! Started logfile: J1832+1357_S_2017_05_27_pus_uvs.log on Fri May 3 11:13:04 2019 obs J1832+1357_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1832+1357_S_2017_05_27_pus_uva.fits ! AN table 1: 172 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.856848 visibilities/baseline/integration-bin. ! Found source: J1832+1357 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 26528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1832+1357_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1000 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.686622Jy sigma=0.043204 ! Fit after self-cal, rms=0.663141Jy sigma=0.043154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=6.216 mas, bpa=-2.558 degrees ! Estimated noise=613.281 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.191305 Jy ! Component: 100 - total flux cleaned = 0.256272 Jy ! Total flux subtracted in 100 components = 0.256272 Jy ! Clean residual min=-0.043325 max=0.062349 Jy/beam ! Clean residual mean=0.000012 rms=0.013624 Jy/beam ! Combined flux in latest and established models = 0.256272 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.256272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172701Jy sigma=0.008365 ! Fit after self-cal, rms=0.172432Jy sigma=0.008364 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=6.695 mas, bpa=1.935 degrees ! Estimated noise=338.496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473862 Jy ! Component: 100 - total flux cleaned = 0.0760849 Jy ! Component: 150 - total flux cleaned = 0.0952207 Jy ! Component: 200 - total flux cleaned = 0.100473 Jy ! Total flux subtracted in 200 components = 0.100473 Jy ! Clean residual min=-0.053843 max=0.062988 Jy/beam ! Clean residual mean=-0.000015 rms=0.015983 Jy/beam ! Combined flux in latest and established models = 0.356745 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.356745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162101Jy sigma=0.007691 ! Fit after self-cal, rms=0.161631Jy sigma=0.007690 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 7.84 FD 0.79 HN 0.89 KP 0.92 ! LA 0.91 MK 1.03 NL 0.81 OV 0.91 ! PT 0.97 SC 0.53 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 41.59 FD 0.81 HN 0.95 KP 0.90 ! LA 0.89 MK 1.01 NL 0.96 OV 0.93 ! PT 0.95 SC 0.57 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.62 FD 0.83 HN 0.95 KP 0.90 ! LA 0.92 MK 1.01 NL 0.93 OV 0.86 ! PT 0.93 SC 0.65 ! ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 0.90 KP 1.00* ! LA 0.92 MK 1.24 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.161631Jy sigma=0.007690 ! Fit after self-cal, rms=2.939906Jy sigma=0.001298 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=7.163 mas, bpa=0.06932 degrees ! Estimated noise=444.291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844496 Jy ! Component: 100 - total flux cleaned = 0.00607306 Jy ! Component: 150 - total flux cleaned = 0.00516986 Jy ! Component: 200 - total flux cleaned = 0.00439565 Jy ! Total flux subtracted in 200 components = 0.00439565 Jy ! Clean residual min=-0.023436 max=0.015119 Jy/beam ! Clean residual mean=-0.000002 rms=0.004059 Jy/beam ! Combined flux in latest and established models = 0.361141 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.361141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.923138Jy sigma=0.001241 ! Fit after self-cal, rms=2.923182Jy sigma=0.001221 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.923182Jy sigma=0.001221 ! Fit after self-cal, rms=3.779715Jy sigma=0.001163 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=7.243 mas, bpa=-3.172 degrees ! Estimated noise=483.774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124991 Jy ! Component: 100 - total flux cleaned = 0.0115789 Jy ! Component: 150 - total flux cleaned = 0.0101662 Jy ! Component: 200 - total flux cleaned = 0.00903932 Jy ! Total flux subtracted in 200 components = 0.00903932 Jy ! Clean residual min=-0.023164 max=0.014201 Jy/beam ! Clean residual mean=0.000018 rms=0.004253 Jy/beam ! Combined flux in latest and established models = 0.37018 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.37018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.766967Jy sigma=0.001179 ! Fit after self-cal, rms=3.766953Jy