! Started logfile: J1834+2051_S_2017_09_26_pus_uvs.log on Sat May 11 13:04:55 2019 obs J1834+2051_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1834+2051_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.832294 visibilities/baseline/integration-bin. ! Found source: J1834+2051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 35236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1834+2051_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 298 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1626 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986226Jy sigma=0.008788 ! Fit after self-cal, rms=0.958589Jy sigma=0.008558 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=9.32 mas, bpa=-33.1 degrees ! Estimated noise=1337.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335165 Jy ! Component: 100 - total flux cleaned = 0.0410025 Jy ! Total flux subtracted in 100 components = 0.0410025 Jy ! Clean residual min=-0.004215 max=0.004492 Jy/beam ! Clean residual mean=-0.000003 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.0410025 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0410025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074897Jy sigma=0.000634 ! Fit after self-cal, rms=0.074057Jy sigma=0.000627 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.628 mas, bmaj=10.23 mas, bpa=-30.1 degrees ! Estimated noise=489.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389935 Jy ! Component: 100 - total flux cleaned = 0.0040546 Jy ! Component: 150 - total flux cleaned = 0.00397422 Jy ! Component: 200 - total flux cleaned = 0.00393952 Jy ! Total flux subtracted in 200 components = 0.00393952 Jy ! Clean residual min=-0.001755 max=0.001658 Jy/beam ! Clean residual mean=0.000001 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.044942 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.044942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073837Jy sigma=0.000625 ! Fit after self-cal, rms=0.073803Jy sigma=0.000625 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.92 HN 0.98 KP 1.00 ! LA 0.93 MK 1.01 NL 0.99 OV 1.06 ! PT 1.11 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.96 HN 0.98 KP 0.96 ! LA 0.97 MK 0.94 NL 1.07 OV 1.09 ! PT 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.99 KP 0.98 ! LA 0.92 MK 1.10 NL 1.05 OV 1.02 ! PT 1.03 ! ! ! Correcting IF 4. ! A total of 408 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 0.73 KP 1.00* ! LA 0.99 MK 1.00* NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Fit before self-cal, rms=0.073803Jy sigma=0.000625 ! Fit after self-cal, rms=0.073436Jy sigma=0.000625 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.603 mas, bmaj=10.27 mas, bpa=-29.31 degrees ! Estimated noise=493.261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.51845e-05 Jy ! Component: 100 - total flux cleaned = 9.69752e-05 Jy ! Component: 150 - total flux cleaned = 0.00012335 Jy ! Component: 200 - total flux cleaned = 0.000134416 Jy ! Total flux subtracted in 200 components = 0.000134416 Jy ! Clean residual min=-0.001204 max=0.001405 Jy/beam ! Clean residual mean=0.000000 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.0450765 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.0450765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073427Jy sigma=0.000625 ! Fit after self-cal, rms=0.073367Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073367Jy sigma=0.000625 ! Fit after self-cal, rms=0.073097Jy sigma=0.000624 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.594 mas, bmaj=10.27 mas, bpa=-29.36 degrees ! Estimated noise=492.559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184235 Jy ! Component: 100 - total flux cleaned = 0.00022655 Jy ! Component: 150 - total flux cleaned = 0.000244573 Jy ! Component: 200 - total flux cleaned = 0.000253064 Jy ! Total flux subtracted in 200 components = 0.000253064 Jy ! Clean residual min=-0.001422 max=0.001132 Jy/beam ! Clean residual mean=0.000003 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.0453295 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0453295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073094Jy sigma=0.000624 ! Fit after self-cal, rms=0.073083Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.31556e-05 