! Started logfile: J1830-4441_S_2017_10_09_pus_uvs.log on Sun May 12 13:17:30 2019 obs J1830-4441_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1830-4441_S_2017_10_09_pus_uva.fits ! AN table 1: 159 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.265723 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1830-4441 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 6084 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1830-4441_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 720 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 673 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 958 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1275 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.731006Jy sigma=0.004192 ! Fit after self-cal, rms=0.692222Jy sigma=0.003958 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=79.05 mas, bpa=-17.61 degrees ! Estimated noise=2878.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.243617 Jy ! Component: 100 - total flux cleaned = 0.319785 Jy ! Total flux subtracted in 100 components = 0.319785 Jy ! Clean residual min=-0.027333 max=0.035822 Jy/beam ! Clean residual mean=-0.001065 rms=0.011053 Jy/beam ! Combined flux in latest and established models = 0.319785 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.319785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155353Jy sigma=0.000818 ! Fit after self-cal, rms=0.154797Jy sigma=0.000815 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=78.94 mas, bpa=-17.79 degrees ! Estimated noise=2095.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516103 Jy ! Component: 100 - total flux cleaned = 0.076741 Jy ! Component: 150 - total flux cleaned = 0.0828326 Jy ! Component: 200 - total flux cleaned = 0.0847343 Jy ! Total flux subtracted in 200 components = 0.0847343 Jy ! Clean residual min=-0.013938 max=0.012567 Jy/beam ! Clean residual mean=-0.000496 rms=0.004115 Jy/beam ! Combined flux in latest and established models = 0.40452 Jy ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 108 components and 0.40452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136276Jy sigma=0.000722 ! Fit after self-cal, rms=0.136098Jy sigma=0.000722 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.01 ! LA 0.98 MK 1.19 NL 0.84 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.97 ! LA 1.00 MK 0.96 NL 1.53 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.86 ! LA 0.76 MK 1.00 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.136098Jy sigma=0.000722 ! Fit after self-cal, rms=0.130284Jy sigma=0.000699 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.953 mas, bmaj=80.3 mas, bpa=-17.93 degrees ! Estimated noise=2211.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220603 Jy ! Component: 100 - total flux cleaned = 0.00221681 Jy ! Component: 150 - total flux cleaned = 0.00183466 Jy ! Component: 200 - total flux cleaned = 0.00184239 Jy ! Total flux subtracted in 200 components = 0.00184239 Jy ! Clean residual min=-0.007685 max=0.006659 Jy/beam ! Clean residual mean=-0.000148 rms=0.002363 Jy/beam ! Combined flux in latest and established models = 0.406362 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 155 components and 0.406362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129509Jy sigma=0.000695 ! Fit after self-cal, rms=0.129439Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129439Jy sigma=0.000695 ! Fit after self-cal, rms=0.128459Jy sigma=0.000692 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=80.54 mas, bpa=-17.93 degrees ! Estimated noise=2201.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000993179 Jy ! Component: 100 - total flux cleaned = 0.00113399 Jy ! Component: 150 - total flux cleaned = 0.00112581 Jy ! Component: 200 - total flux cleaned = 0.00144941 Jy ! Total flux subtracted in 200 components = 0.00144941 Jy ! Clean residual min=-0.006083 max=0.005403 Jy/beam ! Clean residual mean=0.000046 rms=0.001924 Jy/beam ! Combined flux in latest and established models = 0.407811 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 193 components and 0.407811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128157Jy sigma=0.000691 ! Fit after self-cal, rms=0.128138Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204275 Jy ! Component: 100 - total flux cleaned = 0.000400264 