! Started logfile: J1828-2123_S_2017_06_15_pus_uvs.log on Tue May 7 15:25:48 2019 obs J1828-2123_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1828-2123_S_2017_06_15_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.656773 visibilities/baseline/integration-bin. ! Found source: J1828-2123 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 17260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1828-2123_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 318 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 463 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 433 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1334 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977534Jy sigma=0.007666 ! Fit after self-cal, rms=0.929687Jy sigma=0.007274 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.659 mas, bmaj=7.849 mas, bpa=5.939 degrees ! Estimated noise=1535.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488911 Jy ! Component: 100 - total flux cleaned = 0.0695508 Jy ! Total flux subtracted in 100 components = 0.0695508 Jy ! Clean residual min=-0.009536 max=0.016219 Jy/beam ! Clean residual mean=-0.000225 rms=0.003559 Jy/beam ! Combined flux in latest and established models = 0.0695508 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.0695508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112673Jy sigma=0.000895 ! Fit after self-cal, rms=0.111923Jy sigma=0.000889 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=9.323 mas, bpa=6.664 degrees ! Estimated noise=898.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281824 Jy ! Component: 100 - total flux cleaned = 0.043129 Jy ! Component: 150 - total flux cleaned = 0.0512781 Jy ! Component: 200 - total flux cleaned = 0.0550336 Jy ! Total flux subtracted in 200 components = 0.0550336 Jy ! Clean residual min=-0.016451 max=0.026622 Jy/beam ! Clean residual mean=-0.000410 rms=0.005953 Jy/beam ! Combined flux in latest and established models = 0.124584 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 54 components and 0.124584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105877Jy sigma=0.000829 ! Fit after self-cal, rms=0.105688Jy sigma=0.000827 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.87 FD 1.01 HN 1.83 KP 0.94 ! LA 0.63 MK 1.67 NL 2.07 OV 2.39 ! PT 0.61 SC 1.33 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.32 KP 0.96 ! LA 0.60 MK 1.76 NL 2.18 OV 2.61 ! PT 0.59 SC 1.38 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.38 KP 0.94 ! LA 0.59 MK 1.52 NL 2.20 OV 2.20 ! PT 0.60 SC 1.43 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.105688Jy sigma=0.000827 ! Fit after self-cal, rms=0.222073Jy sigma=0.000712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.867 mas, bmaj=10.66 mas, bpa=8.4 degrees ! Estimated noise=1113.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287127 Jy ! Component: 100 - total flux cleaned = 0.00247348 Jy ! Component: 150 - total flux cleaned = 0.00227577 Jy ! Component: 200 - total flux cleaned = 0.00205444 Jy ! Total flux subtracted in 200 components = 0.00205444 Jy ! Clean residual min=-0.010859 max=0.015555 Jy/beam ! Clean residual mean=-0.000019 rms=0.003627 Jy/beam ! Combined flux in latest and established models = 0.126639 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 59 components and 0.126639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221316Jy sigma=0.000713 ! Fit after self-cal, rms=0.227780Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227780Jy sigma=0.000700 ! Fit after self-cal, rms=0.296387Jy sigma=0.000692 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.051 mas, bmaj=11.14 mas, bpa=7.547 degrees ! Estimated noise=1231.