! Started logfile: J1832-1035_S_2017_09_26_pus_uvs.log on Sat May 11 13:04:49 2019 obs J1832-1035_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1832-1035_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.562925 visibilities/baseline/integration-bin. ! Found source: J1832-1035 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 23832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1832-1035_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 685 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 744 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 732 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2056 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003331Jy sigma=0.007658 ! Fit after self-cal, rms=0.953619Jy sigma=0.007281 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=18.9 mas, bpa=-18.63 degrees ! Estimated noise=1467.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401471 Jy ! Component: 100 - total flux cleaned = 0.049093 Jy ! Total flux subtracted in 100 components = 0.049093 Jy ! Clean residual min=-0.005140 max=0.006473 Jy/beam ! Clean residual mean=-0.000010 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.049093 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.049093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085348Jy sigma=0.000616 ! Fit after self-cal, rms=0.083721Jy sigma=0.000603 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=21.22 mas, bpa=-17.53 degrees ! Estimated noise=698.588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336247 Jy ! Component: 100 - total flux cleaned = 0.00510046 Jy ! Component: 150 - total flux cleaned = 0.00625703 Jy ! Component: 200 - total flux cleaned = 0.00693205 Jy ! Total flux subtracted in 200 components = 0.00693205 Jy ! Clean residual min=-0.003964 max=0.002510 Jy/beam ! Clean residual mean=-0.000006 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.0560251 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 39 components and 0.0560251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083544Jy sigma=0.000602 ! Fit after self-cal, rms=0.083471Jy sigma=0.000602 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.05 KP 1.01 ! LA 0.92 MK 0.95 NL 0.98 OV 1.09 ! PT 1.09 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.04 KP 0.98 ! LA 0.91 MK 1.00 NL 1.08 OV 1.12 ! PT 1.08 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00 KP 0.95 ! LA 0.87 MK 1.02 NL 1.04 OV 1.11 ! PT 1.08 ! ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.79 KP 1.00* ! LA 1.00* MK 0.97 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.083471Jy sigma=0.000602 ! Fit after self-cal, rms=0.082943Jy sigma=0.000599 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=21.39 mas, bpa=-17.51 degrees ! Estimated noise=712.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000957397 Jy ! Component: 100 - total flux cleaned = 0.00111237 Jy ! Component: 150 - total flux cleaned = 0.00122134 Jy ! Component: 200 - total flux cleaned = 0.00131969 Jy ! Total flux subtracted in 200 components = 0.00131969 Jy ! Clean residual min=-0.002667 max=0.002156 Jy/beam ! Clean residual mean=0.000001 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.0573448 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 60 components and 0.0573448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082925Jy sigma=0.000599 ! Fit after self-cal, rms=0.082867Jy sigma=0.000598 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082867Jy sigma=0.000598 ! Fit after self-cal, rms=0.081660Jy sigma=0.000597 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=21.31 mas, bpa=-17.7 degrees ! Estimated noise=711.381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257665 Jy ! Component: 100 - total flux cleaned = 0.000450154 Jy ! Component: 150 - total flux cleaned = 0.000542725 Jy ! Component: 200 - total flux cleaned = 0.000610289 Jy ! Total flux subtracted in 200 components = 0.000610289 Jy ! Clean residual min=-0.002261 max=0.002243 Jy/beam ! Clean residual mean=0.000002 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0579551 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.057955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081653Jy sigma=0.000597 ! Fit after self-cal, rms=0.081604Jy