! Started logfile: J1828-2123_S_2017_09_26_pus_uvs.log on Sat May 11 13:04:43 2019 obs J1828-2123_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1828-2123_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.826436 visibilities/baseline/integration-bin. ! Found source: J1828-2123 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 34988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1828-2123_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 536 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 536 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1650 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964558Jy sigma=0.007014 ! Fit after self-cal, rms=0.919450Jy sigma=0.006705 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=14.73 mas, bpa=-18.07 degrees ! Estimated noise=1258.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520591 Jy ! Component: 100 - total flux cleaned = 0.073735 Jy ! Total flux subtracted in 100 components = 0.073735 Jy ! Clean residual min=-0.009842 max=0.017535 Jy/beam ! Clean residual mean=-0.000133 rms=0.003694 Jy/beam ! Combined flux in latest and established models = 0.073735 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.073735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125299Jy sigma=0.000904 ! Fit after self-cal, rms=0.124758Jy sigma=0.000901 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=18.21 mas, bpa=-15.68 degrees ! Estimated noise=639.734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380933 Jy ! Component: 100 - total flux cleaned = 0.0609869 Jy ! Component: 150 - total flux cleaned = 0.076356 Jy ! Component: 200 - total flux cleaned = 0.0870187 Jy ! Total flux subtracted in 200 components = 0.0870187 Jy ! Clean residual min=-0.015491 max=0.028208 Jy/beam ! Clean residual mean=-0.000249 rms=0.006419 Jy/beam ! Combined flux in latest and established models = 0.160754 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 105 components and 0.160754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112429Jy sigma=0.000797 ! Fit after self-cal, rms=0.111300Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.99 HN 0.61 KP 1.13 ! LA 0.70 MK 1.17 NL 2.06 OV 2.02 ! PT 0.74 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.62 KP 1.07 ! LA 0.68 MK 1.18 NL 2.18 OV 2.35 ! PT 0.71 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.56 KP 1.05 ! LA 0.67 MK 1.29 NL 1.94 OV 2.09 ! PT 0.70 ! ! ! Correcting IF 4. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.61 KP 1.00* ! LA 0.60 MK 0.94 NL 1.00* OV 1.13 ! PT 0.83 ! ! ! Fit before self-cal, rms=0.111300Jy sigma=0.000790 ! Fit after self-cal, rms=0.162730Jy sigma=0.000702 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.773 mas, bmaj=19.52 mas, bpa=-14.53 degrees ! Estimated noise=643.789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196565 Jy ! Component: 100 - total flux cleaned = 0.00175922 Jy ! Component: 150 - total flux cleaned = 0.00166476 Jy ! Component: 200 - total flux cleaned = 0.00149485 Jy ! Total flux subtracted in 200 components = 0.00149485 Jy ! Clean residual min=-0.006799 max=0.008551 Jy/beam ! Clean residual mean=-0.000014 rms=0.002312 Jy/beam ! Combined flux in latest and established models = 0.162249 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.162249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162482Jy sigma=0.000701 ! Fit after self-cal, rms=0.165078Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165078Jy sigma=0.000695 ! Fit after self-cal, rms=0.178066Jy sigma=0.000694 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=19.57 mas, bpa=-13.87 degrees ! Estimated noise=622.899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122628 Jy ! Component: 100 - total flux cleaned = 0.00113975 Jy ! Component: 150 - total flux cleaned = 0.000982522 Jy ! Component: 200 - total flux cleaned = 0.000911302 Jy ! Total flux subtracted in 200 components = 0.000911302 Jy ! Clean residual min=-0.005880 max=0.006767 Jy/beam ! Clean residual mean=-0.000015 rms=0.002006 Jy/beam ! Combined flux in latest and established models = 0.16316 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 122 components and 0.16316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177887Jy sigma=0.000694 ! Fit