! Started logfile: J1835-1115_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:46:50 2019 obs J1835-1115_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1835-1115_S_2017_03_27_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.464424 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1835-1115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 18224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1835-1115_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 712 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 741 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 672 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1557 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972024Jy sigma=0.007852 ! Fit after self-cal, rms=0.943311Jy sigma=0.007644 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.091 mas, bmaj=14.97 mas, bpa=1.77 degrees ! Estimated noise=1675.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445047 Jy ! Component: 100 - total flux cleaned = 0.0559696 Jy ! Total flux subtracted in 100 components = 0.0559696 Jy ! Clean residual min=-0.004331 max=0.005130 Jy/beam ! Clean residual mean=0.000015 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.0559696 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0559696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084459Jy sigma=0.000639 ! Fit after self-cal, rms=0.083984Jy sigma=0.000636 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.492 mas, bmaj=17.02 mas, bpa=8.448 degrees ! Estimated noise=750.973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00718955 Jy ! Component: 100 - total flux cleaned = 0.0102909 Jy ! Component: 150 - total flux cleaned = 0.0119575 Jy ! Component: 200 - total flux cleaned = 0.0129354 Jy ! Total flux subtracted in 200 components = 0.0129354 Jy ! Clean residual min=-0.002971 max=0.007241 Jy/beam ! Clean residual mean=0.000006 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.068905 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 81 components and 0.068905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083412Jy sigma=0.000631 ! Fit after self-cal, rms=0.083409Jy sigma=0.000631 ! Inverting map ! Added new window around map position (19.5, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615847 Jy ! Component: 100 - total flux cleaned = 0.00904051 Jy ! Component: 150 - total flux cleaned = 0.0109719 Jy ! Component: 200 - total flux cleaned = 0.0124077 Jy ! Total flux subtracted in 200 components = 0.0124077 Jy ! Clean residual min=-0.002319 max=0.002603 Jy/beam ! Clean residual mean=0.000002 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0813127 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 143 components and 0.0813127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083043Jy sigma=0.000626 ! Fit after self-cal, rms=0.082935Jy sigma=0.000625 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305941 Jy ! Component: 100 - total flux cleaned = 0.00469874 Jy ! Component: 150 - total flux cleaned = 0.00582216 Jy ! Component: 200 - total flux cleaned = 0.00651301 Jy ! Total flux subtracted in 200 components = 0.00651301 Jy ! Clean residual min=-0.001963 max=0.001792 Jy/beam ! Clean residual mean=0.000002 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0878257 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 190 components and 0.0878257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082836Jy sigma=0.000624 ! Fit after self-cal, rms=0.082817Jy sigma=0.000623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.94 KP 1.03 ! LA 0.98 MK 1.00* NL 0.99 OV 1.11 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.84 KP 1.03 ! LA 0.95 MK 1.00* NL 1.04 OV 1.07 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.86 KP 0.99 ! LA 0.98 MK 1.00* NL 1.03 OV 0.99 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 0.59 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.082817Jy sigma=0.000623 ! Fit after self-cal, rms=0.080388Jy sigma=0.000622 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.389 mas, bmaj=17.08 mas, bpa=7.935 degrees ! Estimated noise=745.