy ! Component: 3800 - total flux cleaned = -0.00425334 Jy ! Component: 3850 - total flux cleaned = -0.00431689 Jy ! Component: 3900 - total flux cleaned = -0.00437117 Jy ! Component: 3950 - total flux cleaned = -0.00441627 Jy ! Component: 4000 - total flux cleaned = -0.00448816 Jy ! Component: 4050 - total flux cleaned = -0.00450609 Jy ! Total flux subtracted in 4096 components = -0.00457759 Jy ! Clean residual min=-0.000519 max=0.000483 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0787541 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 366 components and 0.0787541 Jy ![Exited script file: muppet] wmap "J1837-1532_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.262 x 20.87 at -24.57 degrees (North through East) ! Clean map min=-0.0025874 max=0.047836 Jy/beam ! Writing clean map to FITS file: J1837-1532_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0478356 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161916 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01545 1.01545 2.0309 4.06181 8.12362 16.2472 32.4945 64.9889 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.262 x 20.87 at -24.57 degrees (North through East) ! Clean map min=-0.0025874 max=0.047836 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1837-1532_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:05:13 2019