Jy ! Component: 100 - total flux cleaned = -6.31437e-05 Jy ! Component: 150 - total flux cleaned = -6.32031e-05 Jy ! Component: 200 - total flux cleaned = -7.08273e-05 Jy ! Total flux subtracted in 200 components = -7.08273e-05 Jy ! Clean residual min=-0.001380 max=0.001179 Jy/beam ! Clean residual mean=0.000002 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.0452587 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0452587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073080Jy sigma=0.000624 ! Fit after self-cal, rms=0.073071Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073071Jy sigma=0.000624 ! Fit after self-cal, rms=0.073270Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.589 mas, bmaj=10.25 mas, bpa=-29.35 degrees ! Estimated noise=493.185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202557 Jy ! Component: 100 - total flux cleaned = 0.00022021 Jy ! Component: 150 - total flux cleaned = 0.000228592 Jy ! Component: 200 - total flux cleaned = 0.000250834 Jy ! Total flux subtracted in 200 components = 0.000250834 Jy ! Clean residual min=-0.001402 max=0.001092 Jy/beam ! Clean residual mean=0.000002 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.0455095 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0455095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073268Jy sigma=0.000624 ! Fit after self-cal, rms=0.073269Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.12347e-05 Jy ! Component: 100 - total flux cleaned = -3.8974e-05 Jy ! Component: 150 - total flux cleaned = -2.44932e-05 Jy ! Component: 200 - total flux cleaned = -2.46288e-05 Jy ! Total flux subtracted in 200 components = -2.46288e-05 Jy ! Clean residual min=-0.001373 max=0.001107 Jy/beam ! Clean residual mean=0.000003 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.0454849 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.0454849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073267Jy sigma=0.000624 ! Fit after self-cal, rms=0.073266Jy sigma=0.000624 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073266Jy sigma=0.000624 ! Fit after self-cal, rms=0.073415Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.883 mas, bmaj=11.84 mas, bpa=-30.05 degrees ! Estimated noise=565.767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.86769e-05 Jy ! Component: 100 - total flux cleaned = 7.99637e-05 Jy ! Component: 150 - total flux cleaned = 8.37418e-05 Jy ! Component: 200 - total flux cleaned = 8.36331e-05 Jy ! Total flux subtracted in 200 components = 8.36331e-05 Jy ! Clean residual min=-0.001552 max=0.001310 Jy/beam ! Clean residual mean=0.000004 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0455685 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.0455685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073415Jy sigma=0.000624 ! Fit after self-cal, rms=0.073414Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.84989e-05 Jy ! Component: 100 - total flux cleaned = -7.02332e-05 Jy ! Component: 150 - total flux cleaned = -7.01995e-05 Jy ! Component: 200 - total flux cleaned = -7.60056e-05 Jy ! Total flux subtracted in 200 components = -7.60056e-05 Jy ! Clean residual min=-0.001525 max=0.001307 Jy/beam ! Clean residual mean=0.000004 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0454925 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.0454925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073414Jy sigma=0.000624 ! Fit after self-cal, rms=0.073414Jy sigma=0.000624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.585 mas, bmaj=10.24 mas, bpa=-29.34 degrees ! Estimated noise=493.985 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.585 x 10.24 at -29.34 degrees (North through East) ! Clean map min=-0.0013436 max=0.045461 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=9.355 mas, bpa=-32.25 degrees ! Estimated noise=1363.