after self-cal, rms=0.178104Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151238 Jy ! Component: 100 - total flux cleaned = -0.000225869 Jy ! Component: 150 - total flux cleaned = -0.000291489 Jy ! Component: 200 - total flux cleaned = -0.000353252 Jy ! Total flux subtracted in 200 components = -0.000353252 Jy ! Clean residual min=-0.005840 max=0.006718 Jy/beam ! Clean residual mean=-0.000016 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.162807 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 130 components and 0.162807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177981Jy sigma=0.000693 ! Fit after self-cal, rms=0.177953Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177953Jy sigma=0.000693 ! Fit after self-cal, rms=0.183236Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.68 mas, bmaj=20.08 mas, bpa=-13.5 degrees ! Estimated noise=613.249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00064394 Jy ! Component: 100 - total flux cleaned = 0.000566297 Jy ! Component: 150 - total flux cleaned = 0.00034832 Jy ! Component: 200 - total flux cleaned = 0.000215147 Jy ! Total flux subtracted in 200 components = 0.000215147 Jy ! Clean residual min=-0.006216 max=0.006222 Jy/beam ! Clean residual mean=-0.000016 rms=0.001920 Jy/beam ! Combined flux in latest and established models = 0.163022 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 133 components and 0.163022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183082Jy sigma=0.000688 ! Fit after self-cal, rms=0.183207Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.07285e-05 Jy ! Component: 100 - total flux cleaned = -1.9044e-05 Jy ! Component: 150 - total flux cleaned = -0.000146576 Jy ! Component: 200 - total flux cleaned = -0.000265536 Jy ! Total flux subtracted in 200 components = -0.000265536 Jy ! Clean residual min=-0.005957 max=0.006181 Jy/beam ! Clean residual mean=-0.000016 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 0.162756 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 134 components and 0.162756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183089Jy sigma=0.000687 ! Fit after self-cal, rms=0.183052Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183052Jy sigma=0.000687 ! Fit after self-cal, rms=0.185496Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.756 mas, bmaj=29.61 mas, bpa=-5.314 degrees ! Estimated noise=734.159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151276 Jy ! Component: 100 - total flux cleaned = 0.00138443 Jy ! Component: 150 - total flux cleaned = 0.00138351 Jy ! Component: 200 - total flux cleaned = 0.00127232 Jy ! Total flux subtracted in 200 components = 0.00127232 Jy ! Clean residual min=-0.009032 max=0.009475 Jy/beam ! Clean residual mean=-0.000018 rms=0.002923 Jy/beam ! Combined flux in latest and established models = 0.164029 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 137 components and 0.164029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185316Jy sigma=0.000687 ! Fit after self-cal, rms=0.185297Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.22476e-05 Jy ! Component: 100 - total flux cleaned = -0.000121252 Jy ! Component: 150 - total flux cleaned = -0.000127273 Jy ! Component: 200 - total flux cleaned = -0.000305549 Jy ! Total flux subtracted in 200 components = -0.000305549 Jy ! Clean residual min=-0.008835 max=0.009360 Jy/beam ! Clean residual mean=-0.000019 rms=0.002894 Jy/beam ! Combined flux in latest and established models = 0.163723 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 137 components and 0.163723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185178Jy sigma=0.000687 ! Fit after self-cal, rms=0.185142Jy sigma=0.000687 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=20.53 mas, bpa=-13.35 degrees ! Estimated noise=610.182 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.665 x 20.53 at -13.35 degrees (North through East) ! Clean map min=-0.0070962 max=0.071293 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.624 mas, bmaj=15.84 mas, bpa=-15.6 degrees ! Estimated noise=1235.