! Started logfile: J1835+2506_S_2017_09_26_pus_uvs.log on Sat May 11 13:05:01 2019 obs J1835+2506_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1835+2506_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.875 visibilities/baseline/integration-bin. ! Found source: J1835+2506 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 37044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1835+2506_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 198 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1782 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960875Jy sigma=0.008489 ! Fit after self-cal, rms=0.945016Jy sigma=0.008362 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=8.905 mas, bpa=-34.71 degrees ! Estimated noise=1133.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.044507 Jy ! Component: 100 - total flux cleaned = 0.054311 Jy ! Total flux subtracted in 100 components = 0.054311 Jy ! Clean residual min=-0.003079 max=0.003145 Jy/beam ! Clean residual mean=-0.000006 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.054311 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.054311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078024Jy sigma=0.000642 ! Fit after self-cal, rms=0.077839Jy sigma=0.000641 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.621 mas, bmaj=9.427 mas, bpa=-31.9 degrees ! Estimated noise=491.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309033 Jy ! Component: 100 - total flux cleaned = 0.00376602 Jy ! Component: 150 - total flux cleaned = 0.00380169 Jy ! Component: 200 - total flux cleaned = 0.00378212 Jy ! Total flux subtracted in 200 components = 0.00378212 Jy ! Clean residual min=-0.001199 max=0.001208 Jy/beam ! Clean residual mean=-0.000002 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.0580931 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.0580931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077696Jy sigma=0.000640 ! Fit after self-cal, rms=0.077679Jy sigma=0.000640 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.02 KP 1.05 ! LA 1.01 MK 0.95 NL 0.89 OV 1.07 ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.03 KP 1.00 ! LA 0.96 MK 1.03 NL 1.08 OV 1.13 ! PT 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.05 HN 1.00 KP 0.96 ! LA 0.99 MK 1.07 NL 1.02 OV 0.93 ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.92 KP 1.00* ! LA 0.91 MK 1.00* NL 1.00* OV 0.88 ! PT 1.02 ! ! ! Fit before self-cal, rms=0.077679Jy sigma=0.000640 ! Fit after self-cal, rms=0.076509Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.635 mas, bmaj=9.388 mas, bpa=-31.51 degrees ! Estimated noise=494.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396801 Jy ! Component: 100 - total flux cleaned = 0.000481752 Jy ! Component: 150 - total flux cleaned = 0.000499715 Jy ! Component: 200 - total flux cleaned = 0.000516291 Jy ! Total flux subtracted in 200 components = 0.000516291 Jy ! Clean residual min=-0.001261 max=0.001063 Jy/beam ! Clean residual mean=-0.000002 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0586094 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.0586094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076505Jy sigma=0.000639 ! Fit after self-cal, rms=0.076451Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076451Jy sigma=0.000639 ! Fit after self-cal, rms=0.076167Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.633 mas, bmaj=9.379 mas, bpa=-31.72 degrees ! Estimated noise=494.659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350528 Jy ! Component: 100 - total flux cleaned = 0.000393009 Jy ! Component: 150 - total flux cleaned = 0.000386107 Jy ! Component: 200 - total flux cleaned = 0.000385776 Jy ! Total flux subtracted in 200 components = 0.000385776 Jy ! Clean residual min=-0.001156 max=0.001080 Jy/beam ! Clean residual mean=-0.000003 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.0589952 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.0589952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076164Jy sigma=0.000639 ! Fit after self-cal, rms=0.076151Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.47546e-05 Jy ! Component: 100 - total flux cleaned = 2.06334e-05 Jy ! Component: 150 - total flux cleaned = 2.63384e-05 Jy ! Component: 200 - total flux cleaned = 3.6823e-05 Jy ! Total flux subtracted in 200 components = 3.6823e-05 Jy ! Clean residual min=-0.001179 max=0.001086 Jy/beam ! Clean residual mean=-0.000003 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.059032 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.059032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076151Jy sigma=0.000639 ! Fit after self-cal, rms=0.076150Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076150Jy sigma=0.000639 ! Fit after self-cal, rms=0.076196Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.63 mas, bmaj=9.373 mas, bpa=-31.81 degrees ! Estimated noise=495.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236644 Jy ! Component: 100 - total flux cleaned = 0.000276659 Jy ! Component: 150 - total flux cleaned = 0.000285633 Jy ! Component: 200 - total flux cleaned = 0.000289952 Jy ! Total flux subtracted in 200 components = 0.000289952 Jy ! Clean residual min=-0.001165 max=0.001105 Jy/beam ! Clean residual mean=-0.000003 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.059322 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.059322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076195Jy sigma=0.000639 ! Fit after self-cal, rms=0.076194Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.24976e-06 Jy ! Component: 100 - total flux cleaned = 1.36761e-05 Jy ! Component: 150 - total flux cleaned = 1.79031e-05 Jy ! Component: 200 - total flux cleaned = 2.20149e-05 Jy ! Total flux subtracted in 200 components = 2.20149e-05 Jy ! Clean residual min=-0.001165 max=0.001102 Jy/beam ! Clean residual mean=-0.000003 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.059344 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.059344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076194Jy sigma=0.000639 ! Fit after self-cal, rms=0.076194Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076194Jy sigma=0.000639 ! Fit after self-cal, rms=0.076251Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.02 mas, bmaj=11.07 mas, bpa=-28.31 degrees ! Estimated noise=563.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217751 Jy ! Component: 100 - total flux cleaned = 0.000266255 Jy ! Component: 150 - total flux cleaned = 0.000270441 Jy ! Component: 200 - total flux cleaned = 0.000277862 Jy ! Total flux subtracted in 200 components = 0.000277862 Jy ! Clean residual min=-0.001105 max=0.000995 Jy/beam ! Clean residual mean=-0.000004 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.0596219 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.0596219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076251Jy sigma=0.000639 ! Fit after self-cal, rms=0.076251Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.91589e-05 Jy ! Component: 100 - total flux cleaned = 3.5696e-05 Jy ! Component: 150 - total flux cleaned = 3.86604e-05 Jy ! Component: 200 - total flux cleaned = 4.38348e-05 Jy ! Total flux subtracted in 200 components = 4.38348e-05 Jy ! Clean residual min=-0.001106 max=0.000992 Jy/beam ! Clean residual mean=-0.000004 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.0596657 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.0596657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076251Jy sigma=0.000639 ! Fit after self-cal, rms=0.076251Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.627 mas, bmaj=9.369 mas, bpa=-31.86 degrees ! Estimated noise=495.688 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.627 x 9.369 at -31.86 degrees (North through East) ! Clean map min=-0.0011446 max=0.057154 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.546 mas, bmaj=8.882 mas, bpa=-34.53 degrees ! Estimated noise=1129.