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187605 Jy ! Component: 100 - total flux cleaned = 0.00256451 Jy ! Component: 150 - total flux cleaned = 0.00290455 Jy ! Component: 200 - total flux cleaned = 0.00301416 Jy ! Total flux subtracted in 200 components = 0.00301416 Jy ! Clean residual min=-0.001496 max=0.001636 Jy/beam ! Clean residual mean=0.000005 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0908399 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 220 components and 0.0908399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080336Jy sigma=0.000621 ! Fit after self-cal, rms=0.080287Jy sigma=0.000621 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080287Jy sigma=0.000621 ! Fit after self-cal, rms=0.080260Jy sigma=0.000620 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.351 mas, bmaj=17.08 mas, bpa=7.501 degrees ! Estimated noise=747.264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104655 Jy ! Component: 100 - total flux cleaned = 0.00156364 Jy ! Component: 150 - total flux cleaned = 0.00191646 Jy ! Component: 200 - total flux cleaned = 0.00214546 Jy ! Total flux subtracted in 200 components = 0.00214546 Jy ! Clean residual min=-0.001238 max=0.001705 Jy/beam ! Clean residual mean=0.000002 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0929854 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 245 components and 0.0929853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080232Jy sigma=0.000620 ! Fit after self-cal, rms=0.080230Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000716389 Jy ! Component: 100 - total flux cleaned = 0.000892552 Jy ! Component: 150 - total flux cleaned = 0.000935975 Jy ! Component: 200 - total flux cleaned = 0.000974899 Jy ! Total flux subtracted in 200 components = 0.000974899 Jy ! Clean residual min=-0.001181 max=0.001697 Jy/beam ! Clean residual mean=0.000002 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0939602 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 267 components and 0.0939603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080216Jy sigma=0.000620 ! Fit after self-cal, rms=0.080213Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080213Jy sigma=0.000620 ! Fit after self-cal, rms=0.080115Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.298 mas, bmaj=17.07 mas, bpa=7.209 degrees ! Estimated noise=746.163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605108 Jy ! Component: 100 - total flux cleaned = 0.000884387 Jy ! Component: 150 - total flux cleaned = 0.00107817 Jy ! Component: 200 - total flux cleaned = 0.00115487 Jy ! Total flux subtracted in 200 components = 0.00115487 Jy ! Clean residual min=-0.001221 max=0.001655 Jy/beam ! Clean residual mean=0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0951151 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 286 components and 0.0951151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080101Jy sigma=0.000619 ! Fit after self-cal, rms=0.080116Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (73.5, 56). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000939189 Jy ! Component: 100 - total flux cleaned = 0.000744656 Jy ! Component: 150 - total flux cleaned = 0.000827054 Jy ! Component: 200 - total flux cleaned = 0.000903153 Jy ! Total flux subtracted in 200 components = 0.000903153 Jy ! Clean residual min=-0.001263 max=0.001321 Jy/beam ! Clean residual mean=0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0960183 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 305 components and 0.0960183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080086Jy sigma=0.000619 ! Fit after self-cal, rms=0.080075Jy sigma=0.000619 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080075Jy sigma=0.000619 ! Fit after self-cal, rms=0.079945Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.24 mas, bmaj=18.32 mas, bpa=11.53 degrees ! Estimated noise=758.855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275691 Jy ! Component: 100 - total flux cleaned = 0.000350329 Jy ! Component: 150 - total flux cleaned = 0.000392748 Jy ! Component: 200 - total flux cleaned = 0.000451257 Jy ! Total flux subtracted in 200 components = 0.000451257 Jy ! Clean residual min=-0.001050 max=0.001040 Jy/beam ! Clean residual mean=0.000003 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.0964695 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 325 components and 0.0964695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079929Jy sigma=0.000619 ! Fit after self-cal, rms=0.079934Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.39595e-05 Jy ! Component: 100 - total flux cleaned = 3.78448e-05 Jy ! Component: 150 - total flux cleaned = 0.00014983 Jy ! Component: 200 - total flux cleaned = 0.000166937 Jy ! Total flux subtracted in 200 components = 0.000166937 Jy ! Clean residual min=-0.001025 max=0.001047 Jy/beam ! Clean residual mean=0.000003 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.0966365 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 337 components and 0.0966365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079924Jy sigma=0.000618 ! Fit after self-cal, rms=0.079925Jy sigma=0.000618 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.246 mas, bmaj=17.06 mas, bpa=6.956 degrees ! Estimated noise=744.579 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.246 x 17.06 at 6.956 degrees (North through East) ! Clean map min=-0.0018216 max=0.059226 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.812 mas, bmaj=15.23 mas, bpa=0.8196 degrees ! Estimated noise=1605.