sigma=0.000597 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018527 Jy ! Component: 100 - total flux cleaned = 0.000309812 Jy ! Component: 150 - total flux cleaned = 0.000373837 Jy ! Component: 200 - total flux cleaned = 0.000433482 Jy ! Total flux subtracted in 200 components = 0.000433482 Jy ! Clean residual min=-0.002347 max=0.002166 Jy/beam ! Clean residual mean=0.000001 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0583885 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.0583885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081597Jy sigma=0.000597 ! Fit after self-cal, rms=0.081596Jy sigma=0.000597 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081596Jy sigma=0.000597 ! Fit after self-cal, rms=0.081556Jy sigma=0.000596 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.653 mas, bmaj=21.24 mas, bpa=-17.81 degrees ! Estimated noise=710.185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127223 Jy ! Component: 100 - total flux cleaned = 0.000248633 Jy ! Component: 150 - total flux cleaned = 0.000336503 Jy ! Component: 200 - total flux cleaned = 0.000412388 Jy ! Total flux subtracted in 200 components = 0.000412388 Jy ! Clean residual min=-0.002273 max=0.002215 Jy/beam ! Clean residual mean=0.000002 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0588009 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.0588009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081550Jy sigma=0.000596 ! Fit after self-cal, rms=0.081571Jy sigma=0.000596 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.33266e-05 Jy ! Component: 100 - total flux cleaned = 9.33059e-05 Jy ! Component: 150 - total flux cleaned = 0.000133826 Jy ! Component: 200 - total flux cleaned = 0.000170945 Jy ! Total flux subtracted in 200 components = 0.000170945 Jy ! Clean residual min=-0.002299 max=0.002099 Jy/beam ! Clean residual mean=0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0589719 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 95 components and 0.0589719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081567Jy sigma=0.000596 ! Fit after self-cal, rms=0.081569Jy sigma=0.000596 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081569Jy sigma=0.000596 ! Fit after self-cal, rms=0.081571Jy sigma=0.000596 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.554 mas, bmaj=25.64 mas, bpa=-12.52 degrees ! Estimated noise=824.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316005 Jy ! Component: 100 - total flux cleaned = 0.000376987 Jy ! Component: 150 - total flux cleaned = 0.000462637 Jy ! Component: 200 - total flux cleaned = 0.000516901 Jy ! Total flux subtracted in 200 components = 0.000516901 Jy ! Clean residual min=-0.002861 max=0.002746 Jy/beam ! Clean residual mean=0.000004 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.0594888 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 0.0594888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081569Jy sigma=0.000596 ! Fit after self-cal, rms=0.081565Jy sigma=0.000596 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.09347e-05 Jy ! Component: 100 - total flux cleaned = 0.000149015 Jy ! Component: 150 - total flux cleaned = 0.000215845 Jy ! Component: 200 - total flux cleaned = 0.000265988 Jy ! Total flux subtracted in 200 components = 0.000265988 Jy ! Clean residual min=-0.002847 max=0.002741 Jy/beam ! Clean residual mean=0.000004 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0597547 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 112 components and 0.0597547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081564Jy sigma=0.000596 ! Fit after self-cal, rms=0.081564Jy sigma=0.000596 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=21.18 mas, bpa=-17.87 degrees ! Estimated noise=709.433 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.646 x 21.18 at -17.87 degrees (North through East) ! Clean map min=-0.0025311 max=0.05068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=18.79 mas, bpa=-18.73 degrees ! Estimated noise=1165.