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442109 Jy ! Component: 100 - total flux cleaned = 0.0539267 Jy ! Component: 150 - total flux cleaned = 0.0564542 Jy ! Component: 200 - total flux cleaned = 0.057194 Jy ! Total flux subtracted in 200 components = 0.057194 Jy ! Clean residual min=-0.002599 max=0.002258 Jy/beam ! Clean residual mean=-0.000004 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.057194 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.057194 Jy ! Inverting map and beam ! Estimated beam: bmin=4.627 mas, bmaj=9.369 mas, bpa=-31.86 degrees ! Estimated noise=495.688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143501 Jy ! Component: 100 - total flux cleaned = 0.0020285 Jy ! Component: 150 - total flux cleaned = 0.00232516 Jy ! Component: 200 - total flux cleaned = 0.00233387 Jy ! Total flux subtracted in 200 components = 0.00233387 Jy ! Clean residual min=-0.001199 max=0.001097 Jy/beam ! Clean residual mean=-0.000003 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.0595279 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0595279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.02 mas, bmaj=11.07 mas, bpa=-28.31 degrees ! Estimated noise=563.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.27145e-05 Jy ! Component: 100 - total flux cleaned = 2.31541e-05 Jy ! Component: 150 - total flux cleaned = 3.23387e-05 Jy ! Component: 200 - total flux cleaned = 4.07935e-05 Jy ! Total flux subtracted in 200 components = 4.07935e-05 Jy ! Clean residual min=-0.001125 max=0.001001 Jy/beam ! Clean residual mean=-0.000005 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0595687 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13493e-05 Jy ! Component: 100 - total flux cleaned = 1.80923e-05 Jy ! Component: 150 - total flux cleaned = 2.75795e-05 Jy ! Component: 200 - total flux cleaned = 3.05221e-05 Jy ! Total flux subtracted in 200 components = 3.05221e-05 Jy ! Clean residual min=-0.001118 max=0.000993 Jy/beam ! Clean residual mean=-0.000004 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0595992 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.0595992 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.627 mas, bmaj=9.369 mas, bpa=-31.86 degrees ! Estimated noise=495.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109843 Jy ! Component: 100 - total flux cleaned = -0.000125796 Jy ! Component: 150 - total flux cleaned = -0.000118516 Jy ! Component: 200 - total flux cleaned = -0.000112033 Jy ! Total flux subtracted in 200 components = -0.000112033 Jy ! Clean residual min=-0.001174 max=0.001104 Jy/beam ! Clean residual mean=-0.000003 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.0594872 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.0594872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076252Jy sigma=0.000639 ! Fit after self-cal, rms=0.076253Jy sigma=0.000639 wmodel J1835+2506_S_2017_09_26_pus_map.mod ! Writing 51 model components to file: J1835+2506_S_2017_09_26_pus_map.mod wobs J1835+2506_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1835+2506_S_2017_09_26_pus_uvs.fits wwins J1835+2506_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1835+2506_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208614 Jy ! Component: 100 - total flux cleaned = -0.000156913 Jy ! Component: 150 - total flux cleaned = -8.99158e-05 Jy ! Component: 200 - total flux cleaned = 2.10898e-05 Jy ! Component: 250 - total flux cleaned = 0.000127736 Jy ! Component: 300 - total flux cleaned = 0.000245297 Jy ! Component: 350 - total flux cleaned = 0.000387118 Jy ! Component: 400 - total flux cleaned = 0.000524183 Jy ! Component: 450 - total flux cleaned = 0.000603959 Jy ! Component: 500 - total flux cleaned = 0.000707455 Jy ! Component: 550 - total flux cleaned = 0.000820312 Jy ! Component: 600 - total flux cleaned = 0.000893584 Jy ! Component: 650 - total flux cleaned = 0.000976801 Jy ! Component: 700 - total flux cleaned = 0.000988468 Jy ! Component: 750 - total flux cleaned = 0.000988862 Jy ! Component: 800 - total flux cleaned = 0.00103325 Jy ! Component: 850 - total flux cleaned = 0.00101126 Jy ! Component: 900 - total flux cleaned = 0.0010006 Jy ! Component: 950 - total flux cleaned = 0.00102167 Jy ! Component: 1000 - total flux cleaned = 0.00102157 Jy ! Component: 1050 - total flux cleaned = 0.00102155 Jy ! Component: 1100 - total flux cleaned = 0.00100188 Jy ! Component: 1150 - total flux cleaned = 0.000992206 Jy ! Component: 1200 - total flux cleaned = 0.000982459 Jy ! Component: 1250 - total flux cleaned = 0.000991924 Jy ! Component: 