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420014 Jy ! Component: 100 - total flux cleaned = 0.0554448 Jy ! Component: 150 - total flux cleaned = 0.0642342 Jy ! Component: 200 - total flux cleaned = 0.0706525 Jy ! Total flux subtracted in 200 components = 0.0706525 Jy ! Clean residual min=-0.004179 max=0.004083 Jy/beam ! Clean residual mean=0.000010 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.0706525 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.0706525 Jy ! Inverting map and beam ! Estimated beam: bmin=8.246 mas, bmaj=17.06 mas, bpa=6.956 degrees ! Estimated noise=744.579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683448 Jy ! Component: 100 - total flux cleaned = 0.0116258 Jy ! Component: 150 - total flux cleaned = 0.0152464 Jy ! Component: 200 - total flux cleaned = 0.0177491 Jy ! Total flux subtracted in 200 components = 0.0177491 Jy ! Clean residual min=-0.002066 max=0.001886 Jy/beam ! Clean residual mean=0.000004 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0884015 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 123 components and 0.0884016 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.24 mas, bmaj=18.32 mas, bpa=11.53 degrees ! Estimated noise=758.855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213618 Jy ! Component: 100 - total flux cleaned = 0.00335188 Jy ! Component: 150 - total flux cleaned = 0.00430075 Jy ! Component: 200 - total flux cleaned = 0.00481988 Jy ! Total flux subtracted in 200 components = 0.00481988 Jy ! Clean residual min=-0.001414 max=0.001210 Jy/beam ! Clean residual mean=0.000004 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0932214 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494283 Jy ! Component: 100 - total flux cleaned = 0.000704339 Jy ! Component: 150 - total flux cleaned = 0.00101088 Jy ! Component: 200 - total flux cleaned = 0.00125283 Jy ! Total flux subtracted in 200 components = 0.00125283 Jy ! Clean residual min=-0.001159 max=0.001082 Jy/beam ! Clean residual mean=0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0944743 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 206 components and 0.0944743 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.246 mas, bmaj=17.06 mas, bpa=6.956 degrees ! Estimated noise=744.579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309981 Jy ! Component: 100 - total flux cleaned = 0.000479248 Jy ! Component: 150 - total flux cleaned = 0.00051057 Jy ! Component: 200 - total flux cleaned = 0.000539609 Jy ! Total flux subtracted in 200 components = 0.000539609 Jy ! Clean residual min=-0.001328 max=0.001316 Jy/beam ! Clean residual mean=0.000002 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0950139 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 246 components and 0.0950139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079950Jy sigma=0.000619 ! Fit after self-cal, rms=0.079927Jy sigma=0.000619 wmodel J1835-1115_S_2017_03_27_pus_map.mod ! Writing 246 model components to file: J1835-1115_S_2017_03_27_pus_map.mod wobs J1835-1115_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1835-1115_S_2017_03_27_pus_uvs.fits wwins J1835-1115_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J1835-1115_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164264 Jy ! Component: 100 - total flux cleaned = -0.00039039 Jy ! Component: 150 - total flux cleaned = -0.000577563 Jy ! Component: 200 - total flux cleaned = -0.000772742 Jy ! Component: 250 - total flux cleaned = -0.000925945 Jy ! Component: 300 - total flux cleaned = -0.000991957 Jy ! Component: 350 - total flux cleaned = -0.00100778 Jy ! Component: 400 - total flux cleaned = -0.00102296 Jy ! Component: 450 - total flux cleaned = -0.00102278 Jy ! Component: 500 - total flux cleaned = -0.00105254 Jy ! Component: 550 - total flux cleaned = -0.00109627 Jy ! Component: 600 - total flux cleaned = -0.00111029 Jy ! Component: 650 - total flux cleaned = -0.00108184 Jy ! Component: 700 - total flux cleaned = -0.000998533 Jy ! Component: 750 - total flux cleaned = -0.000984617 Jy ! Component: 800 - total flux cleaned = -0.000997987 Jy ! Component: 850 - total flux cleaned = -0.000984912 Jy ! Component: 900 - total flux cleaned = -0.000984778 Jy ! Component: 950 - total flux cleaned = -0.00095916 Jy ! Component: 1000 - total flux cleaned = -0.000971882 Jy ! Component: 1050 - total flux cleaned = -0.00100926 Jy ! Component: 1100 - total flux cleaned = -0.000997332 Jy ! Component: 1150 - total flux cleaned = -0.00105749 Jy ! Component: 1200 - total flux cleaned = -0.00108117 Jy ! Component: 1250 - total flux cleaned = -0.00108098 Jy ! Component: 1300 - total flux cleaned = -0.00109267 Jy ! Component: 1350 - total flux cleaned = -0.00117239 Jy ! Component: 1400 - total flux cleaned = -0.00116114 Jy ! Component: 1450 - total flux cleaned = -0.0012056 Jy ! Component: 1500 - total flux cleaned = -0.00117279 Jy ! Component: 1550 - total flux cleaned = -0.00121615 Jy ! Component: 1600 - total flux cleaned = -0.0012267 Jy ! Component: 1650 - total flux cleaned = -0.00122669 Jy ! Component: 1700 - total flux cleaned = -0.00127868 Jy ! Component: 1750 - total flux cleaned = -0.00127852 Jy ! Component: 1800 - total flux cleaned = -0.00126836 Jy ! Component: 1850 - total flux cleaned = -0.00132853 Jy ! Component: 1900 - total flux cleaned = -0.00131841 Jy ! Component: 1950 - total flux cleaned = -0.00136725 Jy ! Component: 2000 - total flux cleaned = -0.00136728 Jy ! Component: 2050 - total flux cleaned = -0.0014248 Jy ! Component: 2100 - total flux cleaned = -0.00138691 Jy ! Component: 2150 - total flux cleaned = -0.00141516 Jy ! Component: 2200 - total flux cleaned = -0.00138722 Jy ! Component: 2250 - total flux cleaned = -0.00141486 Jy ! Component: 2300 - total flux cleaned = -0.00142395 Jy ! Component: 2350 - total flux cleaned = -0.00139677 Jy ! Component: 2400 - total flux cleaned = -0.00141463 Jy ! Component: 2450 - total flux cleaned = -0.00141474 Jy ! Component: 2500 - total flux cleaned = -0.00142358 Jy ! Component: 2550 - total flux cleaned = -0.00141493 Jy ! Component: 2600 - total flux cleaned = -0.00141498 Jy ! Component: 2650 - total flux cleaned = -0.00143216 Jy ! Component: 2700 - total flux cleaned = -0.00142366 Jy ! Component: 2750 - total flux cleaned = -0.0014068 Jy ! Component: 2800 - total flux cleaned = -0.00140677 Jy ! Component: 2850 - total flux cleaned = -0.00143161 Jy ! Component: 2900 - total flux cleaned = -0.00139881 Jy ! Component: 2950 - total flux cleaned = -0.00142309 Jy ! Component: 3000 - total flux cleaned = -0.00140702 Jy ! Component: 3050 - total flux cleaned = -0.00143901 Jy ! Component: 3100 - total flux cleaned = -0.00140719 Jy ! Component: 3150 - total flux cleaned = -0.00143084 Jy ! Component: 3200 - total flux cleaned = -0.00142295 Jy ! Component: 3250 - total flux cleaned = -0.00141523 Jy ! Component: 3300 - total flux cleaned = -0.00142298 Jy ! Component: 3350 - total flux cleaned = -0.0014459 Jy ! Component: 3400 - total flux cleaned = -0.00146105 Jy ! Component: 3450 - total flux cleaned = -0.00146862 Jy ! Component: 3500 - total flux cleaned = -0.00147606 Jy ! Component: 3550 - total flux cleaned = -0.00149088 Jy ! Component: 3600 - total flux cleaned = -0.00150559 Jy ! Component: 3650 - total flux cleaned = -0.00152021 Jy ! Component: 3700 - total flux cleaned = -0.00152021 Jy ! Component: 3750 - total flux cleaned = -0.00154895 Jy ! Component: 3800 - total flux cleaned = -0.0015347 Jy ! Component: 3850 - total flux cleaned = -0.00153474 Jy ! Component: 3900 - total flux cleaned = -0.00154893 Jy ! Component: 3950 - total flux cleaned = -0.00157003 Jy ! Component: 4000 - total flux cleaned = -0.00161181 Jy ! Component: 4050 - total flux cleaned = -0.00158404 Jy ! Total flux subtracted in 4096 components = -0.00158408 Jy ! Clean residual min=-0.000407 max=0.000373 Jy/beam ! Clean residual mean=-0.000000 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.0934298 Jy keep ! Adding 347 model components to the UV plane model. ! The established model now contains 593 components and 0.0934298 Jy ![Exited script file: muppet] wmap "J1835-1115_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.246 x 17.06 at 6.956 degrees (North through East) ! Clean map min=-0.0015084 max=0.058774 Jy/beam ! Writing clean map to FITS file: J1835-1115_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0587738 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000143514 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.732542 0.732542 1.46508 2.93017 5.86033 11.7207 23.4413 46.8827 93.7654 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.246 x 17.06 at 6.956 degrees (North through East) ! Clean map min=-0.0015084 max=0.058774 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1835-1115_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:46:56 2019