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398446 Jy ! Component: 100 - total flux cleaned = 0.048771 Jy ! Component: 150 - total flux cleaned = 0.0517471 Jy ! Component: 200 - total flux cleaned = 0.053508 Jy ! Total flux subtracted in 200 components = 0.053508 Jy ! Clean residual min=-0.002925 max=0.003491 Jy/beam ! Clean residual mean=0.000005 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.053508 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.053508 Jy ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=21.18 mas, bpa=-17.87 degrees ! Estimated noise=709.433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250357 Jy ! Component: 100 - total flux cleaned = 0.0037669 Jy ! Component: 150 - total flux cleaned = 0.00422454 Jy ! Component: 200 - total flux cleaned = 0.00455573 Jy ! Total flux subtracted in 200 components = 0.00455573 Jy ! Clean residual min=-0.002360 max=0.002267 Jy/beam ! Clean residual mean=0.000001 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0580637 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.0580637 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.554 mas, bmaj=25.64 mas, bpa=-12.52 degrees ! Estimated noise=824.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504992 Jy ! Component: 100 - total flux cleaned = 0.000740258 Jy ! Component: 150 - total flux cleaned = 0.000940014 Jy ! Component: 200 - total flux cleaned = 0.00109403 Jy ! Total flux subtracted in 200 components = 0.00109403 Jy ! Clean residual min=-0.002840 max=0.002768 Jy/beam ! Clean residual mean=0.000003 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.0591577 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150411 Jy ! Component: 100 - total flux cleaned = 0.00025759 Jy ! Component: 150 - total flux cleaned = 0.000343959 Jy ! Component: 200 - total flux cleaned = 0.000423056 Jy ! Total flux subtracted in 200 components = 0.000423056 Jy ! Clean residual min=-0.002820 max=0.002751 Jy/beam ! Clean residual mean=0.000003 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0595808 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.0595808 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=21.18 mas, bpa=-17.87 degrees ! Estimated noise=709.433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.01112e-05 Jy ! Component: 100 - total flux cleaned = -1.05779e-05 Jy ! Component: 150 - total flux cleaned = 2.44439e-05 Jy ! Component: 200 - total flux cleaned = 5.67775e-05 Jy ! Total flux subtracted in 200 components = 5.67775e-05 Jy ! Clean residual min=-0.002243 max=0.002171 Jy/beam ! Clean residual mean=0.000002 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0596376 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.0596376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081570Jy sigma=0.000596 ! Fit after self-cal, rms=0.081562Jy sigma=0.000596 wmodel J1832-1035_S_2017_09_26_pus_map.mod ! Writing 71 model components to file: J1832-1035_S_2017_09_26_pus_map.mod wobs J1832-1035_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1832-1035_S_2017_09_26_pus_uvs.fits wwins J1832-1035_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1832-1035_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.15756e-05 Jy ! Component: 100 - total flux cleaned = -0.000261005 Jy ! Component: 150 - total flux cleaned = -0.000321474 Jy ! Component: 200 - total flux cleaned = -0.000404252 Jy ! Component: 250 - total flux cleaned = -0.000405129 Jy ! Component: 300 - total flux cleaned = -0.000428557 Jy ! Component: 350 - total flux cleaned = -0.000380255 Jy ! Component: 400 - total flux cleaned = -0.000357948 Jy ! Component: 450 - total flux cleaned = -0.000337373 Jy ! Component: 500 - total flux cleaned = -0.000317162 Jy ! Component: 550 - total flux cleaned = -0.00023816 Jy ! Component: 600 - total flux cleaned = -0.000238585 Jy ! Component: 650 - total flux cleaned = -0.000219733 Jy ! Component: 700 - total flux cleaned = -0.000237528 Jy ! Component: 750 - total flux cleaned = -0.000219478 Jy ! Component: 800 - total flux cleaned = -0.000168003 Jy ! Component: 850 - total flux cleaned = -0.00013478 Jy ! Component: 900 - total flux cleaned = -0.000102896 Jy ! Component: 950 - total flux cleaned = -5.58707e-05 Jy ! Component: 1000 - total flux cleaned = -9.55778e-06 Jy ! Component: 1050 - total flux cleaned = 5.03882e-05 Jy ! Component: 1100 - total flux cleaned = 7.98477e-05 Jy ! Component: 1150 - total flux cleaned = 0.000137136 Jy ! Component: 1200 - total flux cleaned = 