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493104 Jy ! Component: 100 - total flux cleaned = 0.0800742 Jy ! Component: 150 - total flux cleaned = 0.102047 Jy ! Component: 200 - total flux cleaned = 0.117773 Jy ! Total flux subtracted in 200 components = 0.117773 Jy ! Clean residual min=-0.009083 max=0.011370 Jy/beam ! Clean residual mean=-0.000048 rms=0.002566 Jy/beam ! Combined flux in latest and established models = 0.117773 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.117773 Jy ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=20.53 mas, bpa=-13.35 degrees ! Estimated noise=610.182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185418 Jy ! Component: 100 - total flux cleaned = 0.028662 Jy ! Component: 150 - total flux cleaned = 0.0327727 Jy ! Component: 200 - total flux cleaned = 0.0341429 Jy ! Total flux subtracted in 200 components = 0.0341429 Jy ! Clean residual min=-0.007259 max=0.009018 Jy/beam ! Clean residual mean=-0.000045 rms=0.002242 Jy/beam ! Combined flux in latest and established models = 0.151916 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 88 components and 0.151916 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.756 mas, bmaj=29.61 mas, bpa=-5.314 degrees ! Estimated noise=734.159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654893 Jy ! Component: 100 - total flux cleaned = 0.00654514 Jy ! Component: 150 - total flux cleaned = 0.00653806 Jy ! Component: 200 - total flux cleaned = 0.00638632 Jy ! Total flux subtracted in 200 components = 0.00638632 Jy ! Clean residual min=-0.009467 max=0.010407 Jy/beam ! Clean residual mean=-0.000045 rms=0.003018 Jy/beam ! Combined flux in latest and established models = 0.158302 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.90477e-07 Jy ! Component: 100 - total flux cleaned = -9.47246e-06 Jy ! Component: 150 - total flux cleaned = -0.000119037 Jy ! Component: 200 - total flux cleaned = -0.000123231 Jy ! Total flux subtracted in 200 components = -0.000123231 Jy ! Clean residual min=-0.009258 max=0.010237 Jy/beam ! Clean residual mean=-0.000044 rms=0.002970 Jy/beam ! Combined flux in latest and established models = 0.158179 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.158179 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=20.53 mas, bpa=-13.35 degrees ! Estimated noise=610.182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130266 Jy ! Component: 100 - total flux cleaned = -0.00208235 Jy ! Component: 150 - total flux cleaned = -0.00197269 Jy ! Component: 200 - total flux cleaned = -0.0017769 Jy ! Total flux subtracted in 200 components = -0.0017769 Jy ! Clean residual min=-0.007084 max=0.007696 Jy/beam ! Clean residual mean=-0.000030 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.156402 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.156402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185100Jy sigma=0.000690 ! Fit after self-cal, rms=0.184723Jy sigma=0.000687 wmodel J1828-2123_S_2017_09_26_pus_map.mod ! Writing 110 model components to file: J1828-2123_S_2017_09_26_pus_map.mod wobs J1828-2123_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1828-2123_S_2017_09_26_pus_uvs.fits wwins J1828-2123_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1828-2123_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285962 Jy ! Component: 100 - total flux cleaned = 0.00427205 Jy ! Component: 150 - total flux cleaned = 0.00597591 Jy ! Component: 200 - total flux cleaned = 0.00777936 Jy ! Component: 250 - total flux cleaned = 0.00976077 Jy ! Component: 300 - total flux cleaned = 0.011048 Jy ! Component: 350 - total flux cleaned = 0.0120337 Jy ! Component: 400 - total flux cleaned = 0.0129008 Jy ! Component: 450 - total flux cleaned = 0.0138947 Jy ! Component: 500 - total flux cleaned = 0.0150092 Jy ! Component: 550 - total flux cleaned = 0.0161621 Jy ! Component: 600 - total flux cleaned = 0.0172133 Jy ! Component: 650 - total flux cleaned = 0.0182375 Jy ! Component: 700 - total flux cleaned = 0.0193048 Jy ! Component: 750 - total flux cleaned = 0.0201521 Jy ! Component: 800 - total flux cleaned = 0.0210449 Jy ! Component: 850 - total flux cleaned = 0.0219811 Jy ! Component: 900 - total flux cleaned = 0.0227761 Jy ! Component: 950 - total flux cleaned = 0.0236755 Jy ! Component: 1000 - total flux cleaned = 0.024675 Jy ! Component: 1050 - total flux cleaned = 0.0254242 Jy ! Component: 1100 - total flux cleaned = 0.0261593 