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344565 Jy ! Component: 100 - total flux cleaned = 0.0423267 Jy ! Component: 150 - total flux cleaned = 0.0448777 Jy ! Component: 200 - total flux cleaned = 0.0450438 Jy ! Total flux subtracted in 200 components = 0.0450438 Jy ! Clean residual min=-0.003087 max=0.002711 Jy/beam ! Clean residual mean=0.000002 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.0450438 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0450438 Jy ! Inverting map and beam ! Estimated beam: bmin=4.585 mas, bmaj=10.24 mas, bpa=-29.34 degrees ! Estimated noise=493.985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626653 Jy ! Component: 100 - total flux cleaned = 0.00051592 Jy ! Component: 150 - total flux cleaned = 0.000381143 Jy ! Component: 200 - total flux cleaned = 0.000343851 Jy ! Total flux subtracted in 200 components = 0.000343851 Jy ! Clean residual min=-0.001383 max=0.001188 Jy/beam ! Clean residual mean=0.000002 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.0453877 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0453877 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.883 mas, bmaj=11.84 mas, bpa=-30.05 degrees ! Estimated noise=565.767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.00398e-05 Jy ! Component: 100 - total flux cleaned = 9.48034e-06 Jy ! Component: 150 - total flux cleaned = 9.56161e-06 Jy ! Component: 200 - total flux cleaned = -1.40411e-06 Jy ! Total flux subtracted in 200 components = -1.40411e-06 Jy ! Clean residual min=-0.001544 max=0.001290 Jy/beam ! Clean residual mean=0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0453863 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.95368e-06 Jy ! Component: 100 - total flux cleaned = -1.45723e-05 Jy ! Component: 150 - total flux cleaned = -1.44283e-05 Jy ! Component: 200 - total flux cleaned = -1.45364e-05 Jy ! Total flux subtracted in 200 components = -1.45364e-05 Jy ! Clean residual min=-0.001544 max=0.001295 Jy/beam ! Clean residual mean=0.000003 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0453717 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.0453717 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.585 mas, bmaj=10.24 mas, bpa=-29.34 degrees ! Estimated noise=493.985 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.04008e-05 Jy ! Component: 100 - total flux cleaned = 1.42295e-05 Jy ! Component: 150 - total flux cleaned = 1.47661e-05 Jy ! Component: 200 - total flux cleaned = -5.35038e-06 Jy ! Total flux subtracted in 200 components = -5.35038e-06 Jy ! Clean residual min=-0.001368 max=0.001143 Jy/beam ! Clean residual mean=0.000002 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.0453664 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0453664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073415Jy sigma=0.000624 ! Fit after self-cal, rms=0.073413Jy sigma=0.000624 wmodel J1834+2051_S_2017_09_26_pus_map.mod ! Writing 45 model components to file: J1834+2051_S_2017_09_26_pus_map.mod wobs J1834+2051_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1834+2051_S_2017_09_26_pus_uvs.fits wwins J1834+2051_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1834+2051_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195243 Jy ! Component: 100 - total flux cleaned = -6.03802e-05 Jy ! Component: 150 - total flux cleaned = 9.70765e-06 Jy ! Component: 200 - total flux cleaned = 1.01283e-05 Jy ! Component: 250 - total flux cleaned = 4.17455e-05 Jy ! Component: 300 - total flux cleaned = 5.71568e-05 Jy ! Component: 350 - total flux cleaned = 2.86755e-05 Jy ! Component: 400 - total flux cleaned = 2.80061e-05 Jy ! Component: 450 - total flux cleaned = 2.76961e-05 Jy ! Component: 500 - total flux cleaned = 4.0646e-05 Jy ! Component: 550 - total flux cleaned = 1.53624e-05 Jy ! Component: 600 - total flux cleaned = -2.16639e-05 Jy ! Component: 650 - total flux cleaned = -6.95122e-05 Jy ! Component: 700 - total flux cleaned = -0.000127956 Jy ! Component: 750 - total flux cleaned = -0.000196026 Jy ! Component: 800 - total flux cleaned = -0.000218241 Jy ! Component: 850 - total flux cleaned = -0.00024 Jy ! Component: 900 - total flux cleaned = -0.00024036 Jy ! Component: 950 - total flux cleaned = -0.000282123 Jy ! Component: 1000 - total flux cleaned = -0.000322557 Jy ! Component: 1050 - total flux cleaned = -0.000332207 Jy ! Component: 1100 - total flux cleaned = -0.000351883 Jy ! Component: 1150 - total flux cleaned = -0.000352038 Jy ! Component: 1200 - total flux cleaned = -0.000390034 Jy ! Component: 1250 - total flux cleaned = -0.000408708 Jy ! Component: 1300 - total flux cleaned = -0.000427042 Jy ! Component: 1350 - total flux cleaned = -0.000426965 Jy ! Component: 1400 - total flux cleaned = -0.000435951 Jy ! Component: 1450 - total flux cleaned = -0.000427356 Jy ! Component: 1500 - total flux cleaned = -0.000427484 Jy ! Component: 1550 - total flux cleaned = -0.000435978 Jy ! Component: 1600 - total flux cleaned = -0.000418951 Jy ! Component: 1650 - total flux cleaned = -0.000393908 Jy ! Component: 1700 - total flux cleaned = -0.000410388 Jy ! Component: 1750 - total flux cleaned = -0.000402356 Jy ! Component: 1800 - total flux cleaned = -0.000386286 Jy ! Component: 1850 - total flux cleaned = -0.000418224 Jy ! Component: 1900 - total flux cleaned = -0.000434005 Jy ! Component: 1950 - total flux cleaned = -0.000457444 Jy ! Component: 2000 - total flux cleaned = -0.000472772 Jy ! Component: 2050 - total flux cleaned = -0.000488019 Jy ! Component: 2100 - total flux cleaned = -0.000488146 Jy ! Component: 2150 - total flux cleaned = -0.000495638 Jy ! Component: 2200 - total flux cleaned = -0.000532526 Jy ! Component: 2250 - total flux cleaned = -0.000532471 Jy ! Component: 2300 - total flux cleaned = -0.000561435 Jy ! Component: 2350 - total flux cleaned = -0.000539916 Jy ! Component: 2400 - total flux cleaned = -0.000589744 Jy ! Component: 2450 - total flux cleaned = -0.000603878 Jy ! Component: 2500 - total flux cleaned = -0.000589903 Jy ! Component: 2550 - total flux cleaned = -0.000610788 Jy ! Component: 2600 - total flux cleaned = -0.000631371 Jy ! Component: 2650 - total flux cleaned = -0.000624599 Jy ! Component: 2700 - total flux cleaned = -0.000617945 Jy ! Component: 2750 - total flux cleaned = -0.000611268 Jy ! Component: 2800 - total flux cleaned = -0.000597925 Jy ! Component: 2850 - total flux cleaned = -0.000604479 Jy ! Component: 2900 - total flux cleaned = -0.000584836 Jy ! Component: 2950 - total flux cleaned = -0.000591366 Jy ! Component: 3000 - total flux cleaned = -0.000559172 Jy ! Component: 3050 - total flux cleaned = -0.000571995 Jy ! Component: 3100 - total flux cleaned = -0.000559286 Jy ! Component: 3150 - total flux cleaned = -0.00054665 Jy ! Component: 3200 - total flux cleaned = -0.000527907 Jy ! Component: 3250 - total flux cleaned = -0.000503064 Jy ! Component: 3300 - total flux cleaned = -0.000503038 Jy ! Component: 3350 - total flux cleaned = -0.000484623 Jy ! Component: 3400 - total flux cleaned = -0.000472442 Jy ! Component: 3450 - total flux cleaned = -0.000460304 Jy ! Component: 3500 - total flux cleaned = -0.000436213 Jy ! Component: 3550 - total flux cleaned = -0.000400324 Jy ! Component: 3600 - total flux cleaned = -0.000376599 Jy ! Component: 3650 - total flux cleaned = -0.000364825 Jy ! Component: 3700 - total flux cleaned = -0.000358911 Jy ! Component: 3750 - total flux cleaned = -0.000353023 Jy ! Component: 3800 - total flux cleaned = -0.000323934 Jy ! Component: 3850 - total flux cleaned = -0.0003181 Jy ! Component: 3900 - total flux cleaned = -0.000312351 Jy ! Component: 3950 - total flux cleaned = -0.000295157 Jy ! Component: 4000 - total flux cleaned = -0.000306559 Jy ! Component: 4050 - total flux cleaned = -0.000300862 Jy ! Total flux subtracted in 4096 components = -0.00028395 Jy ! Clean residual min=-0.000352 max=0.000317 Jy/beam ! Clean residual mean=0.000002 rms=0.000105 Jy/beam ! Combined flux in latest and established models = 0.0450824 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 314 components and 0.0450824 Jy ![Exited script file: muppet] wmap "J1834+2051_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.585 x 10.24 at -29.34 degrees (North through East) ! Clean map min=-0.00085242 max=0.045245 Jy/beam ! Writing clean map to FITS file: J1834+2051_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0452448 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000104172 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.690722 0.690722 1.38144 2.76289 5.52578 11.0516 22.1031 44.2062 88.4125 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.585 x 10.24 at -29.34 degrees (North through East) ! Clean map min=-0.00085242 max=0.045245 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1834+2051_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:05:01 2019