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463787 Jy ! Component: 100 - total flux cleaned = 0.00482992 Jy ! Component: 150 - total flux cleaned = 0.00497759 Jy ! Component: 200 - total flux cleaned = 0.00504384 Jy ! Total flux subtracted in 200 components = 0.00504384 Jy ! Clean residual min=-0.010827 max=0.012498 Jy/beam ! Clean residual mean=0.000047 rms=0.003209 Jy/beam ! Combined flux in latest and established models = 0.131683 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.131683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295992Jy sigma=0.000692 ! Fit after self-cal, rms=0.297047Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178442 Jy ! Component: 100 - total flux cleaned = -0.00010906 Jy ! Component: 150 - total flux cleaned = -5.0591e-05 Jy ! Component: 200 - total flux cleaned = -5.00482e-05 Jy ! Total flux subtracted in 200 components = -5.00482e-05 Jy ! Clean residual min=-0.010523 max=0.011799 Jy/beam ! Clean residual mean=0.000044 rms=0.003106 Jy/beam ! Combined flux in latest and established models = 0.131633 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 63 components and 0.131633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296966Jy sigma=0.000691 ! Fit after self-cal, rms=0.296965Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296965Jy sigma=0.000691 ! Fit after self-cal, rms=0.325254Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.119 mas, bmaj=11.38 mas, bpa=6.632 degrees ! Estimated noise=1277.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209718 Jy ! Component: 100 - total flux cleaned = 0.00217073 Jy ! Component: 150 - total flux cleaned = 0.00224397 Jy ! Component: 200 - total flux cleaned = 0.00224451 Jy ! Total flux subtracted in 200 components = 0.00224451 Jy ! Clean residual min=-0.010272 max=0.011566 Jy/beam ! Clean residual mean=0.000028 rms=0.003119 Jy/beam ! Combined flux in latest and established models = 0.133877 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.133877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325012Jy sigma=0.000689 ! Fit after self-cal, rms=0.325294Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.89217e-06 Jy ! Component: 100 - total flux cleaned = 0.000148497 Jy ! Component: 150 - total flux cleaned = 0.00015193 Jy ! Component: 200 - total flux cleaned = 0.00021632 Jy ! Total flux subtracted in 200 components = 0.00021632 Jy ! Clean residual min=-0.010312 max=0.011002 Jy/beam ! Clean residual mean=0.000029 rms=0.003057 Jy/beam ! Combined flux in latest and established models = 0.134093 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.134093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325168Jy sigma=0.000688 ! Fit after self-cal, rms=0.325142Jy sigma=0.000688 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325142Jy sigma=0.000688 ! Fit after self-cal, rms=0.343129Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.1 mas, bmaj=26.75 mas, bpa=4.823 degrees ! Estimated noise=1265.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301083 Jy ! Component: 100 - total flux cleaned = 0.00310377 Jy ! Component: 150 - total flux cleaned = 0.00318642 Jy ! Component: 200 - total flux cleaned = 0.00325832 Jy ! Total flux subtracted in 200 components = 0.00325832 Jy ! Clean residual min=-0.012942 max=0.012909 Jy/beam ! Clean residual mean=0.000046 rms=0.004154 Jy/beam ! Combined flux in latest and established models = 0.137352 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 67 components and 0.137352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342885Jy sigma=0.000688 ! Fit after self-cal, rms=0.342926Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425499 Jy ! Component: 100 - total flux cleaned = -0.000339892 Jy ! Component: 150 - total flux cleaned = -0.000266156 Jy ! Component: 200 - total flux cleaned = -0.000270498 Jy ! Total flux subtracted in 200 components = -0.000270498 Jy ! Clean residual min=-0.013028 max=0.012844 Jy/beam ! Clean residual mean=0.000044 rms=0.004141 Jy/beam ! Combined flux in latest and established models = 0.137081 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 0.137081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342809Jy sigma=0.000688 ! Fit after self-cal, rms=0.342750Jy sigma=0.000688 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.162 mas, bmaj=11.52 mas, bpa=5.835 degrees ! Estimated noise=1314.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.162 x 11.52 at 5.835 degrees (North through East) ! Clean map min=-0.010264 max=0.087396 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.912 mas, bpa=4.854 degrees ! Estimated noise=2778.