Jy ! Component: 150 - total flux cleaned = 0.000671934 Jy ! Component: 200 - total flux cleaned = 0.000842157 Jy ! Total flux subtracted in 200 components = 0.000842157 Jy ! Clean residual min=-0.005343 max=0.005015 Jy/beam ! Clean residual mean=0.000045 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.408653 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 225 components and 0.408653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128001Jy sigma=0.000690 ! Fit after self-cal, rms=0.127995Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127995Jy sigma=0.000690 ! Fit after self-cal, rms=0.127511Jy sigma=0.000690 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.96 mas, bmaj=80.73 mas, bpa=-17.93 degrees ! Estimated noise=2193.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000651398 Jy ! Component: 100 - total flux cleaned = -0.000285215 Jy ! Component: 150 - total flux cleaned = -3.76513e-05 Jy ! Component: 200 - total flux cleaned = 0.000190308 Jy ! Total flux subtracted in 200 components = 0.000190308 Jy ! Clean residual min=-0.004505 max=0.004506 Jy/beam ! Clean residual mean=0.000078 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.408844 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 239 components and 0.408844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127387Jy sigma=0.000689 ! Fit after self-cal, rms=0.127387Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.58136e-05 Jy ! Component: 100 - total flux cleaned = 0.000136916 Jy ! Component: 150 - total flux cleaned = 0.000204013 Jy ! Component: 200 - total flux cleaned = 0.000265988 Jy ! Total flux subtracted in 200 components = 0.000265988 Jy ! Clean residual min=-0.004328 max=0.004237 Jy/beam ! Clean residual mean=0.000076 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.40911 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 250 components and 0.40911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127317Jy sigma=0.000689 ! Fit after self-cal, rms=0.127312Jy sigma=0.000689 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127312Jy sigma=0.000689 ! Fit after self-cal, rms=0.126963Jy sigma=0.000689 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.34 mas, bmaj=84.35 mas, bpa=-14.76 degrees ! Estimated noise=2523.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000577964 Jy ! Component: 100 - total flux cleaned = -0.000518102 Jy ! Component: 150 - total flux cleaned = -0.000393669 Jy ! Component: 200 - total flux cleaned = -0.000278447 Jy ! Total flux subtracted in 200 components = -0.000278447 Jy ! Clean residual min=-0.004896 max=0.005062 Jy/beam ! Clean residual mean=0.000108 rms=0.001752 Jy/beam ! Combined flux in latest and established models = 0.408831 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 295 components and 0.408831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126897Jy sigma=0.000688 ! Fit after self-cal, rms=0.126902Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.3529e-06 Jy ! Component: 100 - total flux cleaned = 6.24153e-05 Jy ! Component: 150 - total flux cleaned = 0.000162924 Jy ! Component: 200 - total flux cleaned = 0.000258014 Jy ! Total flux subtracted in 200 components = 0.000258014 Jy ! Clean residual min=-0.004626 max=0.004798 Jy/beam ! Clean residual mean=0.000106 rms=0.001662 Jy/beam ! Combined flux in latest and established models = 0.409089 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 324 components and 0.409089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126870Jy sigma=0.000688 ! Fit after self-cal, rms=0.126868Jy sigma=0.000688 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.962 mas, bmaj=80.88 mas, bpa=-17.92 degrees ! Estimated noise=2188.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.962 x 80.88 at -17.92 degrees (North through East) ! Clean map min=-0.015285 max=0.20953 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=80.48 mas, bpa=-17.81 degrees ! Estimated noise=2951.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242027 Jy ! Component: 100 - total flux cleaned = 0.314131 Jy ! Component: 150 - total flux cleaned = 0.351998 Jy ! Component: 200 - total flux cleaned = 0.374378 Jy ! Total flux subtracted in 200 components = 0.374378 Jy ! Clean residual min=-0.014249 max=0.012101 Jy/beam ! Clean residual mean=-0.000142 rms=0.004185 Jy/beam ! Combined flux in latest and established models = 0.374378 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 72 model components to the UV plane model. ! The established model now contains 72 components and 0.374378 Jy ! Inverting map and beam ! Estimated beam: bmin=3.962 mas, bmaj=80.88 mas, bpa=-17.92 degrees ! Estimated noise=2188.