1300 - total flux cleaned = 0.000964048 Jy ! Component: 1350 - total flux cleaned = 0.000991697 Jy ! Component: 1400 - total flux cleaned = 0.000964522 Jy ! Component: 1450 - total flux cleaned = 0.000973619 Jy ! Component: 1500 - total flux cleaned = 0.000982631 Jy ! Component: 1550 - total flux cleaned = 0.000965185 Jy ! Component: 1600 - total flux cleaned = 0.000973762 Jy ! Component: 1650 - total flux cleaned = 0.000965259 Jy ! Component: 1700 - total flux cleaned = 0.000965319 Jy ! Component: 1750 - total flux cleaned = 0.000973452 Jy ! Component: 1800 - total flux cleaned = 0.000924145 Jy ! Component: 1850 - total flux cleaned = 0.000924197 Jy ! Component: 1900 - total flux cleaned = 0.000916179 Jy ! Component: 1950 - total flux cleaned = 0.000900248 Jy ! Component: 2000 - total flux cleaned = 0.00088451 Jy ! Component: 2050 - total flux cleaned = 0.000884509 Jy ! Component: 2100 - total flux cleaned = 0.000876816 Jy ! Component: 2150 - total flux cleaned = 0.000861594 Jy ! Component: 2200 - total flux cleaned = 0.00084659 Jy ! Component: 2250 - total flux cleaned = 0.000846477 Jy ! Component: 2300 - total flux cleaned = 0.000831754 Jy ! Component: 2350 - total flux cleaned = 0.00082444 Jy ! Component: 2400 - total flux cleaned = 0.000824476 Jy ! Component: 2450 - total flux cleaned = 0.000824378 Jy ! Component: 2500 - total flux cleaned = 0.0008597 Jy ! Component: 2550 - total flux cleaned = 0.000824399 Jy ! Component: 2600 - total flux cleaned = 0.000817413 Jy ! Component: 2650 - total flux cleaned = 0.000831224 Jy ! Component: 2700 - total flux cleaned = 0.000838069 Jy ! Component: 2750 - total flux cleaned = 0.000831231 Jy ! Component: 2800 - total flux cleaned = 0.000831266 Jy ! Component: 2850 - total flux cleaned = 0.000831275 Jy ! Component: 2900 - total flux cleaned = 0.000837932 Jy ! Component: 2950 - total flux cleaned = 0.000851192 Jy ! Component: 3000 - total flux cleaned = 0.000844571 Jy ! Component: 3050 - total flux cleaned = 0.000831528 Jy ! Component: 3100 - total flux cleaned = 0.000844539 Jy ! Component: 3150 - total flux cleaned = 0.000831646 Jy ! Component: 3200 - total flux cleaned = 0.000818772 Jy ! Component: 3250 - total flux cleaned = 0.000831485 Jy ! Component: 3300 - total flux cleaned = 0.000831448 Jy ! Component: 3350 - total flux cleaned = 0.00082515 Jy ! Component: 3400 - total flux cleaned = 0.00080642 Jy ! Component: 3450 - total flux cleaned = 0.000812601 Jy ! Component: 3500 - total flux cleaned = 0.000787973 Jy ! Component: 3550 - total flux cleaned = 0.000794137 Jy ! Component: 3600 - total flux cleaned = 0.000800207 Jy ! Component: 3650 - total flux cleaned = 0.000800242 Jy ! Component: 3700 - total flux cleaned = 0.000788115 Jy ! Component: 3750 - total flux cleaned = 0.000788178 Jy ! Component: 3800 - total flux cleaned = 0.000788195 Jy ! Component: 3850 - total flux cleaned = 0.000788186 Jy ! Component: 3900 - total flux cleaned = 0.000782335 Jy ! Component: 3950 - total flux cleaned = 0.000782375 Jy ! Component: 4000 - total flux cleaned = 0.000776544 Jy ! Component: 4050 - total flux cleaned = 0.000764973 Jy ! Total flux subtracted in 4096 components = 0.00076497 Jy ! Clean residual min=-0.000430 max=0.000327 Jy/beam ! Clean residual mean=-0.000001 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.0602521 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 360 components and 0.0602521 Jy ![Exited script file: muppet] wmap "J1835+2506_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.627 x 9.369 at -31.86 degrees (North through East) ! Clean map min=-0.00074939 max=0.057121 Jy/beam ! Writing clean map to FITS file: J1835+2506_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0571207 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000108873 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.571803 0.571803 1.14361 2.28721 4.57442 9.14885 18.2977 36.5954 73.1908 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.627 x 9.369 at -31.86 degrees (North through East) ! Clean map min=-0.00074939 max=0.057121 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1835+2506_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:05:07 2019