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0786006 Jy ! Component: 100 - total flux cleaned = 0.109547 Jy ! Component: 150 - total flux cleaned = 0.124527 Jy ! Component: 200 - total flux cleaned = 0.128254 Jy ! Total flux subtracted in 200 components = 0.128254 Jy ! Clean residual min=-0.014503 max=0.014193 Jy/beam ! Clean residual mean=0.000006 rms=0.003469 Jy/beam ! Combined flux in latest and established models = 0.128254 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.128254 Jy ! Inverting map and beam ! Estimated beam: bmin=4.162 mas, bmaj=11.52 mas, bpa=5.835 degrees ! Estimated noise=1314.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030154 Jy ! Component: 100 - total flux cleaned = 0.003413 Jy ! Component: 150 - total flux cleaned = 0.00386987 Jy ! Component: 200 - total flux cleaned = 0.00406856 Jy ! Total flux subtracted in 200 components = 0.00406856 Jy ! Clean residual min=-0.011078 max=0.011155 Jy/beam ! Clean residual mean=-0.000001 rms=0.003210 Jy/beam ! Combined flux in latest and established models = 0.132323 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.132323 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.1 mas, bmaj=26.75 mas, bpa=4.823 degrees ! Estimated noise=1265.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215831 Jy ! Component: 100 - total flux cleaned = 0.00223406 Jy ! Component: 150 - total flux cleaned = 0.00222798 Jy ! Component: 200 - total flux cleaned = 0.00222486 Jy ! Total flux subtracted in 200 components = 0.00222486 Jy ! Clean residual min=-0.012765 max=0.012945 Jy/beam ! Clean residual mean=0.000019 rms=0.004173 Jy/beam ! Combined flux in latest and established models = 0.134548 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.72777e-05 Jy ! Component: 100 - total flux cleaned = -6.99021e-05 Jy ! Component: 150 - total flux cleaned = -0.000135151 Jy ! Component: 200 - total flux cleaned = -0.00013816 Jy ! Total flux subtracted in 200 components = -0.00013816 Jy ! Clean residual min=-0.012689 max=0.012877 Jy/beam ! Clean residual mean=0.000017 rms=0.004160 Jy/beam ! Combined flux in latest and established models = 0.13441 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.13441 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.162 mas, bmaj=11.52 mas, bpa=5.835 degrees ! Estimated noise=1314.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179113 Jy ! Component: 100 - total flux cleaned = -0.00187764 Jy ! Component: 150 - total flux cleaned = -0.00195475 Jy ! Component: 200 - total flux cleaned = -0.0018866 Jy ! Total flux subtracted in 200 components = -0.0018866 Jy ! Clean residual min=-0.010840 max=0.011111 Jy/beam ! Clean residual mean=0.000001 rms=0.003166 Jy/beam ! Combined flux in latest and established models = 0.132523 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.132523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342715Jy sigma=0.000688 ! Fit after self-cal, rms=0.342463Jy sigma=0.000688 wmodel J1828-2123_S_2017_06_15_pus_map.mod ! Writing 43 model components to file: J1828-2123_S_2017_06_15_pus_map.mod wobs J1828-2123_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1828-2123_S_2017_06_15_pus_uvs.fits wwins J1828-2123_S_2017_06_15_pus_map.win ! wwins: Wrote 1 windows to J1828-2123_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372993 Jy ! Component: 100 - total flux cleaned = 0.00581908 Jy ! Component: 150 - total flux cleaned = 0.00811764 Jy ! Component: 200 - total flux cleaned = 0.00920708 Jy ! Component: 250 - total flux cleaned = 0.0101122 Jy ! Component: 300 - total flux cleaned = 0.0115763 Jy ! Component: 350 - total flux cleaned = 0.0124299 Jy ! Component: 400 - total flux cleaned = 0.0132599 Jy ! Component: 450 - total flux cleaned = 0.0144687 Jy ! Component: 500 - total flux cleaned = 0.0153824 Jy ! Component: 550 - total flux cleaned = 0.0162731 Jy ! Component: 600 - total flux cleaned = 0.0170186 Jy ! Component: 650 - total flux cleaned = 0.0181108 Jy ! Component: 700 - total flux cleaned = 0.0190609 Jy ! Component: 750 - total flux cleaned = 0.0203361 Jy ! Component: 800 - total flux cleaned = 0.0215802 Jy ! Component: 850 - total flux cleaned = 0.0225752 Jy ! Component: 900 - total flux cleaned = 0.0235498 Jy ! Component: 950 - total flux cleaned = 0.0243984 Jy ! Component: 1000 - total flux cleaned = 0.0255449 Jy ! Component: 1050 - total flux cleaned = 0.0266741 Jy ! Component: 1100 - total flux cleaned = 0.0277878 Jy ! Component: 1150 - total flux cleaned = 0.0291807 Jy ! Component: 1200 - total flux cleaned = 0.0305543 Jy ! Component: 1250 - total flux cleaned = 0.0316189 Jy ! Component: 1300 - total flux cleaned = 0.0326696 Jy ! Component: 1350 - total flux cleaned = 0.0339884 Jy ! Component: 1400 - total flux cleaned = 0.0352913 Jy ! Component: 1450 - total flux cleaned = 0.0364864 Jy ! Component: 1500 - total flux cleaned = 0.0379377 Jy ! Component: 1550 - total flux cleaned = 0.0391924 Jy ! Component: 1600 - total flux cleaned = 0.0404334 Jy ! Component: 1650 - total flux cleaned = 0.0417484 Jy ! Component: 1700 - total flux cleaned = 0.0431376 Jy ! Component: 1750 - total flux cleaned = 0.0444268 Jy ! Component: 1800 - total flux cleaned = 0.0457889 Jy ! Component: 1850 - total flux cleaned = 0.0470551 Jy ! Component: 1900 - total flux cleaned = 0.0481437 Jy ! Component: 1950 - total flux cleaned = 0.0495557 Jy ! Component: 2000 - total flux cleaned = 0.0506274 Jy ! Component: 2050 - total flux cleaned = 0.0518551 Jy ! Component: 2100 - total flux cleaned = 0.053236 Jy ! Component: 2150 - total flux cleaned = 0.0545272 Jy ! Component: 2200 - total flux cleaned = 0.0555703 Jy ! Component: 2250 - total flux cleaned = 0.0570059 Jy ! Component: 2300 - total flux cleaned = 0.0582739 Jy ! Component: 2350 - total flux cleaned = 0.0592982 Jy ! Component: 2400 - total flux cleaned = 0.0607089 Jy ! Component: 2450 - total flux cleaned = 0.0617221 Jy ! Component: 2500 - total flux cleaned = 0.0630406 Jy ! Component: 2550 - total flux cleaned = 0.0641208 Jy ! Component: 2600 - total flux cleaned = 0.0652724 Jy ! Component: 2650 - total flux cleaned = 0.0664968 Jy ! Component: 2700 - total flux cleaned = 0.0674124 Jy ! Component: 2750 - total flux cleaned = 0.0680226 Jy ! Component: 2800 - total flux cleaned = 0.0685561 Jy ! Component: 2850 - total flux cleaned = 0.0691663 Jy ! Component: 2900 - total flux cleaned = 0.0695479 Jy ! Component: 2950 - total flux cleaned = 0.0699303 Jy ! Component: 3000 - total flux cleaned = 0.0704668 Jy ! Component: 3050 - total flux cleaned = 0.0709271 Jy ! Component: 3100 - total flux cleaned = 0.071312 Jy ! Component: 3150 - total flux cleaned = 0.0716976 Jy ! Component: 3200 - total flux cleaned = 0.0720071 Jy ! Component: 3250 - total flux cleaned = 0.0723172 Jy ! Component: 3300 - total flux cleaned = 0.072707 Jy ! Component: 3350 - total flux cleaned = 0.0729419 Jy ! Component: 3400 - total flux cleaned = 0.0732572 Jy ! Component: 3450 - total flux cleaned = 0.0734945 Jy ! Component: 3500 - total flux cleaned = 0.0737338 Jy ! Component: 3550 - total flux cleaned = 0.0740534 Jy ! Component: 3600 - total flux cleaned = 0.0742149 Jy ! Component: 3650 - total flux cleaned = 0.0743771 Jy ! Component: 3700 - total flux cleaned = 0.074459 Jy ! Component: 3750 - total flux cleaned = 0.0747062 Jy ! Component: 3800 - total flux cleaned = 0.0748725 Jy ! Component: 3850 - total flux cleaned = 0.0748728 Jy ! Component: 3900 - total flux cleaned = 0.0750418 Jy ! Component: 3950 - total flux cleaned = 0.0752125 Jy ! Component: 4000 - total flux cleaned = 0.0752979 Jy ! Component: 4050 - total flux cleaned = 0.0754712 Jy ! Total flux subtracted in 4096 components = 0.0754709 Jy ! Clean residual min=-0.004555 max=0.004546 Jy/beam ! Clean residual mean=0.000161 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.207994 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 369 components and 0.207994 Jy ![Exited script file: muppet] wmap "J1828-2123_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.162 x 11.52 at 5.835 degrees (North through East) ! Clean map min=-0.0082865 max=0.099733 Jy/beam ! Writing clean map to FITS file: J1828-2123_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0997329 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00187457 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.63876 5.63876 11.2775 22.555 45.1101 90.2201 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0056 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.162 x 11.52 at 5.835 degrees (North through East) ! Clean map min=-0.0082865 max=0.099733 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1828-2123_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:25:53 2019