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011539 Jy ! Component: 100 - total flux cleaned = 0.0129778 Jy ! Component: 150 - total flux cleaned = 0.0152116 Jy ! Component: 200 - total flux cleaned = 0.0173687 Jy ! Total flux subtracted in 200 components = 0.0173687 Jy ! Clean residual min=-0.008703 max=0.006871 Jy/beam ! Clean residual mean=0.000045 rms=0.002761 Jy/beam ! Combined flux in latest and established models = 0.391747 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 162 components and 0.391747 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.34 mas, bmaj=84.35 mas, bpa=-14.76 degrees ! Estimated noise=2523.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361952 Jy ! Component: 100 - total flux cleaned = 0.00538203 Jy ! Component: 150 - total flux cleaned = 0.00703934 Jy ! Component: 200 - total flux cleaned = 0.00825327 Jy ! Total flux subtracted in 200 components = 0.00825327 Jy ! Clean residual min=-0.007103 max=0.006168 Jy/beam ! Clean residual mean=0.000077 rms=0.002396 Jy/beam ! Combined flux in latest and established models = 0.4 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012024 Jy ! Component: 100 - total flux cleaned = 0.00225122 Jy ! Component: 150 - total flux cleaned = 0.00317175 Jy ! Component: 200 - total flux cleaned = 0.00398665 Jy ! Total flux subtracted in 200 components = 0.00398665 Jy ! Clean residual min=-0.005516 max=0.005446 Jy/beam ! Clean residual mean=0.000094 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.403987 Jy ! Adding 142 model components to the UV plane model. ! The established model now contains 291 components and 0.403987 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.962 mas, bmaj=80.88 mas, bpa=-17.92 degrees ! Estimated noise=2188.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131454 Jy ! Component: 100 - total flux cleaned = 0.00223602 Jy ! Component: 150 - total flux cleaned = 0.00297796 Jy ! Component: 200 - total flux cleaned = 0.0033725 Jy ! Total flux subtracted in 200 components = 0.0033725 Jy ! Clean residual min=-0.004736 max=0.004197 Jy/beam ! Clean residual mean=0.000078 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.407359 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 323 components and 0.407359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126908Jy sigma=0.000689 ! Fit after self-cal, rms=0.126903Jy sigma=0.000688 wmodel J1830-4441_S_2017_10_09_pus_map.mod ! Writing 323 model components to file: J1830-4441_S_2017_10_09_pus_map.mod wobs J1830-4441_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1830-4441_S_2017_10_09_pus_uvs.fits wwins J1830-4441_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1830-4441_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.6911e-05 Jy ! Component: 100 - total flux cleaned = 1.47179e-05 Jy ! Component: 150 - total flux cleaned = -0.000101367 Jy ! Component: 200 - total flux cleaned = -0.000103996 Jy ! Component: 250 - total flux cleaned = 7.56881e-05 Jy ! Component: 300 - total flux cleaned = 0.000490232 Jy ! Component: 350 - total flux cleaned = 0.000911273 Jy ! Component: 400 - total flux cleaned = 0.00123147 Jy ! Component: 450 - total flux cleaned = 0.00156491 Jy ! Component: 500 - total flux cleaned = 0.0019051 Jy ! Component: 550 - total flux cleaned = 0.00199171 Jy ! Component: 600 - total flux cleaned = 0.00204592 Jy ! Component: 650 - total flux cleaned = 0.00217285 Jy ! Component: 700 - total flux cleaned = 0.0023456 Jy ! Component: 750 - total flux cleaned = 0.00241697 Jy ! Component: 800 - total flux cleaned = 0.00250888 Jy ! Component: 850 - total flux cleaned = 0.00257562 Jy ! Component: 900 - total flux cleaned = 0.00268358 Jy ! Component: 950 - total flux cleaned = 0.00274674 Jy ! Component: 1000 - total flux cleaned = 0.00272644 Jy ! Component: 1050 - total flux cleaned = 0.00276688 Jy ! Component: 1100 - total flux cleaned = 0.00274685 Jy ! Component: 1150 - total flux cleaned = 0.00270748 Jy ! Component: 