0.000164838 Jy ! Component: 1250 - total flux cleaned = 0.00019213 Jy ! Component: 1300 - total flux cleaned = 0.000218975 Jy ! Component: 1350 - total flux cleaned = 0.000258016 Jy ! Component: 1400 - total flux cleaned = 0.00028378 Jy ! Component: 1450 - total flux cleaned = 0.000347 Jy ! Component: 1500 - total flux cleaned = 0.000359509 Jy ! Component: 1550 - total flux cleaned = 0.000420509 Jy ! Component: 1600 - total flux cleaned = 0.000420766 Jy ! Component: 1650 - total flux cleaned = 0.000456378 Jy ! Component: 1700 - total flux cleaned = 0.0004911 Jy ! Component: 1750 - total flux cleaned = 0.000514082 Jy ! Component: 1800 - total flux cleaned = 0.000514163 Jy ! Component: 1850 - total flux cleaned = 0.000536425 Jy ! Component: 1900 - total flux cleaned = 0.000525233 Jy ! Component: 1950 - total flux cleaned = 0.000514127 Jy ! Component: 2000 - total flux cleaned = 0.000482274 Jy ! Component: 2050 - total flux cleaned = 0.000492663 Jy ! Component: 2100 - total flux cleaned = 0.000420113 Jy ! Component: 2150 - total flux cleaned = 0.000450712 Jy ! Component: 2200 - total flux cleaned = 0.000420376 Jy ! Component: 2250 - total flux cleaned = 0.000410456 Jy ! Component: 2300 - total flux cleaned = 0.000371073 Jy ! Component: 2350 - total flux cleaned = 0.00034186 Jy ! Component: 2400 - total flux cleaned = 0.000332251 Jy ! Component: 2450 - total flux cleaned = 0.000284602 Jy ! Component: 2500 - total flux cleaned = 0.000265771 Jy ! Component: 2550 - total flux cleaned = 0.000237774 Jy ! Component: 2600 - total flux cleaned = 0.000219274 Jy ! Component: 2650 - total flux cleaned = 0.000191841 Jy ! Component: 2700 - total flux cleaned = 0.000173693 Jy ! Component: 2750 - total flux cleaned = 0.000155626 Jy ! Component: 2800 - total flux cleaned = 0.000137731 Jy ! Component: 2850 - total flux cleaned = 9.35032e-05 Jy ! Component: 2900 - total flux cleaned = 5.85477e-05 Jy ! Component: 2950 - total flux cleaned = 4.12626e-05 Jy ! Component: 3000 - total flux cleaned = 1.53053e-05 Jy ! Component: 3050 - total flux cleaned = -1.88536e-05 Jy ! Component: 3100 - total flux cleaned = -6.12712e-05 Jy ! Component: 3150 - total flux cleaned = -0.000111806 Jy ! Component: 3200 - total flux cleaned = -0.000145169 Jy ! Component: 3250 - total flux cleaned = -0.000145161 Jy ! Component: 3300 - total flux cleaned = -0.000194542 Jy ! Component: 3350 - total flux cleaned = -0.000219079 Jy ! Component: 3400 - total flux cleaned = -0.000259682 Jy ! Component: 3450 - total flux cleaned = -0.000267737 Jy ! Component: 3500 - total flux cleaned = -0.000267828 Jy ! Component: 3550 - total flux cleaned = -0.000299666 Jy ! Component: 3600 - total flux cleaned = -0.0003154 Jy ! Component: 3650 - total flux cleaned = -0.0003389 Jy ! Component: 3700 - total flux cleaned = -0.000346653 Jy ! Component: 3750 - total flux cleaned = -0.000338839 Jy ! Component: 3800 - total flux cleaned = -0.000362052 Jy ! Component: 3850 - total flux cleaned = -0.000362047 Jy ! Component: 3900 - total flux cleaned = -0.000392622 Jy ! Component: 3950 - total flux cleaned = -0.000407819 Jy ! Component: 4000 - total flux cleaned = -0.000407815 Jy ! Component: 4050 - total flux cleaned = -0.000437941 Jy ! Total flux subtracted in 4096 components = -0.000430472 Jy ! Clean residual min=-0.000427 max=0.000445 Jy/beam ! Clean residual mean=-0.000005 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.0592071 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 383 components and 0.0592071 Jy ![Exited script file: muppet] wmap "J1832-1035_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.646 x 21.18 at -17.87 degrees (North through East) ! Clean map min=-0.0019955 max=0.050522 Jy/beam ! Writing clean map to FITS file: J1832-1035_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0505218 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000143417 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.851616 0.851616 1.70323 3.40646 6.81292 13.6258 27.2517 54.5034 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.646 x 21.18 at -17.87 degrees (North through East) ! Clean map min=-0.0019955 max=0.050522 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1832-1035_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:04:55 2019