Jy ! Component: 1150 - total flux cleaned = 0.0269926 Jy ! Component: 1200 - total flux cleaned = 0.0276467 Jy ! Component: 1250 - total flux cleaned = 0.0285036 Jy ! Component: 1300 - total flux cleaned = 0.0291358 Jy ! Component: 1350 - total flux cleaned = 0.0297581 Jy ! Component: 1400 - total flux cleaned = 0.0305745 Jy ! Component: 1450 - total flux cleaned = 0.0311762 Jy ! Component: 1500 - total flux cleaned = 0.031869 Jy ! Component: 1550 - total flux cleaned = 0.0325025 Jy ! Component: 1600 - total flux cleaned = 0.032983 Jy ! Component: 1650 - total flux cleaned = 0.0334563 Jy ! Component: 1700 - total flux cleaned = 0.0339239 Jy ! Component: 1750 - total flux cleaned = 0.0343857 Jy ! Component: 1800 - total flux cleaned = 0.0348415 Jy ! Component: 1850 - total flux cleaned = 0.0353809 Jy ! Component: 1900 - total flux cleaned = 0.0356477 Jy ! Component: 1950 - total flux cleaned = 0.0360865 Jy ! Component: 2000 - total flux cleaned = 0.0362604 Jy ! Component: 2050 - total flux cleaned = 0.0366475 Jy ! Component: 2100 - total flux cleaned = 0.0369878 Jy ! Component: 2150 - total flux cleaned = 0.0374081 Jy ! Component: 2200 - total flux cleaned = 0.0377824 Jy ! Component: 2250 - total flux cleaned = 0.0382352 Jy ! Component: 2300 - total flux cleaned = 0.0387244 Jy ! Component: 2350 - total flux cleaned = 0.0391692 Jy ! Component: 2400 - total flux cleaned = 0.0395303 Jy ! Component: 2450 - total flux cleaned = 0.0400471 Jy ! Component: 2500 - total flux cleaned = 0.040244 Jy ! Component: 2550 - total flux cleaned = 0.0406751 Jy ! Component: 2600 - total flux cleaned = 0.040986 Jy ! Component: 2650 - total flux cleaned = 0.0414103 Jy ! Component: 2700 - total flux cleaned = 0.0417936 Jy ! Component: 2750 - total flux cleaned = 0.042098 Jy ! Component: 2800 - total flux cleaned = 0.0425136 Jy ! Component: 2850 - total flux cleaned = 0.0429641 Jy ! Component: 2900 - total flux cleaned = 0.0432993 Jy ! Component: 2950 - total flux cleaned = 0.0436696 Jy ! Component: 3000 - total flux cleaned = 0.0440376 Jy ! Component: 3050 - total flux cleaned = 0.0444039 Jy ! Component: 3100 - total flux cleaned = 0.0449491 Jy ! Component: 3150 - total flux cleaned = 0.045238 Jy ! Component: 3200 - total flux cleaned = 0.0455615 Jy ! Component: 3250 - total flux cleaned = 0.0459548 Jy ! Component: 3300 - total flux cleaned = 0.0462037 Jy ! Component: 3350 - total flux cleaned = 0.0466281 Jy ! Component: 3400 - total flux cleaned = 0.0468745 Jy ! Component: 3450 - total flux cleaned = 0.04719 Jy ! Component: 3500 - total flux cleaned = 0.0475385 Jy ! Component: 3550 - total flux cleaned = 0.047816 Jy ! Component: 3600 - total flux cleaned = 0.0481268 Jy ! Component: 3650 - total flux cleaned = 0.0484702 Jy ! Component: 3700 - total flux cleaned = 0.048778 Jy ! Component: 3750 - total flux cleaned = 0.0491184 Jy ! Component: 3800 - total flux cleaned = 0.0494236 Jy ! Component: 3850 - total flux cleaned = 0.0497271 Jy ! Component: 3900 - total flux cleaned = 0.0499625 Jy ! Component: 3950 - total flux cleaned = 0.0502302 Jy ! Component: 4000 - total flux cleaned = 0.0505633 Jy ! Component: 4050 - total flux cleaned = 0.0506295 Jy ! Total flux subtracted in 4096 components = 0.0508613 Jy ! Clean residual min=-0.001792 max=0.001892 Jy/beam ! Clean residual mean=-0.000014 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.207264 Jy keep ! Adding 406 model components to the UV plane model. ! The established model now contains 516 components and 0.207264 Jy ![Exited script file: muppet] wmap "J1828-2123_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.665 x 20.53 at -13.35 degrees (North through East) ! Clean map min=-0.0050481 max=0.073725 Jy/beam ! Writing clean map to FITS file: J1828-2123_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0737249 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000738124 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.00356 3.00356 6.00712 12.0142 24.0285 48.057 96.1139 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.665 x 20.53 at -13.35 degrees (North through East) ! Clean map min=-0.0050481 max=0.073725 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1828-2123_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:04:49 2019