1200 - total flux cleaned = 0.00266874 Jy ! Component: 1250 - total flux cleaned = 0.00270688 Jy ! Component: 1300 - total flux cleaned = 0.00268784 Jy ! Component: 1350 - total flux cleaned = 0.00266902 Jy ! Component: 1400 - total flux cleaned = 0.00261307 Jy ! Component: 1450 - total flux cleaned = 0.0024836 Jy ! Component: 1500 - total flux cleaned = 0.00228077 Jy ! Component: 1550 - total flux cleaned = 0.00215228 Jy ! Component: 1600 - total flux cleaned = 0.0019332 Jy ! Component: 1650 - total flux cleaned = 0.00176946 Jy ! Component: 1700 - total flux cleaned = 0.00157021 Jy ! Component: 1750 - total flux cleaned = 0.00138972 Jy ! Component: 1800 - total flux cleaned = 0.00115563 Jy ! Component: 1850 - total flux cleaned = 0.000939806 Jy ! Component: 1900 - total flux cleaned = 0.000723912 Jy ! Component: 1950 - total flux cleaned = 0.000526061 Jy ! Component: 2000 - total flux cleaned = 0.000309979 Jy ! Component: 2050 - total flux cleaned = 9.33188e-05 Jy ! Component: 2100 - total flux cleaned = -8.75254e-05 Jy ! Component: 2150 - total flux cleaned = -0.000323272 Jy ! Component: 2200 - total flux cleaned = -0.000523356 Jy ! Component: 2250 - total flux cleaned = -0.000760893 Jy ! Component: 2300 - total flux cleaned = -0.00101784 Jy ! Component: 2350 - total flux cleaned = -0.00123908 Jy ! Component: 2400 - total flux cleaned = -0.00146124 Jy ! Component: 2450 - total flux cleaned = -0.00170328 Jy ! Component: 2500 - total flux cleaned = -0.00196543 Jy ! Component: 2550 - total flux cleaned = -0.00215372 Jy ! Component: 2600 - total flux cleaned = -0.00236177 Jy ! Component: 2650 - total flux cleaned = -0.00259014 Jy ! Component: 2700 - total flux cleaned = -0.00285844 Jy ! Component: 2750 - total flux cleaned = -0.00308978 Jy ! Component: 2800 - total flux cleaned = -0.00328376 Jy ! Component: 2850 - total flux cleaned = -0.00355739 Jy ! Component: 2900 - total flux cleaned = -0.00379342 Jy ! Component: 2950 - total flux cleaned = -0.00409047 Jy ! Component: 3000 - total flux cleaned = -0.00430993 Jy ! Component: 3050 - total flux cleaned = -0.00461142 Jy ! Component: 3100 - total flux cleaned = -0.00487456 Jy ! Component: 3150 - total flux cleaned = -0.00511908 Jy ! Component: 3200 - total flux cleaned = -0.00540663 Jy ! Component: 3250 - total flux cleaned = -0.00571703 Jy ! Component: 3300 - total flux cleaned = -0.00600873 Jy ! Component: 3350 - total flux cleaned = -0.00628197 Jy ! Component: 3400 - total flux cleaned = -0.00662088 Jy ! Component: 3450 - total flux cleaned = -0.00687693 Jy ! Component: 3500 - total flux cleaned = -0.00719958 Jy ! Component: 3550 - total flux cleaned = -0.00754631 Jy ! Component: 3600 - total flux cleaned = -0.0078088 Jy ! Component: 3650 - total flux cleaned = -0.00811699 Jy ! Component: 3700 - total flux cleaned = -0.00838325 Jy ! Component: 3750 - total flux cleaned = -0.00862955 Jy ! Component: 3800 - total flux cleaned = -0.00881071 Jy ! Component: 3850 - total flux cleaned = -0.00899331 Jy ! Component: 3900 - total flux cleaned = -0.00917826 Jy ! Component: 3950 - total flux cleaned = -0.00931871 Jy ! Component: 4000 - total flux cleaned = -0.00948428 Jy ! Component: 4050 - total flux cleaned = -0.00965195 Jy ! Total flux subtracted in 4096 components = -0.00977281 Jy ! Clean residual min=-0.001360 max=0.001323 Jy/beam ! Clean residual mean=-0.000007 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.397587 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 565 components and 0.397587 Jy ![Exited script file: muppet] wmap "J1830-4441_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.962 x 80.88 at -17.92 degrees (North through East) ! Clean map min=-0.013996 max=0.2177 Jy/beam ! Writing clean map to FITS file: J1830-4441_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.217695 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000508329 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.700515 0.700515 1.40103 2.80206 5.60412 11.2082 22.4165 44.833 89.666 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.217 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.962 x 80.88 at -17.92 degrees (North through East) ! Clean map min=-0.013996 max=0.2177 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1830-4441_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:17:39 2019