sigma=0.001178 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113551 Jy ! Component: 100 - total flux cleaned = -0.00206435 Jy ! Component: 150 - total flux cleaned = -0.00330891 Jy ! Component: 200 - total flux cleaned = -0.00441899 Jy ! Total flux subtracted in 200 components = -0.00441899 Jy ! Clean residual min=-0.021897 max=0.013622 Jy/beam ! Clean residual mean=0.000016 rms=0.004190 Jy/beam ! Combined flux in latest and established models = 0.365761 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.365761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.762869Jy sigma=0.001192 ! Fit after self-cal, rms=3.762859Jy sigma=0.001192 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.762859Jy sigma=0.001192 ! Fit after self-cal, rms=0.983826Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=7.184 mas, bpa=-4.682 degrees ! Estimated noise=488.797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250734 Jy ! Component: 100 - total flux cleaned = 0.00232075 Jy ! Component: 150 - total flux cleaned = 0.00246433 Jy ! Component: 200 - total flux cleaned = 0.00270364 Jy ! Total flux subtracted in 200 components = 0.00270364 Jy ! Clean residual min=-0.006087 max=0.005387 Jy/beam ! Clean residual mean=0.000001 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.368465 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.368465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.982697Jy sigma=0.000783 ! Fit after self-cal, rms=0.982688Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372195 Jy ! Component: 100 - total flux cleaned = 0.000455351 Jy ! Component: 150 - total flux cleaned = 0.000528999 Jy ! Component: 200 - total flux cleaned = 0.000463931 Jy ! Total flux subtracted in 200 components = 0.000463931 Jy ! Clean residual min=-0.006425 max=0.005541 Jy/beam ! Clean residual mean=0.000002 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.368929 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.368929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.982349Jy sigma=0.000783 ! Fit after self-cal, rms=0.982350Jy sigma=0.000782 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.982350Jy sigma=0.000782 ! Fit after self-cal, rms=1.020553Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=10.82 mas, bpa=-4.584 degrees ! Estimated noise=616.995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211647 Jy ! Component: 100 - total flux cleaned = 0.00142955 Jy ! Component: 150 - total flux cleaned = 0.00085937 Jy ! Component: 200 - total flux cleaned = 0.000499584 Jy ! Total flux subtracted in 200 components = 0.000499584 Jy ! Clean residual min=-0.006197 max=0.005331 Jy/beam ! Clean residual mean=-0.000004 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.369429 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.369429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.019402Jy sigma=0.000783 ! Fit after self-cal, rms=1.019400Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.85011e-05 Jy ! Component: 100 - total flux cleaned = -0.000327215 Jy ! Component: 150 - total flux cleaned = -0.000635727 Jy ! Component: 200 - total flux cleaned = -0.000893178 Jy ! Total flux subtracted in 200 components = -0.000893178 Jy ! Clean residual min=-0.006289 max=0.005651 Jy/beam ! Clean residual mean=-0.000005 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.368535 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.368535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.019012Jy sigma=0.000787 ! Fit after self-cal, rms=1.019011Jy sigma=0.000787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=7.267 mas, bpa=-5.207 degrees ! Estimated noise=499.388 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 7.267 at -5.207 degrees (North through East) ! Clean map min=-0.0060886 max=0.31848 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=6.494 mas, bpa=-6.617 degrees ! Estimated noise=753.917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238012 Jy ! Component: 100 - total flux cleaned = 0.304677 Jy ! Component: 150 - total flux cleaned = 0.335759 Jy ! Component: 200 - total flux cleaned = 0.351436 Jy ! Total flux subtracted in 200 components = 0.351436 Jy ! Clean residual min=-0.004873 max=0.007966 Jy/beam ! Clean residual mean=-0.000000 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.351436 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.351436 Jy ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=7.267 mas, bpa=-5.207 degrees ! Estimated noise=499.388 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120689 Jy ! Component: 100 - total flux cleaned = 0.0177354 Jy ! Component: 150 - total flux cleaned = 0.0188089 Jy ! Component: 200 - total flux cleaned = 0.0189334 Jy ! Total flux subtracted in 200 components = 0.0189334 Jy ! Clean residual min=-0.006725 max=0.005417 Jy/beam ! Clean residual mean=-0.000002 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 0.370369 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 52 components and 0.370369 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=10.82 mas, bpa=-4.584 degrees ! Estimated noise=616.995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.80758e-05 Jy ! Component: 100 - total flux cleaned = -0.00063028 Jy ! Component: 150 - total flux cleaned = -0.000958492 Jy ! Component: 200 - total flux cleaned = -0.0012371 Jy ! Total flux subtracted in 200 components = -0.0012371 Jy ! Clean residual min=-0.006425 max=0.005740 Jy/beam ! Clean residual mean=-0.000004 rms=0.001892 Jy/beam ! Combined flux in latest and established models = 0.369132 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239028 Jy ! Component: 100 - total flux cleaned = -0.000374835 Jy ! Component: 150 - total flux cleaned = -0.000557012 Jy ! Component: 200 - total flux cleaned = -0.000665646 Jy ! Total flux subtracted in 200 components = -0.000665646 Jy ! Clean residual min=-0.006483 max=0.005939 Jy/beam ! Clean residual mean=-0.000004 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.368466 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.368466 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=7.267 mas, bpa=-5.207 degrees ! Estimated noise=499.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182137 Jy ! Component: 100 - total flux cleaned = 0.00214816 Jy ! Component: 150 - total flux cleaned = 0.00223192 Jy ! Component: 200 - total flux cleaned = 0.00235568 Jy ! Total flux subtracted in 200 components = 0.00235568 Jy ! Clean residual min=-0.006668 max=0.006041 Jy/beam ! Clean residual mean=-0.000001 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.370822 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.370822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.018778Jy sigma=0.000783 ! Fit after self-cal, rms=1.018777Jy sigma=0.000783 wmodel J1832+1357_S_2017_05_27_pus_map.mod ! Writing 72 model components to file: J1832+1357_S_2017_05_27_pus_map.mod wobs J1832+1357_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1832+1357_S_2017_05_27_pus_uvs.fits wwins J1832+1357_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1832+1357_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016459 Jy ! Component: 100 - total flux cleaned = -0.00272458 Jy ! Component: 150 - total flux cleaned = -0.00365201 Jy ! Component: 200 - total flux cleaned = -0.0045444 Jy ! Component: 250 - total flux cleaned = -0.00492696 Jy ! Component: 300 - total flux cleaned = -0.00520652 Jy ! Component: 350 - total flux cleaned = -0.00511456 Jy ! Component: 400 - total flux cleaned = -0.00511443 Jy ! Component: 450 - total flux cleaned = -0.00511443 Jy ! Component: 500 - total flux cleaned = -0.00511467 Jy ! Component: 550 - total flux cleaned = -0.00520059 Jy ! Component: 600 - total flux cleaned = -0.00503243 Jy ! Component: 650 - total flux cleaned = -0.00511626 Jy ! Component: 700 - total flux cleaned = -0.0049517 Jy ! Component: 750 - total flux cleaned = -0.00503309 Jy ! Component: 800 - total flux cleaned = -0.00495202 Jy ! Component: 850 - total flux cleaned = -0.00487298 Jy ! Component: 900 - total flux cleaned = -0.00479439 Jy ! Component: 950 - total flux cleaned = -0.00479443 Jy ! Component: 1000 - total flux cleaned = -0.00479389 Jy ! Component: 1050 - total flux cleaned = -0.00471699 Jy ! Component: 1100 - total flux cleaned = -0.0045646 Jy ! Component: 1150 - total flux cleaned = -0.00441372 Jy ! Component: 1200 - total flux cleaned = -0.0042642 Jy ! Component: 1250 - total flux cleaned = -0.00411593 Jy ! Component: 1300 - total flux cleaned = -0.00411585 Jy ! Component: 1350 - total flux cleaned = -0.00404267 Jy ! Component: 1400 - total flux cleaned = -0.0038976 Jy ! Component: 1450 - total flux cleaned = -0.00368164 Jy ! Component: 1500 - total flux cleaned = -0.00361075 Jy ! Component: 1550 - total flux cleaned = -0.00361119 Jy ! Component: 1600 - total flux cleaned = -0.00354039 Jy ! Component: 1650 - total flux cleaned = -0.00340026 Jy ! Component: 1700 - total flux cleaned = -0.00333083 Jy ! Component: 1750 - total flux cleaned = -0.00326174 Jy ! Component: 1800 - total flux cleaned = -0.00312433 Jy ! Component: 1850 - total flux cleaned = -0.00298777 Jy ! Component: 1900 - total flux cleaned = -0.00292 Jy ! Component: 1950 - total flux cleaned = -0.00271787 Jy ! Component: 2000 - total flux cleaned = -0.00258443 Jy ! Component: 2050 - total flux cleaned = -0.00245227 Jy ! Component: 2100 - total flux cleaned = -0.00238621 Jy ! Component: 2150 - total flux cleaned = -0.0022547 Jy ! Component: 2200 - total flux cleaned = -0.0021891 Jy ! Component: 2250 - total flux cleaned = -0.00199446 Jy ! Component: 2300 - total flux cleaned = -0.00199467 Jy ! Component: 2350 - total flux cleaned = -0.0018661 Jy ! Component: 2400 - total flux cleaned = -0.00173828 Jy ! Component: 2450 - total flux cleaned = -0.00154774 Jy ! Component: 2500 - total flux cleaned = -0.00148453 Jy ! Component: 2550 - total flux cleaned = -0.00129608 Jy ! Component: 2600 - total flux cleaned = -0.00123351 Jy ! Component: 2650 - total flux cleaned = -0.00104684 Jy ! Component: 2700 - total flux cleaned = -0.000985009 Jy ! Component: 2750 - total flux cleaned = -0.000923261 Jy ! Component: 2800 - total flux cleaned = -0.000923167 Jy ! Component: 2850 - total flux cleaned = -0.000617388 Jy ! Component: 2900 - total flux cleaned = -0.000556554 Jy ! Component: 2950 - total flux cleaned = -0.000314202 Jy ! Component: 3000 - total flux cleaned = -0.000254008 Jy ! Component: 3050 - total flux cleaned = -0.000193604 Jy ! Component: 3100 - total flux cleaned = -7.38638e-05 Jy ! Component: 3150 - total flux cleaned = -1.39596e-05 Jy ! Component: 3200 - total flux cleaned = 0.000282571 Jy ! Component: 3250 - total flux cleaned = 0.00028262 Jy ! Component: 3300 - total flux cleaned = 0.000517698 Jy ! Component: 3350 - total flux cleaned = 0.000576223 Jy ! Component: 3400 - total flux cleaned = 0.000692717 Jy ! Component: 3450 - total flux cleaned = 0.000924857 Jy ! Component: 3500 - total flux cleaned = 0.000924825 Jy ! Component: 3550 - total flux cleaned = 0.000924989 Jy ! Component: 3600 - total flux cleaned = 0.000982066 Jy ! Component: 3650 - total flux cleaned = 0.00126784 Jy ! Component: 3700 - total flux cleaned = 0.00126764 Jy ! Component: 3750 - total flux cleaned = 0.00126755 Jy ! Component: 3800 - total flux cleaned = 0.00132408 Jy ! Component: 3850 - total flux cleaned = 0.00132424 Jy ! Component: 3900 - total flux cleaned = 0.00149241 Jy ! Component: 3950 - total flux cleaned = 0.00149239 Jy ! Component: 4000 - total flux cleaned = 0.00149236 Jy ! Component: 4050 - total flux cleaned = 0.00143694 Jy ! Total flux subtracted in 4096 components = 0.0016029 Jy ! Clean residual min=-0.002763 max=0.003426 Jy/beam ! Clean residual mean=-0.000008 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.372425 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 383 components and 0.372425 Jy ![Exited script file: muppet] wmap "J1832+1357_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 7.267 at -5.207 degrees (North through East) ! Clean map min=-0.0070762 max=0.3202 Jy/beam ! Writing clean map to FITS file: J1832+1357_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.320201 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00106475 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.997577 0.997577 1.99515 3.99031 7.98061 15.9612 31.9224 63.8449 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.32 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 7.267 at -5.207 degrees (North through East) ! Clean map min=-0.0070762 max=0.3202 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1832+1357_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:13:09 2019